Mechanical Engineering Commons^™

Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites, Sergio Dante Favela

Open Access Theses & Dissertations

This research will be divided into two sections. The first section discusses direct ink writing and thermomechanical characterization for thermoset composites. The thermoset ink is prepared with fillers aiding the printing process by modifying the rheology of the ink and geometry retention by allowing for the part to have an initial UV cure step. Three specimen formulations with different weight percentages were printed by material extrusion in the shape of tensile specimens following ASTM standard D638 to characterize the mechanical properties at room temperature, 100â?? and 200â??. Furthermore, the ink resin was characterized through DSC, TGA, and rheology testing. The …

The Qualification Of Sealability And Creep Relaxation Of Additively Manufactured Zytel Gaskets For Pem Fuel Cells, Robert Lazarin

Open Access Theses & Dissertations

The purpose of this thesis is to study the feasibility of low-cost additive manufacturing of gaskets for proton exchange membrane fuel cells exposed to extreme temperature conditions ranging from -55°C to 100°C. With the growing popularity and decreasing costs of additive manufacturing technologies, specifically Material Extrusion (ME), research is being conducted to determine the feasibility of ME components. Thermally cycled PEMFCs may exhibit accelerated gasket deterioration, therefore, the mechanical stability of material extruded gaskets following a harsh thermal cycle must be assessed. The feasibility of the material extruded gaskets will be proven by manufacturing optimization and mechanical testing. The target …

Synthetic Data Generation For Intelligent Inspection Of Structural Environments, Noshin Habib

Open Access Theses & Dissertations

Automated detection of cracks and corrosion in pavements and industrial settings is essential to a cost-effective approach to maintenance. Deep learning has paved the path for vast levels of improvement in the area. Such models require a plethora of data with accurate ground truth and enough variation for the model to generalize to the data, which is notwidely available. There has been recent progress in computer graphics being used for the creation of synthetic data to address the issue of deficient data availability, but it is limited to specific objects, such as cars and human beings. Textures and deformities within …

Fabrication And Characterization Of Iron-Based Catalysts For The Dehydrogenation Of Fossil Fuels, Victoria Isabel Reyes

Open Access Theses & Dissertations

For a prosperous and sustainable future, hydrogen is an encouraging solution due to its simple transition for industrial decarbonization and synergy for economic development. Paradoxically, current hydrogen production pathways release substantial amount of greenhouse gases into the atmosphere contributing to climate change. To keep up with increasing demand, hydrogen could be produced through microwave-assisted thermocatalytic dehydrogenation of fossil fuels without emitting carbon dioxide. This requires specified catalysts to meet the requirements of hydrogen yield and selectivity. The objective of the present research is to fabricate, characterize, and compare iron-based alumina (FeAl_x O_y) catalysts produced via solution combustion synthesis and iron-based …

Characterization Of A Flex-Fuel Oxy-Combustion System Through Experimental Investigation And Computational Modeling, Md Mohieminul I. Khan

Open Access Theses & Dissertations

Oxy-fuel combustion has the potential to offer high thermal efficiency and lower pollutants emission compared to other existing combustion technologies. More than 63% of the worldâ??s electricity is produced by fossil fuel combustion which also is the major reason for greenhouse gas emissions. Oxy combustion offers a solution to it. Oxy combustion uses pure oxygen as an oxidizer instead of air which eliminates the NOx and SOx products from the exhaust. In oxy-combustion flue gas mainly consists of CO2 and water vapor. Furthermore, combustion in presence of pure oxygen results in higher flame temperature and hence promises higher thermal efficiency. …

Suitability Of Low-Cost Additive Manufacturing For Polymer Electrolyte Fuel Cells, David Alexander

Open Access Theses & Dissertations

The purpose of this dissertation is to study the feasibility of low-cost additive manufacturing to fabricate polymer electrolyte fuel cell bipolar plate materials. Traditional manufacturing techniques include molding, milling, hollow embossing, hydro-forming, rolling, and electromagnetic forming. These processes are employed when a design has been selected due to higher costs at low volumes. The combination of high initial costs and bipolar plates being the most expensive component of the polymer electrolyte fuel cell creates incentive to mitigate this obstacle. The feasibility of low-cost additive manufactured bipolar plates will be proven by fabrication, post-processing, and characterization of printed test specimen. The …

