Mechanical Engineering Commons^™

Head Impact Effects In Small Remotely Piloted Aircraft System (Srpas) Collisions: Gender Specific Risks And Vulnerable Population Protection, Md Farhan Hoque Sagar

Electronic Thesis and Dissertation Repository

This study focuses on supporting the development of safety regulations for vulnerable populations during drone to head impacts. First, the small female head and neck model was compared to cadaveric data. Then, combined with lab’s previous work, gender-based disparities in head impact responses were highlighted, with small females experiencing higher injury risk metrics, despite lower skull von Mises stress. Beyond small females, children of various ages and their head responses during impacts were also analyzed. In addition to the previously developed quadcopter drone model, a new Mavic Pro drone model was developed, and this model was integrated with human head …

Design Of Machine Tool Cross Beam Using Metal Big Area Additive Manufacturing, Tyler Poon

Masters Theses

The modern world would not be what it is now without machine tools. Advances in materials and processes, such as carbon fiber and additive manufacturing (AM), enable the design space for machine tool components to expand. However, machine tool components require accurate geometry, which is not available from parts produced by metal Big Area Additive Manufacturing (mBAAM). This project outlines the process in which a traditionally manufactured machine tool component, a welded box structure on an existing machine tool, was redesigned to be made using mBAAM. The goal was to design a structure that was printable using the MedUSA system …

The Effect Of Soft Tissue And Bone Morphology On The Stresses In The Foot And Ankle, Jinhyuk Kim

Mechanical & Aerospace Engineering Theses & Dissertations

The foot and ankle interface with the ground, thus they absorb reaction forces and initiate load distribution through the body. The plantar fascia (PF) is a flexible structure that absorbs reaction forces and distributes loading across the foot. It is frequently a source of foot pain especially when people have plantar fasciitis and/or diabetes mellitus. Finite element (FE) models of the foot and ankle were created to examine the function however, the plantar fascia is frequently modeled as a 1D tension only spring, which does not represent variations caused by injury and/or disease.

As models move toward being patient specific, …

Electromagnetic Modeling Of A Wind Tunnel Magnetic Suspension And Balance System, Desiree Driver

Mechanical & Aerospace Engineering Theses & Dissertations

Wind tunnels are used to study forces and moments acting on an aerodynamic body. While most results involve some interference from the mechanical supports used to hold the model, a Magnetic Suspension and Balance System (MSBS) is void of these interferences and presents an ideal test scenario. To further investigate the feasibility of dynamic stability testing at supersonic speeds using a MSBS, a preliminary design idea is currently being developed using an existing MSBS in a subsonic wind tunnel. This review focuses on the development of a mathematical model to more accurately portray the capabilities of the 6 inch Massachusetts …

Method Of Embedded Imperfections For The Direct Simulation Of Deformation Instabilities In Film-Substrate Structures, Siavash Nikravesh Kazeroni

Mechanical Engineering ETDs

In this dissertation, a novel finite-element methodology called “embedded imperfections” is proposed and employed for computationally simulating various types of deformation instabilities observed in film-substrate structures subjected to mechanical loading. The approach involves the incorporation of elements having distinctive material properties within the film-substrate interface. One can interpret this practice as a deliberate distribution of material defects within the numerical model. It has been shown that embedded imperfections not only can trigger the onset of instability, but also can lead to “direct” simulation of deformation instability problems in that primary and subsequent instability modes can all be captured in a …

Analysis Guidelines And Functionalities Of The Catia Native Fea Solver For Composite Materials, Mohamed Edrisy

Electronic Theses and Dissertations

The emergence of commercial FEA solvers was a significant breakthrough that boosted the accuracy and complexity of engineering design. While composite materials are special materials, their mechanical properties can be custom made by considering the needs and requirements of the design problem. Given the rapidly expanding global consumption of composite materials, access to FEA solvers capable of assigning these materials is an absolute requirement.The CATIA software is a platform for designing, analyzing, and manufacturing of parts. However, there is no meaningful documentation in the public domain exploring the finite element functionalities of CATIA software for composite materials. Isotropic materials are …

