Electrical and Computer Engineering Commons^™

Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova

Technical science and innovation

The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …

Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova

Technical science and innovation

This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova

Technical science and innovation

This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …

Electromagnetic Field Model As A Source Of Water Cavitation Energy, Mexrnoz Odiljonovna Gafurova, Kudrat Gayratovich Abidov Dsc

Technical science and innovation

The article investigates numerical models of cavitation processes in water, fluid flow taking into account process to determine the optimal parameters for the operation of the device. A mathematical model of a rotating electromagnetic field for designing a rotary vortex generator based on cavitation processes in water is considered. The interaction of charged particles is considered in the article, which made it possible to determine the types of oscillatory processes. The study of the rotating electromagnetic field made it possible to determine the vibrationally rotational motion of molecules, which are the basis for obtaining thermal energy. In addition, describes electromagnetic …

Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev

Technical science and innovation

The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov

Technical science and innovation

This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …

A New Method To Start Loaded Induction Motors, Omar El-Sayed Mohammed Youssef

Journal of Engineering Research

Three-phase induction motors have a widespread use in industry, and starting of loaded induction motors is an important matter. However, there are few studies on motor starting using variable-frequency drives (VFDs). The existing control schemes, described by these studies, have disadvantages such as dependence on derived characteristics, adjustment of settings, design of controllers, or burden of calculations on the control processor. In this paper, a simple and effective control scheme of VFDs to start loaded motors is proposed. In this scheme, there is no dependence on any characteristic, adjustment of settings, controllers, and rotor speed sensor. By this scheme, the …

Allocation Of Phasor Measurement Units In The Wide-Area Measurement System, Samir Dawoud, Mohamed Elnemr, Alyaa Yehia

Journal of Engineering Research

WIDE Area in the power system which has been introduced to power system literature in the late 1980s. They are now commercially in power systems for purposes of monitoring, operation, and control. The wide area is a combination between the phasor measurement unit (PMU) and communication infrastructure (CI). In this paper, the location of the PMU and the CI can be optimized to involve system observability. There are a lot of methods to solve the optimal placement of PMU. The communication infrastructure is designed and implemented to collect the data from PMU and transfer data to the control center. In …

Optimization Of An Off-Grid Pv/Biogas Hybrid Energy System For Electrification: A Case Study In A Rural Area In Egypt, Ibrahim A. Elzahy, Ahmed Refaat, Samir Dawoud

Journal of Engineering Research

The increasing demand for energy in remote or rural areas, coupled with the environmental benefits and cost-effectiveness of renewable energy sources, has led to a growing interest in off-grid energy systems. This paper proposes an optimized off-grid energy system to supply energy demand for a village and a desalination reverse osmosis water plant (RO) in Shalateen, Egypt, using a combination of photovoltaic (PV) and biomass technologies. To achieve minimizing Loss of Power Supply Probability (LPSP) and Total Net Present Cost (TNPC), two decision variables are optimized using the Harmony Search algorithm implemented in MATLAB. The reliability of a designed system …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

The Determination Of Pzc And Differential Capacitance Curve Of Platinum-Alkaline Polymer Electrolyte Interfaces, Chen-Xi Liu, Ze-Ping Zou, Mei-Xue Hu, Yu Ding, Yu Gu, Shuai Liu, Wen-Jing Nan, Yi-Chang Ma, Zhao-Bin Chen, Dong-Ping Zhan, Qiu-Gen Zhang, Lin Zhuang, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Alkaline polymer electrolyte (APE) is the core component of modern alkaline hydrogen and oxygen fuel cells, and its single ion conductor nature makes the "electrode/APE" interfaces different from the conventional "electrode/solution" interfaces in terms of ion distribution, electrical double layer structure and polarization behavior. Due to the complexity of the APE and the associated solid-solid interfaces, fundamental investigations are challenging and deeper understanding of the structures and properties of such interfaces is in the infant stage. In this work, we aim to investigate the double layer structure from the aspects of differential capacitance curve and potential of zero charge (PZC) …

Development Demand, Power Energy Consumption And Green And Low-Carbon Transition For Computing Power In China, Xiaohong Chen, Liaoying Cao, Jiaolong Chen, Jinghui Zhang, Wenzhi Cao, Yangjie Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

As a critical digital infrastructure, computing power has become the core productivity and a new engine driving economic growth in the digital economy. Nevertheless, the power-hungry nature of computing/data centers, representing the computing infrastructure, consumes a significant amount of electrical energy. Currently, China’s economy is transitioning from high-speed growth to high-quality development. It is imperative to study how to coordinate the development of computing power while ensuring its safety and achieving green and low-carbon goals. Based on an overview of the current status of computing power development, this study predicts the future demand for computing power in China, analyzes the …

