Engineering Science and Materials Commons^™

Characterization & Extraction Of Extracellular Matrix From Porcine Adipose Tissue, Rahulkumar Kantibhia Bhoi

Open Access Theses & Dissertations

Tissue in particular extracellular matrix(ECM) plays a vital role in the growth and the function of each cell types and promote tissue regeneration and repair an impair organs. Many techniques have been developed so far to decellularized porcine tissue for the purpose to use as regenerative medicine and in tissue engineering. We aimed to optimized a method to decellularized porcine tissue while effectively eliminating xenogeneic epitopes, lipids and to retain necessary component of it intact without disrupting ECM. We have developed 2-week protocol to optimize well preserved ECM component that may keep xenogeneic biomaterial for tissue engineering and regenerative medicine. …

Methods For Producing Graphene From Petroleum By-Products, Eva M. Deemer

Open Access Theses & Dissertations

N/A

Raman Microscopic Analysis Of Internal Stress In Boron-Doped Diamond Thin Films, Emma M.A. Sundin

Open Access Theses & Dissertations

The correlations between induced stress on undoped and boron-doped diamond (BDD) thin films, sample chemical composition, and fabrication substrate are investigated in this study via confocal Raman microspectroscopic analysis. Stability of BDD films is relevant to fast-scan cyclic voltammetry, as film delamination and dislocation of BDD-coated electrodes that can occur during neurosurgical electrode implantation can negatively impact the biosensing reliability of this technique. Electrodes were fabricated by coating cylindrical tungsten rods using a custom-built chemical vapor deposition reactor. The results of the analysis reveal a direct correlation between regions of pure diamond and enhanced material stress, as well as preferential …

Material Behavior Of Window 7 Carrier Panel Tiles And Thermal Pane Fragments Recovered From The Space Shuttle Columbia, Brenda Roseanne Arellano

Open Access Theses & Dissertations

Since the end of the space shuttle program, a new generation spacecraft has been developed to transport humans back into space. NASAâ??s Orion will carry a crew beyond low-earth orbit and the exploration of Mars may be possible in the future. Space safety becomes significant with human spaceflight and the risks are high. However, aerospace materials may provide opportunities to prevent future disasters. When the space shuttle Columbia disintegrated during re-entry in 2001, thousands of debris were collected for analysis. In contrast, when the Challenger space shuttle broke apart in 1986, all shuttle debris were buried. These tragic disasters are …

Ac Susceptibility And Epr Investigations Of Superspin Dynamics In Manganese Oxide Nanoparticles, Mahesh Koirala

Open Access Theses & Dissertations

We have investigated the superspin dynamics of 5 nm and 10 nm mixed state Mn3O4 nanoparticles utilizing ac-susceptibility and electron paramagnetic resonance measurements. The out of phase component of the ac-susceptibility measurements show a magnetic anomaly below (T

Comprehensive Finite Element Modeling Of Ti-6al-4v Cellular Solids Fabricated By Electron Beam Melting, Edel Arrieta

Open Access Theses & Dissertations

Additive manufacturing permits the fabrication of cellular metals which are materials that can be highly customizable and possess multiple and extraordinary properties such as damage tolerance, metamorphic and auxetic behaviors, and high specific stiffness. This makes them the subject of interest for innovative applications. With interest in these materials for energy absorption applications, this work presents the development of nonlinear finite element models in commercial software platforms (MSC Patran/Nastran) that permit the analysis of the deformation mechanisms of these materials under compressive loads. In the development of these models, a detailed multiscale study on the different factors affecting the response …

The Interplay Between Grain Size And Austenite Stability On Deformation Behavior Of High Strength-High Ductility Combination Nanostructured Stainless Steel, Venkata Sai Ananth Challa

Open Access Theses & Dissertations

The concept of phase reversion involving severe cold deformation of metastable austenite to generate strain-induced martensite, followed by temperature-time annealing sequence, was used to obtain varying grain size from nanograined/ultrafine-grained (NG/UFG) to coarse-grained (CG) regime. This concept was used to obtain â??high strength-high ductilityâ?? combination in nano/ultrafine-grained (NG/UFG) austenitic stainless steel. Using this concept, the objective of the study is to elucidate the dependence of grain size on deformation mechanisms and deformation-induced microstructural changes. The objective was accomplished by combining depth-sensing nanoindentation experiments conducted at various strain rates, and interrupted tensile testing at various strain and post-mortem analyses of deformed …

