Mechanical Engineering Commons^™

Compression Tester Shop Press, Colby Johnson, Brett Russon, Taylor Vandenhoek

Mechanical Engineering

A piece of machinery designed to carry out compression and bending tests on building materials constructed by the Center for Vocational Building Technologies (CVBT) in Isarn, Thailand.

Multi-Axis Tripod Locking Mechanism, Glenn Carros, Hannah Gause, Matthew Theiss

Mechanical Engineering

No abstract provided.

Cold Roll Extrusion Machine Redesign Final Design Report, Foja Bains, Bryan Cyr, David Van Schooten

Mechanical Engineering

This report is a comprehensive review of a redesign of subsystems for a Cold Roll Extrusion Machine, a forging operation, for PCC Rollmet. Three subsystems were addressed in this project: A new Loading system, Feed system, and Lubrication system. The Loading system, and support system during developmental design stages, addressed the timely loading process of pipes onto the forging machine. After two quarters of design iteration, the group decided on a lever arm, hydraulic actuated, loading design. In the final quarter of the project, a quarter scale model of this lever arm was constructed to prove the concept of the …

Aeroponic/Hydroponic Growth Module, Sean Marrs, Joshua Moreno

Mechanical Engineering

No abstract provided.

Mhttu Implementation Final Project Report, Angelica Ramirez, Julian Samayoa, Matt Keeble

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort in developing fireproof high-efficiency particulate air (HEPA) filters. Due to the nature of LLNL’s research, the air leaving its lab facilities must be filtered before it is released into the atmosphere; thus, each laboratory is equipped with large banks of HEPA filters through which all internal air is exhausted. Over the years, however, fires have erupted in the labs and entire banks of HEPA filters have been destroyed, resulting in repairs and crucial downtime that prove costly.

Engineers and scientists alike have been seeking a permanent solution to this problem, and one …

Cal Poly India Project, Derek Babine, Austen Hibler, Alex Hernandez

Mechanical Engineering

This report documents the research, ideation, and development of a solution, implemented by the Cal Poly India Sanitation Team per the request of Mr. Harish Bhutani, to solve the problem of hazardous human waste management in poor villages in India. The sponsor envisioned a universal design that would give each household in those villages access to a private toilet system because the current solution is open defecation in water sources and farming fields. The initial constraints required the project be low cost, not use of electricity or water, have the ability to cater to an 8-10 person household, and be …

Machine Shop Learning Kits, Samantha Kelley, Ellen Chambers

Mechanical Engineering

Currently in the Cal Poly Machine shops, students are struggling to find ways to fulfill the 10 hours of shop experience required to gain their Yellow Tag certification. Red Tag is the first level of certification students generally achieve their freshman year. It allows them to use basic machine tools such as drills, shears, benders, etc. Then after completing 10 hours of shop experience they can take the Yellow Tag test, which gains them access to use a welder, mill, and lathe. The heads of the machine shop, the shop technicians, and the mechanical engineering students will all have different …

Semi-Automated Glass Mat Splice Operation For Asphalt Shingle Line, Justin Bracci, Harry Zhao, Chad Linafelter

Mechanical Engineering

The following report details the senior project sponsored by GAF Materials Corporation, Shafter, CA in regards to semi-automating a glass-mat splicing table for asphalt roofing shingle production. Herein includes details, research, design, and analysis regarding the semi-automation of the gluing processes for the splicing table. A working prototype was manufactured and tested for the future implementation onto GAF’s production line or further senior project involvement.

Farmbot, James Cruz, Scott Herrington, Bryan Rodriguez

Mechanical Engineering

The purpose of this project was to develop the hardware for the current Farmbot to perform its primary functions, and to create a template for a system that would be adaptable for future users and developers. The scope of the project included creating a universal tool mount, a seeding system, and a watering and nutrient mixing system. This project was brought to the students by sponsor Rory Aronson, the creator of Farmbot. The Cal Poly Farmbot team was able to go through an extensive brainstorming and iterative process for each part, where testing was able to be incorporated immediately due …

Temperature Controlled Packaging Container For Biologics And Pharmaceuticals, Melinda Phan, Yufay Chow-Yee, Abraham Ho

Mechanical Engineering

Clinical Supplies Management, Inc. (CSM) provides clinical trial services to biotechnology and pharmaceutical companies by shipping pharmaceuticals to clinics and other patients. In winter 2014, CSM presented a temperature control packaging project to the Cal Poly Senior Project class. As a result, three Cal Poly Mechanical Engineering Students were tasked to design, manufacture, and qualify a shipping container that would maintain ten 10 mL vials between 2-8°C for 96 hours. The final product would have to cost less to ship than the Credo Cube, CSM’s current temperature control packaging product. After considerable research and analysis on possible temperature control technologies, …

