Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Publication
- Publication Type
- File Type
Articles 1 - 15 of 15
Full-Text Articles in Mechanical Engineering
Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements
Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements
Senior Design Project For Engineers
This details the progress of the ENERCON pump replacement project as completed by the Kennesaw State University interdisciplinary senior design group. This project is a two-semester capstone effort for the engineering program at Southern Polytechnic School of Engineering, overseen by Dr. McFall during Fall 2020 and Dr. Khalid during Spring 2021 semesters. The 2020-2021 KSU Interdisciplinary Senior Design team was tasked with completing an Engineering Change Package (ECP) for existing vacuum pumps at ENERCON Station. The mechanical, electrical, and civil students worked together, performing evaluations on existing plant systems to ensure the plant could support the new vacuum pumps. By …
Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield
Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield
All Undergraduate Projects
What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …
Fish Farming Aerator, Kylie Johnson, Therese Rosalez, Jordan Hendricker, Ryan Froidcoeur
Fish Farming Aerator, Kylie Johnson, Therese Rosalez, Jordan Hendricker, Ryan Froidcoeur
Scholar Week 2016 - present
Designing, building and installing a functional and efficient aerator prototype suitable for small pond intensive aquaculture use in El Faro, Guatemala. The project’s purpose is to provide a solution for farming tilapia. A successful project outcome will help impoverished families to raise tilapia for food and income The team will install the aeration system on-site in El Faro, Guatemala.
Nucor Steel Storage Rack Design, Mac Hanson, Hannah Cataldo, Jason Ziganto, Robert Wozek
Nucor Steel Storage Rack Design, Mac Hanson, Hannah Cataldo, Jason Ziganto, Robert Wozek
Scholar Week 2016 - present
The goal of this design project was to build effective steel storage racks for Nucor Steel Kankakee. The important criteria that the design team needed to meet was that the rack was adjustable, could fit all of the manufactured products that Nucor makes, and could fit various lengths of product. Nucor needs a new rack system because their current process makes the shipping process very inefficient.
Dual Degree Agreement For College Of Engineering With Tennessee Wesleyan, University Of Tennessee, Knoxville
Dual Degree Agreement For College Of Engineering With Tennessee Wesleyan, University Of Tennessee, Knoxville
SACSCOC Documentation
No abstract provided.
Ut Lineman Chute, Benjamin D. Jacob, Logan T. Sissom, Stephen E. Brennan, Thomas B. Mcdavid
Ut Lineman Chute, Benjamin D. Jacob, Logan T. Sissom, Stephen E. Brennan, Thomas B. Mcdavid
Chancellor’s Honors Program Projects
No abstract provided.
Integrating E-Learning Modules Into Engineering Courses To Develop An Entrepreneurial Mindset In Students, Nadiye O. Erdil, Ronald S. Harichandran, Jean Nocito-Gobel, Maria-Isabel Carnasciali, Cheryl Q. Li
Integrating E-Learning Modules Into Engineering Courses To Develop An Entrepreneurial Mindset In Students, Nadiye O. Erdil, Ronald S. Harichandran, Jean Nocito-Gobel, Maria-Isabel Carnasciali, Cheryl Q. Li
Engineering and Applied Science Education Faculty Publications
Engineering graduates who will be leaders in today’s rapidly changing environment must possess an entrepreneurial mindset and a variety of professional skills in addition to technical knowledge and skills. An entrepreneurial mindset applies to all aspects of life, beginning with curiosity about our changing world, integrating information from various resources to gain insight, and identifying unexpected opportunities to create value. The Kern Entrepreneurial Engineering Network (KEEN) defines curiosity, connections and creating value as three core components of an entrepreneurial mindset. These 3Cs coupled with associated engineering skills forms KEEN’s entrepreneurial mindset framework. An entrepreneurial mindset enables engineers to develop sound …
The Quasi-Static Deformation, Failure, And Fracture Behavior Of Titanium Alloy Gusset Plates Containing Bolt Holes, Therese Hurtuk, Craig Menzemer, Anil Patnaik, Tirumalai Srivatsan, Kannan Manigandan, T. Quick
The Quasi-Static Deformation, Failure, And Fracture Behavior Of Titanium Alloy Gusset Plates Containing Bolt Holes, Therese Hurtuk, Craig Menzemer, Anil Patnaik, Tirumalai Srivatsan, Kannan Manigandan, T. Quick
Craig Menzemer
In this article, the influence of bolt holes, specifically their number and layout on strength, deformation, and final fracture behavior of titanium alloy gusset plates under the influence of an external load is presented and discussed. Several plates having differences in both the number and layout of the bolt holes were precision machined and then deformed under quasi-static loading. The specific influence of number of bolt holes and their layout on maximum load-carrying capability and even fracture load was determined. The conjoint influence of bolt number, bolt layout pattern, nature of loading, contribution from local stress concentration, and intrinsic microstructural …
The Bolt Bearing Response And Tensile Deformation Capacity Of Plates Made From A Titanium Alloy, Nicholas Tinl, Craig Menzemer, Anil Patnaik, Tirumalai Srivatsan
The Bolt Bearing Response And Tensile Deformation Capacity Of Plates Made From A Titanium Alloy, Nicholas Tinl, Craig Menzemer, Anil Patnaik, Tirumalai Srivatsan
Craig Menzemer
In this article, the bearing capacity and elongation characteristics of bolt holes in a titanium alloy (i.e., Ti-6Al-4V) deformed in uniaxial tension is presented and discussed. The specific role played by bolt hole confinement on bearing capacity is highlighted. The nature of final fracture is examined and the intrinsic features present on the fracture surface are rationalized in concurrence with macroscopic mechanical response. The behavior of the candidate alloy (Ti-6Al-4V) is compared with conventionally preferred and chosen candidate materials steel and aluminum alloys. An empirical relationship suitable for purpose of structural design is proposed.
