Mechanical Engineering Commons^™

Dynamic Properties Of Railway Track And Its Components : A State-Of-The-Art Review, Sakdirat Kaewunruen, Alexander Remennikov

Faculty of Engineering - Papers (Archive)

Recent findings indicate one of major causes of damages, which is attributed to the resonant behaviours, in a railway track and its components. Basically, when a railway track is excited to generalised dynamic loading, the railway track deforms and then vibrates for certain duration. Dynamic responses of the railway track and its components are the key to evaluate the structural capacity of railway track and its components. If a dynamic loading resonates the railway track’s dynamic responses, its components tend to have the significant damage from excessive dynamic stresses. For example, a rail vibration could lead to defects in rails …

Detection Of Voids In Prestressed Concrete Bridges Using Thermal Imaging And Ground-Penetrating Radar, David G. Pollock, Kenneth J. Dupuis, Benjamin Lacour, Karl R. Olsen

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Thermal imaging and ground-penetrating radar was conducted on concrete specimens with simulated air voids. For the thermal imaging inspections, six concrete specimens were constructed during the month of June 2007 to simulate the walls of post-tensioned box girder bridges. The objective was to detect simulated air voids within grouted post-tensioning ducts, thus locating areas where the post-tensioning steel strands are vulnerable to corrosion. The most important deduction taken from these inspections was that PT-ducts and simulated voids were more detectable in the 20 cm (8 in.) thick specimens than in the 30 cm (12 in.) thick specimens. While inspections of …

Development Of A Mathematical Model For 3d Reconstruction Of Target Objects By Photogrammetry, Keith F. Blonquist

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis outlines the development of a mathematical model which can be used to perform 3D reconstruction of a target object from surveillance images. 3D reconstruction is a common procedure in photogrammetry, but performing 3D reconstruction from surveillance images can be more difficult than typical photogrammetry applications.

Surveillance images are generally captured in an unsystematic manner because there is no control over the target that is being photographed. Surveillance images can have a wide variety of fields of view, are often captured with uncalibrated cameras, and typically the targets are objects for which there is no other a priori information. …

Dynamic Responses Of Marine Risers/Pipes Transporting Fluid Subject To Top End Excitations, J. Leklong, S. Chucheepsakul, S. Kaewunruen

Faculty of Engineering - Papers (Archive)

This paper deals with the dynamic responses to top end excitation of marine risers/pipes conveying internal fluid. The marine riser is often used as a flexible link between undersea bore head and subsurface offshore platform. The tidal waves and the changes of sea level consistently excite its top end connected to a floating vessel. In order to carry out the performance-based design of the marine risers, the evaluation of their dynamic responses to top end excitations is imperative. In this study, the marine riser is simulated using twodimensional beam elements. Energy functional of the marine risers conveying fluids is derived …

Isolation Of Methyl Laurate From Coconut Oil As Raw Material For Fatty Alcohol Sulfate, Rita Arbianti, Tania Surya Utami, Astri Nugroho

Makara Journal of Technology

Isolation of Methyl Laurate from Coconut Oil as Raw Material for Fatty Alcohol Sulfate. Methyl laurate is a raw or base material for many industries, including surfactant industries. In this research, coconut oil (VCO) is transesterified with methanol to produce methyl ester, using NaOH as the catalyst. Methyl laurate is then separated by method based on the difference in melting point. This research focuses at determining the effects of some variables in transesterification on the concentration of produced methyl laurate. The variables are temperature (40 oC, 50 oC, 60 oC, 80 oC), time of transesterification reaction (0,5 hour, 1 hour, …

Two Element Microstrip Antenna Array With Defected Ground Structure, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo, Muhamad Asvial, Djoko Hartanto

Makara Journal of Technology

Two Element Microstrip Antenna Array with Defected Ground Structure. This paper presents a two element microstrip antenna array using trapezium shape defected ground structure (DGS). The DGS is inserted in the ground plane between two elements of antenna array. Insertion of the DGS is intended to suppress the mutual coupling effect produced by antenna array. Simulation and measurement results were taken and compared between antenna array with and without DGS. Measurement results show that the antenna with DGS compared to antenna without DGS can suppress mutual coupling effect to 7.9 dB, improve the return loss to 33.29% from -30.188 dB …

Physical Characteristics And Utilization Oft The Karst Beaches In Kabupaten Gunungkidul, Astrid Damayanti, Ranum Ayuningtyas

Makara Journal of Technology

Physical Characteristics and Utilization oft the Karst Beaches in Kabupaten Gunungkidul. Karsts beaches at Gunungkidul Regency (Baron, Kukup, Sepanjang, Drini, Krakal, Ngandong, and Sundak), located in south of Daerah Istimewa Yogyakarta Province, have economic potential. Even they have similarity in geological condition (genesis and morphological processes), but they have different physical characteristics. Based on result of observation environment on morphological conditions and spatial analysis method, we found the proper utilization of the beaches.