Intelligent Protection Scheme Using Combined Stockwell-Transform And Deep Learning-Based Fault Diagnosis For The Active Distribution System, Latha Maheswari Kandasamy, Kanakaraj Jaganathan

Turkish Journal of Electrical Engineering and Computer Sciences

This study aims to perform fast fault diagnosis and intelligent protection in an active distribution network (ADN) with high renewable energy penetration. Several time-domain simulations are carried out in EMTP-RV to extract time-synchronized current and voltage data. The Stockwell transform (ST) was used in MATLAB/SIMULINK to preprocess these input datasets to train the adaptive fault diagnosis deep convolutional neural network (AFDDCNN) for fault location identification, fault type identification, and fault phase-detection for different penetration levels. Based on the AFDDCNN output, the intelligent protection scheme (IDOCPS) generates the signal for isolating a faulty section of the ADN. An intelligent fault diagnosis …

Consensus-Based Virtual Leader Tracking Algorithm For Flight Formation Control Of Swarm Uavs, Berat Yıldız, Akif Durdu, Ahmet Kayabaşi

Turkish Journal of Electrical Engineering and Computer Sciences

Technological developments in industrial areas also impact unmanned aerial vehicles (UAVs). Recent improvements in both software and hardware have significantly increased the use of many UAVs in social and military fields. In particular, the widespread use of these vehicles in social areas such as entertainment, shipping, transportation, and delivery and military areas such as surveillance, tracking, and offensive measures has accelerated the research on swarm systems. This study examined the previous investigations on swarm UAVs and aimed to create a more efficient algorithm. The effectiveness of the proposed algorithm was compared with other leader-based applications. A swarm consisting of 5 …

Lower Data Attacks On Advanced Encryption Standard, Orhun Kara

Turkish Journal of Electrical Engineering and Computer Sciences

The Advanced Encryption Standard (AES) is one of the most commonly used and analyzed encryption algorithms. In this work, we present new combinations of some prominent attacks on AES, achieving new records in data requirements among attacks, utilizing only 2 4 and 2 16 chosen plaintexts (CP) for 6-round and 7-round AES 192/256, respectively. One of our attacks is a combination of a meet-in-the-middle (MiTM) attack with a square attack mounted on 6-round AES-192/256 while another attack combines an MiTM attack and an integral attack, utilizing key space partitioning technique, on 7-round AES-192/256. Moreover, we illustrate that impossible differential (ID) …

Cascade Controller Design Via Controller Synthesis For Load Frequency Control Of Electrical Power Systems, Yavuz Güler, Mustafa Nalbantoğlu, Ibrahim Kaya

Turkish Journal of Electrical Engineering and Computer Sciences

The regulation of tie-line electricity flow and frequency of electrical power systems (EPS) is crucial for ensuring their robustness to parameter changes and efficient management of disturbances. To this end, a novel cascade control design approach utilizing a serial Proportional-Integral-Derivative controller with a filter (PIDF) is proposed in this paper. The parameters of the controllers are derived analytically, and it is employed in both loops of the cascade control system to regulate the Load Frequency Control (LFC) of EPS. The implementation of PIDF controllers in both loops is utilized in the cascade control scheme for various power systems featuring different …

Advanced Hyperthermia Treatment: Optimizing Microwave Energy Focus For Breast Cancer Therapy, Burak Acar, Tuba Yilmaz Abdolsaheb, Ali Yapar

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a fast antenna phase optimization scheme to enable microwave power focusing for breast cancer hyperthermia. The power focusing is achieved through the maximization of the deposited electric field on the target malignant tumor tissue. To do so, a malignant breast tumor, the surrounding breast medium, and the skin of the breast are modeled as a cylindrical structure composed of eccentric cylinders, and electric field distribution is computed analytically in terms of cylindrical harmonics. This approach minimized the computational cost and simplified the breast medium model. To ensure applicability across various breast types, the dielectric properties (DPs) of …

Atomic Comagnetometer Gyroscopes For Inertial Navigation Systems: A Review, Murat Salim Karabinaoglu, Bekir Çakir, Mustafa Engin Başoğlu

Turkish Journal of Electrical Engineering and Computer Sciences

In recent years, developments in quantum sensing, laser, and atomic sensor technologies have also enabled advancement in the field of quantum navigation. Atomic-based gyroscopes have emerged as one of the most critical atomic sensors in this respect. In this review, a brief technology statement of spin exchange relaxation free (SERF) and nuclear magnetic resonance (NMR) type atomic comagnetometer gyroscope (CG) is presented. Related studies in the literature have been gathered, and the fundamental compositions of CGs with technical basics are presented. A comparison of SERF and NMR CGs is provided. A basic simulation of SERF CG was carried out because …

