Robotics Commons^™

The Development And Testing Of A Gyroscope-Based Neck Strengthening Rehabilitation Device, Nicole D. Devos

Electronic Thesis and Dissertation Repository

Neck pain can be debilitating, and is experienced by the majority of people at some point over the course of their life. Resistance training has been shown to have significant improvement in pain or disability for patients. There are few options available for telerehabilitation, and the use of gyroscope stabilizers is proposed for this use. A biomechanics model of a head--neck--gyroscope system was created. In order to also model the dynamics of such a system, this work proposes a blended method using the Denavit--Hartenberg (DH) convention, popular in the field of robotics, with the Lagrangian mechanics approach to analyze an …

Evaluating Eeg–Emg Fusion-Based Classification As A Method For Improving Control Of Wearable Robotic Devices For Upper-Limb Rehabilitation, Jacob G. Tryon

Electronic Thesis and Dissertation Repository

Musculoskeletal disorders are the biggest cause of disability worldwide, and wearable mechatronic rehabilitation devices have been proposed for treatment. However, before widespread adoption, improvements in user control and system adaptability are required. User intention should be detected intuitively, and user-induced changes in system dynamics should be unobtrusively identified and corrected. Developments often focus on model-dependent nonlinear control theory, which is challenging to implement for wearable devices.

One alternative is to incorporate bioelectrical signal-based machine learning into the system, allowing for simpler controller designs to be augmented by supplemental brain (electroencephalography/EEG) and muscle (electromyography/EMG) information. To extract user intention better, sensor …

Automatic Classification And Segmentation Of Patterned Martian Ground Using Deep Learning Techniques, Ruthy Brito

Electronic Thesis and Dissertation Repository

Science autonomy onboard spacecraft can optimize image return by prioritizing downlink of meaningful data. Martian polygonally cracked ground is actively studied by planetary geologists and may be indicative of subsurface water. Filtering images containing these polygonal features can be used as a case study for science autonomy and to reduce the overhead associated with parsing through Martian surface images. This thesis demonstrates the use of deep learning techniques in the classification of Martian polygonally patterned ground from HiRISE images. Three tasks are considered, a binary classification to identify images containing polygons, multiclass classification distinguishing different polygon types and semantic segmentation …

Ai Applications On Planetary Rovers, Alexis David Pascual

Electronic Thesis and Dissertation Repository

The rise in the number of robotic missions to space is paving the way for the use of artificial intelligence and machine learning in the autonomy and augmentation of rover operations. For one, more rovers mean more images, and more images mean more data bandwidth required for downlinking as well as more mental bandwidth for analyzing the images. On the other hand, light-weight, low-powered microrover platforms are being developed to accommodate the drive for planetary exploration. As a result of the mass and power constraints, these microrover platforms will not carry typical navigational instruments like a stereocamera or a laser …

Autonomous Rock Segmentation From Lidar Point Clouds Using Machine Learning Approaches, Lauren E. Flanagan

Electronic Thesis and Dissertation Repository

Rover navigation on planetary surfaces currently uses a method called blind drive which requires a navigation goal as input from operators on Earth and uses camera images to autonomously detect obstacles. Images can be affected by lighting conditions, are not highly accurate from far distances, and will not work in the dark; these factors negatively impact the autonomous capabilities of rovers. By improving a rover's ability to autonomously detect obstacles, the capabilities of rovers in future missions would improve; for example, enabling exploration of permanently shadowed regions, and allowing faster driving speeds and farther travel distances. This thesis demonstrates how …

Precision Grasp Planning For Integrated Arm-Hand Systems, Shuwei Qiu

Electronic Thesis and Dissertation Repository

The demographic shift has caused labor shortages across the world, and it seems inevitable to rely on robots more than ever to fill the widening gap in the workforce. The robotic replacement of human workers necessitates the ability of autonomous grasping as the most natural but rather a vital part of almost all activities. Among different types of grasping, fingertip grasping attracts much attention because of its superior performance for dexterous manipulation. This thesis contributes to autonomous fingertip grasping in four areas including hand-eye calibration, grasp quality evaluation, inverse kinematics (IK) solution of robotic arm-hand systems, and simultaneous achievement of …