Pymoocfd - A Multi-Objective Optimization Framework For Cfd, George Martin Cunningham Love

Graduate College Dissertations and Theses

Modern computational resource have solidified the use of computer modeling as an integral part of the engineering design process. This is particularly impressive when it comes to high-dimensional models such as computational fluid dynamics (CFD) models. CFD models are now capable of producing results with a level of confidence that would previously have required physical experimentation. Simultaneously, the development of machine learning techniques and algorithms has increased exponentially in recent years. This acceleration is also due to the widespread availability of modern computational resources. Thus far, the cross-over between these fields has been mostly focused on computer models with low …

Structural And Hemodynamic Analysis Of Transcatheter Aortic Valves, Dong Qiu

Electronic Theses and Dissertations

The transcatheter aortic valve replacement (TAVR) procedure has become a well-established procedure for high, intermediate-risk, and low-risk patients. However, there is limited clinical data on the TAV's long-term durability, unlike SAV devices. Computational simulations can be an alternative way to evaluate the TAV devices. This dissertation aims to conduct structural and hemodynamic analyses on the TAV devices under different conditions using computational simulation approaches.

Initially, the impact of the bicuspid aortic valve on the TAV devices was evaluated. The result indicated that the CoreValve-like supra-annular self-expandable device was likely to have increased stress and strain on the leaflet when it …

Optimized Tip Cooling Using Am Process, Alberto H. Gamez, Lourdes Sarmiento Martinez, Andrew Van Bogelen

Mechanical Engineering

This Final Design Review (FDR) reports on the senior design project undertaken by our team of mechanical engineering seniors at California Polytechnic State University, San Luis Obispo. This project seeks to use the additive manufacturing process to improve the existing design of a Taurus 60 gas turbine injector tip. The current injector tip is owned by Solar Turbines, a designer and manufacturer of gas turbines for electric generation, propulsion, as well as natural resource transportation. The challenge at hand is to design a new injector tip that will be reliable for at least 60,000 hours and provide ease of replacement, …

Mechanical Interfacial Locking And Multiscale Modeling Of Reinforced Thermoplastic Composites For Structural Applications, Anmol Kothari

All Dissertations

The ever-growing pressure of reducing the adverse impact of transportation systems on environment has pushed industries towards fuel-efficient and sustainable solutions. While several approaches have been used to improve fuel efficiency, the light-weighting of structural components has proven broadly effective. In this regard, reinforced thermoplastic composites (RTPC), owing to their high recyclability, higher impact strength and fast cycle times, have become competitive candidates at an industrial scale. However, to implement RTPC toward large scale structural applications several challenges pertaining to material design and manufacturing effects need to be addressed. To this end, a computational study is carried out to address …

A Manufacturing-To-Response Pathway For Formed Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Theses

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …

Investigation Of Small Remotely Piloted Aircraft System (Srpas) To Human Head Impact, Yuhu Weng

Electronic Thesis and Dissertation Repository

Small remotely piloted aircraft system (sRPAS) to ground human head impact could cause injuries to the public. Skull fractures and brain injuries have been observed in sRPAS-related impacts, which varied in angles, locations and velocities. This study developed a representative quadcopter sRPAS finite element model and incorporated it with THUMS ver 4.02 50^th percentile male and 5^th percentile small female models to simulate sRPAS to human head impacts. The simulations were validated with cadaver experiments. The common injury metrics such as head injury criteria (HIC) and brain injury criterion (BrIC) were correlated with head injury-related responses such as …

Developing Multi-Species Brain-Strain-Based Scaling Law Using Finite Element Analysis., Xingyu Liu

Electronic Thesis and Dissertation Repository

To better understand traumatic brain injury (TBI), various laboratory animal experiments have been developed. However, there lacks an effective scaling to connect animal TBI models with human brain injuries. With the help of the finite element (FE) model, brain mechanical responses such as strains can be predicted, and hence can serve as a parameter to facilitate animal to human scaling, as these tissue-level strains directly link to neuronal damage. In this thesis, first, a comprehensive comparison of brain strains between animal TBI models and human TBI cases was conducted. Then, a brain-strain-based scaling law between mouse and human was developed, …

