Electrical and Computer Engineering Commons^™

Bloom Filters Optimized Wu-Manber For Intrusion Detection, Monther Aldwairi, Koloud Al-Khamaiseh, Fatima Alharbi, Babar Shah

Journal of Digital Forensics, Security and Law

With increasing number and severity of attacks, monitoring ingress and egress network traffic is becoming essential everyday task. Intrusion detection systems are the main tools for capturing and searching network traffic for potential harm. Signature-based intrusion detection systems are the most widely used, and they simply use a pattern matching algorithms to locate attack signatures in intercepted network traffic. Pattern matching algorithms are very expensive in terms of running time and memory usage, leaving intrusion detection systems unable to detect attacks in real-time. We propose a Bloom filters optimized Wu-Manber pattern matching algorithm to speed up intrusion detection. The Bloom …

The Impact Of Md5 File Hash Collisions On Digital Forensic Imaging, Gary C. Kessler

Journal of Digital Forensics, Security and Law

The Message Digest 5 (MD5) hash is commonly used as for integrity verification in the forensic imaging process. The ability to force MD5 hash collisions has been a reality for more than a decade, although there is a general consensus that hash collisions are of minimal impact to the practice of computer forensics. This paper describes an experiment to determine the results of imaging two disks that are identical except for one file, the two versions of which have different content but otherwise occupy the same byte positions on the disk, are the same size, and have the same hash …

Leveraging The Windows Amcache.Hve File In Forensic Investigations, Bhupendra Singh, Upasna Singh

Journal of Digital Forensics, Security and Law

The Amcache.hve is a registry hive file that is created by Microsoft® Windows® to store the information related to execution of programs. This paper highlights the evidential potential of Amcache.hve file and its application in the area of user activity analysis. The study uncovers numerous artifacts retained in Amcache.hve file when a user performs certain actions such as running host-based applications, installation of new applications, or running portable applications from external devices. The results of experiments demonstrate that Amcache.hve file stores intriguing artifacts related to applications such as timestamps of creation and last modification of any application; name, description, publisher …

The 2016 Analysis Of Information Remaining On Computer Hard Disks Offered For Sale On The Second Hand Market In The Uae, Thomas Martin, Andy Jones, Mohammed Alzaabi

Journal of Digital Forensics, Security and Law

This research describes our survey of data remaining on computer hard disks sold on the second hand market in the United Arab Emirates (UAE). This is a repetition of the first survey conducted in 2012 (Jones, Martin, & Alzaabi, 2012). Similar studies have been carried over the last ten years in the United Kingdom, Australia, USA, Germany and France: (Jones, Mee, Meyler, & Gooch, 2005), (Jones, Valli, Sutherland, & Thomas, 2006), (Jones, Valli, Dardick, & Sutherland, 2008), (Jones, Valli, Dardick, & Sutherland, 2009). This research was undertaken to gain insight into the volumes of data found on second-hand disks purchased …

A New Distributed Chinese Wall Security Policy Model, Saad Fehis, Omar Nouali, Mohand-Tahar Kechadi

Journal of Digital Forensics, Security and Law

The application of the Chinese wall security policy model (CWSPM) to control the information flows between two or more competing and/or conflicting companies in cloud computing (Multi-tenancy) or in the social network, is a very interesting solution. The main goal of the Chinese Wall Security Policy is to build a wall between the datasets of competing companies, and among the system subjects. This is done by the applying to the subjects mandatory rules, in order to control the information flow caused between them. This problem is one of the hottest topics in the area of cloud computing (as a distributed …

The Impact Of Sha-1 File Hash Collisions On Digital Forensic Imaging: A Follow-Up Experiment, Gary C. Kessler

Journal of Digital Forensics, Security and Law

A previous paper described an experiment showing that Message Digest 5 (MD5) hash collisions of files have no impact on integrity verification in the forensic imaging process. This paper describes a similar experiment applied when two files have a Secure Hash Algorithm (SHA-1) collision.