A Central Compact Hybrid-Variable Method With Spectral-Like Resolution, Md Mahmudul Hasan

Open Access Theses & Dissertations

Numerical methods for hyperbolic conservation laws have been a driving force for theresearch in scientific computing and simulation science in the past decades, as many physical, biological, and engineering systems are governed by these equations, such as fluid mechanics, tumor growth, and virtual wind tunnel simulations. Despite the existence of many schemes in the literature, people have never stopped searching for more accurate and efficient methods for these problems. Indeed, the increasing complexity of systems in emerging applications demands better resolution of sub-grid scale phenomenon whereas classical methods usually fail to deliver high-fidelity simulation results of such systems within realistic …

Material Synthesis And Machine Learning For Additive Manufacturing, Jaime Eduardo Regis

Open Access Theses & Dissertations

The goal of this research was to address three key challenges in additive manufacturing (AM), the need for feedstock material, minimal end-use fabrication from lack of functionality in commercially available materials, and the need for qualification and property prediction in printed structures. The near ultraviolet-light assisted green reduction of graphene oxide through L-ascorbic acid was studied with to address the issue of low part strength in additively manufactured parts by providing a functional filler that can strengthen the polymer matrix. The synthesis of self-healing epoxy vitrimers was done to adapt high strength materials with recyclable properties for compatibility with AM …

Supercritical Co2 Recompression Closed Brayton Cycle Analysis, Andres Eduardo Gutierrez Hernandez

Open Access Theses & Dissertations

On this research, the results of an analysis made of a Supercritical Carbon Dioxide (sCO2) Recuperated Closed Brayton Cycle (RCBC) done by performing theorical calculations and comparing it to the results obtained with the use of the software ASPEN Plus will be presented. To demonstrate and determine that this software is a useful tool for modeling the proposed type of cycle, a preliminary comparison was made to verify with previous studies found in literature. A comparison and analysis between the possible working fluids and thermal energy sources was also performed to emphasize the decision of using CO2 as the cycle …

Synthesis And Characterization Of Functiona Materials For 3d Printed Composites, Elizabeth Irene Reza

Open Access Theses & Dissertations

The following body of work encompasses the synThesis, upscaling, additive manufacturing, and characterization of microspheres as functional fillers incorporated into polymer syntactic foams. Synthesizing microspheres permits control over morphology, dispersion of particles, and size while the use of direct write manufacturing allowed for the controllability of filler orientation. Two different syntactic foams were developed from similar methodologies: (1) a silicone syntactic foam (2) epoxy syntactic foam. The silicone epoxy foam showed an increasing in damping and elastic modulus. The epoxy syntactic foams showed an enhanced thermal and electrical properties.

The Effect Of K2co3 Concentration In Kerosene Emulsions On Spray Droplet Sizes For A Magnetohydrodynamic Power Generator, Alejandra Castellano

Open Access Theses & Dissertations

Potassium carbonate (K2CO3) is an effective seeding material to introduce potassium vapor in oxy-fuel combustion to create a conductive plasma. Injecting potassium carbonate before combustion promotes particle volatilization and improves the generation of potassium vapor. This can be achieved by emulsifying a potassium carbonate solution with kerosene. Several studies have investigated creating stable emulsions with kerosene with water by using differing surfactants. However, the effects of using varying concentrations of K2CO3 dissolved in deionized water have not been fully explored. Based on methods of creating successful emulsions, the development of a successful mixture comprised of kerosene and K2CO3 solution is …

Machine Learning Analysis To Characterize Phase Variations In Laser Propagation Through Deep Turbulence, Luis Fernando Rodriguez Sanchez