Spectral Response Surfaces And The Ringing Response Of Offshore Structures, I Ketut Suastika

Makara Journal of Technology

A method, called spectral response surface method, is proposed for the study of the ringing phenomenon of offshore structures. Newman’s results for diffraction force on a column were reformulated in terms of the frequency components of the ocean surface and their Hilbert transforms. Using a first-order reliability method together with a dynamic model for the structural response, it is straightforward to calculate the ocean surface history most likely to generate an extreme ringing response and the ringing response history.

Neutron Irradiation On Ss316 Material For Radioactive Endovascular Stent Production, Rohadi Awaludin, Abidin Abidin, Sriyono Sriyono

Makara Journal of Technology

Neutron Irradiation on SS316 Material for Radioactive Endovascular Stent Production. It was reported that restenosis could be prevented by radioactive endovascular stent. SS316 material of endovascular stent has been irradiated at pneumatic rabbit system of G.A. Siwabessy reactor for 5 minutes for producing radioactive stent by neutron activation. After 10 days of decay, the irradiated SS316 was measured by gamma spectrometer. The radioisotopes of 51Cr, 59Fe and 60Co were detected in the irradiated SS316 with radioactivity of 5990, 107 and 109 Bq/mg respectively. The Calculation results showed that radioisotopes of 51Cr, 59Fe and 55Fe were produced by neutron activation. The …

Phase Unwrapping Insar Image Using Local Energy Minimization Approach, Kusworo Adi, Tati L.R. Mengko, Andriyan B. Suksmono, Hendra Gunawan

Makara Journal of Technology

Phase Unwrapping InSAR Image Using Local Energy Minimization Approach. Reconstruction process of phase data from its cover is called Phase Unwrapping (PU). Ideally, without any noise phrase, singularity, and aliasing problems, the phase information can be unwrapped easily. However, in fact, the phase data actually always get noise disturbance and discontinuity. The PU process becomes more complicated and needs a better PU algorithm to address the problems properly. In this research, the local PU algorithm is developed using minimization of close related firstorder pixels energy approach. In this method, the energy difference between four close related pixels is counted, followed …

Hydrogen Absorption In Weldments Of Overlaid Claded Pressure Vessel, Ronnie Higuchi Rusli

Makara Journal of Technology

Cracks was found in type 347 stainless steel internal attachment welds of a reactor for a high temperature, and high pressure hydrogen service. One of the possible causes of cracking is low cycle fatigue cracking induced by repetition of thermal stress to embrittled weld metal. Type 347 weld metal loses its ductility by presence of sigma phase and hydrogen.

The Decompositioning Of Volatile-Matter Of Tanjung Enim Coal By Using Thermogravimetry Analyzer (Tga), Nukman Nukman

Makara Journal of Technology

The Decompositioning of Volatile-Matter of Tanjung Enim Coal by using Thermogravimetry Analyzer (TGA). Coal is a nature material which a kind of energy source. The decompotition of coal could analyze by heat treated using thermogravimetry analyzer. The decomposition of the volatile matter for three kinds of Tanjung Enim coal could be known. The value of activation energy that be found diference, then for Semi Anthracite, Bitumonius and Sub Bituminous Coal, the initial temperatures are 60.8 oC, 70.7 oC, 97.8oC, and the last temperatures are 893.8 oC, 832 oC, 584.6oC.

European Climate Policy And The Position Of Cyprus, Theodoros Zachariadis

Theodoros Zachariadis

No abstract provided.

Ole Miss Engineer 2008

Ole Miss Engineer

No abstract provided.

Reliability Analysis Of Plank Decks, Andrzej S. Nowak, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The objective of this study is to summarize the load and resistance criteria for highway bridge plank decks, and to estimate the reliability of plank decks designed by AASHTO Code. Both transverse and longitudinal planks for a variety of typical stringer spacings and plank sizes are considered. Truck traffic load data is based on the model used to calibrate the 1994 AASHTO LRFD Code. However, for plank decks, wheel load rather than whole vehicle weight is most important, and these statistics are developed for this study. For wood planks, dead load and dynamic load are not significant. The limit state …

Development Of A Particle Flow Test For Rotational Molding, Russell B. Whatcott

Theses and Dissertations

One of the current testing method (the Dry Flow test) to qualify resin for use in production in the rotomolding process has been shown to have many flaws in both equipment and procedure. Research was done here to investigate a possible alternative that could eliminate some of these testing deficiencies. By reducing equipment and operator errors, the testing of materials becomes more valuable of an exercise. The Angular Flow test developed in this research can increase repeatability. By coming to understand the rotational molding process better, an evaluation that can give more valid information was devised.

