Engineering Science and Materials Commons^™

Dual-Adaptive Camouflage For The Hyperstealth Corperation, Keith J. Carlock Mr.

The STEAM Journal

Dual-Adaptive Camouflage, though still a concept that I've had for 28 years, seems to me, more promising that the bulk and brain power and needed energy supply of a computer-driven network of optical electronic harnesses that would be the basis for any suit that proclaims to render its wearer invisible.

Prospects For Solving The Problem Of Rational Use Of Water Resources Using The Tiiame-1 Sprinkling Machine, M.Kh. Khamidov, A.R. Muratov

Irrigation and Melioration

The information published by the International Commission on Irrigation and Drainage, and the intermediate results of many years of research carried out by scientists from TIIAME on the development, research and implementation of water-saving technologies in agriculture are presented. The acute shortage of water resources in Central Asia, the problems of increasing the efficiency of the use of water-saving technologies around the world have led to the careful use of available water resources in the region, including the prospects and advantages of using irrigation of crops by sprinkling, as well as the design and technical parameters of the sprinkler developed …

Inadequacy Of Current Water Use Planning At The Level Of Water Users And Wuas, A.A. Alimdjanov, A.Kh. Karimov, B.R. Nasibov

Irrigation and Melioration

This paper studies the main issues of water use planning at the level of water consumers and water user associations (WUA). The study carried out in Bulakbashi district of Andijan province of Uzbekistan, where the main source of irrigation water is the Southern Fergana Main Canal. The study followed two-stage procedure. During the first stage we compiled water use plans for the WUA and water consumers based on the applied methodology of water use planning. Then, at the second stage, we analyzed the results of the actual implementation of the farm water consumption plans and WUA water use plan, and …

Technology And Technical Device Used In The Efficient Use Of Water Resources In Irrigated Agriculture, А.U. Аtajanov

Irrigation and Melioration

The economical use of water resources, the improvement and development of new technology and technical means for its implementation, ensuring the saving of irrigation water is one of the most important issues of today. This article is devoted to the issues of improving the technology of irrigation of furrows and the creation of technical means,also recommended technology and using from created technical device in selected per experiment fields and analyzing their results.

Empirical Assessment Of Climate Change Impacts On Agriculture In Samarkand Region, Sh.B. Babakholov

Irrigation and Melioration

Agricultural production is highly sensitive to climate factors like other endogenous factors, and the expected climate change projections may have a negative impact on the efficiency and income of agricultural producers. Therefore, this study aims to analyze the impact of changes in climatic factors (average air temperature and precipitation) on the technical efficiency of cotton growing farmers as its determinants in Samarkand region. Empirical analyzes were performed on the cases of 1141 cotton-growing farms using panel-based Time-Invariant Inefficiency model. According to the results of the analysis, cotton farms in the region have an average technical efficiency of 76%, which in …

Car Wash Complex – Object Of Harmful Impact On Water Resources, M. Radkevich, K. Shipilova, M. Abdukodirova, O. Pochugevski

Irrigation and Melioration

Deals with the problem of the impact of car wash complexes in the city of Tashkent on water resources. The analysis of the technological process of washing and a sociological survey of car owners and employees of car washes revealed the average amount of water used per car wash per year, as well as the amount of harmful substances entering the sewer network of the city of Tashkent. Calculations have shown that the annual water consumption only for passenger cars in Tashkent is about 4.34 million m³, and the wastewater is not properly treated. From one car wash …

Agrochemical Indicators Of New Irrigated Graph-Meadow Soils Formed On The Iii Underfladder Terrace Of Syrdarya, J.M. Kuziev

Irrigation and Melioration

Presents material on the geographical location, geomorphological and geological structure, as well as the agrochemical state of irrigated serozem-meadow soils, common in the Mirzaabad district of the Syrdarya region. According to the data obtained on the chemical analysis of soils, the studied soils are medium- and heavily loamy in texture, where particles of coarse sand predominate (0.05-0.01%). In the arable horizon of these soils, the humus content is 1.088-1.214%, total nitrogen 0.079-0.089%, total phosphorus 0.109-0.124%, and total potassium within 1.15-1.24%, and on the basis of these data, a regularity of the underlying horizon of these soils. The degree of provision …

Water Efficient Technology Of Drip Irrigation In Intensive Gardens, F.U. Juraev, G.H. Karimov