Wingtip Dynamics Simulator, Eugene Fox, Nick Rodriguez, Steven Rieber

Mechanical Engineering

Raytheon is a defense contracting company with an electronic warfare division that is developing a radio frequency signal triangulation system. Part of the focus in improving this technology is the need for accurate and real time locational knowledge of the signal receivers, which are located at the tips of aircraft wings. Due to turbulence during flight, the fluttering motion of the wings alter the distance and angle relationships of the two receivers and add noise to the received signal data, which negatively affect the triangulation estimates. To mitigate this error caused by the wing flutter, Raytheon is developing a software …

Electric Porsche Drivetrain Re-Design, Taylor Carlson, Quinton Petty, Spencer Treffry

Mechanical Engineering

The objective of this project was to redesign the drivetrain of the electric 1977 Porsche 911 Targa S with the goal of optimizing the drivetrain for motor efficiency and performance. The focus was to redesign the interface between the electric motor and rear wheels to maximize the efficiency of power transmission from the motor to the ground.

Two systems were proposed, a fixed gear reduction and two motors with an electronic differential. The fixed gear reduction was chosen to be designed and built by replacing the stock Porsche transmission with a differential featuring a favorable gear ratio for the electric …

The Icon Horn Loudspeaker, Vincent Phan

Mechanical Engineering

A horn loudspeaker in layperson terms is essentially taking a megaphone and integrating it into a standard speaker. Similar to a cheerleader yelling into a megaphone, the horn loudspeaker will amplify the sound from the speaker with no additional power needed. Using standard speaker horn theory, the geometry of the “megaphone” can be engineered to tune the acoustic performance tailored to loudness and/or specific acoustics frequencies. The horn contours are similar to traditional orchestra instruments such as the French horn, trumpet, and tuba. The iconic beauty of a horn married with the quantitative engineering theory creates an aesthetic yet functional …

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

An Assessment Of Acoustic Contrast Between Long And Short Vowels Using Convex Hulls, Erin F. Haynes, Michael Taylor

Mechanical Engineering

An alternative to the spectral overlap assessment metric (SOAM), first introduced by Wassink [(2006). J. Acoust. Soc. Am. 119(4), 2334–2350], is introduced. The SOAM quantifies the intra- and inter-language differences between long–short vowel pairs through a comparison of spectral (F1, F2) and temporal properties modeled with best fit ellipses (F1 × F2 space) and ellipsoids (F1 × F2 × duration). However, the SOAM ellipses and ellipsoids rely on a Gaussian distribution of vowel data and a dense dataset, neither of which can be assumed in endangered languages or languages with limited available data. The method presented in this paper, called …

Adaptive Basketball Shooter - Final Project Report, Jenna N. Becker, Richard A. Galanti, Justin D. Haley, Brett Y. Nayudu

Mechanical Engineering

The Friday Club is a joint venture between the Cal Poly Kinesiology Department and the San Luis Obispo Special Olympics that offers people with varying degrees of disability the opportunity to meet weekly and learn various sports and games. At Friday Club, athletes in wheelchairs with limited arm strength use devices built by Cal Poly mechanical engineering students in order to participate in various sports. Many devices are designed to attach to the Universal Play Frame (UPF), a wheel-chair attachment. The purpose of this project was to design and build a UPF device that will launch a basketball, so that …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Blds Articulated Mounting Feet, Mitchell D. Conn, Chris Mazzucco

Mechanical Engineering

This final report summarizes all of the efforts of the Senior Project aimed at creating Articulating Mounting Feet for the BLDS. The project focuses on improving the design of the mounting feet for the current Boundary Layer Data System at Cal Poly, San Luis Obispo. Dr. Russ Westphal, the project’s sponsor, wishes that our team focus primarily on a reliable and lightweight mount design for a curved wing, with only transverse curvature. Dr. Westphal is currently researching the boundary layer effects on airplane wings at Cal Poly, and the ability to mount to a multitude of surface contours would increase …

Rotating Test Apparatus, Brian David Yale, David George Shelton

Mechanical Engineering

No abstract provided.

Freehub Test Machine, Brett Murphy, Mitch Ambrosini, Nick Boldt, Stephen Knaus

Mechanical Engineering

The purpose of this project is to design and build a machine to test a bicycle freehub in a lab environment. The conditions need to imitate the forces experienced by a bike wheel in a repeatable fashion. To do this we designed a machine that can fatigue the freehub in two distinct modes, pedaling and freewheeling. In the pedaling mode the freehub will be repeatable torqued to find how many engagement cycles freehub can endure before failure. The freewheeling test will spin the freehub in its coasting direction to find how the freehub wears during its lifetime. A freehub is …

Adaptive Adjustable Tricycle, Jasper E. Bolton, Kemely A. Chow, Ryan D. Hirahara, Heather K. Instasi

Mechanical Engineering

As a part of the Cal Poly Mechanical Engineering curriculum, all students must take part in a three quarter long senior design project. Students are presented with existing problems, select a project, and then apply the knowledge they have gained throughout their academic career to design and build a solution. The intent behind this project is to create an experience that is similar to an engineering project in industry, by applying engineering and teamwork skills to solve a problem.

