Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 12 of 12

Full-Text Articles in Engineering Science and Materials

Nickel Based Rtd Fabricated Via Additive Screen Printing Process For Flexible Electronics, Vikram S. Turkani, Dinesh Maddipatla, Binu B. Narakathu, Bilge N. Altay, Paul D. Fleming, Bradley J. Bazuin, Massood Atashbar Feb 2019

Nickel Based Rtd Fabricated Via Additive Screen Printing Process For Flexible Electronics, Vikram S. Turkani, Dinesh Maddipatla, Binu B. Narakathu, Bilge N. Altay, Paul D. Fleming, Bradley J. Bazuin, Massood Atashbar

Bilge Nazli Altay

A novel nickel (Ni) based resistance temperature detector (RTD) was successfully developed for temperature monitoring applications. The RTD was fabricated by depositing Ni ink on a flexible polyimide substrate using the screen printing process. Thermogravimetric analysis was performed to study the thermal behavior of the Ni ink and it was observed that the Ni ink can withstand up to 200°C before decomposition of the binder in the ink system. Scanning electron microscopy and white light interferometry were used to analyze the surface morphology of the printed Ni. X-ray diffractometry was used to obtain structural information, phase and crystallite size ...


Investigation Of The Evolution Of Hydrophobicity And Wettability Of Paper In Multi-Color Printing Process, C Aydemir, A Karademir, S Imamoglu, Bilge N. Altay, Paul D. Fleming, D Tutak Dec 2018

Investigation Of The Evolution Of Hydrophobicity And Wettability Of Paper In Multi-Color Printing Process, C Aydemir, A Karademir, S Imamoglu, Bilge N. Altay, Paul D. Fleming, D Tutak

Bilge Nazli Altay

One of the keys to improving print quality is to experimentally characterize the paper surface, structure and printability to obtain quality control mechanisms. In multi-color prints, determining the differences in the acceptance of the next color ink by the surface of the paper or the ink film that was previously printed is important for print quality. The criteria, such as ink setting, adhesion, color, gloss and density, in the printing process, depend on the wettability and absorbency of the paper. The surface structure of the paper is the most important factor in determining the hydrophobic properties. In this study, wetting ...


Impact Of Substrate And Process On The Electrical Performance Of Screen-Printed Nickel Electrodes: Fundamental Mechanism Of Ink Film Roughness, Bilge N. Altay, Jerome Jourdan, Vikram S. Turkani, Hervé Dietsch, Dinesh Maddipatla, Alexandra Pekarovicova, Paul D. Fleming, Massood Atashbar Nov 2018

Impact Of Substrate And Process On The Electrical Performance Of Screen-Printed Nickel Electrodes: Fundamental Mechanism Of Ink Film Roughness, Bilge N. Altay, Jerome Jourdan, Vikram S. Turkani, Hervé Dietsch, Dinesh Maddipatla, Alexandra Pekarovicova, Paul D. Fleming, Massood Atashbar

Bilge Nazli Altay

In recent years, traditional printing methods have been integrated to print flexible electronic devices and circuits. Since process requirements for electronics diff er from those for graphic printing, the fundamentals require rediscovery mainly to optimize manufacturing techniques and to find cost reduction methods without compromising functional performance. In addition, alternative inks need to be formulated to increase the variety of functional inks and to pioneer new product developments. In this report, we investigate a thermoplastic-based nickel ink prototype to print electrodes using a screen-printing process. Process fundamentals are explored, and cost reduction methods are addressed by studying ...


Global Packaging Trends, Bekir Keskin, Bilge N. Altay, Merve Akyol, Guven Meral, Olgun Uyar, Paul D. Fleming Oct 2018

Global Packaging Trends, Bekir Keskin, Bilge N. Altay, Merve Akyol, Guven Meral, Olgun Uyar, Paul D. Fleming

Bilge Nazli Altay

The packaging sector is one of the massive traditional fields in the printing industry. The rapid developments in technology and environmental regulations have been affecting the expectations from packaging. User demands and the concerns to protect the environment are the two main factors that now demanding change in material properties. The choice used to depend on the physical and chemical requirements of the products, although today’s global mind set on the concepts such as biodegradability, recyclability, reusability, sustainability and carbon footprint reduction are becoming the reason to tailor packaging properties. In general, the choices have been switching from petroleum ...


Nickel Based Printed Resistance Temperature Detector On Flexible Polyimide Substrate, Vikram S. Turkani, Binu B. Narakatku, Dinesh Maddipatla, Bilge N. Altay, Paul D. Fleming, Bradley J. Bazuin, Massood Atashbar Dec 2017

Nickel Based Printed Resistance Temperature Detector On Flexible Polyimide Substrate, Vikram S. Turkani, Binu B. Narakatku, Dinesh Maddipatla, Bilge N. Altay, Paul D. Fleming, Bradley J. Bazuin, Massood Atashbar

Bilge Nazli Altay

A fully printed nickel (Ni) based resistance temperature detector (RTD) was successfully developed for temperature sensing applications in the automobile, agricultural and consumer electronic industries. The RTD was fabricated by
depositing nickel (Ni) ink on a flexible polyimide (PI) substrate using screen printing process. The capability of the printed RTD was demonstrated by measuring its resistive response for temperatures varying from -60 °C to 180 °C, in steps of 20 °C and its sensing characteristics such as linearity, sensitivity and repeatability were analyzed. The printed RTD demonstrated a linear response with resistive changes as high as 109% at 180 °C ...