Uncovering And Mitigating Spurious Features In Domain Generalization, Saeed Karimi, Hamdi̇ Di̇bekli̇oğlu

Turkish Journal of Electrical Engineering and Computer Sciences

Domain generalization (DG) techniques strive to attain the ability to generalize to an unfamiliar target domain solely based on training data originating from the source domains. Despite the increasing attention given to learning from multiple training domains through the application of various forms of invariance across those domains, the enhancements observed in comparison to ERM are nearly insignificant under specified evaluation rules. In this paper, we demonstrate that the disentanglement of spurious and invariant features is a challenging task in conventional training since ERM simply minimizes the loss and does not exploit invariance among domains. To address this issue, we …

Strategy For Predictive Control Of The Rectification Process Based On A Model Controller With A Given Forecast, Ildar Rafkatovich Sultanov

Chemical Technology, Control and Management

A method is being developed to optimize the generated controls for the multicomponent distillation process with prediction, based on predictive data with a moving horizon. The difference between this method and the classical modeling approach, in which the percentage of the degree of opening of valves installed on the output streams of the column is used as control actions, is that control occurs on the feedback principle. The proposed method is based on the use of a dynamic process model to optimize control actions in real time in order to achieve certain production targets. The essence of the MPC approach …

Identification Of Faults In Highways Using Approximation Methods And Algorithms, Khudayberdiyev Khakkulmirzayevich Mirzaakbar, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile device during car movement. We determine the uneven parts of the road. Smooth and well-maintained roads reduce the risk of vehicle collisions, skidding and other road-related incidents. Timely measures contribute to overall safety, comfort and economic efficiency.

A Neural Network Model For Monitoring And Forecasting The Process Of Storing Oilseeds, N.A. Kabulov

Chemical Technology, Control and Management

The paper presents the results of research on the control, forecasting and management of the storage process of oilseeds. Vegetable oil production and energy consumption are two important factors of oilseed storage systems. The first ones should meet the needs of the population quantitatively and qualitatively. As a result, in order to properly control these two important aspects, it is necessary to maintain an appropriate microclimatic environment using a computational decision support system (DSS) that is able to adapt to changes in environmental characteristics. The multilayer perceptron neural network (MLP-NN) was developed to simulate the temperature and relative humidity profiles …

Synthesize A Neural Network Parameter Optimizer For An Adaptive Pid Controller, Nashvandova Gulruxsor Murot Qizi

Chemical Technology, Control and Management

Wide application of proportional-integral-differential (PID)-regulator in industry requires constant improvement of methods of its parameters superstructuring. In the paper, the questions of optimization of PID-regulator parameters with application of methods of neural network technology are considered. A methodology for selecting the architecture of neural network optimizer designed to determine the tuned parameters of PID regulator is proposed. The algorithm of training of the neural network, with the set on the basis of the method of inverse gradient propagation is offered. The proposed improved PID-neural regulator allowed to provide stabilization of neural network operation and its trainability in the control loop …

Development Of A Criterion Assessing The Level Of Relationship Of Multiple Identified Characteristics For Classification, Mirzoyan Mirzaaxmedovich Kamilov, Oybek Zokirovich Koraboshev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article discusses an optimized version of the standard design developed by Yu.I.Zhuravlev, an optimization procedure through an algebraic approach based on precedent algorithms that solves the problem of pattern identification. The formation of the convex hull of the recognition operator and corrective procedures of information models by mutual compensation of each other was also studied. In addition, the functional connection of recognition operators and the definition of idempotent connection of operators are analyzed.

Analytical-Critical Review Of Widely Used Industrial Devices For Drying Mineral Fertilizers, Djalolitdin Paxritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

The article is devoted to the review of the modern state of research in the mineral fertilizers drying field, critical analysis and comparison of widely used drying apparatuses. There are procedures of preliminary equipment selection for soluble fertilizers industrial drying on the basis of such criteria as productivity, efficiency, energy saving, environmental impact degree, indicating the possible advantages and disadvantages of different application variants.

Calculation Of Hydraulic Resistance Of A Tubular-Gridse Nozzle With Spiral Turbulizers, Nurmukhamedov Habibulla Sagdullaevich, Mavlonov Elbek Tulkinovich, S.Kh. Nishonova, Kh.S. Nurmukhamedov

Chemical Technology, Control and Management

The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of smooth pipes and pipes with turbulators. Spiral turbulators are placed discretely with a step t/d=0,3125-0,9375 and installed on a tube sheet in a checkerboard pattern with a step s/d=1,15-10. Experimental studies were carried out with air flow in the transition region.

It has been established that with increasing numerical values of the dimensionless parameter s/d, the resistance of the pipe package decreases from 1,3 to 1,8 …