Irrigation and Melioration

The studies were carried out in 2017-2019 at the Zodabek farm on a 6 hectare garden plot with seedlings of half-tall apple trees “Golden Delicious”. Experimental research work was carried out at a groundwater level in the experimental area of 1.5-2.0 m, mineralization 1.0-1.2 g/l in alluvial, mechanical, medium sandy soils with the following irrigation options. The first option is irrigation, at the start of the second - drip irrigation; third, the use of specially designed soil pegs. The following results were obtained: in the control option, the average irrigation rate for three years was 1125.7 m3/ha, with drip irrigation …

Forecasting The Dynamics Of Cotton Yield In The Ferghana Region, V. Vakhobov, А.А. Faiziev

Irrigation and Melioration

Observations of a certain phenomenon, the nature of which changes over time, give rise to an ordered sequence, which is called a time series. In the article, using the method of statistical time series analysis, statistical pattern of time series Y₁ – average yield of cotton in Fergana region of the Republic of Uzbekistan(on materials of CSB of the Republic of Uzbekistan for 1991-2018 years). Point and interval estimates for the average cotton yield were constructed with a 95% guarantee, explicit types of trends were determined, and the yield in the region was predicted for subsequent years. Using statistical …

Hydraulic Elevator For Purification Of Water Supply Facilities Of The Reservoir, R.R. Ergashev, F. Atrikbekova, H. Khusanboeva, B.T. Kholbutaev, N.A. Babazhanov

Irrigation and Melioration

The purpose of the research is to increase the efficiency of pumping stations operation by improving the methods of uniform flow spreading in the front chamber and inlet of the pumping station and developing constructive measures to improve the hydraulic conditions for supplying the flow to the pumps. The improvement of the method of hydraulic calculation of the flow in the front chamber and the water intake chamber is given on the example of the head pumping station of the Jizzakh cascade. In the process of research, standard methods of full-scale and bench tests of pumps, methods of mathematical and …

Energy-Saving Structure Justification Powerful Tractor And Modern Agricultural Machine, A.K. Igamberdiyev, N.A. Khalikova, N.B. Razikov, O.E. Usarov

Irrigation and Melioration

Discusses the fact that machine-tractor units (MTA) from high-power tractors are often not fully used due to errors in the design and operation of units, their ability to work under certain operating conditions with maximum efficiency and minimum fuel consumption, a method of completing a machine-tractor unit from a high-power technical means is proposed, which ensures the required quality of the technological operation, maximum efficiency and minimum fuel consumption, which must be performed under certain operating conditions. To study the power balance of energy-saving units, consisting of powerful tractors and modern agricultural machinery, an analysis was carried out of a …

Traction Control Of The Friction Drive Of The Vertical Spindle, M. Shoumarova, T. Abdillaev, Sh.A. Yusupov, Ch.A. Shermatova

Irrigation and Melioration

The main indicator in assessing the quality of the work of cotton pickers is its completeness of picking cotton, among the factors that predetermine the completeness of picking a special place is occupied by the direction and magnitude of the absolute speed of the spindle tooth. Among the factors affecting the absolute speed of the tooth, the main place is occupied by the angular speed of rotation of the spindle around its own axis, which depends on the quality of functioning of the friction drive of the spindle. This drive does not always provide its required traction capacity, since due …

Research The Chopper Apparatus Of Equipment For Chopping Pressed Rough Fodders, Sh.H. Gapparov, N.A. Ashurov

Irrigation and Melioration

Livestock is one of the most important agricultural sectors in Uzbekistan and it is based on family livestock farms. On family farms, livestock animals are fed with pressed roughage, including corn stalks, alfalfa hay, barbed straw and wheat straw, mixed with concentrated feed. However, due to the lack of small choppers suitable for small farms, the compressed feed is fed to animals without chopping, as a result of which about 25-30 percent of them go to waste and there are large losses. Taking this into account, a small device was developed for chopping pressed roughage and mixing it with concentrated …

Theoretical Research On Determining The Length Of The Shovels Of A Wheel Of Centrifugal Fans, V.A. Arkhipov, D. Dzhuraev, I.Zh. Toirov, A.E. Urishev

Irrigation and Melioration

Presents the results of theoretical research by scientists, carried out scientific work to determine the length of the shovel of a centrifugal fan wheel. A technological scheme for installing a shovel on a fan wheel disk has been developed Analyzes of these works are carried out, which show that the length of the wheel shovel has a significant dependence on the parameters of the wheel (R, R₁), the angle of installation α and the radius of the arc R₃ of the shovel. An analytical dependence is derived for determining the length of the shovel of a …