Open Access Theses & Dissertations

The present Dissertation is focused on the analysis of the atmospheric conditions of a turbulent environmental system and its effects on the diffraction of a laser beam that moves through it. The study is based on the optical communication of two labs placed at the summit of two mountains located in Maui, Hawaii. The emitter system is located at the Mauna Loa mountain and the receiver at the Haleakala. The distance between both mountains is 150 km. The emitter system is at a height of 3.1 km and the receiver at 3.4 km. The maritime environment at the location experiences …

Brian Valdez - Dynamics And Control Of A 3-Dof Manipulator With Deep Learning Feedback, Brian Orlando Valdez

Open Access Theses & Dissertations

With the ever-increasing demands in the space domain and accessibility to low-cost small satellite platforms for educational and scientific projects, efforts are being made in various technology capacities including robotics and artificial intelligence in microgravity. The MIRO Center for Space Exploration and Technology Research (cSETR) prepares the development of their second nanosatellite to launch to space and it is with that opportunity that a 3-DOF robotic arm is in development to be one of the payloads in the nanosatellite. Analyses, hardware implementation, and testing demonstrate a potential positive outcome from including the payload in the nanosatellite and a deep learning …

Cmas/Volcanic Ash Infiltration Performance Of Yttria Rich-Zirconia Thermal Barrier Coatings Produced By Electron Beam Physical Vapor Deposition, Juan Jose Gomez Chavez

Open Access Theses & Dissertations

For many years the use of thermal barrier coatings (TBC) in gas turbine engines has allowed a significant increase in engine operating temperatures which are above the Ni-based super alloys' melting point. The base material for TBCs is the state of the art 7 wt % yttria stabilized zirconia (YSZ) which provides the thermal protection. Current industry demands for increased engine efficiency has pushed TBCs to the limits where significant technological constrains have been identified. One of the main ones represents the high temperature corrosion of the TBC material due to the ingestion of silicate based airborne particles commonly referred …

Experimental Laser Powder Bed Fusion System For Difficult To Process Metallic Materials, Syed Zia Uddin

Open Access Theses & Dissertations

The focus of this research was twofold, such as development of defect free fabrication parameters for laser powder bed fusion (LPBF) processing of crack prone or difficult to process metallic materials, and study of the temperature dependence of emissivity for some commonly used metal alloy powders in LPBF process. The later objective extends to the implementation of multiwavelength (MW) pyrometer technology for in situ true surface temperature measurement in LPBF process. LPBF is an additive manufacturing (AM) process capable of layer-by-layer manufacturing by successive laser melting of each layer according to CAD data. AM manufacturing has the inherent advantages of …

Data-Driven Predictive Framework For Modeling Complex Multi-Physics Engineering Applications, Arturo Schiaffino Bustamante

Open Access Theses & Dissertations

Computational models are often encountered in multiple engineering application, such as structural design, material science, heat transfer and fluid dynamics. These simulations offer the engineers the capability of understanding complex physical situations before putting them to practice, either through experimentation or prototyping. The current advances in computational sciences, hardware architecture, software development and big data technology, have allowed the construction of sturdy predicting frameworks for analyzing a wide array of natural phenomena across different disciplines, either through the implementation of statistical methods, such as big data, and uncertainty quantification, or through high performance computing of a numerical model. The objective …

Creating Multi-Functional G-Code For Multi-Process Additive Manufacturing, Efrain Aguilera Jr

Open Access Theses & Dissertations

Additive manufacturing (AM) started over thirty years ago and with it a manufacturing revolution that moves industrial production into the personal home. With recent interest shifting into multi-functional parts fabricated through AM technologies, unified systems are being developed. Merging different manufacturing technologies into one single machine is a challenge but undergoing research has shown promise in the development of multi-functional systems. Concurrent work is being done in the software, automation, and hardware aspect of multi-functional systems. An effort to use industry compatible Computer Aided Design (CAD) software to design multi-functional parts including circuits, micro-machining, and foil embedding then exporting and …

Computational Modeling Of A 60kw Oxy-Methane Direct Power Extraction Combustor, Omar Daniel Vidana