Finite Element Analysis Of Impact And Cohesion Of Cold Sprayed Particles Onto Non-Planar Surfaces, Zhongkui Liu

Masters Theses

Compared to traditional thermal spray, cold spray as a new emerging surface treatment eliminates or substantially reduces phase transformation of deposited material and reduces coating porosity. Therefore, the appearance of this new type of surface treatment and additive manufacturing process has attracted considerable attention from researchers. In this research, three-dimensional modeling of Al6061-T6 particle impact and cohesion process was simulated by utilizing commercial finite element analysis (FEA) software ABAQUS/Explicit. To guarantee that a stable bonding phenomenon can be realized in the scope of physical validity, a built-in cohesive contact behavior model was implemented in the simulation to understand the bonding …

Biomechanical Analysis Of Commotio Cordis In Children's Baseball - A Computational Approach, Grant J. Dickey

Electronic Thesis and Dissertation Repository

Commotio cordis is the second leading cause of cardiac death in young athletes. This rare sudden-death mechanism most commonly affects young children playing baseball. It is caused by impacts to the chest during the repolarization phase of the cardiac cycle, which causes the heart to go into ventricular fibrillation, often leading to death. This study adopted the detailed and validated CHARM-10 child finite element model to replicate commotio cordis instances by simulating baseball impacts to the chest. New commotio cordis injury metrics were developed to create a more accurate prediction for chest protector effectiveness. The conventionally used injury metrics for …

Additively Manufactured Metallic Cellular Structures, Okanmisope Aziel Fashanu

Doctoral Dissertations

"Cellular structures are lightweight structures with excellent mechanical, thermal, and acoustic properties. They offer promise in a series of applications, including lightweight applications, sandwich cores, mechanical damping, acoustic absorption, strain isolation, and thermal management. The manufacturing of these complex cellular structures is expensive and time-consuming, which hinders the adoption of these structures in many industries. Advancement in manufacturing technologies, such as additive manufacturing (AM), however, have changed this. AM allows for the rapid and less expensive manufacturing of complex cellular structures. This work aimed to investigate the performance of additively manufactured cellular structures for lightweight and sandwich core applications. In …

Development Of Triangular And Tetrahedral Finite Elements For Solutions To Thermoelastic Instabilities Using Hotspotter, Cortney Samuel Leneave

Electronic Theses and Dissertations

The objective of the work presented in this thesis is to develop first-order triangular and tetrahedral elements for solutions to Thermoelastic Instabilities (TEI) regarding sliding friction systems in Hotspotter.

Hotspotter software uses a finite element method and an eigenvalue method and is an important tool because currently no other commercial software exists which solves the TEI problem for critical velocities and wave numbers of a system. Hotspotter currently uses quadrilateral and hexahedral elements for two and three dimensional analysis, respectively. Typically, tri and tet elements are used in industry when doing static and dynamic stress analysis. Therefore, the Hotspotter user …

Experiments And Modeling Of The Chemo-Mechanically Coupled Behavior Of Polymeric Gels, Nikola Bosnjak

Dissertations

Polymeric materials consist of mutually entangled or chemically crosslinked long njitmolecular chains which form a polymer network. Due to their molecular structure, the njitpolymeric materials are known to undergo large deformation in response to various njitenvironmental stimuli, such as temperature, chemical potential and light.