A Survey Of Social Network Forensics, Umit Karabiyik, Muhammed Abdullah Canbaz, Ahmet Aksoy, Tayfun Tuna, Esra Akbas, Bilal Gonen, Ramazan S. Aygun

Journal of Digital Forensics, Security and Law

Social networks in any form, specifically online social networks (OSNs), are becoming a part of our everyday life in this new millennium especially with the advanced and simple communication technologies through easily accessible devices such as smartphones and tablets. The data generated through the use of these technologies need to be analyzed for forensic purposes when criminal and terrorist activities are involved. In order to deal with the forensic implications of social networks, current research on both digital forensics and social networks need to be incorporated and understood. This will help digital forensics investigators to predict, detect and even prevent …

Nuclear Power: Black Sky Liability Or Black Sky Asset?, Sherrell R. Greene

International Journal of Nuclear Security

Ready access to abundant electricity is a key enabler of modern life. During the past decade the vulnerability of Critical Infrastructure sectors in the U.S. to a variety of natural hazards and man-made threats has become increasingly apparent. The electrical infrastructure (the “Grid”) is the foundation for all other critical civil infrastructures upon which our society depends. Therefore, protection of the Grid is an energy security, homeland security, and national security issue of highest importance. Geomagnetic disturbances (GMD) induced by solar coronal mass ejections (CMEs), electromagnetic pulse (EMP) attacks, and cyber attacks are three events having the potential to plunge …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Smart Connector Helmet & Automatic Gps Inovasi Alat Bantu Komunikasi Antar Pengemudi Dan Penunjuk Arah Berbasis Internet, Nur Hasanah

Elinvo (Electronics, Informatics, and Vocational Education)

Perancangan smart connector helm dan automatic GPS bertujuan untuk membantu komunikasi antar pengemudi dan sebagai penunjuk arah yang berbasis internet. Alat bantu komunikasi ini terpasang di helm dan terkoneksi dengan smartphone. User dapat berkomunikasi antar Helm dengan Helm yang lain melalui jaringan wireless sinyal radio dari HT. Helm juga terhubung pada smartphone menggunakan bluetooth. Smartphone berfungsi sebagai penunjuk arah dengan adanya GPS dan aplikasi pendukung yang dibuat. Selain itu, pengemudi juga dapat menerima telfon dan mendengarkan musik dengan helm tanpa harus memegang smartphone. Metode perancangan menggunakan pendekatan water fall. Hasil rancangan diperoleh: (a) kerangka Helm yang …

Smart Door Locks Based On Internet Of Things Concept With Mobile Backend As A Service, Muhammad Izzuddin Mahali

Elinvo (Electronics, Informatics, and Vocational Education)

Smart Door Locks System Based on Internet of Things Concept with Mobile Backend as s Service is the smart door locks development are supported by cloud computing technology as data storage. Methods of development that exist in this system is to combine technology (1) ESP8266 (2) Firebase and (3) Android Apps. Firebase is one of cloud-based services that are used to store data online. ESP8266 able to communicate with firebase well to process the read and write data directly using internet communication channels. Android application used to direct communication to the firebase for monitoring and controlling simultaneously to the system. …

Generation Of Vector Partially Coherent Optical Sources Using Phase-Only Spatial Light Modulators, Milo W. Hyde Iv, Santasri Bose-Pillai, David G. Voelz, Xifeng Xiao

Faculty Publications

A simple and flexible optical system for generating electromagnetic or vector partially coherent sources or beams is presented. The alternative design controls field amplitude (beam shape), coherence, and polarization using only spatial light modulators. This improvement makes the apparatus simpler to construct and significantly increases the flexibility of vector partially coherent source generators by allowing many different types of sources to be produced without changing the physical setup. The system’s layout and theoretical foundations are thoroughly discussed. The utility and flexibility of the proposed system are demonstrated by producing a vector Schell-model and non-Schell-model source. The experimental results are compared …

Lithium-Sulfur (Selenium) Batteries: Interface Issues And Solving Strategies, Nian-Wu Li, Ya-Xia Yin, Yu-Guo Guo

Journal of Electrochemistry

The stable interface is still a challenge for lithium-sulfur (selenium) batteries because of the low conductivity of sulfur (selenium), dissolution of polysulfide (polyselenide), volume expansion of sulfur (selenium), and lithium dendrite growth. This review describers some recent developments in lithium-sulfur (selenium) batteries and highlights our efforts in this field. The possible strategies for building stable interface in the lithium-sulfur (selenium) batteries including nano-restriction effect, chemical bonding, interface adsorption, surface coating, electrolyte optimization, and Lithium anode treatment have been discussed.

