Computer Engineering Commons^™

How Can We Build A Moral Robot?, Kristen E. Clark

Capstones

Artificial intelligence is already starting to drive our cars and make choices that affect the world economy. One day soon, we’ll have robots that can take care of our sick and elderly, and even rescue us in rescue us in emergencies. But as robots start to make decisions that matter—it’s raising questions that go far beyond engineering. We’re stating to think about ethics.

Bertram Malle and Matthias Scheutz are part of a team funded by the department of defense. It's their job to answer a question that seems straight out of a sci-fi novel: How can we build a moral …

Demonstration Of Inexact Computing Implemented In The Jpeg Compression Algorithm Using Probabilistic Boolean Logic Applied To Cmos Components, Christopher I. Allen

Theses and Dissertations

Probabilistic computing offers potential improvements in energy, performance, and area compared with traditional digital design. This dissertation quantifies energy and energy-delay tradeoffs in digital adders, multipliers, and the JPEG image compression algorithm. This research shows that energy demand can be cut in half with noisesusceptible16-bit Kogge-Stone adders that deviate from the correct value by an average of 3 in 14 nanometer CMOS FinFET technology, while the energy-delay product (EDP) is reduced by 38 . This is achieved by reducing the power supply voltage which drives the noisy transistors. If a 19 average error is allowed, the adders are 13 times …

Formal Modeling And Verification Of Delay-Insensitive Circuits, Hoon Park

Dissertations and Theses

Einstein's relativity theory tells us that the notion of simultaneity can only be approximated for events distributed over space. As a result, the use of asynchronous techniques is unavoidable in systems larger than a certain physical size. Traditional design techniques that use global clocks face this barrier of scale already within the space of a modern microprocessor chip. The most common response by the chip industry for overcoming this barrier is to use Globally Asynchronous Locally Synchronous (GALS) design techniques. The circuits investigated in this thesis can be viewed as examples of GALS design. To make such designs trustworthy it …

Autonomous Pipeline Monitoring And Maintenance System: A Rfid-Based Approach, Jong-Hoon Kim, Gokarna Sharma, Noureddine Boudriga, S.S. Iyengar, Nagarajan Prabakar

School of Computing and Information Sciences

Pipeline networks are one of the key infrastructures of our modern life. Proactive monitoring and frequent inspection of pipeline networks are very important for sustaining their safe and efficient functionalities. Existing monitoring and maintenance approaches are costly and inefficient because pipelines can be installed in large scale and in an inaccessible and hazardous environment. To overcome these challenges, we propose a novel Radio Frequency IDentification (RFID)-based Autonomous Maintenance system for Pipelines, called RAMP, which combines robotic, sensing, and RFID technologies for efficient and accurate inspection, corrective reparation, and precise geo-location information. RAMP can provide not only economical and scalable remedy …

From Boolean Equalities To Constraints, Sergio Antoy, Michael Hanus

Computer Science Faculty Publications and Presentations

Although functional as well as logic languages use equality to discriminate between logically different cases, the operational meaning of equality is different in such languages. Functional languages reduce equational expressions to their Boolean values, True or False, logic languages use unification to check the validity only and fail otherwise. Consequently, the language Curry, which amalgamates functional and logic programming features, offers two kinds of equational expressions so that the programmer has to distinguish between these uses. We show that this distinction can be avoided by providing an analysis and transformation method that automatically selects the appropriate operation. Without this distinction …

Data To Decisions For Cyberspace Operations, Steve Stone

Military Cyber Affairs

In 2011, the United States (U.S.) Department of Defense (DOD) named cyberspace a new operational domain. The U.S. Cyber Command and the Military Services are working to make the cyberspace environment a suitable place for achieving national objectives and enabling military command and control (C2). To effectively conduct cyberspace operations, DOD requires data and analysis of the Mission, Network, and Adversary. However, the DOD’s current data processing and analysis capabilities do not meet mission needs within critical operational timelines. This paper presents a summary of the data processing and analytics necessary to effectively conduct cyberspace operations.