Open Access Theses & Dissertations

ANSYS Fluent was used to optimize components of a direct power extraction combustor. This includes the fuel injector, nozzle, and cooling units. Changes in the injector's inlet location impacted pressure and velocity distribution. An angle of 115 degrees with respect to the x-axis was found to increase distribution efficiency. Temperature and velocity data from the combustor and nozzle were calculated using NASA CEA and Fluent. Magnitudes of temperature and velocity for CEA and Fluent matched within 9% and 4%, respectively. For the cooling system it is expected that cavitation will not occur since the saturation temperature of water is not …

Modeling Of Piezoelectric Traveling Wave Rotary Ultrasonic Motors With The Finite Volume Method, Ivan Arturo Renteria Marquez

Open Access Theses & Dissertations

In 1983 Toshiiku Sashida developed a new motor concept called Piezoelectric Traveling Wave Rotary Ultrasonic Motor (PTRUSM). The advantages of these motors include high torque at low speed, absence of a generated magnetic field, and high potential for miniaturization. Unfortunately PTRUSMs have some disadvantages that limit the areas of applications for these types of motors. The disadvantages are a short operating life (about 1000 hours), small output power, and the need of a complex motor controller.

On one hand, these motors have been used in satellites, mobile phones, photocopiers, robotic arms, telescopes, automobiles, and camera autofocusing. On the other hand, …

Reaction Of Liquid Aluminium- Samarium Alloys With B4c At Ultra High Temperatures, Sanjay Shantha-Kumar

Open Access Theses & Dissertations

Reactive studies between a packed bed of B4C and Al-Sm-Me (Me = Ti, Zr, Hf) alloy melts were carried out under a pseudo-isopiestic thermodynamic system. A graphite enclosure isolated the system under a temperature gradient with one end reaching temperatures greater than 1800 K and the opposite end of the graphite enclosure contains liquid Al with temperatures approximating 950 K. The liquid Al establishes an oxygen potential to control oxidation of very reactive elements (i.e., Al, Sm and Ti). The Al-Sm-Me alloy infuses into a packed bed of B4C reacting exothermically to form borides and carbides depending on the thermodynamic …

A Heterogeneous Multiscale Method For Poroelasticity, Paul M. Delgado

Open Access Theses & Dissertations

In this Thesis, we develop and analyze a heterogeneous multiscale model for coupled fluid flow and solid deformation in porous media based on operator splitting and finite volume method. The splitting method results in two elliptic multiscale PDE's in the form of a reaction diffusion equation and a linear elasticity equation. We extend our previous multiscale method from 1D to higher dimensions and develop new approaches for the inclusion of mixed boundary conditions and source terms. We derive an error estimate for our multiscale method and analyze the stability of our splitting method. We also test the effectiveness of our …

Novel Classification Of Slow Movement Objects In Urban Traffic Environments Using Wideband Pulse Doppler Radar, Berta Rodriguez Hervas

Open Access Theses & Dissertations

Every year thousands of people are involved in traffic accidents, some of which are fatal. An important percentage of these fatalities are caused by human error, which could be prevented by increasing the awareness of drivers and the autonomy of vehicles. Since driver assistance systems have the potential to positively impact tens of millions of people, the purpose of this research is to study the micro-Doppler characteristics of vulnerable urban traffic components, i.e. pedestrians and bicyclists, based on information obtained from radar backscatter, and to develop a classification technique that allows automatic target recognition with a vehicle integrated system. For …

Design And Evaluation Of A High Temperature/Pressure Supercritical Carbon Dioxide Direct Tubular Receiver For Concentrating Solar Power Applications, Jesus Daniel Ortega

Open Access Theses & Dissertations

This work focuses on the development of a solar power thermal receiver for a supercritical-carbon dioxide (sCO2), Brayton power-cycle to produce ~1 MWe. Closed-loop sCO2 Brayton cycles are being evaluated in combination with concentrating solar power to provide higher thermal-to-electric conversion efficiencies relative to conventional steam Rankine cycles. High temperatures (923 - 973 K) and pressures (20 - 25 MPa) are required in the solar receiver to achieve thermal efficiencies of ~50%, making concentrating solar power (CSP) technologies a competitive alternative to current power generation methods. In this study, the CSP receiver is required to achieve an outlet temperature of …

