Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Additives (3)
- Laser metal deposition (3)
- Additive manufacturing (2)
- Deposition (2)
- Metallic glass (2)
-
- 3D Bioprinting (1)
- Acoustic emission (1)
- Additive Manufacturing (1)
- Adipose stem cell (1)
- Aluminum (1)
- Amorphous structures (1)
- Angle of Incidence (1)
- Beams and girders (1)
- Bioactive glass (1)
- Biofabrication (1)
- Biomimetic (1)
- Biopolymer/bioactive glass composite (1)
- Bioprinting (1)
- Borate bioactive glass (1)
- Bottom-up and top-down (1)
- Ceramics industry (1)
- Classic nucleation theories (1)
- Clustering analysis (1)
- Complex parts (1)
- Composite (1)
- Composition deviation (1)
- Corrosion resistance (1)
- Cost effective (1)
- Cost effectiveness (1)
- Critical challenges (1)
- Publication
-
- Mechanical and Aerospace Engineering Faculty Research & Creative Works (39)
- Materials Science and Engineering Faculty Research & Creative Works (4)
- Biological Sciences Faculty Research & Creative Works (2)
- Engineering Management and Systems Engineering Faculty Research & Creative Works (1)
- Mathematics and Statistics Faculty Research & Creative Works (1)
Articles 1 - 30 of 47
Full-Text Articles in Mechanical Engineering
Structural Responses Of Metallic Glasses Under Neutron Irradiation, L. Yang, H. Y. Li, P. W. Wang, S. Wu, G. Guo, B. Liao, Q. L. Guo, X. Q. Fan, P. Huang, H. B. Lou, F. M. Guo, Q. Zeng, T. Sun, Y. Ren, Lianyi Chen
Structural Responses Of Metallic Glasses Under Neutron Irradiation, L. Yang, H. Y. Li, P. W. Wang, S. Wu, G. Guo, B. Liao, Q. L. Guo, X. Q. Fan, P. Huang, H. B. Lou, F. M. Guo, Q. Zeng, T. Sun, Y. Ren, Lianyi Chen
Mechanical and Aerospace Engineering Faculty Research & Creative Works
No abstract provided.
Investigation On Ti6al4v-V-Cr-Fe-Ss316 Multi-Layers Metallic Structure Fabricated By Laser 3d Printing, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer
Investigation On Ti6al4v-V-Cr-Fe-Ss316 Multi-Layers Metallic Structure Fabricated By Laser 3d Printing, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Joining titanium alloy and stainless steel is becoming an urgent need since their outstanding mechanical properties can be utilized integratedly. However, direct fusion joining of Ti6Al4V to SS316 can cause brittle Ti-Fe intermetallics which compromise join bonds’ mechanical properties. In this research, Laser 3D Printing was applied to explore a new Ti6Al4V to SS316 multi-metallic structure. A novel filler transition route was introduced (Ti6Al4V → V → Cr → Fe → SS316) to avoid the Ti-Fe intermetallics. Two experimental cases were performed for comparison to evaluate this novel route’s effect. In the first case, SS316 layer was directly deposited on …
Experimental Measurement Of Residual Stress And Distortion In Additively Manufactured Stainless Steel Components With Various Dimensions, M. Ghasri-Khouzani, H. Peng, R. Rogge, R. Attardo, P. Ostiguy, J. Neidig, R. Billo, D. Hoelzle, M. R. Shankar
Experimental Measurement Of Residual Stress And Distortion In Additively Manufactured Stainless Steel Components With Various Dimensions, M. Ghasri-Khouzani, H. Peng, R. Rogge, R. Attardo, P. Ostiguy, J. Neidig, R. Billo, D. Hoelzle, M. R. Shankar
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Disk-shaped 316L stainless steel parts with various diameters and heights were additively manufactured using a direct metal laser sintering (DMLS) technique. Neutron diffraction was used to profile the residual stresses in the samples before and after removal of the build plate and support structures. Moreover, distortion level of the parts before and after the removal was quantified using a coordinate measuring machine (CMM). Large tensile in-plane stresses (up to ≈ 400 MPa) were measured near the as-built disk top surfaces, where the stress magnitude decreased from the disk center to the edges. The stress gradient was steeper for the disks …
Broadband Infrared Absorbers With Stacked Double Chromium Ring Resonators, H. Deng, L. Stan, D. Czaplewski, Jie Gao, Xiaodong Yang
Broadband Infrared Absorbers With Stacked Double Chromium Ring Resonators, H. Deng, L. Stan, D. Czaplewski, Jie Gao, Xiaodong Yang
Mechanical and Aerospace Engineering Faculty Research & Creative Works
No abstract provided.