Nd − Pdpa: N Dimensional Probability Density Profile Analysis, Arjang Fahim

Theses and Dissertations

Proteins are often referred as working molecule of a cell, performing many structural, functional and regulatory processes. Revealing the function of proteins still remains a challenging problem. Advancement in genomics sequence projects produces large protein sequence repository, but due to technical difficulty and cost related to structure determination, the number of identified protein structure is far behind. Novel structures identification are particularly important for a number of reasons: they generate models of similar proteins for comparison; identify evolutionary relationships; further contribute to our understanding of protein function and mechanism; and allow for the fold of other family members to be …

Security Protocol Suite For Preventing Cloud-Based Denial-Of-Service Attacks, Marwan M. Darwish

Electronic Thesis and Dissertation Repository

Cloud systems, also known as cloud services, are among the primary solutions of the information technology domain. Cloud services are accessed through an identity authentication process. These authentication processes have become increasingly vulnerable to adversaries who may perform denial-of-service (DoS) attacks to make cloud services inaccessible. Several strong authentication protocols have been employed to protect conventional network systems. Nevertheless, they can cause a DoS threat when implemented in the cloud-computing system. This is because the comprehensive verification process may exhaust the cloud resources and shut down cloud’s services. This thesis proposes a novel cloud-based secure authentication (CSA) protocol suite that …

Gpu Accelerated On-The-Fly Reachability Checking, Zhimin Wu, Yang Liu, Jun Sun, Jianqi Shi, Shengchao Qin

Research Collection School Of Computing and Information Systems

Model checking suffers from the infamous state space explosion problem. In this paper, we propose an approach, named GPURC, to utilize the Graphics Processing Units (GPUs) to speed up the reachability verification. The key idea is to achieve a dynamic load balancing so that the many cores in GPUs are fully utilized during the state space exploration.To this end, we firstly construct a compact data encoding of the input transition systems to reduce the memory cost and fit the calculation in GPUs. To support a large number of concurrent components, we propose a multi-integer encoding with conflict-release accessing approach. We …

All Your Sessions Are Belong To Us: Investigating Authenticator Leakage Through Backup Channels On Android, Guangdong Bai, Jun Sun, Jianliang Wu, Quanqi Ye, Li Li, Jin Song Dong, Shanqing Guo

Research Collection School Of Computing and Information Systems

Security of authentication protocols heavily relies on the confidentiality of credentials (or authenticators) like passwords and session IDs. However, unlike browser-based web applications for which highly evolved browsers manage the authenticators, Android apps have to construct their own management. We find that most apps simply locate their authenticators into the persistent storage and entrust underlying Android OS for mediation. Consequently, these authenticators can be leaked through compromised backup channels. In this work, we conduct the first systematic investigation on this previously overlooked attack vector. We find that nearly all backup apps on Google Play inadvertently expose backup data to any …

Data And Network Optimization Effect On Web Performance, Steven Rosenberg, Surbhi Dangi, Isuru Warnakulasooriya

Surbhi Dangi

In this study, we measure the effects of two software approaches to improving data and network performance: 1. Content optimization and compression; and 2. Optimizing network protocols. We achieve content optimization and compression by means of BoostEdge by ActivNetworks and employ the SPDY network protocol by Google to lower the round trip time for HTTP transactions. Since the data and transport layers are separate, we conclude our investigation by studying the combined effect of these two techniques on web performance. Using document mean load time as the measure, we found that with and without packet loss, both BoostEdge and SPDY …

Vanadium Oxide Thin-Film Variable Resistor-Based Rf Switches, Kuanchang Pan, Weisong Wang, Eunsung Shin, Kelvin Freeman, Guru Subramanyam

Guru Subramanyam

Vanadium dioxide (VO2) is a unique phase change material (PCM) that possesses a metal-to-insulator transition property. Pristine VO2 has a negative temperature coefficient of resistance, and it undergoes an insulator-to-metal phase change at a transition temperature of 68°C. Such a property makes the VO2 thin-film-based variable resistor (varistor) a good candidate in reconfigurable electronics to be integrated with different RF devices such as inductors, varactors, and antennas. Series single-pole single-throw (SPST) switches with integrated VO2 thin films were designed, fabricated, and tested. The overall size of the device is 380 μm × 600 μm. The SPST switches were fabricated on …

