Other Computer Engineering Commons^™

Room Management Web Application And Movement And Temperature Sensors, Visalbotr Chan, Huy Anh Duong

Computer Engineering

There are three main parts of this system: micro-controller, database, and website. Micro-controller detects motion of people walking in and out and It also measures room temperature and humidity in a confined space then updates collected data to the database. Our system’s database contains 6 main columns: room number, room capacity, number of students, temperature in Celsius, humidity in percent and date created. Finally, this database is queried by the website to display the information on the webpage. Users could also navigate on our site to check the most and least occupy rooms, and they can also search for a …

Home Weather Station, Jarrett William Corr

Computer Engineering

This senior project implements a mobile weather station that can relay weather data to an indoor module with an LCD display. The outdoor module utilizes a temperature, humidity, and pressure sensor to collect atmospheric weather data and a radio transceiver to transmit the data to a display station via radio frequency communications. The indoor station displays the temperature, humidity and time with an LCD display. The indoor station has a settings menu which allows the user to configure the unit of measurement for the temperature and time where the device is located.

Dynamic Video Streaming For Nano Quadcopters, Shane Daniel Kent, Ryan Weideman, Nicholas Kimball

Computer Engineering

The objective of this project was to develop a system that streams real-time video from a Crazyflie 2.0 nano quadcopter. We discuss the motivation behind the project including applications to swarm robotics and computer vision research. We highlight the initial research and design goals that guided the development of the system such as hardware selection and system specifications. We detail the software and hardware subsystems that we implemented including the video-streaming board, firmware, and video-streaming user application. We examine the performance of the final system and discuss the limitations imposed by the hardware. We conclude by describing future work that …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Daily Dose, Ken H. Yasui, Joey M. Angeja

Computer Engineering

The project goal is to develop a medication and vitamin management device that will sort and dispense pre-configured amounts of pills at designated times . The main clientele of this device is the elderly community with a secondary client base of the general public. The entire system is designed from scratch, powered by US standard line voltage. The main functionalities of the device are the ability to store multiple types of pills and the ability to accurately handle user input and data transfer. The two engineering specifications that were not met included the desired pill pick up rate and dimensions …

Software Updates To A Multiple Autonomous Quadcopter Search System (Maqss), Jared Speck, Toby Chan

Computer Engineering

A series of performance-based and feature implementation software updates to an existing multiple vehicle autonomous target search system is outlined in this paper. The search system, MAQSS, is designed to address a computational power constraint found on modern autonomous aerial platforms by separating real-time and computationally expensive tasks through delegation to multiple multirotor vehicles. A Ground Control Station (GCS) is also described as part of the MAQSS system to perform the delegation and provide a low workload user interface. Ultimately, the changes to MAQSS noted in this paper helped to improve the performance of the autonomous search mission, the accuracy …

Evergreen: A Senior Project, Ashley Grover

Computer Engineering

No abstract provided.

Teaching The Internet Of Things: Bridging A Path From Cpe329, Steven Han, Rafael Lopez

Computer Engineering

“The ability to connect, communicate with, and remotely manage an incalculable number of networked, automated devices via the Internet is becoming pervasive, from the commercial kitchen to the residential basement room to the arm of the fitness buff.” - WSO2

In this report, we will investigate procedures and technologies used in IoT. A variety of cloud platforms will be described to demonstrate its strengths and usage on IoT applications. Furthermore, demonstrate the most popular hardware being used in several of these applications. This report is aimed to give a good understanding on what it takes to put together an IoT …

Duck Watch: A Smart System For Public Lap Pools, Daniel Griffith, Jill Thetford

Computer Engineering

This paper presents Duck Watch, a proof of concept for a smart swimming pool. With our system, a swimmer will be able to log on to our website prior to leaving his or her house to help them decide if the conditions are favorable to go to a public lap swimming pool. Our system will inform the user of a number of environmental factors such as water temperature, exterior temperature, and humidity, as well as whether or not there are any open lanes currently.

Senior Project: Control System For An Underwater Remotely Operated Vehicle, Tyler Mau, Joseph Mahoney

Computer Engineering

No abstract provided.

Chromium Os On Freescale I.Mx6q, Pushpal Sidhu

Computer Engineering

This projects intention is to get Chromium OS running on a Freescale i.MX6q processor, a processor based on the ARM® Cortex™-A9 architecture. The development board I used is the Ventana GW5400 by Gateworks. This project inherently meant using Chromium OS's development system which meant I created a board specific package for the Ventana single board computer. This project is a proof of concept that can mean extending Chromium OS to various implementations of the ARM® Cortex™-A9 architecture.

