Engineering Science and Materials Commons^™

College Of Engineering Senior Design Competition Fall 2009, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …

Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang

Journal of Electrochemistry

The electrocatalytic performance of the Ir/C catalyst as the anodic catalyst in the amperometric and electrochemical NH3 sensor was investigated.The experimental results illustrated that in the NaClO4 neutral electrolyte,the electrocatalytic performance of the Ir/C catalyst for the NH3 oxidation is related to the Ir loading in the Ir/C catalyst.Among the Ir/C catalysts with different Ir loading,the best electrocatalytic activity,stability and sensitivity were achieved by the Ir/C catalyst with 10% Ir loadings.In addition,the current densities of the NH3 oxidation at the Ir/C catalysts with the different Ir loadings were linearly proportional to the NH3 concentration.The Ir/C catalyst has a potential application …

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun

Journal of Electrochemistry

Adsorption and reduction of NO on electrode of Pt nanoparticles in acid solutions were studied by means of cyclic voltammetry(CV) and in-situ FTIR spectroscopy.The results indicated that the reduction of NO is a complicated process including the adsorption of NO on electrode surface.Two types of surface-bonded NO were determined on Pt nanoparticles.The weakly adsorbed NO was reduced between 0.6 V and-0.05 V,which yielded nitrous oxide(N2O) and ammonium(NH+4) as products;while the strongly bonded NO was reduced at more negative potentials between-0.05V and-0.15V,producing only NH4+ species.

Highly Durable Pt/Ruo_2/C Catalyst For The Cathode Of Direct Methanol Fuel Cells, Chun-Yu Du, Tao Dong, Ge-Ping Yin, Peng-Fei Shi

Journal of Electrochemistry

Instability of the carbon-supported Pt(Pt/C) catalyst at the cathode is one of the key technical challenges for the development of Direct Methanol Fuel Cells(DMFCs).In this paper,an efficient approach to enhancing the stability of the cathode catalyst was explored by designing and synthesizing a novel nanocomposite support,RuO2 coated carbon black(RuO2/C).Firstly,a wet chemical method was employed to synthesize the RuO2/C nanocomposite,from which Pt/RuO2/C catalyst was further prepared by a microwave method.The morphology and crystalline structure of the RuO2/C support and Pt/RuO2/C catalyst were then characterized by TEM and XRD.Finally,the electrochemical performance of the RuO2/C support and Pt/RuO2/C catalyst was analyzed by cyclic …

Platinum Modified With Hydrogen Molybdenum/Tungsten Bronze As Electrocatalysts For Direct Small Organic Molecule Fuel Cell, Wei-Shan Li, Li-Peng Tian, Jun-Hua Du, Hong-Liang Huang, Wei Li, Li-Xia Zhang, Hong-Yan Yang, Pan-Pan Guo, Zhi-Hui Zhou, Xing-De Xiang, Zhao Fu

Journal of Electrochemistry

There are several problems that limit the application of direct small organic fuel cell,including the use of precious platinum and the activity loss of platinum due to the intermediates poisons from the oxidation of small organic molecules.These problems have attracted wide interest and many solutions have been proposed.We have developed a new method to reduce the platinum usage and improve its activity,based on the modification of platinum with hydrogen molybdenum/tungsten bronze(HxMo(W)O3,0

Enhanced Visible Light Photoelectrochemical Performances With Nitrogen Doped Tio_2 Nanowire Arrays, Xiao-Jun Lv, Yue-Ming Li, Hao Zhang, Da Chen, Hensel Jennifer, Z Zhang Jin, Jing-Hong Li