Mechanical Design And Development Of A Compliant 5-Dof Manipulator Using Magneto-Rheological Actuators, Sergey Pisetskiy

Electronic Thesis and Dissertation Repository

Compliance in robotic systems became a very important and desirable characteristic in recent years. Existing compliant actuation approaches have either limited performance or significant mechanical and control complexity. Keeping high performance while maintaining the necessary level of compliance at low cost and minimum complexity is a challenging goal that should be achieved to boost the propagation of human-safe robots and systems capable to perform delicate tasks in an unknown environment.

This study presents a novel five degrees-of-freedom compliant manipulator. The compliancy of the manipulator is achieved using antagonistically working pairs of magneto-rheological (MR) clutches in each joint of the robot. …

Visual Cues For Semi-Autonomous Control Of Transradial Prosthetics, Mena S.A. Kamel

Electronic Thesis and Dissertation Repository

Upper-limb prosthetics are typically driven exclusively by biological signals, mainly electromyography (EMG), where electrodes are placed on the residual part of an amputated limb. In this approach, amputees must control each arm joint iteratively, in a proportional manner. Research has shown that sequential control of prosthetics usually imposes a cognitive burden on amputees, leading to high abandonment rates. This thesis presents a control system for upper-limb prosthetics, leveraging a computer vision module capable of simultaneously predicting objects in a scene, their segmentation mask, and a ranked list of the optimal grasping locations. The proposed system shares control with an amputee, …

Development Of A Wearable Haptic Feedback Device For Upper Limb Prosthetics Through Sensory Substitution, Marco B.S. Gallone

Electronic Thesis and Dissertation Repository

Haptics can enable a direct communication pipeline between the artificial limb and the brain; adding haptic sensory feedback for prosthesis wearers is believed to improve operation without drawing too much of the user's attention. Through neuroplasticity, the brain can become more cognizant of the information delivered through the skin and may eventually interpret it as inherently as other natural senses. In this thesis, a wearable haptic feedback device (WHFD) is developed to communicate prosthesis sensory information. A 14-week, 6-stage, between subjects study was created to investigate the learning trajectory as participants were stimulated with haptic patterns conveying joint proprioception. 37 …

Geometric State Observers For Autonomous Navigation Systems, Miaomiao Wang

Electronic Thesis and Dissertation Repository

The development of reliable state estimation algorithms for autonomous navigation systems is of great interest in the control and robotics communities. This thesis studies the state estimation problem for autonomous navigation systems. The first part of this thesis is devoted to the pose estimation on the Special Euclidean group $\SE(3)$. A generic globally exponentially stable hybrid estimation scheme for pose (orientation and position) and velocity-bias estimation on $\SE(3)\times \mathbb{R}^6$ is proposed. Moreover, an explicit hybrid observer, using inertial and landmark position measurements, is provided.

The second part of this thesis is devoted to the problem of simultaneous estimation of the …

A Wearable Mechatronic Device For Hand Tremor Monitoring And Suppression: Development And Evaluation, Yue Zhou

Electronic Thesis and Dissertation Repository

Tremor, one of the most disabling symptoms of Parkinson's disease (PD), significantly affects the quality of life of the individuals who suffer from it. These people live with difficulties with fine motor tasks, such as eating and writing, and suffer from social embarrassment. Traditional medicines are often ineffective, and surgery is highly invasive and risky. The emergence of wearable technology facilitates an externally worn mechatronic tremor suppression device as a potential alternative approach for tremor management. However, no device has been developed for the suppression of finger tremor that has been validated on a human.