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

Pressure And Heat Flux Effects On The Heat Transfer Characteristics Of Liquid Methane, Chance Paul Garcia

Open Access Theses & Dissertations

The heat transfer effects on liquid methane are investigated with the use of a carbo-thermal rig at the Center for Space Exploration Technology Research (cSETR) located at the University of Texas at El Paso (UTEP). The cSETR carbo-thermal rig design approach is presented along with the design of a methane condensing mobile unit (MCMU) to supply the laboratory and rig with liquid methane. The proposed research will generate useful insight in to heat transfer coefficient behavior, non-dimensional correlations, different flow conditions, varied inlet conditions, and varied heat flux for a subscale test article applicable to a regenerative cooled rocket engine …

Investigation Of The Radiative Heat Release Factor Of Premixed Oxy-Syngas Flames, Martin De La Torre

Open Access Theses & Dissertations

A significant part of the United States is being powered by combustion devises relying on coal since it is abundant and is a high emitting source of electricity per unit energy, however; the burning of this fuel is responsible for a significant contribution for the pollutant emissions causing global warming. Because coal is one of the main sources of energy in the U.S. and around the globe, the scientific community has been investigating ways to meet current and future governmental emission requirements. It is now well established that radiating heat from the flame is a major contributor of the heat …

A Block Operator Splitting Method For Heterogeneous Multiscale Poroelasticity, Paul M. Delgado

Open Access Theses & Dissertations

Traditional models of poroelastic deformation in porous media assume relatively homogeneous material properties such that macroscopic constitutive relations lead to accurate results. Many realistic applications involve heterogeneous material properties whose oscillatory nature require multiscale methods to balance accuracy and efficiency in computation.

The current study develops a multiscale method for poroelastic deformation based on a fixed point iteration based operator splitting method and a heterogeneous multiscale method using finite volume and direct stiffness methods. To characterize the convergence

of the operator splitting method, we use a numerical root finding algorithm to determine a threshold surface in a non-dimensional parameter space …

Electrical Characterization Of Microcrystalline Lifepo4 For Application In Lithium Ion Batteries, Sukhdeep Amarjeet Labana

Open Access Theses & Dissertations

Electrical Characterization of Microcrystalline LiFePO4 for application in lithium ion batteries. Mainly, to study about the electrical properties of Lithium Iron Phosphate as a cathode material to increase its Electrical consumption.

High-Order Central Finite-Volume Schemes For Atmospheric Modeling, Kiran Kumar Katta

Open Access Theses & Dissertations

Atmospheric numerical modeling has been going through drastic changes over the past decade, mainly to utilize the massive computing capability of the petascale systems. This obliges the modelers to develop grid systems and numerical algorithms that facilitate exceptional level of scalability on these systems. The numerical algorithms that can address these challenges should have the local properties such as the high on-processor operation count and minimum parallel communication i.e., high parallel efficiency. They should also satisfy the following properties such as inherent local and global conservation, high-order accuracy, geometric flexibility, non-oscillatory advection and positivity preservation properties. The goal of this …

Investigation Of A Water Desalination Method Via A Humidification-Dehumidification Process Using Hvac Technology, Juan Antonio Cornejo

Open Access Theses & Dissertations

Potable water is becoming a scarce resource in many arid regions of the world. An experimental unit was designed and constructed to examine and characterize the production capabilities of a humidification-dehumidification (HDH) desalination process. An HDH cycle offers a viable, technologically light, alternative for producing fresh water from brackish water because the low relative humidity air is infused with water vapor through evaporation by means of conventional heating, ventilation and air conditioning (HVAC) components. The evaporation process effectively separates salts and suspended solids from the brackish feed-water. Desalinated water is subsequently recovered by extracting the water vapor from the moist …