When a polymer network is exposed to a suitable chemical solvent, the solvent molecules are able to diffuse inside the network, causing it to undergo a large volumetric deformation, known as swelling. In addition to volumetric deformation, this process involves the chemical mixing of the polymer network and solvent molecules, and is typically environmentally responsive. A …

Blast Shock-Wave Characterization In Experimental Shock Tubes, Sudeepto Kahali

Dissertations

Blast-induced traumatic brain injuries have affected U.S. soldiers deployed for extended periods in the gulf and Afghanistan wars. To identify the biomechanical and biochemical mechanisms of injury, critical in the identification of diagnostic and therapeutic tools, compressed gas-driven shock tubes are used by investigators to study shockwave-animal specimen interactions and its biological consequences. However, shock tubes are designed and operated in a variety of geometry with a range of process parameters, and the quality of shock wave characteristics relevant to field conditions and therefore the study of blast-induced traumatic brain injuries suffered by soldiers is affected by those conditions. Lab-to-lab …

Parametric Study Of Residual Stresses In Wire And Arc Additive Manufactured Parts, Hisham Khaled Jamil Abusalma

Mechanical & Aerospace Engineering Theses & Dissertations

Wire and Arc Additive Manufacturing (WAAM) is a cost-effective additive manufacturing process due to its capability to fabricate large metal parts with high deposition rate and low equipment cost. Although this method is gaining popularity in manufacturing industry, more research is needed to understand process parameters’ effects on residual stress (RS) distribution and part distortion. As such, a 3D thermo-elastic-plastic transient model was established in ABAQUS and employed to investigate the effect of process parameters such as the torch speed, the deposition power and the interlayer dwell time on RS distribution and distortion in WAAM part. The numerical model utilized …

Finite Element Analysis Investigation Of Hybrid Thin-Ply Composites For Improved Performance Of Aerospace Structures, Alana M. Zahn

Mechanical & Aerospace Engineering Theses & Dissertations

Commercial and private aircraft have a need for strong yet light materials in order to have the most ideal performance possible. This study looks at the use of thin-ply composite materials to improve the performance of aircraft structures by means of weight savings and/or strength increase when compared to laminates that are composed of exclusively standard-ply materials. In order to perform an investigation based solely on finite element analysis, validation efforts were performed using test data from open hole tension, open hole compression, notched tension, and notched compression specimens. Once the models were validated sufficiently, the same modeling practices were …

Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters In Resonance And Off-Resonance Modes, Mohamed A. Shabara

Mechanical & Aerospace Engineering Theses & Dissertations

Energy harvesting technologies are integrated into various modern devices and systems. These systems include Artificial Intelligence (AI) systems, Internet of Things (IoT), various types of energy harvesters are integrated in many engineering applications such as automotive, aerospace and ocean engineering. In order to develop a fully functioning stand-alone system, it is essential to integrate it with a built in power source such as a battery or a power generator. Also, in many situations, city power sources might not be available. Therefore, reliable, renewable and sustainable local power generators are desired. Piezoelectric energy harvesting (PEH) technologies, which are piezoelectric material-based devices, …

A Computational Investigation Into Acromial Fractures After Reverse Total Shoulder Arthroplasty, Jason Lockhart

Electronic Thesis and Dissertation Repository

Acromial fractures are a debilitating complication following reverse total shoulder arthroplasty (RTSA). The purpose of this work is to (1) improve the current state of FE bone stress estimates after RTSA and to investigate the effects of (2) plane of elevation, (3) hand loads, and (4) baseplate screw position on scapular spine stress. The FE method used was validated against an in-vitro strain gauge based experiment and found to be accurate in the prediction of stress increases and decreases after RTSA. The coronal plane of elevation was found to increase scapular spine stress compared to more central planes of elevation. …

Influence Of Dynamic Multiaxial Transverse Loading On Ultrahigh Molecular Weight Polyethylene Single Fiber Failure, Frank David Thomas

Theses and Dissertations

High performance fibers such as ultrahigh molecular weight polyethylene (UHMWPE) are often used for ballistic impact applications in the form of textile fabrics and composite laminates. In order to predict the ballistic performance of such materials, single-fiber experiments are performed to quantify the material behavior at smaller length scales, which can be applied to larger length scales as a result. Failure of UHMWPE is well understood as a function of simple tension at low and high strain rates, as well as under various multiaxial loading states. However, experimental characterization of single UHMWPE fibers under transverse loading at high strain rates …