It has been reported in …

Nonlinear Attitude And Pose Filters With Superior Convergence Properties, Hashim Abdellah Hashim Mohamed

Electronic Thesis and Dissertation Repository

In this thesis, several deterministic and stochastic attitude filtering solutions on the special orthogonal group SO(3) are proposed. Firstly, the attitude estimation problem is approached on the basis of nonlinear deterministic filters on SO(3) with guaranteed transient and steady-state measures. The second solution to the attitude estimation problem considers nonlinear stochastic filters on SO(3) with superior convergence properties with two filters being developed in the sense of Ito, and one in the sense of Stratonovich.

This thesis also presents several deterministic and stochastic pose filtering solutions developed on the special Euclidean group SE(3). The first solution includes two nonlinear deterministic …

Virtual Reality Simulation Of Glenoid Reaming Procedure, Mohammadreza Faieghi

Electronic Thesis and Dissertation Repository

Glenoid reaming is a bone machining operation in Total Shoulder Arthroplasty (TSA) in which the glenoid bone is resurfaced to make intimate contact with implant undersurface. While this step is crucial for the longevity of TSA, many surgeons find it technically challenging. With the recent advances in Virtual Reality (VR) simulations, it has become possible to realistically replicate complicated operations without any need for patients or cadavers, and at the same time, provide quantitative feedback to improve surgeons' psycho-motor skills. In light of these advantages, the current thesis intends to develop tools and methods required for construction of a VR …

Generalized Scattering-Based Stabilization Of Nonlinear Interconnected Systems, Anastasiia Usova

Electronic Thesis and Dissertation Repository

The research presented in this thesis is aimed at development of new methods and techniques for stability analysis and stabilization of interconnections of nonlinear systems, in particular, in the presence of communication delays. Based on the conic systems' formalism, we extend the notion of conicity for the non-planar case where the dimension of the cone's central subspace may be greater than one. One of the advantages of the notion of non-planar conicity is that any dissipative system with a quadratic supply rate can be represented as a non-planar conic system; specifically, its central subspace and radius can be calculated using …

Modeling Of Force And Motion Transmission In Tendon-Driven Surgical Robots, Farshad Anooshahpour

Electronic Thesis and Dissertation Repository

Tendon-based transmission is a common approach for transferring motion and forces in surgical robots. In spite of design simplicity and compactness that comes with the tendon drives, there exists a number of issues associated with the tendon-based transmission. In particular, the elasticity of the tendons and the frictional interaction between the tendon and the routing result in substantially nonlinear behavior. Also, in surgical applications, the distal joints of the robot and instruments cannot be sensorized in most cases due to technical limitations. Therefore, direct measurement of forces and use of feedback motion/force control for compensation of uncertainties in tendon-based motion …

A Framework For Tumor Localization In Robot-Assisted Minimally Invasive Surgery, Nikita Chopra

Electronic Thesis and Dissertation Repository

Manual palpation of tissue is frequently used in open surgery, e.g., for localization of tumors and buried vessels and for tissue characterization. The overall objective of this work is to explore how tissue palpation can be performed in Robot-Assisted Minimally Invasive Surgery (RAMIS) using laparoscopic instruments conventionally used in RAMIS. This thesis presents a framework where a surgical tool is moved teleoperatively in a manner analogous to the repetitive pressing motion of a finger during manual palpation. We interpret the changes in parameters due to this motion such as the applied force and the resulting indentation depth to accurately determine …

Bim Assisted Design Process Automation For Pre-Engineered Buildings (Peb), Mohammad Delavar

Electronic Thesis and Dissertation Repository

The effective adoption and implementation of Building Information Modeling (BIM) is still challenging for the construction industry. However, studies and reports show a significant increase in the rate of BIM implementation and adoption in mainstream construction activities over the last five years. In contrast, Pre-Engineered Building (PEB) construction, a specialized construction system which provides a very efficient approach for construction of primarily industrial buildings, has not seen the same uptake in BIM implementation and adoption. The thesis reviews the benefits and the main applications of BIM for the PEB industry as well as challenges of its practical implementation. To facilitate …

