Electrical and Electronics Commons^™

Plc Course Development, Leonard Hernandez, Jacqueline Grace Radding

Electrical Engineering

The goal of this project is to design and construct the first lab experiment for the newly developed EE435 laboratory course. The experiment entails PLC programming to automate LED lighting in a simulated building. Starting with why PLCs are used, how to use the interface of EcoStruxure Control Expert V15.0 and practice using logic to control the dimming of a Light Emitting Diode (LED) to sustain a certain number of lumens consistent in a zone. Through the lab manual developed in this project, students will gain experience of creating logic designs using Function Block Diagram (FBD) and learn the layout …

Energy Efficiency And Fault Tolerance In Open Ran And Future Internet, Saish Urumkar, Byrav Ramamurthy, Sachin Sharma

Conference papers

Open Radio Access Networks (Open RAN) repre- sent a promising technological advancement within the realm of the future internet. Research efforts are currently directed towards enhancing energy efficiency and fault tolerance, which are critical aspects for both Open RAN and the future internet landscape. In the context of energy saving in Open RAN, there exists a spectrum of methods for achieving energy efficiency. These methods include the toggling of on/off states for different hardware resources such as base station units, distributed units, and radio units. Conversely, for enhancing fault tolerance in Open RAN, Software-Defined Networking (SDN) and OpenFlow based techniques …

Improving Energy Efficiency In Open Ran Through Dynamic Cpu Scheduling, Saish Urumkar, Byrav Ramamurthy, Sachin Sharma

Conference papers

Open RAN is a promising cellular technology that is currently undergoing extensive research for future wireless radio access networks. Achieving optimal energy efficiency in Open RAN poses a significant challenge. This paper introduces a CPU scheduling algorithm that specifically targets this chal- lenge by optimizing energy consumption at the base station while maintaining optimal performance levels. With the goal of minimizing energy consumption, the proposed algorithm dynamically adjusts the CPU core states, seamlessly switching between active and sleep modes based on the load conditions. To evaluate the algorithm’s effectiveness in terms of energy saving and performance, experimental testing is conducted …

A Modular Framework For Surface-Embedded Actuation And Optical Sensing In Soft Robots., Paul Bupe Jr

Electronic Theses and Dissertations

This dissertation explores the development and integration of modular technologies in soft robotics, with a focus on the OptiGap sensor system. OptiGap serves as a simple, flexible, cost-effective solution for real-time sensing of bending and deformation, validated through simulation and experimentation. Working as part of an emerging category of soft robotics called Soft, Curved, Reconfigurable, Anisotropic Mechanisms, or SCRAMs, this research also introduces the Thermally-Activated SCRAM Limb (TASL) technology, which employs shape-memory alloy (SMA) wire embedded in curved sheets for surface actuation and served as the initial inspiration for OptiGap. In addition, the EneGate system is presented as a complementary …

Project Thetis: A Low-Cost, Low-Profile Inertial Data Logger, Braidan Duffy

Theses and Dissertations

This thesis details the design, testing, calibration, and verification of a nine degree of freedom inertial measurement data logger for use with floating bodies. The instrument was conceived to address limitations of equipment used in classes within the Ocean Engineering department at Florida Institute of Technology. By meeting with several stakeholders and end users, a series of stakeholder requirements, capabilities, and component-level requirements were de- veloped that informed the design constraints. There were several hardware iterations of the board, culminating in Revision F5 which was extensively tested and proven. The design was inspected after testing concluded to determine which capabilities …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Crazyflie 2.1 Quadcopter Nonlinear System Identification, Nhat V. Nguyen, Hope Storro, John Plimpton

2023 Symposium

Quadcopters (quad) are used widely in many industries with crucial applications such as infrastructure inspection or package delivery. The Crazyflie 2.1 quad from Bitcraze provides an excellent platform for research and development. In this project, our goal is to perform system identification on the Crazyflie to propose a complete model. A gray box method is explored, which includes leveraging the parameters that are already known, to develop a set of equations. Through theory, simulations, and measurements, a complete quadcopter model is developed.