Spiraling Light With Magnetic Metamaterial Quarter-Wave Turbines, J. Zeng, T. S. Luk, Jie Gao, Xiaodong Yang
Spiraling Light With Magnetic Metamaterial Quarter-Wave Turbines, J. Zeng, T. S. Luk, Jie Gao, Xiaodong Yang
Mechanical and Aerospace Engineering Faculty Research & Creative Works
No abstract provided.
Studying Chromium And Nickel Equivalency To Identify Viable Additive Manufacturing Stainless Steel Chemistries, Zachary T. Hilton, Joseph William Newkirk, Ronald J. O'Malley
Studying Chromium And Nickel Equivalency To Identify Viable Additive Manufacturing Stainless Steel Chemistries, Zachary T. Hilton, Joseph William Newkirk, Ronald J. O'Malley
Materials Science and Engineering Faculty Research & Creative Works
Chromium and nickel equivalency modeling has long been used in welding to determine the weldability of steel chemistries. A study was conducted to determine the applicability of Cr-Ni modeling to the additive manufacturing process. Many AM methods involve rapid solidification of small melt pools, similar to welding. Chemistries with varying Cr/Ni ratios were selected for use in a selective laser melting process and modeled using known models. Initial results indicate that the standard "safe welding zone" may not directly apply to additive manufacturing. The capability to build with chemistries outside the weldability “safe zone” could result in improved and varied …
Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Through using Zr intermediate layers, Zr52.5Ti5Al10Ni14.6Cu17.9 metallic glass (MG) parts are successfully built on Ti-6Al-4V substrates by laser-foil-printing (LFP) additive manufacturing technology in which MG foils are laser welded layer-by-layer onto the substrate. The printed MG part is free of porosity, cracking and crystallization; additionally, its glass transition temperature, crystallization temperature, micro-hardness, and tensile strength are very similar to the original MG material. The Zr intermediate layers are aimed at preventing direct interaction between the first layer of MG foil and the Ti substrate; otherwise, the welded MG foils would peel …
Towards Defect Detection In Metal Slm Parts Using Modal Analysis "Fingerprinting", James Urban, Nick E. Capps, Brian M. West, Troy Hartwig, Ben Brown, Robert G. Landers, Douglas A. Bristow, Edward C. Kinzel
Towards Defect Detection In Metal Slm Parts Using Modal Analysis "Fingerprinting", James Urban, Nick E. Capps, Brian M. West, Troy Hartwig, Ben Brown, Robert G. Landers, Douglas A. Bristow, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The validation of Additively Manufactured (AM) materials is a difficult and expensive process because the local engineering properties are a function of the thermal history. The thermal history varies with the process parameters, as well as the part geometry. This paper presents a case study using modal testing to identify defects in realistic AM parts. A setup consisting of a Scanning Laser Doppler Vibrometer (LDV) was used to identify the resonant frequencies for several geometrically identical parts on a build plate. Parts with suboptimal process parameters from purposely varying the process parameters, are identified by a shift in the mode …
Construction Of Metallic Glass Structures By Laser-Foil-Printing Technology, Yiyu Shen, Yingqi Li, Hai-Lung Tsai
Construction Of Metallic Glass Structures By Laser-Foil-Printing Technology, Yiyu Shen, Yingqi Li, Hai-Lung Tsai
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Metallic glasses (MGs) have superior mechanical properties such as high tensile strength, hardness, and corrosion resistance, as compared to crystalline metals. Although newly developed MGs have significantly reduced critical cooling rates down to 10 K/s, products of MGs are still limited to simple geometries such as foils/plates or rods with thin section-thickness which is mainly caused by the decrease of thermal conductivities of the new MGs. Recently, we developed a new Laser-foil-printing (LFP) additive manufacturing technology which welds foils, layer by layer, to construct desired 3D structures. With the LFP and Zr-based amorphous foils, 3D, large amorphous structures with complex …
Aluminum Matrix Syntactic Foam Fabricated With Additive Manufacturing, M. Spratt, Joseph William Newkirk, K. Chandrashekhara
Aluminum Matrix Syntactic Foam Fabricated With Additive Manufacturing, M. Spratt, Joseph William Newkirk, K. Chandrashekhara
Materials Science and Engineering Faculty Research & Creative Works