Journal of Electrochemistry

Self-organized anodic anatase TiO2nanowire arrays doped with nitrogen have been successfully fabri-cated and their photoelectrochemical(PEC) properties have been characterized and found to be substantially im-proved compared to undoped nanowires or commercial P25 nanoparticles.Photocurrent measured with monochro-matic incident light showed that the incident photon-to-current efficiency(IPCE,%) values of nanowire arrayelectrodes with or without N-doping were obviously higher than that of commercial P25 nanoparticle electrodes,and nitrogen-doped TiO2nanowire arrays(NTNA) had noticeable absorption in the visible region.The NTNAelectrodes showed the highest photocurrent density and power conversion efficiency under 100 mW/cm2visiblelight illumination.A maximumolphotoconversion efficiency of 0.52% was achieved for the NTNA sample at anapplied potential of …

Synthesis Of Α-Mno_2 Microspheres For The Application In Supercapacitor, Liang Wang, Gui-Chang Liu, Zhi-Cong Shi

Journal of Electrochemistry

The MnO2 microspheres were prepared through the oxidation of KMnO4 and MnCO3 microspheres precursor.The microstructure and supercapacitor properties of MnO2 were characterized by XRD,SEM and CV.The results show that MnO2 was in a poorly crystalline state with α-crystallographic form,the size of microspheres typically ranged from 0.5 to 2 μm.Loading 5 mg·cm-2 MnO2 microspheres had excellent capacitance behaviors in 2 mol·L-1(NH4)2SO4 solution.The specific capacitance was 135.6 F·g-1 with the scan rate at 2 mV·s-1,and 118.8 F·g-1 with the large scan rate at 100 mV/s.Coulumbic efficiency was still above 87.8% in the 500 cycles,and the specific capacitance of the 500th cycle was …

Enhanced [Ru(Bpy)_3]~(2+)-Mediated Oxidation Of Guanine Prompted By Dhp, Bao-Lian Zhang, Wei Hong, Bao-Yi Lu, Hong Li

Journal of Electrochemistry

The effects of dihexadecyl phosphate(DHP) and multi-walled carbon nanotubes(MWNTs) on the oxidation of guanine mediated by[Ru(bpy)3]2+ on the ITO electrode have been investigated by cyclic voltammetry and differential pulse voltammetry.The results showed that [Ru(bpy)3]2+ can mediate the oxidation.In the range from 0.01 to 0.15 mmol·L-1,peak currents for guanine oxidation mediated by [Ru(bpy)3]2+ increased with the rise of DHP concentrations.On the contrary,cationic surfactant HTAC has the ability to weaken the mediated oxidation of guanine.In addition,the oxidative mechanism of guanine mediated by [Ru(bpy)3]2+ with the participation of DHP is discussed.

Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen

Journal of Electrochemistry

The Ni-Pd alloy catalysts with Pd-enriched surface were synthesized through a modified polyol process.The synthesized materials were investigated by XRD and electrochemical methods,and tested as electrocatalysts for CH3OH-tolerant oxygen reduction.The results indicated that the synthesized Ni-Pd nanoparticles possess multiple phases containing Pd-Ni alloy and pure Ni.Comparing with Pd/C,the prepared Ni-Pd/C nanoparticles exhibited better resolved voltammetric peaks between the hydrogen absorption and adsorption,and positively shifted current peaks for the reduction of Pd oxide.The prepared Ni-Pd alloys with Pd-enriched surface have significantly enhanced ORR activity and improved CH3OH tolerance as comparing with Pd/C catalysts.

Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan

Journal of Electrochemistry

The Pt nanoflower/ZnO(PtNF/ZnO) nanorod composites arrays were electrochemically prepared by controlling the hydrophobicity and the hydrophilicity of ZnO nanorods arrays.The Pt nanoflowers grew on the tip of ZnO nanorods,which maintain the vertical array of Zno nanorods with a high degree of size uniformity and high surface area.Compared with Pt nanoparticle covered ZnO nanorod arrays,which were prepared by controlling the hydrophilicities of ZnO nanorods and Pt nanoparticles,the PtNF/ZnO displayed highest electrocatalytic activities for the oxidation of methanol.

Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai

Journal of Electrochemistry

A Pd-Ni alloy film was electrodeposited on Au disc electrode at a constant potential from a weakly basic bath containing PdCl2,NiSO4 and ethylenediamine.The as-deposited film was then subjected to potential cycling in a perchloric acid solution for surface dealloying treatment.The dealloyed Pd-Ni film electrode was examined for the electrocatalytic oxidation of formic acid,and compared with the as-deposited one as well as a Pd film electrode.The FE-SEM and electrochemical measurements on the Pd-Ni films revealed that the dealloying treatment caused a surface roughening and an increase in specific surface reaction area.The ICP-AES and XPS analyses demonstrated that the preferential dissolution of …

Electrocatalytic Activities Of Au-Mmni_(3.2)Al_(0.2)Mn_(0.6)Co_(1.00) For Borohydride Oxidation, Gui-Ling Wang, Jin-Cheng Liu, Ke-Ning Sun, Dian-Xue Cao

Journal of Electrochemistry

In this work,the electrocatalytic activities of MmNi3.2Al0.2Mn0.6Co1.0,NaOH treated MmNi3.2Al0.2Mn0.6Co1.0 and Au-MmNi3.2Al0.2Mn0.6Co1.0 obtained after NaOH treatment(Mm: misch metal) for NaBH4 oxidation were reported.The electrodes were prepared by electrodeposition,their morphologies were analysized by SEM,their electrocatalytic properties were studied by the linear sweeping test.It was found that the oxidation current density of the Au-MmNi3.2Al0.2Mn0.6Co1.0 was 60 mA·cm-2,it was 3.5 times higher than that at the MmNi3.2Al0.2Mn0.6Co1.0 electrode.In addition,the oxidation current density at the Au-MmNi3.2Al0.2Mn0.6Co1.0 electrode immersed in the electrolyte solution for 10 hours was 184 mA·cm-2.

Preparation Of Polyaniline/Polyester Conductive Fabric Via In-Situ Polymerization, Fang Na, Wei Wang

Journal of Electrochemistry

The formation of PANI coating on the surface of PET fiber and fabric was obtained by in-situ polymerization method.The coating′s thickness was about 1～2 μm.Orthogonal test methodology was used to analyze the main factors of preparation of PANI / PET conductive fabric.The effects of the aniline monomer concentration,oxidant: aniline molar ratio,doping acid concentration and types,reaction time on the conductivities of the fabric were studied.The structure of the polymer were characterized by SEM,FTIR and XRD.The results indicated that there was uniform and continuous polyaniline film on the surface of polyester fabric.The contents of oxidation and reduction of polyaniline molecular chain structure …

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun

Journal of Electrochemistry

The property of an electrocatalyst depends strongly on its surface structure.The study of surface structure-catalytic functionality is the base of design and preparation of electrocatalysts of high activity,high stability and high selectivity at microstructure level.In this paper,based mainly on our results concering hydrogen and oxygen adsorption-desorption,ethylene glycol oxidation and CO2 reduction,the research progresses in tuning the surface structure and property of electrocatalysts are summarized.This paper overviews firstly the cyclic voltammetric characteristics,electrocatalytic properties of platinum single crystal planes lying on different crystallographic zones of the unit stereographic triangle of face-centered cubic(fcc) metals.Next,the innovation of electrochemical methods to control the surface structure …

Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang

Journal of Electrochemistry

A simple procedure involved the complexing of PdCl2 with sodium citrate followed by ethylene glycol reduction has been employed for the preparation of carbon-supported Pd nanoparticles(Pd/C).The XRD and TEM characterizations indicate that Pd nanoparticles with a small particle size were well-dispersed on carbon support.The mean particle sizes of the Pd/C catalysts were found to be increased from 2.7 to 5.8 nm with heat-treatments at different temperature.The mass activity of the Pd/C catalyst for formic acid electrooxidation increased with the decrease in Pd particle size.However,the specific activity increased with Pd particle size.Furthermore,the Pd/C catalyst with a particle size of ca.3.6 nm …

Research Progress Of Synergistic Effect Of Metal Oxides On Pt-Based Catalysts, Hui-Ping Yuan, Xun Guo, Xin-Ping Qiu, Wen-Tao Zhu, Li-Quan Chen

Journal of Electrochemistry

In this paper,the work of Pt-based catalysts modified by metal oxides as the anode catalysts of direct methanol fuel cell(DMFC) is reviewed.The relationship between the structure and the composition of the catalysts and the reaction mechanism,exiting problems and developing direction are discussed.

Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei

Journal of Electrochemistry

This review presents the study of Chongqing University in electrocatalysis for polymer electrolyte membrane fuel cells(PEMFCs).Based on the understanding to the performance degradation of PEMFCs' catalysts,the university has being concentrated on how to increase the activity,stability and utility of noble metal catalysts.It covers the molecular design of near-surface alloy catalysts for improvement of activity to oxygen reduction reaction(ORR) and resistance to foreign poison species,selective deposition of Pt on the so-called "three-phase interface" for a high Pt utility,and invention of anti-flooding electrode against water flooding in the catalyst layer of the membrane assemble electrode(MEA),and so on.The catalytic mechanism of electrode reactions …

Electrocatalysis Of Myoglobin-Chitosan-Au Colloid Film Modified Glass Carbon Electrode, Yu-Hua Qin, Jun Guo, Hui Xu, Li-Heng Zhou, Sheng-Tian Wang

Journal of Electrochemistry

The cyclic voltammgram of Mb/AAO/Au Colloid/GCE shows a pair of well-defined and nearly reversible peaks at about-0.20 V(vs.Ag/AgCl) in 0.1 mol/L NaAc-HAc buffer(pH = 5.4),being the characteristic peaks of the Mb heme Fe(Ⅲ) / Fe(Ⅱ)redox couples.The electron transfer between Mb and the electrode was greatly enhanced under present testing conditions.The effects of scan rate,pH and buffers concentration on the electrochemical behaviors of Mb were studied in detail.Position of the Soret absorbance band suggested that Mb in chitosan-colloidal gold hept its secondary structure similar to the native states.Oxygen was catalytically reduced by Mb in chitosan-colloidal gold films.

Indirect Electrosynthesis Of Double Aldehyde Starch Using Pb-(Bro_3~-/Br~-) As Electro-Catalytic Mediator, Chen Ni-Na, Chen Ri-Yao, Xi Zheng, Chen Xiao, Zhen Chen

Journal of Electrochemistry

In this paper,Nafion membrane was used as the separator in the electrolysis cell to indirectly electro-generating the double aldehyde starch(DAS) with BrO-3/Br-as a redox mediator and Pb as an anode.Effects of temperature,concentration of sulfuric acid and starch on the electro-oxidation of DAS were discussed.The steady state polarization curves were obtained.The experiment results showed that the current efficiency was over 50% when the electrolysis current density was 15mA/ cm2.

Waves In Inhomogeneous Solids, Arkadi Berezovski, Mihhail Berezovski, Juri Engelbrecht

Publications

The paper aims at presenting a numerical technique used in simulating the propagation of waves in inhomogeneous elastic solids. The basic governing equations are solved by means of a finite-volume scheme that is faithful, accurate, and conservative. Furthermore, this scheme is compatible with thermodynamics through the identification of the notions of numerical fluxes (a notion from numerics) and of excess quantities (a notion from irreversible thermodynamics). A selection of one-dimensional wave propagation problems is presented, the simulation of which exploits the designed numerical scheme. This selection of exemplary problems includes (i) waves in periodic media for weakly nonlinear waves with …

Synthesis And Characterization For A New Organic Cathode Material Of Lithium-Ion Batteries——Poly Sulfurized Chloranilic Acid(Psca), Kai Liu, Jian-Ming Zheng, Gui-Ming Zhong, Yong Yang

Journal of Electrochemistry

A new organic cathode material,poly sulfurized chloranilic acid(PSCA),has been successfully synthesized for lithium-ion batteries. 13C solid state NMR and FTIR results indicated that the chorine in chronailic acid was substituted by sulfur after sulfurization. The electrochemical measurements showed that the initial discharge capacity of PSCA was up to 287.6 mAh/g,and 169.9 mAh/g still remained after 100 cycles when cycled between 1.5～3.6 V at the current density of 15 mA/g.