Dft Study Of Adsorption Of Trimetallic Endohedral Fullerenes On Graphene, Nakul Nitin Karle

Open Access Theses & Dissertations

A density functional theory (DFT) study on the geometric and electronic structure of C60 and Sc3N@C80 along with their adsorption on pristine single layer graphene (SLG) is presented. C60 is found to adsorb in two nearly degenerate configurations: (i) with a pentagon facing the SLG, which is the most stable one, and (ii) with a hexagon facing the SLG in a face-to-face perfect alignment, rarely common in Ï?â??Ï? interactions, 0.06 eV higher in energy. The calculated binding energy of 0.76 eV, which includes dispersion effects, is in good agreement with previous theoretical and experimental reports. On the contrary, Sc3N@C80 adsorption …

Structural And Mechanical Characterization Of Nanocrystalline Tungsten And Tungsten-Based Alloy Thin Films For Extreme Environment Applications, Gustavo Martinez

Open Access Theses & Dissertations

Extreme environments associated with nuclear applications often results in degradation of the physical, mechanical and thermo-mechanical properties of the materials. Tungsten (W) exhibits unique physical and mechanical properties, which makes tungsten a good candidate for nuclear applications; however, intrinsic W exhibits low fracture toughness at all temperatures in addition to a high ductile to brittle transition. In the present work, nanocrystalline W, W-Y and W-Mo alloys were nanoengineered for nuclear applications. Nanocrystalline tungsten coatings with a thickness of ~1 µm were deposited onto Silicon (100) and Sapphire (C-plane) using RF and DC sputtering techniques under various growth conditions. Yttrium content …

Process-Structure-Property Relationship In Magnesium-Based Biodegradable Alloy For Biomedical Applications, Pramanshu Trivedi

Open Access Theses & Dissertations

Magnesium alloys are considered to be the next generation of biomaterials because of their ability to degrade in the physiological environment. We elucidate here the impact of multiaxial forging of Mg-2Zn-2Gd alloy on grain refinement to sub-micron regime and relate the structure to mechanical properties and biological functionality. As-cast and annealed samples were multiaxial forged (MAF) for a total number of two passes with a true strain of ~2/pass. Considering that the microstructure governs the biological response of materials, we studied the constituents of the microstructure in conjunction with the mechanical behavior. The antimicrobial behavior in a Mg-2Zn-2Gd alloy with …

Organic-Inorganic Graphite And Transition Metal Dichalcogenide Based Composites For 3d Printing, Jorge Alfredo Catalan Gonzalez

Open Access Theses & Dissertations

This project was multipronged to help fuse together topics of additive manufacturing and two-dimensional (2D) layered materials, and studying the mechanical and electrical properties of the composites produced. The composites are made from the thermoplastic polymer acting as a matrix and the graphite and 2D transition metal dichalcogenides (TMDs) serving as the filler or reinforcement. Different concentrations of TMD's were added to the matrix to study the effect of composition on the mechanical and electrical properties. To shed insights into the mechanical properties, test coupons were produced as "dog bone" structures for tensile testing using the ASTM D638 type 5 …

Mechanically Activated Magnesiothermic Combustion Synthesis Of Zirconium And Hafnium Diborides, Sergio Cordova

Open Access Theses & Dissertations

Magnetohydrodynamic (MHD) generation of electric power has the potential to increase the thermal efficiency of fossil-fuel burning power plants. Electrode materials in MHD generators must possess a high melting point, high electrical and thermal conductivities, chemical stability, and resistance to thermal shock, oxidation, and plasma sparks/arcs. Ultra-high temperature ceramics based on diborides of zirconium and hafnium (ZrB2 and HfB2) are promising materials for this application. Self-propagating high-temperature synThesis (SHS) is an attractive method for their large-scale fabrication, but SHS of ZrB2 and HfB2 from elemental Zr, Hf, and B is not economically viable because of the high cost of the …

Test Methods For The Fracture And Fatigue Crack Growth Behavior Of Hot Mix Asphalts, Eduardo Garcia