Syntheses Of Ag@Pd@Pt Nanoparticles With Tunable Shell Thickness For Electrochemical Oxidation Of Formic Acid, Xiao-Dong Lin, Du-Hong Chen, Zhong-Qun Tian

Journal of Electrochemistry

In an effort to lower cost of a catalyst, the silver (Ag) core with palladium (Pd) layer then platinum (Pt) island (Ag@Pd@Pt) nanoparticles were synthesized and the electrocatalytic activity of Ag@Pd@Pt nanoparticles on formic acid was compared with that of Au@Pd@Pt nanoparticles reported previously. The results showed that the existence of a small amount of Pt could significantly improve the activity of the catalyst. When the surface coverage of Pt approached 0.5 monolayers, the activity of Ag@Pd@Pt nanoparticles reached the maximum. Though the onset potential of the electro-oxidation was slightly more positive (about 50 mV), the overall electrocatalytic activity of …

Intrinsic Interfacial Property Between High-Voltage Lini0.5Mn1.5O4 Cathode And Electrolyte, Li Li, Jing-Jing Xu, Shao-Jie Han, Wei Lu, Li-Wei Chen

Journal of Electrochemistry

To obtain high energy density, developing high-voltage cathode materials is an effective approach. The cathode/electrolyte interface stability is the key factor for the cycle performance and safety performance of high-voltage lithium ion batteries. It is, therefore, of significant importance to study the stability of cathode/electrolyte interface. However, many reports have shown that at the cathode/electrolyte interface the cathodes were prepared by coating the mixture of active materials with a conductive additive and a binder on an Al current collector. The introduction of additives will interfere the surface morphology and component analyses, resulting in difficulty to acquire the intrinsic information at …

Lithium Plating Identification From Degradation Behaviors Of Lithium-Ion Cells, Jian-Bo Zhang, Lai-Suo Su, Xin-Yu Li, Hao Ge, Ya-Kun Zhang, Zhe Li

Journal of Electrochemistry

Lithium plating has huge impact on the lifetime and safety of lithium-ion cells. It is, therefore, necessary to identify lithium plating. In this study, the accelerated stress tests of lithium-ion cells were conducted under different conditions with multi-stress loads. Based on the different effects of the two major aging mechanisms, namely, SEI (Solid Electrolyte Interface) layer growth and lithium plating, on the degradation behaviors, two lithium plating identification methods of resistance-capacity plot and Arrhenius plot were employed. The experimental results revealed that the two identification methods are highly consistent with each other. Furthermore, the origins of capacity loss were distinguished …

Stm Investigation Of Oxygen Reduction Reaction On Solid Interface In Fuel Cell, Zhen-Feng Cai, Bing Sun, Wen-Jie Jiang, Ting Chen, Dong Wang, Li-Jun Wan

Journal of Electrochemistry

An electrocatalyst for oxygen reduction reaction (ORR) is an important component for fuel cells. An investigation at interfacial electrochemical reactions toward ORR at a molecular scale benefits mechanistic understanding as well as rational design of catalysts. Scanning tunneling microscopy (STM) has been proven to be a powerful tool to monitor chemical reactions and to provide in-situ information about the interfacial electrochemical reactions at a molecular level. This review summarizes the recent STM studies in monitoring the interface processes such as morphological changes, molecular changes, reaction intermediates, and oxidation products. The prospects of future development in this field are outlined.