Expert-In-The-Loop Multilateral Telerobotics For Haptics-Enabled Motor Function And Skills Development, Mahya Shahbazi

Electronic Thesis and Dissertation Repository

Among medical robotics applications are Robotics-Assisted Mirror Rehabilitation Therapy (RAMRT) and Minimally-Invasive Surgical Training (RAMIST) that extensively rely on motor function development. Haptics-enabled expert-in-the-loop motor function development for such applications is made possible through multilateral telerobotic frameworks. While several studies have validated the benefits of haptic interaction with an expert in motor learning, contradictory results have also been reported. This emphasizes the need for further in-depth studies on the nature of human motor learning through haptic guidance and interaction. The objective of this study was to design and evaluate expert-in-the-loop multilateral telerobotic frameworks with stable and human-safe control loops that …

Study Of Mobile Robot Operations Related To Lunar Exploration, Matthew Cross

Electronic Thesis and Dissertation Repository

Mobile robots extend the reach of exploration in environments unsuitable, or unreachable, by humans. Far-reaching environments, such as the south lunar pole, exhibit lighting conditions that are challenging for optical imagery required for mobile robot navigation. Terrain conditions also impact the operation of mobile robots; distinguishing terrain types prior to physical contact can improve hazard avoidance.

This thesis presents the conclusions of a trade-off that uses the results from two studies related to operating mobile robots at the lunar south pole. The lunar south pole presents engineering design challenges for both tele-operation and lidar-based autonomous navigation in the context of …

Modeling, Sensorization And Control Of Concentric-Tube Robots, Ran Xu

Electronic Thesis and Dissertation Repository

Since the concept of the Concentric-Tube Robot (CTR) was proposed in 2006, CTRs have been a popular research topic in the field of surgical robotics. The unique mechanical design of this robot allows it to navigate through narrow channels in the human anatomy and operate in highly constrained environments. It is therefore likely to become the next generation of surgical robots to overcome the challenges that cannot be addressed by current technologies. In CSTAR, we have had ongoing work over the past several years aimed at developing novel techniques and technologies for CTRs. This thesis describes the contributions made in …

Development Of An Autonomous Robotic Mushroom Harvester, Nikita Alexeevich Kuchinskiy

Electronic Thesis and Dissertation Repository

The process of development of a new robot is one of the modern technological arts. This process involves multiple complex steps and recursive approach. In this project, a solution for automatic harvesting of mushrooms is developed. In order to design an effective solution, it is necessary to explore and take into consideration the limitations of grasping very soft and fragile objects (particularly mushrooms). We will elaborate several strategies of picking and analyze each strategy to formulate the design requirements, develop a solution, and finally, evaluate the efficiency of the proposed solution in actual farm conditions for real mushrooms. The mushroom …

Application Of Simultaneous Localization And Mapping Algorithms For Haptic Teleoperation Of Aerial Vehicles, Bandar Hulayyil Aldhafeeri

Electronic Thesis and Dissertation Repository

In this thesis, a new type of haptic teleoperator system for remote control of Unmanned Aerial Vehicles (UAVs) has been developed, where the Simultaneous Localization and Mapping (SLAM) algorithms are implemented for the purpose of generating the haptic feedback. Specifically, the haptic feedback is provided to the human operator through interaction with artificial potential field built around the obstacles in the virtual environment which is located at the master site of the teleoperator system. The obstacles in the virtual environment replicate essential features of the actual remote environment where the UAV executes its tasks. The state of the virtual environment …

Design Of A Haptic Interface For Medical Applications Using Magneto-Rheological Fluid Based Actuators, Nima Najmaei