Fuel Taxation And Social Policy, Theodoros Zachariadis

Theodoros Zachariadis

No abstract provided.

College Of Engineering Senior Design Competition Spring 2008, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

The Effect Of Ozone And Zeolite Concentration To The Performance Of The Treatment Of Wastewater Containing Heavy Metal Using Flotation Process, Eva Fathul Karamah, Setijo Bismo, Hotdi M. Simbolon

Makara Journal of Technology

The Effect of Ozone and Zeolite Concentration to the Performance of the Treatment of Wastewater Containing Heavy Metal Using Flotation Process. Industrial wastewater which contains heavy metal cannot be disposed to the environment directly, due to its toxicity. In this research, separation of metal from wastewater was conducted by sorptive flotation method, using Lampung natural zeolite as bonding agent. The most common diffuser used in the flotation process is air or oxygen. In this research, ozone is used as diffuser because it is a stronger oxidant and more dissolvable in water than oxygen. Besides, ozone is a coagulant aid and …

The Development Of Inverter Fuzzy Logic Control For Induction Motor Control By Vector Control Method In Electric Vehicle, Era Purwanto, Mohammad Ashary, Subagio Subagio, Mauridhi Heri Purnomo

Makara Journal of Technology

The development of Inverter Fuzzy Logic Control for Induction Motor Control by Vector Control Method in Electric Vehicle. In response to concerns about energy cost, energy dependence, and environmental damage, a rekindling of interest in electric vehicles (EV’s) has been obvious. Thus, the development of power electronics technology for EV’s will take an accelerated pace to fulfill the market needs, regarding with the problem in this paper is presented development of fuzzy logic inverter in induction motor control for electric vehicle propulsion. The Fuzzy logic inverter is developed in this system to directed toward developing an improved propulsion system for …

Ad Hoc On-Demand Distance Vector (Aodv) Routing Protocol Performance Evaluation On Hybrid Ad Hoc Network: Comparison Of Result Of Ns-2 Simulation And Implementation On Testbed Using Pda, Riri Fitri Sari, Abdusy Syarif, Bagio Budiardjo

Makara Journal of Technology

Ad Hoc on-Demand Distance Vector (AODV) Routing Protocol Performance Evaluation on Hybrid Ad Hoc Network: Comparison of Result of Ns-2 Simulation and Implementation on Testbed using PDA. In Mobile Ad hoc NETwork (MANET), node supplemented with wireless equipment has the capacity to manage and organise autonomously, without the presence of network infrastructures. Hybrid ad hoc network, enable several nodes to move freely (mobile) to create instant communication. Independent from infrastructure. They could access the Local Area Network (LAN) or the Internet. Functionalities of ad hoc network very much dependent on the routing protocol that determines the routing around node. Ad …

Internet Congestion Control System, Pranoto Hidaya Rusmin, Carmadi Machbub, Agung Harsoyo, Hendrawan Hendrawan

Makara Journal of Technology

Internet Congestion Control System. Internet congestion occurs when resource demands exceeds the network capacity. But, it is not the only reason. Congestion can happen on some users because some others user has higher sending rate. Then some users with lower sending rate will experience congestion. This partial congestion is caused by inexactly feedback. At this moment congestion are solved by the involvement of two controlling mechanisms. These mechanisms are flow/congestion control in the TCP source and Active Queue Management (AQM) in the router. AQM will provide feedback to the source a kind of indication for the occurrence of the congestion …

Ole Miss Engineer 2008

Ole Miss Engineer

No abstract provided.

The Role Of 1 And 9 Wt.% Zn In Precipitation Hardening Of Aa319 Aluminium, Bondan Tiara Sofyan, Sari Susanti, Ridwan R. Yusfranto

Makara Journal of Technology

The Role of 1 and 9 wt.% Zn in Precipitation Hardening of AA319 Aluminium. Aluminium alloys are widely used for automotive application due to its low density and high corrosion resistance. For economic reason, casting of automotive products always uses aluminium scrap as charging materials that may result in fluctuation of content of alloying element, such as Zn. This research studies the role of Zn in precipitation hardening of AA319 aluminium alloys. Hardness and tensile testing were conducted to study the mechanical properties of the alloys, while ageing response was followed by hardness measurements. Evolution of microstructures was observed by …