Wii-B-Fit Adaptive Wii Remote, Chris Lombardo

Computer Engineering

The goal of this project was to fix and supplement the original Wii-B-Fit system in order to get it running again and improve on the original design. Wii-B-Fit’s original mission is to give people with paralysis the ability to participate in activities that they would not otherwise get to do, while creating a more fun, social, and independent lifestyle.Physical activity can help stimulate brain activity and is an integral part to a healthy lifestyle. Quadriplegia however makes it extremely hard to perform most forms of physical activity and severely limits the choices available to victims of the disease. The original …

Bluelock: A Secure Bluetooth Operated Padlock, Trever Mckee

Computer Engineering

For this project a secure, battery operated, Bluetooth operated padlock was created. The project included both the hardware to integrate with a padlock and an Android application used to interface with the hardware. In order to make the padlock secure both AES encryption and challenge response authentication were used for secure message passing between the device and the Android phone. The project also included power consumption and sustainability tuning including exploring Arduino sleep states and integrating the project with a solar charging unit.

Frg Turbojet, Tyler Vitti

Computer Engineering

Members of the Cal Poly SLO campus club FRG work together with students of several different disciplines to build a functional turbojet engine. Engineering approaches include design, fabrication, testing, and computer sensing, control, and integration. The goal of the project is to produce a running turbojet engine monitored and controlled by embedded hardware and specialized PC software. This project is to be used by later groups for further research and development.

Bluemote!, Philip Kaye

Computer Engineering

In today’s society, our mobile phones are an extremely useful device when we are on the go and away from our homes; however, when we return home, our smart phone becomes just a communication tool again. Home automation is inevitable, and it will find its way into every house. The first person to commercialize it to the point where it is as easy to set-up and as affordable as a home router will end up breaking this slow trend. The key to this success is the smart phone; this should end up being the most expensive piece of hardware for …

Kreative Outlets, Travis Crist, Steve Clark, Jason Peressini

Computer Engineering

With the widespread use of smart phones and the advancement of WiFi technologies, people now have the Internet at their fingertips at all times. Home automation and control has the possibility of becoming the next big technology that can utilize the abundant availability of the Internet. This paper documents the findings and results of a project aimed at developing the infrastructure needed for a home automation system that is accessible anywhere. We implemented a system that utilized a web enabled ethernet connection and RF wireless technology to control AC outlets and provide the user with feedback information about the status …

Cplop - Cal Poly's Library Of Pyroprints, Kevin Webb

Computer Engineering

California Polytechnic Library of Pyroprints, CPLOP, is a web driven data-base application that stores data from the biology’s departments E. coli Pyrosequencing project. Some of this data was stored in Excel datasheets, while data from the pyrosequencing machines was stored as just a list of random .xml files. There was no useful way to organize and store the massive amounts of data from multiple file sources in one location, nor to perform the complicated searches and comparisons that the project requires. CPLOP’s primary goal is to store such data in three organized tables that relate to one another. It was …

Development Of A Cubesat Payload To Model Particle Dampening In Space: Design And Implementation Of Software For Cp7, Daniel Walker

Computer Engineering

The California Polytechnic State University CubeSat student research & development group, PolySat, is currently in a mature development stage of a single unit CubeSat designated CP7. The CP7 mission implements a scientific payload designed to characterize particle dampers in microgravity conditions. When subjected to vibration, the momentum exchanges and frictional forces of the particles create a damping effect that can be optimized to suit a number of applications over a broad frequency and amplitude range. In space based applications, particle dampers would serve as a robust and simple device to eliminate jitter in optical assemblies and other sensitive instrumentation. This …

Ultrasonic Shark-Tag Locator System For Iver2 Auv, Nathaniel Garcia

Computer Engineering

The purpose of this project is to develop a system for tracking an ultrasonic underwater transmitter that can be integrated into an IVER2 AUV to allow it to follow and monitor tagged sharks in the ocean for scientific research.

The system consists of a four main components including a shark-tag, two hydrophones, a filter/amplifier & threshold detector circuit, and a microcontroller.

This project, while not completing field testing and integration with the IVER2, is a proof of concept of a system that utilizes passive sonar to determine a bearing from the system to a shark-tag transmitter. Additionally, it devised several …

A Low Power Touch Screen Document Viewer, Chris Perfetto

Computer Engineering

This document will cover the requirements, design, implementation and testing of a low power touch screen document viewer to serve as a replacement bulletin board. It was Implemented using a BeagleBoard development board, a 4.3” touchscreen LCD and a SD card with a Ubuntu Linux OS installed. The testing of this device is primarily testing the power consumption. The device is not yet complete and will require further development for it to completely satisfy the requirements.

Global Positioning Logger, Matthew Hall

Computer Engineering

The Global Positioning Logger (GPL) is a mobile embedded device that utilizes GPS technology. The GPS data is used to display current speed and past global locations.