Syntactic foams are lightweight structural composites with hollow reinforcing particles embedded in a soft matrix. These materials have applications in transportation, packaging, and armor due to properties such as relatively high specific stiffness, acoustic dampening, and impact absorption. Aluminum matrices are the most widely studied of metal matrix syntactic foams, but there is little to no research in regards to processing the foams with additive manufacturing. It is theorized that the fast cooling rates and limited kinetic energy input of additive could reduce two issues commonly associated with processing syntactic foams: microsphere flotation in the melt and microsphere fracture during …
Development Of A Hybrid Manufacturing Process For Precision Metal Parts, Leon Hill, Todd E. Sparks, Frank W. Liou
Development Of A Hybrid Manufacturing Process For Precision Metal Parts, Leon Hill, Todd E. Sparks, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper summarizes the research and development of a hybrid manufacturing process to produce fully dense metal parts with CNC-level precision. High performance metals, such as titanium alloys, nickel superalloys, tool steels, stainless steels, etc. can benefit from this process. Coupling the additive and the subtractive processes into a multi-axis workstation, the hybrid process, can produce and repair metal parts with accuracy. The surface quality of the final product is similar to the industrial milling capability. To achieve such a system, issues of the metal deposition process and the automated process planning of the hybrid manufacturing process will be discussed.
Review Of Am Simulation Validation Techniques, Aaron Flood, Frank W. Liou
Review Of Am Simulation Validation Techniques, Aaron Flood, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Due to the complexity of Additive Manufacturing (AM), it can require many trial runs to obtain processing parameters which produce a quality build. Because of this trial and error process, the drive for simulations of AM has grown significantly. Simulations only become useful to researchers if it can be shown that they are true representations of the physical process being simulated. All simulations have different methods of validation to show that they are an accurate representations of the process. This paper explores the various methodologies for validation of laser based metal AM simulations, focusing mainly on the modeling of the …
Defects Classification Of Laser Metal Deposition Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou
Defects Classification Of Laser Metal Deposition Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser metal deposition (LMD) is an advanced additive manufacturing (AM) process used to build or repair metal parts layer by layer for a range of different applications. Any presence of deposition defects in the part produced causes change in the mechanical properties and might cause failure to the part. In this work, defects monitoring system was proposed to detect and classify defects in real time using an acoustic emission (AE) sensor and an unsupervised pattern recognition analysis. Time domain and frequency domain, and relevant descriptors were used in the classification process to improve the characterization and the discrimination of the …
Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas
Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70 ⁰C to melt the PCL. The part is then …
Design And Fabrication Of Functionally Graded Material From Ti To Γ-Tial By Laser Metal Deposition, Xueyang Chen, Lei Yan, Joseph William Newkirk, Frank W. Liou
Design And Fabrication Of Functionally Graded Material From Ti To Γ-Tial By Laser Metal Deposition, Xueyang Chen, Lei Yan, Joseph William Newkirk, Frank W. Liou
Materials Science and Engineering Faculty Research & Creative Works
Functionally graded material (FGM) is one kind of advanced material characterized by a gradual change in properties as the position varies. The spatial variation of compositional and microstructure over volume is aimed to control corresponding functional properties. In this research, when 100% γ-TiAl was directly deposited on pure Ti substrate, cracks were formed within the γ-TiAl layer. Then a six-layer crack-free functionally graded material of Ti/TiAl was designed and fabricated by laser metal deposition (LMD) method, with composition changing from pure Ti on one side to 100% γ-TiAl on the other side. The fabricated FGM was characterized for material properties …
Effects Of Area Fraction And Part Spacing On Degradation Of 304l Stainless Steel Powder In Selective Laser Melting, Cairlin S. Kriewall, Austin T. Sutton, Sreekar Karnati, Joseph William Newkirk, Ming-Chuan Leu
Effects Of Area Fraction And Part Spacing On Degradation Of 304l Stainless Steel Powder In Selective Laser Melting, Cairlin S. Kriewall, Austin T. Sutton, Sreekar Karnati, Joseph William Newkirk, Ming-Chuan Leu
Materials Science and Engineering Faculty Research & Creative Works