Compaction And Residual Stress Modeling In Composite Manufactured With Automated Fiber Placement, Von Clyde Jamora

Mechanical & Aerospace Engineering Theses & Dissertations

Automated fiber placement is a state-of-the-art manufacturing process that allows for complex layup patterns and can quickly place, cut, and restart composite tows. However, with this type of manufacturing process layup defects are inevitable, and manufacturing defects propagate after curing. Process modeling is the considered approach for exploring the defect prediction. Two different but related works were conducted, which are the thermochemical and hyperelastic model and the residual deformation model. For the model before cooling, a hyperelastic model and a thermo-chemical were made to simulate the compaction and heat transfer. Temperature dependent properties that are a function of degree of …

Application And Evaluation Of Full-Field Surrogate Models In Engineering Design Space Exploration, Christopher Murray Thelin

Theses and Dissertations

When designing an engineering part, better decisions are made by exploring the entire space of design variations. This design space exploration (DSE) may be accomplished manually or via optimization. In engineering, evaluating a design during DSE often consists of running expensive simulations, such as finite element analysis (FEA) in order to understand the structural response to design changes. The computational cost of these simulations can make thorough DSE infeasible, and only a relatively small subset of the designs are explored. Surrogate models have been used to make cheap predictions of certain simulation results. Commonly, these models only predict single values …

Analysis And Control Of Fiber-Reinforced Elastomeric Enclosures (Frees), Soheil Habibian

Master’s Theses

While rigid robots are extensively used in various applications, they are limited in the tasks they can perform and can be unsafe in close human-robot interactions. Soft robots on the other hand surpass the capabilities of rigid robots in several ways, such as compatibility with the work environments, degrees of freedom, manufacturing costs, and safe interactions with the environment. This thesis studies the behavior of Fiber-Reinforced Elastomeric Enclosures (FREEs) as a particular type of soft pneumatic actuator that can be used in soft manipulators. A dynamic lumped-parameter model is created to simulate the motion of a single FREE under various …

Human Knee Fea Model For Transtibial Amputee Tibial Cartilage Pressure In Gait And Cycling, Gregory Lane

Master's Theses

Osteoarthritis (OA) is a debilitating disease affecting roughly 31 million Americans. The incidence of OA is significantly higher for persons who have suffered a transtibial amputation. Abnormal cartilage stress can cause higher OA risk, however it is unknown if there is a connection between exercise type and cartilage stress. To help answer this, a tibiofemoral FEA model was created. Utilizing linear elastic isotropic materials and non-linear springs, the model was validated to experimental cadaveric data. In a previous study, 6 control and 6 amputee subjects underwent gait and cycling experiments. The resultant knee loads were analyzed to find the maximum …

A Scientific Approach To Understanding The Head Trauma Endured By A Mixed Martial Arts Fighter, John William Michael Sorbello

Mechanical & Aerospace Engineering Theses & Dissertations

The purpose of this research is to gain some insight on the type of head trauma an athlete may encounter during mixed martial arts (MMA) competition. These athletes endure continuous blows to the head throughout their training and fighting career. The knowledge obtained from this research may assist MMA athletes and trainers in assessing the way they train, how they compete and, more importantly, how long they choose to compete in their amateur or professional MMA career.

The analysis is performed by first creating a three-dimensional solid model of the human head based on geometric coordinates originally obtained from a …

Characterizing Anisotropy In Fibrous Soft Materials By Mr Elastography Of Slow And Fast Shear Waves, John Larson Schmidt

McKelvey School of Engineering Theses & Dissertations

The general objective of this work was to develop experimental methods based on magnetic resonance elastography (MRE) to characterize fibrous soft materials. Mathematical models of tissue biomechanics capable of predicting injury, such as traumatic brain injury (TBI), are of great interest and potential. However, the accuracy of predictions from such models depends on accuracy of the underlying material parameters. This dissertation describes work toward three aims. First, experimental methods were designed to characterize fibrous materials based on a transversely isotropic material model. Second, these methods are applied to characterize the anisotropic properties of white matter brain tissue ex vivo. Third, …