Understanding The Mechanical Response Of Built-Up Welded Beams Made From Commercially Pure Titanium And A Titanium Alloy, Anil Patnaik, Narendra Poondla, Craig Menzemer, Tirumalai Srivatsan
Understanding The Mechanical Response Of Built-Up Welded Beams Made From Commercially Pure Titanium And A Titanium Alloy, Anil Patnaik, Narendra Poondla, Craig Menzemer, Tirumalai Srivatsan
Craig Menzemer
During the last two decades, titanium has gradually grown in stature, strength and significance to take on the recognition of being a modern and high performance metal that is noticeably stronger and concurrently lighter than the most widely chosen and used steels in a spectrum of industrial applications. Technological innovations have necessitated reduction of part weight, cost and lead time, including concurrent enhancement of performance of structural parts and components made using titanium and its alloys. This has provided the impetus to develop economically viable structural design methodologies and specifications, while at the same time bringing forth innovative and economically …
Isolating Corrosion Of Steel Plates Coupled With Titanium, Anil Patnaik, X. Shan, M. Adams, T. Srivatsan, Craig Menzemer, Joe Payer
Isolating Corrosion Of Steel Plates Coupled With Titanium, Anil Patnaik, X. Shan, M. Adams, T. Srivatsan, Craig Menzemer, Joe Payer
Craig Menzemer
Over twenty six percent of the bridges in the United States are structurally deficient or functionally obsolete. Corrosion of steel used in structures like bridges and buildings is a problem that has gained increased interest and focused concern. Steel is often the metal that is preferred for use in such applications due to a synergism of ease of availability, acceptable mechanical properties and cost effectiveness. Through the years, titanium has grown in strength, stature and significance to be recognized as an emerging high performance metal that is both stronger and lighter than steel. A distinctive property of titanium and its …
Infuence Of Welding And Heat Treatment On Microstructure, Properties And Fracture Behaviour Of A Wrought Aluminium Alloy, Eric Hilty, Craig Menzemer, Kannan Manigandan, Tirumalai Srivatsan
Infuence Of Welding And Heat Treatment On Microstructure, Properties And Fracture Behaviour Of A Wrought Aluminium Alloy, Eric Hilty, Craig Menzemer, Kannan Manigandan, Tirumalai Srivatsan
Craig Menzemer
Welding of aluminium alloy, belonging to the 6XXX series, exerts an adverse influence on its strength. The loss of strength immediately adjacent to the welds can have an influence on overall behaviour of the structure or component. In this study, the technique of gas metal arc welding was used. The filler material used was a silicon-containing aluminium alloy. Subsequent to welding, the alloy (6061-T4) was subjected to post-weld heat treatment (PWHT) at 185°C for 6 h. Both the as-welded and artificially aged extrusions of aluminium alloy 6061 were examined for both microstructural development and resultant influence on mechanical properties. Light …
Extrinsic Influence Of Environment On The Corrosion Behaviour Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, Kannan Manigandan, Tirumalai Srivatsan
Extrinsic Influence Of Environment On The Corrosion Behaviour Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, Kannan Manigandan, Tirumalai Srivatsan
Robert Y. Liang
A new type of enamel coated dowel bars for use as concrete pavements has been recently developed and implemented. A gradual deterioration of such bars can occur due to corrosion occurring at locations of the fine microscopic cracks and other defects in the coating. The results of a study aimed at evaluating and understanding the corrosion resistance of such dowel bars is presented and comparisons made with corresponding epoxy-coated dowel bars. Identical defects were introduced onto the surface of the dowel bars with the two types of coatings. The extrinsic influence of environment and resultant corrosion based on type, location …
Extrinsic Influence Of Environment On The Corrosion Behavior Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, K. Manigandan, Tirumalai Srivatsan
Extrinsic Influence Of Environment On The Corrosion Behavior Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, K. Manigandan, Tirumalai Srivatsan
Robert Y. Liang
A new type of enamel coated dowel bars for use as concrete pavements has been recently developed and implemented. A gradual deterioration of such bars can occur due to corrosion occurring at locations of the fine microscopic cracks and other defects in the coating. The results of a study aimed at evaluating and understanding the corrosion resistance of such dowel bars is presented and comparisons made with corresponding epoxy-coated dowel bars. Identical defects were introduced onto the surface of the dowel bars with the two types of coatings. The extrinsic influence of environment and resultant corrosion based on type, location …
Civil And Mechanical Engineering Students Learning Mechanics In A Multidisciplinary Engineering Foundation Spiral, Jean Nocito-Gobel, Gregory Broderick, Samuel Bogan Daniels, Michael Collura, Richard Stanley
Civil And Mechanical Engineering Students Learning Mechanics In A Multidisciplinary Engineering Foundation Spiral, Jean Nocito-Gobel, Gregory Broderick, Samuel Bogan Daniels, Michael Collura, Richard Stanley
Engineering and Applied Science Education Faculty Publications
This paper describes how mechanical and civil engineering students are introduced to and develop an understanding of mechanics concepts through a sequence of integrated courses as part of a new curriculum taken during the freshman and sophomore years. The Multi- Disciplinary Engineering Foundation Spiral is a four-semester sequence of engineering courses, matched closely with the development of students’ mathematical sophistication and analytical capabilities and integrated with course work in the sciences. Students develop a conceptual understanding of engineering basics in this series of courses, which stress practical applications of these principles. Mechanics concepts are introduced in a pair of first …