Mechanical Engineering Commons^™

A Meshless Approach To Computational Pharmacokinetics, Anthony Matthew Khoury

Doctoral Dissertations and Master's Theses

The meshless method is an incredibly powerful technique for solving a variety of problems with unparalleled accuracy and efficiency. The pharmacokinetic problem of transdermal drug delivery (TDDD) is one such topic and is of significant complexity. The locally collocated meshless method (LCMM) is developed in solution to this topic. First, the meshless method is formulated to model this transport phenomenon and is then validated against an analytical solution of a pharmacokinetic problem set, to demonstrate this accuracy and efficiency. The analytical solution provides a locus by which convergence behavior are evaluated, demonstrating the super convergence of the locally collocated meshless …

An Economical Method For Securely Disintegrating Solid-State Drives Using Blenders, Brandon J. Hopkins Phd, Kevin A. Riggle

Journal of Digital Forensics, Security and Law

Pulverizing solid-state drives (SSDs) down to particles no larger than 2 mm is required by the United States National Security Agency (NSA) to ensure the highest level of data security, but commercial disintegrators that achieve this standard are large, heavy, costly, and often difficult to access globally. Here, we present a portable, inexpensive, and accessible method of pulverizing SSDs using a household blender and other readily available materials. We verify this approach by pulverizing SSDs with a variety of household blenders for fixed periods of time and sieve the resulting powder to ensure appropriate particle size. Among the 6 household …

Reverse Osmosis; Addressing Freshwater Shortage With Sustainable Desalination, Jessica Savage

Sustainability Conference

Water security is an imperative part of high-functioning societies. Currently, large populations of the globe live in water-impoverished or water-stressed areas. With climate change and growing global populations, projections show more people being impacted by issues of water shortage.

One solution to water security is the implementation of desalination, specifically with reverse osmosis systems. This presentation walks through the history, capabilities, future work, and explanations on how reverse osmosis systems work. With continued research on improving desalination, communities in both developed and developing nations around the world can work towards total water security.

Thermodynamic Model Of Co2 Deposition In Cold Climates, Sandra K. S. Boetcher, Ted Von Hippel, Matthew J. Traum

Publications

A thermodynamic model, borrowing ideas from psychrometric principles, of a cryogenic direct-air CO2-capture system utilizing a precooler is used to estimate the optimal CO2 removal fraction to minimize energy input per tonne of CO2. Energy costs to operate the system scale almost linearly with the temperature drop between the ingested air and the cryogenic desublimation temperature of CO2, driving siting to the coldest accessible locations. System performance in three Arctic/Antarctic regions where the proposed system can potentially be located is analyzed. Colder ambient temperatures provide colder system input air temperature yielding lower CO2 removal energy requirements. A case is also …

Thermal Removal Of Carbon Dioxide From The Atmosphere: Energy Requirements And Scaling Issues, Ted Von Hippel

Publications

I conduct a systems-level study of direct air capture of CO2 using techniques from thermal physics. This system relies on a combination of an efficient heat exchanger, radiative cooling, and refrigeration, all at industrial scale and operated in environments at low ambient temperatures. While technological developments will be required for such a system to operate efficiently, those developments rest on a long history of refrigeration expertise and technology, and they can be developed and tested at modest scale. I estimate that the energy required to remove CO2 via this approach is comparable to direct air capture by other techniques. The …

Experimental Investigation Of A New Spiral Wingtip, Naseeb Ahmed Siddiqui, Mohamed Aldeeb, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

Experiments on the relative merits and demerits of slotted wingtips mimicking a bird’s primary feathers have been performed. The real emargination length of feather tips, their flexibility and curved shapes during cruise are considered in the present study. The experiments were performed at a Reynolds number of 3.7 x 10⁵ on a symmetric flat plate half wing of aspect ratio 3. Lift, drag and pitching moments were measured using a six component aerodynamic balance. Four different shapes inspired by bird primary feathers have been analysed. The rigid curved tip performed the best increasing the L/D ratio by 20%. This …

Ab Initio Computation Of Radiative Properties Of Monatomic Hydrogen, Fanny Thomas

Doctoral Dissertations and Master's Theses

With renewed interest in planetary atmospheric entry, descent, and landing, NASA has noted a need for improved physics modeling in computational fluid dynamics. Uncertainty in experimental data used in radiation heat transfer computations leads to “over-engineering” of entry body heat shields, at large weight and cost penalties. There is interest in developing hypersonic thermophysics models from the known “first principles” of physics.