A Low Cost Iot-Based Arabic License Plate Recognition Model For Smart Parking Systems, Mohammad Mahmoud Abdellatif, Noura Hany Elshabasy, Ahmed Emam Elashmawy, Mohamed Abdelraheem

Electrical Engineering

License Plate Recognition is one of the significant enablers that can be utilized in wide range of applications in ITS and smart cities. The proposed design relies on three image processing stages to achieve license plate identification with high accuracy which are pre-processing, segmentation, and character recognition. The canny edge detection method with various thresholds, contour detection, and masking techniques are used to locate the car edges and license plate. In the experiment presented in this paper, 200 images were used to identify Egyptian car plates. The model successfully identified Arabic license plates with 93% accuracy. A prototype is implemented …

Instrumented Control Column For Optionally Piloted Aircraft, Andrew J. Klein

Electrical Engineering

Natilus, an aerospace company that is rapid-prototyping optionally piloted aircraft (OPA) for the shipping industry, needs a system that retrieves control column position data in order to manipulate flight simulator parameters in software. At present, a universally compatible system for all aircraft does not exist. Typically, established aerospace companies will sink significant time and money into developing proprietary systems for control column data retrieval as every aircraft is unique in its layout and linkage design. However, as a startup developing their first aircraft, Natilus does not have the privilege of modifying an existing sensor system to work with their HIL …

Using An Embedded System For A Quality Cup Of Coffee, Evan Powers, Joshua Stermer, Tsion Yohannes

2023 Symposium

Many coffee lovers spend up to $5 on a cup of coffee everyday. To save money one could make them at home, but a quality machine with PIDs start at $1000. Using an embedded system one could spend less than $50 and a few hours implement PIDs into an existing $400 machine that will last a lifetime. microcontroller. Learning C language combined with hardware implementation applied to cheap and simple everyday objects can improve everyday quality of life and save money.

This is challenging because we have to incorporate the additional circuitry into a pre established circuit with limited space, …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Creating A Power System For A Robot, Nolan Hays

Scholars Week

I will be describing the process of creating the power system for the robot that will be competing in the 2023 IEEE Hardware Competition.

Pvpbc: Privacy- And Verifiability-Preserving E-Voting Based On Permissioned Blockchain, Muntadher Sallal, Ruairí De Fréin, Ali Malik

Articles

Privacy and verifiability are crucial security requirements in e-voting systems and combining them is considered to be a challenge given that they seem to be contradictory. On one hand, privacy means that cast votes cannot be traced to the corresponding voters. On the other hand, linkability of voters and their votes is a requirement of verifiability which has the consequence that a voter is able to check their vote in the election result. These two contradictory features can be addressed by adopting privacy-preserving cryptographic primitives, which at the same time as achieving privacy, achieve verifiability. Many end-to-end schemes that support …

Wifi Sensing At The Edge Towards Scalable On-Device Wireless Sensing Systems, Steven M. Hernandez

Theses and Dissertations

WiFi sensing offers a powerful method for tracking physical activities using the radio-frequency signals already found throughout our homes and offices. This novel sensing modality offers continuous and non-intrusive activity tracking since sensing can be performed (i) without requiring wearable sensors, (ii) outside the line-of-sight, and even (iii) through the wall. Furthermore, WiFi has become a ubiquitous technology in our computers, our smartphones, and even in low-cost Internet of Things devices. In this work, we consider how the ubiquity of these low-cost WiFi devices offer an unparalleled opportunity for improving the scalability of wireless sensing systems. Thus far, WiFi sensing …

Wireless Kick Pedal, Jacob Wise, Ryan Kinyo, Bradley Toth, Ian Zanath

Williams Honors College, Honors Research Projects

The goal of the project is to build a wireless kick pedal that allows accessibility to drummers that have leg or foot disabilities and add versatility to multi-instrumentalists looking to add percussion while playing another instrument. The proposed pedal is designed in two main parts, a wearable band that tracks the player’s movement, and a hammer mechanism that receives actuation commands from the wearable band to move the hammer and deliver a drumbeat. The band is designed to be worn on several parts of the body, including the ankle, knee, thigh, or even the arm depending on the user’s situation. …