Crystallization And Electrochemical Corrosion Behaviors Of Amorphous And Nanocrystalline Fe-Based Alloys, Xiang Li, Biao Yan, Peng Dong

Journal of Electrochemistry

In this study,amorphous Fe78Si13B9 and Fe73.5Si13.5B9Nb3Cu1 ribbons were prepared by the chill block melt-spinning process and nanocrystalline Fe73.5Si13.5B9Nb3Cu1 ribbons were obtained by annealing. The amorphous ribbons and their crystallization processes were identified by differential scanning calorimeter (DSC) and X-ray diffraction (XRD). A comparative study of the electrochemical corrosion behaviors of Fe78Si13B9 and Fe73.5Si13.5B9Nb3Cu1 amorphous and nanocrystallized alloys was performed by linear polarization method and electrochemical impedance spectroscopy (EIS) in 1mol/L NaOH solutions. The photographs of the samples after potentiodynamic polarization were observed by SEM. The influence of heat treatment on the alloys structure and corrosion resistance in 1mol/L NaOH solutions …

Capacitor Property Of Pani/Mwcnt Electrode In Li_2so_4 Solution, Wen-Bo Cong, Xiao-Shu He

Journal of Electrochemistry

Polyaniline/multi-walled carbon nanotubes (PANI/MWCNT) composites synthesized by chemical oxidation method were characterized by scanning electron microscopy (SEM),X-ray diffraction (XRD) and IR techniques. In 1mol/L Li2SO4 neutral solution,the electrochemical performance of the composites electrode was investigated by cyclic voltammetry,galvanostatic charge-discharge tests and ac impedance spectroscopy. The results showed that the composites electrode performed well in 1mol/L Li2SO4 solution,the specific capacitance reached 412F/g at 5 mA/cm2. The composites electrode possessed better capability of high current than that of PANI electrode,the specific capacitance kept at 318 F/g at 50mA/cm2 and was 77.2% of that at 5 mA/cm2,but the specific capacitance of PANI at …

A Direct Borohydride Fuel Cell With Fecopc_2-Catalysed Cathode, Jin-Fu Ma, Yan Liu, Jun-Hua Lai, Yong-Ning Liu

Journal of Electrochemistry

In this paper,a membraneless direct borohydride fuel cell was investigated. Cyclic voltammograms of FeCoPc2-modified glassy carbon electrode in the alkaline solution show that FeCoPc2 was active for oxygen reduction reaction. In addition,the steady-state polarization curve tests indicate that FeCoPc2 had better activity than FePc,CoPc or FePc+CoPc,which is due to its conjugated effect and synergistic effect of Fe and Co. Finally,a maximum power density of 110 mW/cm2 was attained,and the 25-day life test shows that the direct borohydride fuel cell had a good stability.

Synergism Of Complex Additives Of Dtab+Ktl For Zinc Corrosion Inhibition In Koh Solutions, Sheng-Zhou Lin, Zeng-Xin Cai, Gui-Sheng Wang, He-Bing Zhou, Wei-Shan Li

Journal of Electrochemistry

The electrochemical behaviors of Zn in 3mol/L KOH solution containing several kinds of inhibitors were investigated by weight-loss,electrochemical methods and SEM. The results showed that both the single ad-ditive and the mixed additives can suppress the corrosion of zinc in 3 mol/LKOH solution. And the inhibition ef-feciency of the mixed additives is higher than that of any single additive because of the synergistic effect between KTL and DTAB. The adsorption of DTAB on the surface of zinc has been enhanced in the presence of KTL.