A High Performance Ceramic-Polymer Separator For Lithium Batteries, Jitendra Kumar, Padmakar Kichambare, Amarendra K. Rai, Rabi Bhattacharya, Stanley J. Rodrigues, Guru Subramanyam

Guru Subramanyam

A three-layered (ceramic-polymer-ceramic) hybrid separator was prepared by coating ceramic electrolyte [lithium aluminum germanium phosphate (LAGP)] over both sides of polyethylene (PE) polymer membrane using electron beam physical vapor deposition (EB-PVD) technique. Ionic conductivities of membranes were evaluated after soaking PE and LAGP/PE/LAGP membranes in a 1 Molar (1M) lithium hexafluroarsenate (LiAsF6) electrolyte in ethylene carbonate (EC), dimethyl carbonate (DMC) and ethylmethyl carbonate (EMC) in volume ratio (1:1:1). Scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were employed to evaluate morphology and structure of the separators before and after cycling performance tests to better understand structure-property correlation. As compared …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Guru Subramanyam

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

On Problematic Robotic Thresholds, Adam K. Taylor

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Large configuration spaces present difficulties for developers validating large soft- ware systems and for users selecting the proper configuration to achieve the desired runtime behavior. Robot systems face the same challenges as they may have hundreds of configurable parameters. Our work focuses on co-robotic systems, those in which robots and humans work closely together to augment each other’s capabilities. We aim to leverage the user’s knowledge about a system to help determine configuration errors. To accomplish this, users mark runtime failures while observing the system in operation. A marked error indicates the robot “did something when it should not have” …

Independency Of Elasticity On Residual Stress Of Room Temperature Rolled Stainless Steel 304 Plates For Structure Materials, Parikin Parikin, David Allen

Makara Journal of Technology

Mechanical strengths of materials are widely expected in general constructions of any building. These properties depend on its formation (cold/hot forming) during fabrication. This research was carried out on cold-rolled stainless steel (SS) 304 plates, which were deformed to 0, 34, 84, and 152% reduction in thickness. The tests were conducted using Vickers method. Ultra micro indentation system (UMIS) 2000 was used to determine the mechanical properties of the material, i.e.: hardness, modulus elasticity, and residual stresses. The microstructures showed lengthening outcropping due to stress corrosion cracking for all specimens. It was found that the tensile residual stress in a …

Effect Of Fly Ash Fortification In The Manufacture Process Of Making Concrete Towards Characteristics Of Concrete In Sulfuric Acid Solution, Asep Handaya Saputra, Muhammad Shohibi, Masatoshi Kubouchi

Makara Journal of Technology

Fly ash is a silica or alumino silica material that can be used as a constituent of cement in the concrete manufacturing process. Utilization of fly ash aims to improve durability and minimize the reduction of concrete’s compressive strength exposed to an acidic environment, which can be achieved through the pozzolanic reaction of fly ash with Ca(OH)2 within concrete. The reduced content of Ca(OH)2 through pozzolanic reaction will minimize the tendency of ettringite formation (compounds that cause deterioration and decrease the compressive strength of concrete). In order to determine the relation between fly ash replenishment into concrete with concrete’s characteristics …

Improvement Of Quality Of Carica Papaya L. With Clove Oil As Preservative In Edible Coating Technology, Eny Kusrini, Anwar Usman, Chrispine Deksita Wisakanti, Rita Arbianti, Dedy Alharis Nasution

Makara Journal of Technology

We have studied utilization of essential clove oil, extracted from clove buds by hydrodistillation, as preservative in edible packaging technology. Preservative of essential clove oil was applied on chopped papaya fruits by using two methods, namely spray and brush. The effects of concentration of clove oil from 0.05 to 0.20% on the preservation of papaya fruits (Carica papaya L.) at room temperature (25 °C) were also evaluated. Physicochemical and in vitro microbiological activities on the papaya fruits that were stored at 25 oC and 85-90% relative humidity were investigated in details. The results indicate that the clove oil at concentration …