A method for computing high temperature gas emissivity and absorptivity from quantum mechanics principles is developed. The Schroedinger wave equation is cast as a discretized matrix eigenvalue problem which is solved using the ERAU parallel supercomputer. The numerical …

Trustworthiness Requirements For Manufacturing Cyber-Physical Systems, Radu F. Babiceanu, Remzi Seker

Publications

Distributed manufacturing operations include cyber-physical systems vulnerable to cyber-attacks. Long time not considered a priority, cybersecurity jumped to the forefront of manufacturing concerns due to the need to network together legacy, newer equipment, and entire operation centers. This paper proposes trustworthiness solutions for integrated manufacturing physical-cyber worlds, where trustworthiness is defined to complement system dependability requirements with cybersecurity requirements, such that the resulting manufacturing cyber-physical system delivers services that can justifiably be trusted. Acknowledging the inevitability of cyber-attacks, the paper models the cybersecurity component using the resilient systems framework, where system resilience is viewed as preservation of a required state …

Wave Motion Induced By Turbulent Shear Flows Over Growing Stokes Waves, Shahrdad Sajjadi, Serena Robertson, Rebecca Harvey, Mary Brown

Publications

The recent analytical of multi-layer analyses proposed by Sajjadi et al. (J Eng Math 84:73, 2014) (SHD14 therein) is solved numerically for atmospheric turbulent shear flows blowing over growing (or unsteady) Stokes (bimodal) water waves, of low-to-moderate steepness. For unsteady surface waves, the amplitude a(t)∝ekcita(t)∝ekcit, where kcikci is the wave growth factor, k is the wavenumber, and cici is the complex part of the wave phase speed, and thus, the waves begin to grow as more energy is transferred to them by the wind. This will then display the critical height to a point, where the thickness of the inner …

Determination Of Rejected Landing Roll Runway Point-Of-No-Return And Go-Around In Transport Category Airplanes, Nihad E. Daidzic, Ph.D., Sc.D.

International Journal of Aviation, Aeronautics, and Aerospace

The decelerate-accelerate-takeoff maneuver in transport category airplanes has been discussed. Mathematical model based on total energy conservation has been used to calculate the rejected landing point-of-no-return on a runway which will still enable the airplane to safely execute go-around and achieve regulatory screen heights and takeoff safety speeds. After this point has been exceeded or below the point-of-no-return speed no go-around should ever be considered. Landing long and fast and/or decelerating on slippery runways may very well result in an overrun which could be prevented if the go-around is attempted before reaching this critical runway point. The point-of-no-return on the …

Design And Validation Of Hardware-In-The-Loop Testbed For Proximity Operations Payloads, Kristia K. Harris

Doctoral Dissertations and Master's Theses

The research presented here is a new testbed design for CubeSat and payload testing and development. This research demonstrates a low-cost, hardware-in-the-loop testing apparatus for use with university CubeSat programs for testing throughout the different levels of the development process. The average university CubeSat program undergoes very little hardware-in-the-loop testing. Most of the focus is the targeted towards performance testing and environmental testing which occur after completion the development process. This research shows that, for minimal schedule and cost impact, testing can occur early in the development process. The testbed presented here demonstrates suitable accuracy to be used for advanced …

Variable Viscosity Condition In The Modeling Of A Slider Bearing, Kedar Nath Uprety, S.C. Mancas

Publications

To reduce tear and wear of machinery lubrication is essential. Lubricants form a layer between two surfaces preventing direct contact and reduce friction between moving parts and hence reduce wear. In this short letter the lubrication of two slider bearings with parallel and nonparallel is studied. First, we show that bearings with parallel plates cannot support any load. For bearings with nonparallel plates we are interested on how constant and temperature dependent viscosity affects the properties of the bearings. Also, a critical temperature for which the bearings would fail due to excess in temperature is found for both latter cases. …

Aerodynamic Study Of Forces Due To Wind Velocity And Angle Of Attack On Parabolic Solar Troughs, Brian Northshield

Doctoral Dissertations and Master's Theses

Scant literature exists of the atmospheric effects on parabolic solar troughs. The technology is relatively new, so supporting studies by consequence are as well.

This study examines the effects of wind at various speeds, with various angles of attack on parabolic solar troughs. This begins by picking up on previous study, corroborating previously found data, then introduces new angles of attack. The model includes the presence of the solar tube where other studies omit.

The purpose of this study is to build a data set which is useful for structural consideration. During the course of this study, it was found …

Standoff Methods For The Detection Of Threat Agents: A Review Of Several Promising Laser-Based Techniques, J. Bruce Johnson, Susan D. Allen, Jonathan Merten, Lewis Johnson, Daniel Pinkham, Scott W. Reeve

Publications

Detection of explosives, explosive precursors, or other threat agents presents a number of technological challenges for optical sensing methods. Certainly detecting trace levels of threat agents against a complex background is chief among these challenges; however, the related issues of multiple target distances (from standoff to proximity) and sampling time scales (from passive mines to rapid rate of march convoy protection) for different applications make it unlikely that a single technique will be ideal for all sensing situations. A number of methods for spanning the range of optical sensor technologies exist which, when integrated, could produce a fused sensor system …

Design And Development Of Scalable Solar Powered Water Purification Systems For Developing Nations, Shavin Pinto

Doctoral Dissertations and Master's Theses

This thesis presents the design and development of solar powered water purification systems. The systems were designed to meet specific customer requirements that were established from the experiences gained after the installation of five water purification systems in various Haitian communities. The systems are scalable and are able to supply 10,000-20,000 gallons of clean drinking water per day. The design consists of a three-stage filtration system with a disc-type sediment filter, a 0.1 micron ultrafiltration membrane, and an ultraviolet light for disinfection. The backwash cycle extends the life of the ultrafiltration membrane to 4-7 years before a new filter is …

New Peril + Old Promises = Bad Results, Paul Eschenfelder

Paul F. Eschenfelder

No abstract provided.