In selective laser melting (SLM) systems, a large portion of powder remains unconsolidated and therefore recycling powder could make SLM more economical. Currently, a lack of literature exists specifically targeted at studying the reusability of powder. Furthermore, the definition of powder reusability is complex since powder degradation depends on many factors. The goal of the current research is to investigate the effects of area fraction and part spacing on the degradation of 304L powder in SLM. An experimental study was conducted where various area fractions and part distances were chosen and powder characterization techniques for determination of particle size distributions, …
Characterization Of Heat-Affected Powder Generated During Selective Laser Melting Of 304l Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk
Characterization Of Heat-Affected Powder Generated During Selective Laser Melting Of 304l Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The selective laser melting (SLM) process is an Additive Manufacturing (AM) technique that uses a laser to fuse successive layers of powder into near fully dense components. Due to the large energy input from the laser during processing, vaporization and instabilities in the melt pool occur causing the formation of condensate and laser spatter, collectively known as heat-affected powder. Since heat-affected powder settles into the powder bed, the properties of the unconsolidated powder may be altered compromising its reusability. In this study, characterization of 304L heat-affected powder was performed through particle size distribution measurements, x-ray diffraction, metallography, energy-dispersive spectroscopy mapping, …
Influence Of Gage Length On Miniature Tensile Characterization Of Powder Bed Fabricated 304l Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, Joseph William Newkirk
Influence Of Gage Length On Miniature Tensile Characterization Of Powder Bed Fabricated 304l Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Miniature tensile specimens with varying aspect ratios were fabricated from 304L stainless steel (SS) made using powder bed additive manufacturing (AM) process. The tensile characteristics measured from these specimens were analyzed to assess the impact of gage length. The study found no impact upon varying gage length on yield and ultimate strength measurements. However, a significant impact was observed on strain measurements. This data was also used to perform Weibull statistics to estimate the stochastic performance of the material. Fractography was performed to visually identify the types of flaws. A comparative study with specimens fabricated from cold rolled annealed 304 …
A Two-Dimensional Simulation Of Grain Structure Growth Within Substrate And Fusion Zone During Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, Joseph William Newkirk
A Two-Dimensional Simulation Of Grain Structure Growth Within Substrate And Fusion Zone During Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
In this paper, a predictive model based on a cellular automaton (CA)-finite element (FE) method has been developed to simulate thermal history and microstructure evolution during metal solidification for a laser-based additive manufacturing process. The macroscopic FE calculation that is validated by thermocouple experiment is designed to update the temperature field and a high cooling rate. A cellular automata-finite element (CAFE) method is developed to describe grain growth in the fusion zone. In the mesoscopic CA model, heterogeneous nucleation sites, grain growth orientation and rate, epitaxial growth, remelting of preexisting grains, metal addition, grain competitive growth, and columnar to equiaxed …
Bonding Of 304l Stainless Steel To Cast Iron By Selective Laser Melting, Baily Thomas, Austin T. Sutton, Ming-Chuan Leu, Nikhil Doiphode
Bonding Of 304l Stainless Steel To Cast Iron By Selective Laser Melting, Baily Thomas, Austin T. Sutton, Ming-Chuan Leu, Nikhil Doiphode
Mechanical and Aerospace Engineering Faculty Research & Creative Works
While cast iron is widely used in industry, a major limitation is the weldability of a dissimilar material onto cast iron due to hot cracking as a result of lack of ductility from graphite flakes. Consequently, a significant amount of preheat is often employed to reduce the cooling rate in the fusion zone, which, however, may lead to distortion of the welded parts. A potential remedy could be the Selective Laser Melting (SLM) process, where only small melt pools are created and thus the overall energy input is reduced. The present paper describes an investigation of the SLM process to …
Fabricating Zirconia Components With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas
Fabricating Zirconia Components With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70°C to melt the PCL. The part is then sintered …