Redox State Of Polyaniline Nanodot And Its Coulomb Staircase Effect, Jian-Zhang Zhou, Shao-Huang Weng, Zhong-Hua Lin

Journal of Electrochemistry

Polyaniline nanodot array had been fabricated in AAO template with potentiostatic method and the I~V characteristics of nanodots with different redox states were measured by conducting atomic force microscope (C-AFM) in atmosphere at room temperature. We found that only nanodots in partial oxidation state exhibit coulomb staircase in the I~V curves,while those in the full oxidation state and reduced state do not. The above phenomena were discussed preliminarily.

Electrochemical Reduction Of Nitrobenzene In Different Ionic Liquids, Jun-Li Fan, Wei-Lin Ye, Rong Wang, Li-Qun Xu, Xia-Qin Wu

Journal of Electrochemistry

Electrochemical reduction of nitrobenzene at glassy carbon electrode in different ionic liquids,such as N-methylimidazolium-p-toluene sulfonic acid ([Mim][PhSO3]) and ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF6]) have been investigated by cyclic voltammetry. Experimental results showed that only a cathodic current peak was observed in [Mim][PhSO3],which is a diffusional controlled irreversible reaction. And two pairs of current peaks were obtained in [Bmim][PF6] in the same potential range,indicating showed that the reduction products of nitrobenzene were different in different ionic liquids.

Ellipsometric Study On Colored Electroplating Of Cuprous Oxide On Ni Substrate, Xue-Song Feng, Jing-Lei Lei, Ai-Xiang Chen, Wan-Shan Yin, Ling-Jie Li, Sha Zheng, Hui Zhao, Shao-Yan Pan

Journal of Electrochemistry

The colored Cu2O coating was electroplated on Ni substrate to meet the decorative requirements. Results of X-ray photoelectron spectroscopy (XPS) indicate the coating consisting of Cu2O. Images of scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) show that the Cu2O coating is smooth and uniform,and covers the Ni substrate wholly. Ellipsomtric measurements for Cu2O coatings with various electroplating time were carried out. Using a 4-layer model of "Air-Cu2O layer-interphase-Ni" ,the interphase was modeled with the graded effective medium approximation (EMA),the ellipsomtric data were deconvoluted and the Cu2O coatings thickness of Cu2O was obtained. Results reveal that the Cu2O coating …

Silicon Silver Composite Materials For Li-Ion Batteries, Lian-Bang Wang, Xiao-Bo Dai, Xin-Yan Zhu, Xin-Biao Mao, Chun-An Ma

Journal of Electrochemistry

Si-Ag composite materials were prepared by mechanical alloying method. The morphology and composition of SiAg composites were investigated by SEM and XRD. The electrochemical properties of the composites were determined by charge-discharge tests and cyclic voltammetry. The composite composed of Si∶Ag with an atomic ratio of 1∶1 (sample 1#) showed good cyclic stability and charge-discharge reversibility. The reversible capacity of the composite (sample 1#) was remained over 300 mAh·g-1 after 50 cycles. Experimental results showed that controlling the potential range of charge-discharge processes could enhance the cyclic performance of alloy materials.

Electrocatalytic Oxidation Of Glucose On Cnt/Nanocrystlline Tio_2-Pt Complex Film Electrode In Ionic Liquids, Dao-Bao Chu, Long-Wu Zha, Shu-Xi Wang, Jian Wang, Ying Xiao, Yuan-Yuan Hou, Jian-Guo He, Xue-Jiao Zhang

Journal of Electrochemistry

Using ionic liquid [EMI]BF4 as the electrolyte,the electrocatalytic oxidation of glucose on carbon nanotubes/nanocrystlline TiO2 film loaded on Pt (CNT/nanoTiO2-Pt) complex film electrode was investigated by cyclic voltammetry. The results found that the CNT/nanoTiO2-Pt complex electrode had high catalytic activity to the electrochemical oxidation of glucose in ionic liquids and the oxidation potential was -0.46 V. The best effect of glucose oxidation was obtained with the volume ratio of ionic liquid to water being 3∶1. The process of electrodic reaction process was concentration polarization controlled.