A Study Of Co2 Absorption Using Jet Bubble Column, Setiadi Setiadi, Nita Tania Hadiyani, Hantizen Hantizen, Dijan Supramono

Makara Journal of Technology

A Study of CO2 Absorption Using Jet Bubble Column. The phenomenon of plunging jet gas-liquid contact occurs quite often in nature, it's momentum carries small air bubbles with it into the reactor medium. The momentum of the liquid stream can be sufficient to carry small bubbles completely to the bottom of the vessel. A stream of liquid falling toward a level surface of that liquid will pull the surrounding air along with it. It will indent the surface of the liquid to form a trumpet-like shape. If the velocity of the stream is high enough, air bubbles will be pulled …

Building Fire Safety Audit At Faculty X, University Of Indonesia, Year 2006, Fatma Lestari, Rm. Yodan Amaral Panindrus

Makara Journal of Technology

Building Fire Safety Audit at Faculty X, University of Indonesia, Year 2006. Fire may cause loss of life, material and valuable assets. The objective of this study is to conduct audit for fire safety and emergency response in the building at Faculty X, University of Indonesia, Depok. The audit results on the building fire safety facilities including emergency response and preparedness are then compared to the Building Code Australia (BCA) and Indonesian regulation on the building fire safety (Kep.MenPU.No 10 and 11/KPTS/2000). The building selected are Building A, B, C, D, F and G. Building classification for A, B, D, …

Substrates Preparation From Woody Tropical Waste Biomass For Biohydrogen Production, Dwi Susilaningsih, Theresia Umi Harwati, Khairul Anam, Yopi Yopi

Makara Journal of Technology

Substrates Preparation from Woody Tropical Waste Biomass for Biohydrogen Production. Addressing to the global warming problem, energy crisis and pollution, hydrogen production by micro-organisms using biotechnological approach should be considered, since it fulfils the recent society requirement to safely produce, renewable and environmental friendly energy. Hydrogen is one of the most promising green energy sources, because it is easily converted to electricity and cleanly combustible. There are three types of micro-organisms for hydrogen production, the first is cyanobacteria through the photosynthesis process, the second is anaerobic bacteria, which use organic substances as electron donor and energy and convert them to …

Biomass Production Chlorella Vulgaris Buitenzorg Using Series Of Bubble Column Photo Bioreactor With A Periodic Illumination, Anondho Wijanarko, Dianursanti Dianursanti, Muryanto Muryanto, Josia Simanjuntak, Praswasti Pembangun Dyah Kencana Wulan, Heri Hermansyah, Misri Gozan, Roekmijati Widaningroem Soemantojo

Makara Journal of Technology

Chlorella vulgaris Buitenzorg cultivation using three bubble column photo bioreactors arranged in series with a volume of 200 mL for 130 hours shows an increase of biomass production of Chlorella vulgaris Buitenzorg up to 1.20 times and a decrease of the ability of CO2 fixation compared to single reactor at a periodic sun illumination cycle. The operation conditions on cultivation are as following: T, 29.0oC; P,1 atm.; UG, 2.40 m/h; CO2, 10%; Benneck medium; and illumination source by Phillip Halogen Lamp 20W /12V/ 50Hz. Other research parameters such as microbial carbon dioxide transferred rate (qco2), CO2 transferred rate (CTR), energy …

Parallel Mpi/Fortran Finite Element Symmetrical/Unsymmetrical Domain Decomposition, Siroj Tungkatara

Civil & Environmental Engineering Theses & Dissertations

MPI/FORTRAN finite element analysis software based on Domain Decomposition (DD) formulas has been developed in this work. Efficient input data storage/data communication schemes, domain partitioning, fast symbolical and numerical sparse assembly, symmetrical/unsymmetrical sparse solver and robust symmetrical/unsymmetrical iterative solvers algorithms are all incorporated into the developed code. Parallel Precondition Conjugated Gradient (PCG) and Flexible Generalized Minimum Residual (FGMRES) are developed. Efficient computational techniques used in the developed code are explained. Numerical performance and the accuracy of the developed code are conducted on acoustic examples with medium to large grid sizes. The results obtained from ODU Wilbur cluster (under parallel processing …

Proceedings From Scientific Conference On Green Energy And It, Dr. Erik Dahlquist

Dr. Erik Dahlquist

This conference is part of the annual Energitinget, a national arena for energy in Sweden, with some 2500 participants. The focus with this session is to give a forum for researchers to present scientific results, and also to discuss these with other researchers. It contains papers in the area of Energy and IT as well as Green energy generally