Synergistic Effect Of Dissolving O2 And Wavelength On The Photo-Assisted Anodic Deposition Of Ceo2 Thin Films, Tong-Zheng Jin, Yu-Meng Yang, Sheng-Hui Fan, Guo-Ying Wei, Zhao Zhang

Journal of Electrochemistry

Cerium dioxide (CeO₂) thin films have been applied as new material in many technical fields such as solid oxide fuel cells, catalysts, UV absorbents, pharmacology, and coatings for corrosion protection of many metals and alloys. Electrodeposition is widely considered to be one of the best preparation methods for CeO₂ film. In this work, the CeO₂ films were prepared by photo-assisted anodic deposition in the bath solutions containing 0.05 mol·L-1 cerium (III) nitrate, 0.1 mol·L-1 ammonia acetate and 70% (V/V) ethanol onto 316L stainless steel (SS) surface. The synergistic effects of three monochromatic …

Degradation And Thermal Characteristics Of Lini0.8Co0.15Al0.05O2/Graphite Lithium Ion Battery After Different State Of Charge Ranges Cycling, Cun Wang, Wei-Jiang Zhang, Teng-Fei He, Bo Lei, You-Jie Shi, Yao-Dong Zheng, Wei-Lin Luo, Fang-Ming Jiang

Journal of Electrochemistry

The LiNi_0.8Co_0.15Al_0.05O₂ (NCA) cathode exhibits high energy density and large reversible capacity, which plays an essential role in the field of electric vehicles (EVs). However, low capacity retention and poor thermal stability limit its application. Few literatures are found for the capacity degradation mechanism of NCA/graphite batteries at home and abroad. The different state of charge (SOC) ranges cycle degradation behaviors of 18650-type NCA/graphite (2.4 Ah) battery were studied in this paper. The SOC ranges considered were 0% ~ 20% (low), 20% ~ 70% (medium), 70% ~ 100% (high), and 0% ~ 100% …

Preparation And Process Optimization Of Cathode Materials For Lithium-Sulfur Batteries, Kai Wu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries represent promising candidates for next-generation energy storage system due to their high energy density and low material cost. However, the industrial application of Li-S batteries remains challenges because of the shuttle effect from lithium polysulfides and the lack of facial routes for Li-S battery preparation. To solve these problems, a cathode consisting of different commercial carbon materials, namely, acetylene black (SP), Ketjen Black (KB) and carbon nanotube (CNT), with sulfur (S) is prepared separately for Li-S battery. After the process of 8-h ball milling for KB/S composite, together with the polyvinyl pyrrolidone (PVP) binder, the cathode could …

Effect Of Stereotaxically-Constructed Graphene On The Negative Electrode Performance Of Lead-Acid Batteries, Pin-Song Chen, Yi-Tao Hu, Xin-Yi Zhang, Pei-Kang Shen

Journal of Electrochemistry

With the advantages of high ratio surface area, excellent conductivity and high stability, the stereotaxically-constructed graphene (SCG) material was added to the negative active material (NAM) of lead-acid battery for improving battery performance. XRD, SEM and cyclic voltammetry tests were carried out to analyze the influence of SCG on negative active material. It is found that the conversion efficiency of lead sulfate to lead in the negative active material added with SCG material was higher than that of control group, and the particle size of the lead sulfate obtained after the discharge reaction was smaller, which are favorable factors for …

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO₂) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO₂ electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Step-By-Step Modification Of Graphite Felt Electrode For Vanadium Redox Flow Battery, Jing-Yuan Lou, Dong-Jiang You, Xue-Jing Li

Journal of Electrochemistry

As a well-known electrode material of the vanadium redox flow battery (VRFB),graphite felt electrode is the frequently-used electrode material in VRFB, and its low electrochemical activity is one of the key factors for the low power density of VRFB. In this work, we proposed a step-by-step modification method, which used KMnO₄ to oxidize graphite felt first and then placed in an activation solution to excite its reactivity, to improve the electrochemical performance of the graphite felt electrode. According to the results from cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) characterizations …

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt_0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 oC. The average diameter of the resultant Ru@Pt_0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of 3.3:1 …