Open Access Theses & Dissertations

The service life and mechanical properties of bituminous mixtures are greatly affected by distress problems such as fracture, thermal cracking, and fatigue cracking of the asphalt layers. The fracture and fatigue crack growth (FCG) behavior of bituminous mixtures are difficult to quantify due to material-, test-, and equipment-related uncertainties. The goal of this study is to introduce a systematic fracture and fatigue crack growth testing approach for hot mix asphalts (HMAs). The objective is to experimentally evaluate the fracture resistance and fracture toughness behavior of a dense-graded HMA material at different temperatures and varying thicknesses. The effect of thickness on …

On Demand 3d Printed Hybrid Scaffolds For Tissue Engineering Applications, Ivan D. Hernandez

Open Access Theses & Dissertations

A composite 3D printed polymer scaffold with inbuilt porosity and filled with a hydrogel can provide an ideal support system for cell growth, proliferation, and vascularization. Therefore, a hybrid system of 3D printed polycaprolactone (PCL) scaffold and a hydroxyapatite-based hydrogel was developed for application in the reconstruction of bone defects, which are inherently difficult to repair without any guided therapies. In the present study, a 3D printed gyroid structure of PCL allowed the loading of a higher amount of hydrogel as compared to conventionally used 3D printed mesh structure of the same volume and strut thickness. The hydrogel was composed …

Protonic Conductors For Intermediate Temperature Fuel Cell Electrolytes: Superprotonic Csh2po4 Stabilization And In-Doped Snp2o7 Structure Study, Heber Jair Martinez Salinas

Open Access Theses & Dissertations

Proton conductor solid electrolytes CsH2PO4 and In-doped tin pyrophosphate have been investigated as candidates to fill a gap of suitable electrolytes for fuel cells at the intermediate temperature range due their unusually high conductivities between 200 and 300 °C. Unfortunately, in the case of CsH2PO4, complicated experimental conditions, like a humidified environment, or high pressure, are needed to preserve the sought high conducting phase.

In the first stage of this work, X-ray diffraction on CsH2PO 4 samples performed in air, and under normal conditions of humidity and pressure, evidence of the cubic phase of CsH2PO4 was observed during short intervals …

Comparison Of Extruder Systems For 3d Printer Filament Fabrication, Adriana Ramirez

Open Access Theses & Dissertations

Additive Manufacturing (AM) has grown in popularity over the past thirty years, due to its versatility, short design to product cycle, and capability to fabricate complex geometries, which cannot otherwise be produced. There exist several platforms that are able to print objects composed of different materials, making this technology significant in different fields such as: automotive, aerospace, medical, electronics, amongst others. Though several types of AM technologies are available, the expiration of the patents on fused deposition modeling (FDM) in 2009 has led to a widespread use of this platform in academia and home use settings.

Widespread use of FDM-type …

Structural And Electrical Characterization Of Tin Oxide Resistive Switching, Arka Talukdar

Open Access Theses & Dissertations

Resistive switching in metal oxide is a phenomenon in which the metal oxide changes its resistance upon application of electric field and thus giving two states; high resistance state (HRS) and low resistance state (LRS). Many metal oxides have been investigated however very little is known about unipolar resistive switching in SnO2 though it has shown excellent resistive switching characteristics. Defects in the material play a vital role in resistive switching of the metal oxides. In this work, the role of defects in resistive switching of SnO2 are investigated in Ti/SnO2/Au structures. Two methods were used to control the concentration …

Electronic Structure Studies On Transition Metal Containing Endohedral Fullerenes, Carbon Onions And Zinc Sulfide Cages, Shusil Bhusal

Open Access Theses & Dissertations

We present the most stable structures for VXSc3-XN@C2n (where X=1-3 and 2n=70, 76, 78 and 80) using a systematic procedure that involves all possible isomers of the host fullerene cages. Subsequently, a detailed investigation of structural and electronic properties of the lowest energy isomers is performed using density functional theory in combination with large polarized Gaussian basis sets. The search procedure developed involved structural optimizations of thousands of fullerenes and correctly identifies the experimentally observed VSc2N@C80 and V2ScN@C80 isomer as the most stable structures. The structural analysis shows that a few V-doped endohedral fullerenes do not follow the isolated pentagon …