Mechanical Engineering Commons^™

Experimental Simulation Of Tornado-Like Vortices And Their Impact On High-Rise Buildings, Arash Ashrafi

Electronic Thesis and Dissertation Repository

One of the most crucial research areas in wind engineering is tornadoes due to the widespread damages to infrastructure and the environment in North America and other parts of the world. The proper scaling of tornadoes in experimental facilities, generating tornado-like vortices (TLVs) is, therefore, an essential part of evaluating tornado-indued damages on engineered buildings. The capability of producing TLVs of length scales in the range between 1:300 and 1:150 inside the Wind Engineering, Energy and Environment (WindEEE) Dome at Western University has already been demonstrated using only one mode of the full potential of this simulator. A new mode …

Effects Of Turbulence On The Separating-Reattaching Flow Above Surface-Mounted, Three-Dimensional Bluff Bodies, Abul Fahad Akon

Electronic Thesis and Dissertation Repository

Investigations of separated and reattaching flows over three-dimensional bluff bodies in turbulent boundary layers are important because of the large aerodynamic loads that these flows cause. For example, roofs of low-rise buildings are vulnerable to this kind of wind loading. Turbulence in the upstream flow affects the pressure distributions and the mean size of separation bubbles formed on bluff body surfaces. Whereas a number of studies have focussed on two-dimensional separation bubbles and surface pressures, a comprehensive understanding of the surface pressures and the separating-reattaching flows in relation to the turbulence in the incident boundary layers for surface-mounted, three-dimensional bluff …

Numerical Studies For Improving Fracture Toughness Resistance Curve Testing Using Single-Edge (Notched) Tension Specimens, Yifan Huang

Electronic Thesis and Dissertation Repository

The fracture toughness resistance curve, i.e. the J-integral resistance curve (J-R curve) or the crack tip opening displacement resistance (CTOD-R) curves, is widely used in the integrity assessment and strain-based design of energy pipelines with respect to planar defects (i.e. cracks). This thesis deals with issues related to the experimental determination of the J(CTOD)-R curves using the newly-developed single-edge (notched) tension (SE(T)) specimens. In the first study, the plastic geometry factor, i.e. the η_pl factor, used to evaluate J in a J-R curve test based on …

Wind And Thermal Effects On Ground Mounted Photovoltaic (Pv) Panels, Chowdhury Mohammad Jubayer

Electronic Thesis and Dissertation Repository

A combination of Computational Fluid Dynamics (CFD) simulations and wind tunnel experiments are carried out to investigate the effects of wind on the aerodynamic loading and heat transfer of a ground mounted stand-alone photovoltaic (PV) panel with tilt angle of 25^o in open country atmospheric boundary layer. Several azimuthal wind directions are considered: Southern 0^o, Southwest 45^o, Northwest 135^o and Northern 180^o. Three dimensional Reynolds-Averaged Navier-Stokes (RANS) approaches with an unsteady solver using Shear Stress Transport (SST) k-ω turbulence closure are employed for the CFD simulations, whereas Particle Image Velocimetry (PIV) and …

Hydrogeological And Thermal Sustainability Of Geothermal Borehole Heat Exchangers, S. Emad Dehkordi

Electronic Thesis and Dissertation Repository

Assessment of the current approach taken by guidelines and design methods of vertical closed loop heat exchangers shows that often groundwater flow is either disregarded or is not methodically incorporated. The state of scientific research in this arena reveals that overlooking the groundwater flow in the design procedure may not always be a correct assumption. The significance of advective heat transport compared to conduction is defined by the groundwater flux or Darcy velocity which heavily depends on the hydraulic conductivity of the ground, followed by the hydraulic gradient which has a relatively limited range. A sensitivity analysis on ground and …

Finite Element Analyses Of Single-Edge Bend Specimens For J-R Curve Development, Yifan Huang

Electronic Thesis and Dissertation Repository

The fracture toughness resistance curve such as the J-integral resistance curve (J-R curve) is widely used in the integrity assessment and strain-based design of energy pipelines with respect to planar defects (i.e. cracks). Two studies about the development of the J-R curve are carried out and reported in this thesis. In the first study, the plastic geometry factor, i.e. the η_pl factor, used to evaluate J in a J-R curve test based on the single-edge bend (SE(B)) specimen is developed based on the three-dimensional (3D) finite element analysis (FEA). The main …

Experimental Investigation Of Wind Effect On Solar Panels, Ayodeji Abiola-Ogedengbe

Electronic Thesis and Dissertation Repository

Photovoltaic Solar Panels for electricity generation are outdoor low-rise structures that are vulnerable to damage by the wind. The existing building codes do not contain information about the impact of the wind on these structures and hence do not provide comprehensive guidelines to mitigate such impact. The present study is a contribution to the ongoing efforts to codify the wind loading on solar panels. In this study, experimental investigations were conducted on the scaled model of a ground-mounted solar panel structure whose surface is geometrically similar to an inclined flat plate and mounted on three-legged support. The panel comprises of …

Consistent Density Scanning And Information Extraction From Point Clouds Of Building Interiors, Kuldeep Kumar Sareen

Electronic Thesis and Dissertation Repository

Over the last decade, 3D range scanning systems have improved considerably enabling the designers to capture large and complex domains such as building interiors. The captured point cloud is processed to extract specific Building Information Models, where the main research challenge is to simultaneously handle huge and cohesive point clouds representing multiple objects, occluded features and vast geometric diversity. These domain characteristics increase the data complexities and thus make it difficult to extract accurate information models from the captured point clouds.

The research work presented in this thesis improves the information extraction pipeline with the development of novel algorithms for …

Vortex Shedding From Elongated Bluff Bodies, Zachary J. Taylor

Electronic Thesis and Dissertation Repository

As the spans of suspension bridges increase, the structures become inherently flexible. The flexibility of these structures, combined with the wind and particular aerodynamics, can lead to significant motions. From the collapse due to flutter of the Tacoma Narrows Bridge to the case of vortex-induced vibrations (VIV) of the Storebælt Bridge, it is evident that a better understanding of the aerodynamics of these geometries is necessary. The work herein is motivated by these two problems and is presented in two parts.

In the first part, the focus is on the physical mechanisms of vortex shedding. It is shown that the …