Preparations And Photoelectrochemical Performances Of Rgo-Tio2 Nanotubes Arrays, Ze-Yang Zhang, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Decorating TiO₂ nanotube arrays with RGO to improve the photocatalytic activity of TiO₂ nanotube arrays has been reported. For the reported RGO-TiO₂ nanotube arrays, TiO₂ nanotube arrays were prepared by anodizing the high-purity Ti foil in an organic electrolyte for multiple-step treatments, while RGO were deposited on TiO₂ nanotube arrays by using cyclic voltammetry or other electrical reduction methods. To enhance the reduction degree and the coverage of RGO on the resultant RGO-TiO₂ nanotube arrays, in this work, the one-step electrochemical anodization in hydrofluoric acid was used to fabricate TiO₂ nanotube arrays with …

Effect Of 18-Crown-6 Additive On Chromium Electrodeposition In Ionic Liquid, Yi-Jie Wang, Dong-Fang Niu, Xin-Sheng Zhang

Journal of Electrochemistry

Trivalent chromium ion (Cr3+) is used for electrodeposition due to its low toxicity. Electrodeposition in ionic liquids can greatly solve for hydrogen evolution problem. However,as a widely used Cr(III) precursor, chromium chloride hydrate (CrCl₃·6H₂O), still contains water. In the presence of water, Cr3+ will form a complex coordination structure with water molecules ([Cr(H₂O)₆]3+), which is a stable octahedral structure and is difficult to be directly reduced to chromium metal. Therefore, coordination agents should be added into the bath. In this work, the effect of 18-Crown-6 additive on chromium electrodeposition was investigated in …

Numerical Simulation Of Nonlinear Vibrations Of Discrete Mass With Harmonic Force Perturbation, M. Yusupov, B. A. Akhmedov, Olga Karpova

Acta of Turin Polytechnic University in Tashkent

The problem of vibration of a single-mass system under the force excitation of vibration associated with a fixed base by a weightless nonlinear viscoelastic spring is considered. To take into account the rheological properties of the spring material, the Boltzmann-Volterra principle was used. Mathematical models of the problem under consideration are obtained, which are described by integro-differential equations. A solution method based on the use of quadrature formulas has been developed and a computer program has been compiled on its basis, the results obtained are presented in the form of graphs. The influence of nonlinear and rheological properties of a …

Ҳар Ҳил Материалларнинг Ейилиш Жараёнини Ўрганувчи Қурилма, Nurilla Karimovich Dadaxanov

Acta of Turin Polytechnic University in Tashkent

Амалиёт ва илмий - тадқиқот ишлари ўрганилганда, ишқаланувчи ва қўзғалувчан кесишмаларни ишдан чиқишига асосий сабаб, уларни ишқаланишдан ейилиши эканлиги кўрил. Машиналаридаги тишли узатмалар ва сирпанувчи сиртларидаги ейилишни ўрганувчи махсус қурилмалар ўрганилди. Лаборатория шароитида фойдаланиш осон бўлган ейилишни ўрганувчи қурилма тавсия қилинган.

Experimental Study Of Viscoelastic Fluid-Structure Interactions, Anita Anup Dey

Doctoral Dissertations

It is well known that when a flexible or flexibly-mounted structure is placed perpendicular to a Newtonian fluid flow, it can oscillate due to the shedding of vortices at high Reynolds numbers. Unlike Newtonian fluids, viscoelastic fluid flow can become unstable even at infinitesimal Reynolds numbers due to a purely elastic flow instability occurring at large Weissenberg numbers. This thesis focuses on exploring the mechanisms of viscoelastic fluid-structure interactions (VFSI) through experimental investigations on several different combinations of flexible and flexibly-mounted circular cylinders, micro and macro-scale cantilevered beams and viscoelastic fluids such as wormlike micelle solutions and polymer solutions. VFSI …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic

Articles

The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …

Mechanics Of The Solid-State Bonding Under Severe Thermomechanical Processes, Xue Wang

Doctoral Dissertations

Friction stir welding (FSW) has found increased applications in automotive and aerospace industries due to its advantages of solid-state bonding, no fusion and melting, and versatility in various working conditions and material combinations. The extent and quality of the solid-state bonding between workpieces in FSW is the ultimate outcome of their industrial applications. However, the relationship among processing parameters, material properties, and bonding extent and fidelity remains largely empirical, primarily because of the lack of the mechanistic understanding of (1) tool-workpiece frictional behavior, and (2) bonding formation and evolution.

In this dissertation, to study the underlying mechanism of tool-workpiece frictional …