Oxidation Process Of H 2 O /Uv For Cod Reduction Of Wastewater From Soybean Tofu Production, Komala Pontas, Abrar Muslim

Makara Journal of Technology

Chemical Oxygen Demand (COD) reduction of wastewater from soybean tofu production was studied by conducting advanced oxidation process (AOP) using hydrogen peroxide with UV radiation catalysts in a closed cylindrical glass reactor. The hydroxyl radical (*OH) concentration from H2O2 decomposition was modeled, and exponential trends were found for the *OH concentration over radiation time and operation temperature. As a result, it was found that the maximal *OH concentration was 0.209 mol L-1 at 240 minutes and 50 °C. The *OH concentration exponentially increased following rise in operation temperature. The H2O2/UV AOP application reduced COD concentration to approximately 42.41% from 10,545 …

Adapting Architectural Models For Visualization Using Virtual Reality Headsets, Bernardo Martinez

Honors Theses

Business contracts represent a main source of income for Architects. Acquiring these contracts requires the latest and most immersive technology that improves their sales against competitors. Virtual reality provides an in-depth experience that allows clients to have a reasonable assurance that the building meets their physical expectations. Videos and photos are detached and mundane; while they provide some visual representation they will not allow the user to compare his physical characteristics (height, length, width) with a 3D model. In this paper, I describe a procedure for automatically importing 3D models from Revit into Unreal4. I also describe the workflow required …

Improving Renewable Energy Transition Acceptance: A Simulation Gaming Approach On A Multi Actor Setting In The Netherlands, Aziiz Sutrisno, Jac A. M. Vennix, Noor Syaifudin

Makara Journal of Technology

The Netherlands have tried very hard to increase their renewable energy sources (RES) shares to fulfill the European Union target in 2050. However, RES performance did not show the expected result as the performance declined in 2009 producing even wider gap compare to the target. The Dutch government’s tried to incorporate all interested stakeholders by forming the Dutch energy transition task force. Nevertheless, the task force’s result is also not showing a desirable trend. Key reasons behind the Dutch low RES performance are the lack of shared understanding and positive attitude toward RES development among interested actors. This research uses …

Calibration Of Numerical Model For Shoreline Change Prediction Using Satellite Imagery Data, Sigit Sutikno, Keisuke Murakami, Dwi Puspo Handoyo, Manyuk Fauzi

Makara Journal of Technology

This paper presents a method for calibration of numerical model for shoreline change prediction using satellite imagery data in muddy beach. Tanjung Motong beach, a muddy beach that is suffered high abrasion in Rangsang Island, Riau province, Indonesia was picked as study area. The primary numerical modeling tool used in this research was GENESIS (GENEralized Model for Simulating Shoreline change), which has been successfully applied in many case studies of shoreline change phenomena on a sandy beach.The model was calibrated using two extracted coastlines satellite imagery data, such as Landsat-5 TM and Landsat-8 OLI/TIRS. The extracted coastline data were analyzed …

Dual-Band Singly-Fed Proximity-Coupled Tip-Truncated Triangular Patch Array For Land Vehicle Mobile System, Basari Basari, Josaphat Tetuko Sri Sumantyo

Makara Journal of Technology

This paper proposes a dual-band left-handed circularly polarized triangular-patch array that is developed for land vehicle mobile system aimed at mobile satellite communications. The array consists of six tip-truncated triangular patches, which the first three patches are used for reception and the second three patches are used for transmission purpose. Each of three-patches has a beam pattern that can be switched in three different 120°-coverage beam in azimuth-cut plane at a minimum targeted gain at a desired elevation angle. The targeted minimum gain of the array is 5 dBic, in order for data communications with a large geostationary satellite can …

Uplift Of Shoreline Regions On Pagai Island Due To The September 12, 2007 Mw 8.4 Earthquake Captured By Sar Image, Ashar Muda Lubis