Mechanical Properties Of 304l Parts Made By Laser-Foil-Printing Technology, Chia-Hung Hung, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Mechanical Properties Of 304l Parts Made By Laser-Foil-Printing Technology, Chia-Hung Hung, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser-Foil-Printing (LFP) is a novel laminated object manufacturing process for metal additive manufacturing. It fabricates three-dimensional metal parts by using a dual-laser system to weld and cut metal foils layer by layer. A main advantage of LFP is the higher cooling rate compared to powder-based laser additive manufacturing processes due to the thermal conductivity difference between foil and powder. This study focuses on the mechanical properties of 304L stainless steel parts built by the LFP process. The experimental results indicate that the yield strength and ultimate tensile strength of LFP fabricated 304L SS parts are higher by 9% and 8% …
Additive Manufacturing Of High Entropy Alloys -- A Review, Wenyuan Cui, Xinchang Zhang, Frank W. Liou
Additive Manufacturing Of High Entropy Alloys -- A Review, Wenyuan Cui, Xinchang Zhang, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
High-entropy alloys have attracted increasingly interest due to their unique compositions, microstructures and mechanical properties. Additive manufacturing has been recognized as a promising technology to fabricate the high-entropy alloys in the recent years. The purpose of this paper is to review the current research progress in high-entropy alloys by additive manufacturing process. It will first highlight the important theory of the high-entropy alloys. The next aspect is to summarize current additive manufacturing methods applied for the high entropy alloys. At last, the correlation between the microstructures and the mechanical properties of the high-entropy alloys will be examined and discussed.
Fiber-Fed Laser-Heated Process For Printing Transparent Glass, John M. Hostetler, Jonathan T. Goldstein, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Fiber-Fed Laser-Heated Process For Printing Transparent Glass, John M. Hostetler, Jonathan T. Goldstein, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper presents the Additive Manufacturing (AM) of glass using a fiber-fed process. Glass fiber with a diameter of 100 μm is fed into a laser generated melt pool. A CO2 laser beam is focused on the intersection between the fiber and the work piece which is positioned on a four-axis computer controlled stage. The laser energy at λ=10.6 μm is directly absorbed by the silica and locally heats the glass above the working point. By carefully controlling the laser power, scan speed, and feed rate, bubble free shapes can be deposited including trusses and basic lenses. Issues unique …
Metallic Components Repair Strategies Using The Hybrid Manufacturing Process, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou
Metallic Components Repair Strategies Using The Hybrid Manufacturing Process, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The hybrid manufacturing process which integrates additive manufacturing with subtractive machining is competitive and promising in component repair. To automate this process, detecting the missing volume and generating the deposition tracks is the key. In this study, strategies for repairing defects on flat and non-flat surfaces were investigated. A cost-effective reverse engineering tool was utilized to reconstruct STL models of damaged objects. Point data of the fracture surface on flat surfaces was obtained to generate the tool path for material building up. For defects on non-flat surfaces, the damaged model was best-fitted with the nominal model. Then both models were …
Relating Processing Of Selective Laser Melted Structures To Their Material And Modal Properties, Nicholas E. Capps, James S. Urban, Brian M. West, Cody S. Lough, Adriane Repogle, Troy Hartwig, Ben Brown, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Relating Processing Of Selective Laser Melted Structures To Their Material And Modal Properties, Nicholas E. Capps, James S. Urban, Brian M. West, Cody S. Lough, Adriane Repogle, Troy Hartwig, Ben Brown, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Selective Laser Melting (SLM) creates metal parts by fusing powder layer-by-layer. It provides significant design flexibility and the possibility of low-volume production. The engineering properties of the printed metal are a function of the local thermal history. This creates challenges for validating Additively Manufactured (AM) parts. This paper correlates the engineering properties (density, modulus, yield strength and ultimate strength) for tensile test specimens created with different process parameters with the resonant frequencies determined using modal testing. The paper shows that yield and ultimate strengths for these specimens can be determined using modal analysis.