Team Trikeceratops’ mission was to develop an adaptive adjustable tricycle to be used in the Special Education Department of the Buena …

Automated Foosball Table, Jim R. Stefani, Alex J. Herpy, Brett Gordon Jaeger, Kevin S. Haydon, Derek Alan Hamel

Mechanical Engineering

This project is the second iteration of an automated foosball table for Yaskawa America as a trade show display. The table is meant to provide an interactive experience which highlights the speed and precision of the Yaskawa hardware. The first iteration of the project was mainly focused on creating the physical hardware for the system and to begin the basic programming for the system. This phase of the project was focused on finalizing the physical hardware of the system, implementing the vision system and to continue the basic programing of the system AI. A third team will be assigned to …

Final Design Report Bull Outdoor Products Tailgating/Backyard Barbecue, Kyle Van Allen, David Mei, Nicholas James Marquez

Mechanical Engineering

Bull Outdoor Products, Inc. is a specialty company whose main products are high end barbecues for use in outdoor kitchens. They desire a more portable barbecue stand(s) that can be used for tailgating. This is to be achieved by creating a dual-purpose stand/frame that allows for the barbecue head to be used on a trailer hitch or as rolling stand that can be used without a trailer hitch.

Peek Wear Test System, Michael Brown, Mason Chellemi, Allian Roman

Mechanical Engineering

The wear characteristics of PEEK carbon fiber composites are not well understood in comparison to high strength materials in common use such as steel, aluminum, and carbon fiber epoxy. This lack of understanding limits the applications in which the superior strength to weight ratio and stiffness of PEEK carbon fiber composites may be utilized with confidence to situations in which there are no significant bearing surface interactions between nearby components. The objective of this project was to design, build, and test a machine that is capable of evaluating the behavior of PEEK carbon fiber composites in a long term, high …

Team Joseph: Adaptive Aquatic Device, Paul Sands, Lilly Hoff, Andrea Voigt

Mechanical Engineering

The scope of this project included designing and fabricating an adaptive aquatic device for Joseph, a 20 year old student in the Special Education Program at San Luis Obispo High School with a subset of cerebral palsy known as spastic quadriplegia. The project was presented at the beginning of the Fall 2013 quarter to the mechanical engineering students at Cal Poly with the aspiration that a team of engineers would construct a device that would allow Joseph, his friends and family to compete in their first triathlon on July 27, 2014. The project was humbly accepted by mechanical engineering students …

Adapted Pool Cue, Cole Clark, Daniel Patterson, Michelle Cheung, Dylan Sauer

Mechanical Engineering

Our primary goal was to develop an adaptive device to allow a user with limited upper body mobility to more effectively play a game of pool. Within this goal it was important to design around the concept of a least restrictive environment, in order to provide the user with as close to a standard pool playing experience as possible. The device was designed to specifically meet the needs of John Lee, an Assistive Technology Specialist at Cal Poly's Disability Resource Center. Mr. Lee has muscular dystrophy, which limits his upper and lower body mobility and currently requires his use of …

Adaptive Kayak Seating: The Tide Rider 360, Irvin Camacho, Grant Petersen, Audrey Riddle, Andrea Voigt

Mechanical Engineering

The Adaptive Paddling Program at California Polytechnic State University has sponsored the construction of an adaptive kayak seat, the Tide Rider 360, to provide paddlers with disabilities sufficient trunk support while out on the water. In particular, this design focused on providing the least restrictive environment for all users while still providing sufficient lateral, neck, back, and hip support. This seat is intended for use in the quarterly Adaptive Paddling Program to allow people with disabilities to experience the joys of kayaking in the most comfortable and supportive environment possible.

The following report details the background research, design development, manufacturing, …

Science Of Water Table, Tim Haigh, Kris Francis, Nick Schlemmer

Mechanical Engineering

No abstract provided.

Mini-High Temperature Hepa Filter Test Unit, Mario Trinchero, Juan Miguel Nagengast, Andrew Wood

Mechanical Engineering

There is a need for better HEPA filter materials, especially those able to withstand higher temperatures as experienced in fire conditions. In order to test these materials our team built a Mini High Temperature Testing Unit (MHTTU) that can rapidly, efficiently, and inexpensively test a large number of new and innovative materials for HEPA filter components. MHTTU test results will be used to down select the most promising materials for HEPA filter components (e.g., media, sealants, gaskets) for full scale testing in the HTTU. There are already some pieces of equipment that exist in other parts of the country that …

Mobile Solar Pv Trainer, Matthew Myers, Matthew Clause, Lawrence Smith

Mechanical Engineering

The aim of the Mobile Solar PV Trainer Project was to design, construct and test a versatile and robust laboratory training rig for the Cal Poly Electrical Engineering department. This project was inspired by the desire of one or more California Polytechnic State University electrical engineering professors to add laboratory components to two established upper division electrical engineering courses in photovoltaic panels and solar power. This report contains a detailed description of the trainer’s desired specifications, our ideation process, a thorough description of the selected trainer design including part drawings, assembly documentation and a bill of materials as well as …