Electronic Thesis and Dissertation Repository

This thesis reports on the design, construction, and evaluation of a prototype two degrees-of-freedom (DOF) haptic interface, which takes advantage of Magneto-Rheological Fluid (MRF) based clutches for actuation. Haptic information provides important cues in teleoperated systems and enables the user to feel the interaction with a remote or virtual environment during teleoperation. The two main objectives in designing a haptic interface are stability and transparency. Indeed, deficiencies in these factors in haptics-enabled telerobotic systems has the introduction of haptics in medical environments where safety and reliability are prime considerations. An actuator with poor dynamics, high inertia, large size, and heavy …

Automated Image Interpretation For Science Autonomy In Robotic Planetary Exploration, Raymond Francis

Electronic Thesis and Dissertation Repository

Advances in the capabilities of robotic planetary exploration missions have increased the wealth of scientific data they produce, presenting challenges for mission science and operations imposed by the limits of interplanetary radio communications. These data budget pressures can be relieved by increased robotic autonomy, both for onboard operations tasks and for decision- making in response to science data.

This thesis presents new techniques in automated image interpretation for natural scenes of relevance to planetary science and exploration, and elaborates autonomy scenarios under which they could be used to extend the reach and performance of exploration missions on planetary surfaces.

Two …

On Sensorless Collision Detection And Measurement Of External Forces In Presence Of Modeling Inaccuracies, Vahid Sotoudehnejad

Electronic Thesis and Dissertation Repository

The field of human-robot interaction has garnered significant interest in the last decade. Every form of human-robot coexistence must guarantee the safety of the user. Safety in human-robot interaction is being vigorously studied, in areas such as collision avoidance, soft actuators, light-weight robots, computer vision techniques, soft tissue modeling, collision detection, etc. Despite the safety provisions, unwanted collisions can occur in case of system faults. In such cases, before post-collision strategies are triggered, it is imperative to effectively detect the collisions. Implementation of tactile sensors, vision systems, sonar and Lidar sensors, etc., allows for detection of collisions. However, due to …

A Hybrid Visual Control Scheme To Assist The Visually Impaired With Guided Reaching Tasks, Duane Jacques

Electronic Thesis and Dissertation Repository

In recent years, numerous researchers have been working towards adapting technology developed for robotic control to use in the creation of high-technology assistive devices for the visually impaired. These types of devices have been proven to help visually impaired people live with a greater degree of confidence and independence. However, most prior work has focused primarily on a single problem from mobile robotics, namely navigation in an unknown environment. In this work we address the issue of the design and performance of an assistive device application to aid the visually-impaired with a guided reaching task. The device follows an eye-in-hand, …

System Of Terrain Analysis, Energy Estimation And Path Planning For Planetary Exploration By Robot Teams, David C. Michel

Electronic Thesis and Dissertation Repository

NASA’s long term plans involve a return to manned moon missions, and eventually sending humans to mars. The focus of this project is the use of autonomous mobile robotics to enhance these endeavors. This research details the creation of a system of terrain classification, energy of traversal estimation and low cost path planning for teams of inexpensive and potentially expendable robots.

The first stage of this project was the creation of a model which estimates the energy requirements of the traversal of varying terrain types for a six wheel rocker-bogie rover. The wheel/soil interaction model uses Shibly’s modified Bekker equations …

Development Of A Novel Handheld Device For Active Compensation Of Physiological Tremor, Abhijit Saxena

Electronic Thesis and Dissertation Repository

In microsurgery, the human hand imposes certain limitations in accurately positioning the tip of a device such as scalpel. Any errors in the motion of the hand make microsurgical procedures difficult and involuntary motions such as hand tremors can make some procedures significantly difficult to perform. This is particularly true in the case of vitreoretinal microsurgery. The most familiar source of involuntary motion is physiological tremor. Real-time compensation of tremor is, therefore, necessary to assist surgeons to precisely position and manipulate the tool-tip to accurately perform a microsurgery. In this thesis, a novel handheld device (AID) is described for compensation …