A Study On The Oxidation Of Hydrogen Peroxide At Au(111) And Au(100) Electrodes, Yong-Li Zheng, Jie Wei, Yan-Xia Chen

Journal of Electrochemistry

The oxidation reactions of hydrogen peroxide (H₂O₂) at Au(111) and Au(100) electrodes in 0.1 mol·L^-1 HClO₄ were investigated by using rotating disk electrode system. It was found that H₂O₂ could be readily oxidized to O₂ at both Au(100) and Au(111) surfaces with the onset potential close to its equilibrium potential. In contrast, the onset overpotential for H₂O₂ reduction was above 0.4 V, while the onset overpotential for H₂O₂ oxidation at Au(100) was ca. 0.1 V more negative than that at Au(111), this is probably …

Chitosan/Nonahydrate Gel Derived Fe-N-Doped Porous Carbon Sheet As High-Efficient Orr Electrocatalyst, Fan-Lu Meng, Xin-Bo Zhang, Jun-Min Yan

Journal of Electrochemistry

The chitosan/nonahydrate gel was used as a precursor to realize the uniform mixture of N-polymer and metal salt. After lyophilization treatment, the gel went through heat treatment and acid etch. Accordingly, the Fe-N-doped porous carbon sheet with homogenous composition and microstructure was prepared. Compared with the commercial Pt/C catalyst, the Fe-N-doped porous carbon sheet exhibited more positive onset potential and half-wave potential, higher current density, and especially, excellent durability. The power density of 318 mW·cm^-2 was obtained in alkaline fuel cell with the Fe-N-doped porous carbon sheet as a cathode catalyst, which is higher than 267 mW·cm^-2 with …

Synthesis Of Ultrathin Co3O4 Nanoflakes Film Material For Electrochemical Sensing, Hui-Juan Wang

Journal of Electrochemistry

Ultrathin cobalt oxide (Co₃O₄ ) nanoflakes film material was synthesized by using an electro-deposited cobalt layer as a raw material through a simple oxidation method and followed by a heat treatment at 350 ^oC. The physical characterizations of the Co₃O₄ nanoflakes film were performed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) technologies, and the electrochemical activity was measured by cyclic voltammetry (CV). As a promising material for electrochemical sensing, the as-synthesized ultrathin Co₃O₄ nanoflakes film material exhibited excellent electrochemical activity for H₂O …

دینامیک سیستم های قدرت- بخش چهارم, Hadi Zayandehroodi

Dr. Hadi Zayandehroodi

No abstract provided.

A Novel Method For Sensorless Speed Detection Of Brushed Dc Motors, Ernesto Vazquez-Sanchez, Joseph Sottile, Jaime Gomez-Gil

Mining Engineering Faculty Publications

Many motor applications require accurate speed measurement. For brushed dc motors, speed can be measured with conventional observers or sensorless observers. Sensorless observers have the advantage of not requiring any external devices to be attached to the motor. Instead, voltage and/or current are measured and used to estimate the speed. The sensorless observers are usually divided into two groups: those based on the dynamic model, and those based on the ripple component. This paper proposes a method that measures the current of brushed dc motors and analyses the position of its spectral components. From these spectral components, the method estimates …

Electrical & Computer Engineering News, Georgia Southern University

Electrical & Computer Engineering News (2014-2023)

• Lim receives Biomedical Seed Grant with Augusta University to Improve Sleep Quality Monitoring for Patients with Parkinson's Disease

Improvements To Micro-Contact Performance And Reliability, Tod V. Laurvick

Theses and Dissertations

Microelectromechanical Systems (MEMS) based devices, and specifically microswitches, continue to offer many advantages over competing technologies. To realize the benefits of micro-switches, improvements must be made to address performance and reliability shortfalls which have long been an issue with this application. To improve the performance of these devices, the micro-contacts used in this technology must be understood to allow for design improvements, and offer a means for testing to validate this technology and determine when such improvements are ready for operational environments. To build devices which are more robust and capable of continued operation after billions of cycles requires that …