Smart Ink For Flexo - 2, Bilge N. Altay Dec 2015

Smart Ink For Flexo - 2, Bilge N. Altay

Bilge Nazli Altay

No abstract provided.


Thermal Vs. Photonic Sintering Of Nano Silver Based Conductive Inks, Bilge N. Altay, Paul D. Fleming May 2015

Thermal Vs. Photonic Sintering Of Nano Silver Based Conductive Inks, Bilge N. Altay, Paul D. Fleming

Bilge Nazli Altay

Conductive ink formulations with different electrical properties and their sintering methods after printing are an emerging area of interest. In this work, different line width and resolutions were printed on a a flexible PET substrate using a nano silver based conductive ink with gravure printing. Then printed traces were sintered with two different sintering methods and the results were compared.


Determination Of Color Stability In Electrophotographic Digital Printing Systems, S. Kocabey, T. Sahinbaskan, Bilge N. Altay Dec 2010

Determination Of Color Stability In Electrophotographic Digital Printing Systems, S. Kocabey, T. Sahinbaskan, Bilge N. Altay

Bilge Nazli Altay

As a result of rapid technological advances in printing industry, digital printing systems now holds an important place. Looking at these systems in general, two technologies come forward. First one is continuous inkjet and the second is electrophotographic printing system. Digital printing systems have some advantages as well as some disadvantages. One of them is to provide color stability and reliability. A latent image is generated on the drum by electric charge in electrophotographic printing system. Toner is brought onto the latent image thanks to the electric charge on the latent image. The toner on the drum is collected on ...


Analyzing The Relation Between Optical Properties Of Substrates Used For Electrophotographic Printing System And Their Color Gamut Reproduction, Bilge N. Altay, T. Sahinbaskan Dec 2010

Analyzing The Relation Between Optical Properties Of Substrates Used For Electrophotographic Printing System And Their Color Gamut Reproduction, Bilge N. Altay, T. Sahinbaskan

Bilge Nazli Altay

Digital printing is a commonly used for small and medium run length printing. It seems to be an alternative to traditional printing systems as its print speed and quality improve each day. Printing can be done by digital printing machines using many different substrates and toners. Different color and quality results can be obtained depending on the substrates used in digital printing systems as well as in other printing systems. Substrates give different results for density and Lab values depending on their surface characteristics even if they print at the same printing conditions. Electrophotographic printing technology is one of the ...


Digital Printing Of Inkjet And Toner Technologies Related To Color Gamut And Reproduction Characteristics, Bilge N. Altay Feb 2010

Digital Printing Of Inkjet And Toner Technologies Related To Color Gamut And Reproduction Characteristics, Bilge N. Altay

Bilge Nazli Altay

No abstract provided.


Non-Process And Chemical Free Offset Printing Plate, Bilge N. Altay, C. Koroglu, O. Yaman, C. Sahin Feb 2009

Non-Process And Chemical Free Offset Printing Plate, Bilge N. Altay, C. Koroglu, O. Yaman, C. Sahin

Bilge Nazli Altay

No abstract provided.


30 Adet Pantone Rengin Ink Formulation Programi Kullanilarak Hazirlanmasi, Bilge N. Altay, Nazli Burcu Taklak Dec 2005

30 Adet Pantone Rengin Ink Formulation Programi Kullanilarak Hazirlanmasi, Bilge N. Altay, Nazli Burcu Taklak

Bilge Nazli Altay

Ink Formulation programı kullanılarak formülasyon bileşenleri bulunmak istenen renk, hedef renk olarak tanımlanır ve programa girişi spektral fotometre ile ölçülerek yapılır. Ink Formulation programı tanımlanan hedef rengin üretimi için eldeki mevcut mürekkep ve artık mürekkepleri karıştırarak, hangi mürekkepten ne kadar konulacağını gösterecek şekilde bileşenlerin formülasyon yüzdelerini hesaplayan bir masaüstü yayıncılık programıdır. Bu çalışmanın 1. bölümünde program hakkında bilgi; bölüm 2’de yazılımın kurulumu hakkında bilgi; bölüm 3’de ColorNet yazılımı hakkında bilgi; bölüm 4’de programının yapısı ve görevleri hakkında bilgi; bölüm 5’de programı başlatma hakkında bilgi; bölüm 6’da seçilen bir hedef rengin hesaplanması hakkında bilgi; bölüm 7 ...