Makara Journal of Technology

At least 25 people were killed by the September 12, 2007 Mw 8.4 Bengkulu earthquake, and many buildings were destroyed in Bengkulu and West Sumatra provinces. It is very important to estimate the earth surface deformation due to the earthquake to understand the rupture size and its process. The aim of this research is to estimate the shoreline change and vertical displacement on Pagai Island associated with the September 12, 2007 Mw 8.4 Bengkulu earthquake. The intensity of ALOS-PALSAR satellite images is used to access the pattern of displacement. The result shows that Pagai Island demonstrated huge uplift due to …

Plasmonic Field Confinement For Separate Absorption-Multiplication In Ingaas Nanopillar Avalanche Photodiodes, Alan C. Farrell, Pradeep Senanayake, Chung-Hong Hung, George El-Howayek, Abhejit Rajagopal, Marc Currie, Majeed M. Hayat, Diana L. Huffaker

Electrical and Computer Engineering Faculty Research and Publications

Avalanche photodiodes (APDs) are essential components in quantum key distribution systems and active imaging systems requiring both ultrafast response time to measure photon time of flight and high gain to detect low photon flux. The internal gain of an APD can improve system signal-to-noise ratio (SNR). Excess noise is typically kept low through the selection of material with intrinsically low excess noise, using separate-absorption-multiplication (SAM) heterostructures, or taking advantage of the dead-space effect using thin multiplication regions. In this work we demonstrate the first measurement of excess noise and gain-bandwidth product in III–V nanopillars exhibiting substantially lower excess noise factors …

Using Gpu To Accelerate Linear Computations In Power System Applications, Xue Li

Doctoral Dissertations

With the development of advanced power system controls, the industrial and research community is becoming more interested in simulating larger interconnected power grids. It is always critical to incorporate advanced computing technologies to accelerate these power system computations. Power flow, one of the most fundamental computations in power system analysis, converts the solution of non-linear systems to that of a set of linear systems via the Newton method or one of its variants. An efficient solution to these linear equations is the key to improving the performance of power flow computation, and hence to accelerating other power system applications based …

Hyperspectral Data Acquisition And Its Application For Face Recognition, Woon Cho

Doctoral Dissertations

Current face recognition systems are rife with serious challenges in uncontrolled conditions: e.g., unrestrained lighting, pose variations, accessories, etc. Hyperspectral imaging (HI) is typically employed to counter many of those challenges, by incorporating the spectral information within different bands. Although numerous methods based on hyperspectral imaging have been developed for face recognition with promising results, three fundamental challenges remain: 1) low signal to noise ratios and low intensity values in the bands of the hyperspectral image specifically near blue bands; 2) high dimensionality of hyperspectral data; and 3) inter-band misalignment (IBM) correlated with subject motion during data acquisition.

This dissertation …

Neuron Clustering For Mitigating Catastrophic Forgetting In Supervised And Reinforcement Learning, Benjamin Frederick Goodrich

Doctoral Dissertations

Neural networks have had many great successes in recent years, particularly with the advent of deep learning and many novel training techniques. One issue that has affected neural networks and prevented them from performing well in more realistic online environments is that of catastrophic forgetting. Catastrophic forgetting affects supervised learning systems when input samples are temporally correlated or are non-stationary. However, most real-world problems are non-stationary in nature, resulting in prolonged periods of time separating inputs drawn from different regions of the input space.

Reinforcement learning represents a worst-case scenario when it comes to precipitating catastrophic forgetting in neural networks. …

Arithmetic Logic Unit Architectures With Dynamically Defined Precision, Getao Liang

Doctoral Dissertations

Modern central processing units (CPUs) employ arithmetic logic units (ALUs) that support statically defined precisions, often adhering to industry standards. Although CPU manufacturers highly optimize their ALUs, industry standard precisions embody accuracy and performance compromises for general purpose deployment. Hence, optimizing ALU precision holds great potential for improving speed and energy efficiency. Previous research on multiple precision ALUs focused on predefined, static precisions. Little previous work addressed ALU architectures with customized, dynamically defined precision. This dissertation presents approaches for developing dynamic precision ALU architectures for both fixed-point and floating-point to enable better performance, energy efficiency, and numeric accuracy. These new …

Hands-Free Computer Interaction Using A Sip/Puff Sensor As A Mouse, Daniel Williams

Computer Engineering

No abstract provided.