Integrated Circuit Wear-Out Prediction And Recycling Detection Using Radio-Frequency Distinct Native Attribute Features, Randall D. Deppensmith

Theses and Dissertations

Radio Frequency Distinct Native Attribute (RF-DNA) has shown promise for detecting differences in Integrated Circuits(IC) using features extracted from a devices Unintentional Radio Emissions (URE). This ability of RF-DNA relies upon process variation imparted to a semiconductor device during manufacturing. However, internal components in modern ICs electronically age and wear out over their operational lifetime. RF-DNA techniques are adopted from prior work and applied to MSP430 URE to address the following research goals: 1) Does device wear-out impact RF-DNA device discriminability?, 2) Can device age be continuously estimated by monitoring changes in RF-DNA features?, and 3) Can device age state …

A Locomotion Control Algorithm For Robotic Linkage Systems, Jeffrey L. Dohner Dr.

Electrical and Computer Engineering ETDs

This dissertation describes the development of a control algorithm that transitions a robotic linkage system between stabilized states producing responsive locomotion. The developed algorithm is demonstrated using a simple robotic construction consisting of a few links with actuation and sensing at each joint. Numerical and experimental validation is presented. In this algorithm, transitioning excitations, called rhythms, are formulated using terminal state control solutions. Rhythms are constrained to be low order parameterized functions allowing for the optimal control problem to be replaced by a parametric optimization problem with a limited set of easily solved unknowns. This algorithm is developed and demonstrated …

Mass Reduction Patterning Of Silicon-On-Oxide–Based Micromirrors, Harris J. Hall, Andrew Green, Sarah Dooley, Jason D. Schmidt, Lavern A. Starman, Derrick Langley, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

It has long been recognized in the design of micromirror-based optical systems that balancing static flatness of the mirror surface through structural design with the system’s mechanical dynamic response is challenging. Although a variety of mass reduction approaches have been presented in the literature to address this performance trade, there has been little quantifiable comparison reported. In this work, different mass reduction approaches, some unique to the work, are quantifiably compared with solid plate thinning in both curvature and mass using commercial finite element simulation of a specific square silicon-on-insulator–based micromirror geometry. Other important considerations for micromirror surfaces, including surface …

Phased Helical Antenna Array For Cubesat Application, Kameron Lacalli

Undergraduate Honors Theses

CubeSats communication links are typically slow due to their power and size restrictions. However, a low power, high speed down link connection can allow for greater data collection and relaying, pushing the capability of 1U CubeSats beyond what is traditionally thought possible. Investigated here is the feasibility of a 11 Mb/s down link connection on a 1U CubeSat, accomplished via 2x2 helical antenna phased array operating on the 802.11 standard. Using a phased array also allows for beam steering to secure connection with the ground station when the on board ADCS may not provide precise pointing capability of the CubeSat, …

Curricular Analytics In Higher Education, Ahmad Slim 3589498

Electrical and Computer Engineering ETDs

The dissertation addresses different aspects of student success in higher education. Numerous factors may impact a student's ability to succeed and ultimately graduate, including pre-university preparation, as well as the student support services provided by a university. However, even the best efforts to improve in these areas may fail if other institutional factors overwhelm their ability to facilitate student progress. This dissertation addresses this issue from the perspective of curriculum structure. The structural properties of individual curricula are studied, and the extent to which this structure impacts student progress is explored. The structure of curricula are studied using actual university …

Fault Discrimination Algorithm For Busbar Differential Protection Relaying Using Partial Operating Current Characteristics, Monir Hossain

University of New Orleans Theses and Dissertations

Differential protection is the unit protection system which is applied to protect a particular unit of power systems. Unit is known as zone in protection terminology which is equivalent to simple electrical node. In recent time, low impedance current differential protection schemes based on percentage restrained characteristics are widely used in power systems to protect busbar systems. The main application issue of these schemes is mis-operation due to current transformer (CT) saturation during close-in external faults. Researchers have suggested various solution of this problem; however, individually they are not sufficient to puzzle out all mis-operational scenarios. This thesis presents a …