Project Haiti 2012: Providing An Experiential Learning Experience Through The Design And Delivery Of A Water Purifier In Haiti, Yung Wong, Johnathon Camp, Shavin Pinto, Kyle Fennesy, Marc Compere, Yan Tang

Publications

In this paper, we share our experiences and lessons learned from Project Haiti 2012, a project to design and install a water purification system serving 20,000 people per day in the largest tent city in Haiti. Project Haiti 2012 was the third and largest system we have built for Haitians and represents a huge success for all participants and stakeholders. This paper discusses the unique experiential learning opportunity involved in the design and delivery of the water purifier in a foreign developing country. Multiple positive educational, social, and economic outcomes were achieved including students applying knowledge gained from coursework towards …

High Tech High Touch: Lessons Learned From Project Haiti 2011, Yan Tang, Marc Compere, Yung Lun Wong, Jared Anthony Coleman, Matthew Charles Selkirk

Publications

In this paper, we will share our experiences and lessons learned from a design project for providing clean water to a Haitian orphanage (Project Haiti 2011). Supported by funds from a renewable energy company and the university president’s office, five engineering students and two faculty members from Embry-Riddle Aeronautical University successfully designed and installed a solar powered water purification system for an orphanage located in Chambellan, Haiti. This paper discusses the unique educational experiences gained from unusual design constraints, such as ambiguity of existing facilities due to limited communication, logistics of international construction at a remote village location, and cross-cultural …

Multi-Disciplinary Hands-On Desktop Learning Modules And Modern Pedagogies, Bernard J. Van Wie, David B. Thiessen, Marc Compere, Ximena Toro, Jennifer C. Adam, Et Al.

Publications

Our team’s research focuses on fundamental problems in undergraduate education in terms of how to expand use of well researched, yet still “new”, teaching pedagogies of ‘sensing’ or ‘hands-on’, ‘active’ and ‘problem-based learning’ within engineering courses. It is now widely accepted that traditional lectures ARE NOT best for students – yet that is what the community almost universally does.

To address this issue we are developing new Desktop Learning Modules (DLMs) that contain miniaturized processes with a uniquely expandable electronic system to contend with known sensor systems/removable cartridges, as well as, unknown expansions to the project. We have shown that …

Singular Superposition/Boundary Element Method For Reconstruction Of Multi-Dimensional Heat Flux Distributions With Application To Film Cooling Holes, Mahmood Silieti, Eduardo Divo, Alain J. Kassab

Publications

A hybrid singularity superposition/boundary element-based inverse problem method for the reconstruction of multi-dimensional heat flux distributions is developed. Cauchy conditions are imposed at exposed surfaces that are readily reached for measurements while convective boundary conditions are unknown at surfaces that are not amenable to measurements such as the walls of the cooling holes. The purpose of the inverse analysis is to determine the heat flux distribution along cooling hole surfaces. This is accomplished in an iterative process by distributing a set of singularities (sinks) inside the physical boundaries of the cooling hole (usually along cooling hole centerline) with a given …

Transient Non-Linear Heat Conduction Solution By A Dual Reciprocity Boundary Element Method With An Effective Posteriori Error Estimator, Eduardo Divo, Alain J. Kassab

Publications

A Dual Reciprocity Boundary Element Method is formulated to solve non-linear heat conduction problems. The approach is based on using the Kirchhoff transform along with lagging of the effective non-linear thermal diffusivity. A posteriori error estimate is used to provide effective estimates of the temporal and spatial error. A numerical example is used to demonstrate the approach.

Simulation Of Engineering Systems Described By High-Index Dae And Discontinuous Ode Using Single Step Methods, Marc Compere

Publications

This dissertation presents numerical methods for solving two classes of or-dinary diferential equations (ODE) based on single-step integration meth-ods. The first class of equations addressed describes the mechanical dynamics of constrained multibody systems. These equations are ordinary differential equations (ODE) subject to algebraic constraints. Accordinly they are called differential-algebraic equations (DAE).

Specific contributions made in this area include an explicit transforma-tion between the Hessenberg index-3 form for constrained mechanical systems to a canonical state-space form used in the nonlinear control communities. A hybrid solution method was developed that incorporates both sliding-mode control (SMC) from the controls literature and post-stabilization from …