Effect Of Optimizing Particle Size In Laser Metal Deposition With Blown Pre-Mixed Powders, Wei Li, Jingwei Zhang, Xinchang Zhang, Sreekar Karnati, Frank W. Liou
Effect Of Optimizing Particle Size In Laser Metal Deposition With Blown Pre-Mixed Powders, Wei Li, Jingwei Zhang, Xinchang Zhang, Sreekar Karnati, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Functionally Graded Material (FGM) is often fabricated by Laser metal deposition with pre-mixed multiple powders (PMM-powder). Since the supplied PMM-powder directly affects FGM’s composition, investigation on PMM-powder’s property is greatly needed. This paper employed experimental method to observe an important problem: PMM-powder separation in fabricating FGM. A novel particle size optimization method was introduced as solution to eliminate the powder separation. Pre-mixed pure Cu and 4047 Al powders were used to do two experiments. The first experiment result disclosed the existence of powder separation. By optimizing the particle size, the PMM-powder separation was effectively solved in the second experiment result.
Thermal Modeling Of 304l Stainless Steel Selective Laser Melting, Lan Li, Cody S. Lough, Adriane Repogle, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Thermal Modeling Of 304l Stainless Steel Selective Laser Melting, Lan Li, Cody S. Lough, Adriane Repogle, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper describes the continuum thermal modeling of the Selective Laser Melting (SLM) process for 304L stainless steel using Abaqus. Temperature dependent thermal properties are obtained from literature and incorporated into the model capturing the change from powder to fully dense stainless steel. The thermal model predicts the temperature history for multi-track scans under different process parameters (laser power, effective scanning speed, hatch spacing) which is used to extract the melt-pool size, solidification rate, and temperature gradients. These are compared to experimental results obtained from a Renishaw AM250 in terms of the melt pool size, grain structure, and cell spacing. …
Investigation Of Build Strategies For A Hybrid Manufacturing Process Progress On Ti-6al-4v, Lei Yan, Leon Hill, Frank W. Liou, Joseph William Newkirk
Investigation Of Build Strategies For A Hybrid Manufacturing Process Progress On Ti-6al-4v, Lei Yan, Leon Hill, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The various processing parameters of a hybrid manufacturing process, including deposition and machining, is being investigated with a Design of Experiment (DoE). The intent was to explore the effect of different build strategies on the final part’s Vickers hardness, tensile test, fatigue life, and microstructure. From this experiment, the processing parameters can be linked to various mechanical properties. This will lead to the ability to create a combination of deposition and machining parameters, which will result in improved mechanical properties.
Realizing Structural Color Generation With Aluminum Plasmonic V-Groove Metasurfaces, W. Wang, D. Rosenmann, D. Czaplewski, Xiaodong Yang, Jie Gao
Realizing Structural Color Generation With Aluminum Plasmonic V-Groove Metasurfaces, W. Wang, D. Rosenmann, D. Czaplewski, Xiaodong Yang, Jie Gao
Mechanical and Aerospace Engineering Faculty Research & Creative Works
No abstract provided.