Exploiting Multimode Antennas For Mimo And Aoa Estimation In Size-Constrained Iot Devices, Abel Zandamela, Alessandro Chiumento Alessandro Chiumento, Alessandro Chiumento, Nicola Marchetti, Max Ammann, Adam Narbudowicz

Articles

This work proposes compact multimode Multiple-Input–Multiple-Output (MIMO) antennas for Angle of Arrival (AoA) estimation in miniaturized Internet of Things (IoT) systems. The method excites different orthogonal radiating modes (TM 21 , TM 02 , and TM 31 modes) for beamforming capabilities, and the AoA performance is investigated using the Multiple Signal Classification (MUSIC) algorithm, executed using numerical and experimental data. The technique is tested at 2.238GHz , while using an antenna diameter

Wireless Environmental Weather Monitor, Joel Christie-Millett, Nathan Schroeder, Sylvester Wilson, Matthew Szijarto

Williams Honors College, Honors Research Projects

The goal of this senior design/honors project is to create a device that monitors environmental conditions in order to detect a wildfire. This device should notify a user of the status of the environment. The device should also last for 6 months without any human interaction. My role on the team is to design the power supply system that maximizes efficiency and uses renewable energy.

Whiteboard Drawing Device, Stefan Ilic, Andrew Adams, Vaughn Richards, James Medved

Williams Honors College, Honors Research Projects

Whiteboards have become a staple in many classrooms, especially in the context of STEM courses. However, when it comes to teaching complex topics, it can be difficult or impractical to provide accurate drawings and visualizations by hand, and in extreme cases may lead to misinterpretation of a particular topic. To fix this issue, the Whiteboard Drawing Device allows users to draw preset shapes to a whiteboard automatically, both quickly and accurately. Using either a smartphone application or a set of onboard controls, the device allows users to automatically draw straight lines, rectangles, triangles, sinusoidal waves, and circles on the whiteboard. …

Predicting Jamming Systems Frequency Hopping Sequences Using Artificial Neural Networks, Charles Strickland

Electronic Theses and Dissertations

This work proposes a neural network architecture that was designed to predict and reverse engineer frequency hopping jamming systems. The neural network was initially optimized for use with a 12th order linear shift feedback register maximum length sequence utilizing a minimal polynomial as the characteristic polynomial. This neural network was then scaled to accommodate 7 different sequences, of orders 6 through 12. The neural network was trained for these sequences using training data that is 10 times the length of the sequence. This information is then used to generate a hopping sequence that reduces the jamming interference to 0 with …

Assessing The Performance Of A Particle Swarm Optimization Mobility Algorithm In A Hybrid Wi-Fi/Lora Flying Ad Hoc Network, William David Paredes

UNF Graduate Theses and Dissertations

Research on Flying Ad-Hoc Networks (FANETs) has increased due to the availability of Unmanned Aerial Vehicles (UAVs) and the electronic components that control and connect them. Many applications, such as 3D mapping, construction inspection, or emergency response operations could benefit from an application and adaptation of swarm intelligence-based deployments of multiple UAVs. Such groups of cooperating UAVs, through the use of local rules, could be seen as network nodes establishing an ad-hoc network for communication purposes.

One FANET application is to provide communication coverage over an area where communication infrastructure is unavailable. A crucial part of a FANET implementation is …

A Design Flow For Additively Manufactured 3d Metasurface Antennas​, Justin Parkhurst

Doctoral Dissertations and Master's Theses

Metasurface (MTS) antennas are complex arrays consisting of hundreds or thousands of individual elements that each exert their own influence on the performance of the antenna. Due to this, the process of designing and developing a MTS antenna can be intensive in terms of both the time to understand the how these antennas operate and time running calculations that achieve optimal performance. Through the use of automation for geometry creation in ANSYS HFSS, the work involved in making a MTS antenna can be greatly simplified. The overall objective of this thesis is to reduce the burden of constructing a MTS …

Studying Routing Issues In Vanets Using Ns-3 And Sumo, Mohammad Mahmoud Abdellatif, Omar E. Aly

Electrical Engineering

ehicular Ad-hoc Networks VANETs are normally sparse, highly dense, and highly mobile with many different and ever-changing topologies. These characteristics impose a challenge on finding a routing algorithm that fits the requirements of such network. The aim of this work is to study the performance issues of VANETs under different scenarios using realistic mobility models. In this paper, a comparative study is done among Ad-hoc On- Demand Distance Vector (AODV), Optimized Link State Routing (OLSR) and position-based routing protocols, namely Greedy Perimeter stateless routing (GPSR), and Max duration Min angle GPSR (MMGPSR). The comparison is done using key quality of …

Reduced Fuel Emissions Through Connected Vehicles And Truck Platooning, Paul D. Brummitt

Electronic Theses and Dissertations

Vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication enable the sharing, in real time, of vehicular locations and speeds with other vehicles, traffic signals, and traffic control centers. This shared information can help traffic to better traverse intersections, road segments, and congested neighborhoods, thereby reducing travel times, increasing driver safety, generating data for traffic planning, and reducing vehicular pollution. This study, which focuses on vehicular pollution, used an analysis of data from NREL, BTS, and the EPA to determine that the widespread use of V2V-based truck platooning—the convoying of trucks in close proximity to one another so as to reduce air drag …

Load Modeling And Evaluation Of Leds For Hardware Test Bed Application, Jillian M. Ruff

Masters Theses

The lighting industry was revolutionized with the emergence of LED lighting. Over the last 15 years, LED lighting device sales and utilization have grown immensely. The growth and popularity of LEDs is due to improved operation of the device when compared to previous lighting technologies. Efficient performance of the device is critical due to the growth of global energy consumption.

As nonrenewable generation fuel is finite, utilities have begun the transition to renewable energy generation. Generation and distribution systems become inherently complex to comprehend and maintain with incorporation of emerging supply and load technologies. With the unprecedented growth of LED …

An Evaluation Of Wi-Fi 802.11b Backscatter, Anthony Chen

All Theses

Internet of Things (IoT) devices are in need of low-power communications systems with longevity and reliability. With the use of backscatter technology, IoT devices can communicate at the cost of almost no power and can last for up to a decade. Furthermore, backscatter technology is compatible with everyday wireless signals such as Wi-Fi and Bluetooth, allowing for easy communication without specific hardware constraints. This thesis aims to evaluate a Wi-Fi backscatter system and analyze its ease in triggering off of such ambient signals and sources. The system will utilize Wi-Fi 802.11b as a backscatter source to trigger the backscatter system …

Load-Adjusted Prediction For Proactive Resource Management And Video Server Demand Profiling, Obinna Izima, Ruairí De Fréin

Articles

To lower costs associated with providing cloud resources, a network manager would like to estimate how busy the servers will be in the near future. This is a necessary input in deciding whether to scale up or down computing requirements. We formulate the problem of estimating cloud computational requirements as an integrated framework comprising of a learning and an action stage. In the learning stage, we use Machine Learning (ML) models to predict the video Quality of Delivery (QoD) metric for cloud-hosted servers and use the knowledge gained from the process to make resource management decisions during the action stage. …

A Stochastic Spectrum Trading And Resource Allocation Framework For Opportunistic Dynamic Spectrum Access Networks, Mohamed Abdelraheem, Mohammad Mahmoud Abdellatif

Electrical Engineering

In this article, the spectrum trading problem between primary users and secondary networks is investigated. The secondary network requests multiple channels with the targeted availability to satisfy its users’ demands. Due to the uncertainty about the channels availability, stochastic optimization techniques are adopted to find the optimal set of channels for each secondary network for the lowest cost. Two different constraints on the secondary demand are defined. The first one is when the throughput has to be fully satisfied for a certain percentage of time, and the second one is when the expected value of the throughput has to exceed …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Hvac Hardware Modeling Using Programmable Automatic Controller, Panthil Ketan Patel, Lumanti Tuladhar

Electrical Engineering

The primary purpose of this project is to use the donated programmable logic controllers (PLC) from Schneider Electric to develop experiments for a future lab class at Cal Poly. Our goal as the first group working on this project is to develop an experiment where the PLC can control the HVAC system based on temperature and humidity sensors and user inputs to maintain a desired consistent temperature. The PLC will be controlled using Unity Pro XLS/Control Expert software for simulations. The overall purpose of the experiments will be to demonstrate the potential of the PLC to minimize manual intervention while …