Computer Engineering Commons^™

Barrier Knockdown Test Control System For The Cal Poly Kinesiology Department, Regina M. Chapuis

Computer Engineering

The goal of this project is to design and implement a new control system for the LEDs and buttons on an existing Barrier Knockdown setup in the Cal Poly Kinesiology department. The Barrier Knockdown test is a testing apparatus in which subjects knock down a series of mechanical barriers in one of three patterns. The computer system times their reaction and movement time, and the test as a whole provides students with data to study the phenomenon of Contextual Interference. This system was previously controlled by an old computer setup that ultimately crashed. This project recreates the logic and user …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Weight Controlled Electric Skateboard, Zachary Barram, Carson Bertozzi, Vishnu Dodballapur

Computer Engineering

Technology and the way that humans interact is becoming more vital and omnipresent with every passing day. However, human interface device designers suffer from the increasingly popular “designed for me or people like me” syndrome. This design philosophy inherently limits accessibility and usability of technology to those like the designer. This places severe limits of usability to those who are not fully able as well as leaves non-traditional human interface devices unexplored. This project set out to explore a previously uncharted human interface device, on an electric skateboard, and compare it send user experience with industry leading human interface devices.

The Following Robot, Juan D. Cerda, Matthew S. Kwan, Vi M. Le

Computer Engineering

The objective of this project is to design, build, and test an autonomous robot with an associated Android application. The robot uses on board inertial measurement sensors (magnetometer, accelerometer, gyroscope) and coordinates itself through Bluetooth communication with the similar built­in measurement sensors on the Android phone to mimic and follow movement. The Following Robot incorporates the same basic movement functionality as a typical RC car. The robot follows the user’s phone through an application on one’s phone. This application accesses the phone’s accelerometer and gyroscope data and translates into appropriate conversions. Methods of tracking and calculating distance or angular displacement …

Prosense, Johnny Favazza Ii, Casey Glasgow, Matt Epperson

Computer Engineering

This project aims to gather advanced data sets from MEMS sensors and GPS and deliver it to the user, who can capitalize on the data. The once negligible half-degree difference of your board barreling down a wave can be recorded from a gyro and exploited for the perfect turn. The exact speed dreaded by longboarders where speed wobbles turn into a road rash can be analysed and consequently avoided. Ascertaining the summit of your flight using combined GPS sensors from the ski ramp allows for the correct timing of tricks. When it comes to pursuing excellence in professional sports, amateur …

Wireless Mesh Networks For Scada Systems, Zachary Weisman

Computer Engineering

No abstract provided.

Pinpoint: Location Beacon And Tracking, Ezequiel Lopez Iii

Computer Engineering

The purpose of Pinpoint was to create a device that can collect and transmit location information for multiple users on a wireless network. The device would be used to keep track of and communicate with other users nearby. The final design includes a touchscreen display as a graphical user interface (GUI), an XBee RF module for wireless networking, a GPS receiver for location tracking, and a Programmable System on a Chip (PSoC) to control the modules.

Real-Time Digital Effects Processing Using Ios, Jonah W. Clinard

Computer Engineering

In today’s society, we are seeing incredible improvements in terms of creating smaller technological devices that behave more and more like the personal computers of yesterday. Mobile “Smart” devices, in particular, are becoming incredibly powerful not just in terms of processing power, but in the fact that they are able to provide assistance to users in their everyday lives. Application developers are now able utilize the power and size of these devices, to create and realize ideas that would have been previously viewed as impossible. This project applies the fields of digital signal processing, music, and mobile application development, to …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Cnc Torch, Steven Chiu

Computer Engineering

This CNC Torch cuts steel plate. It can cut up to a maximum area of 3x3 feet. The user builds a cut list on the touchscreen from a selection of predefined shapes and enters the parameters need for each shape. When the user is ready, the cut list is sent to an Arduino that will move each motors accordingly to the shapes desired.

Pier Portal Project Ii, Andy Lam, Brian Markwart

Computer Engineering

The goal of this project is to design and build a remotely controllable camera system that will be deployed at the Cal Poly Pier located in Avila Beach. The system is composed of a camera and all of its lighting and movement controlling hardware enclosed into a waterproof acrylic tube, allowing it to be lowered underwater. The camera will stream its video feed onto a website where any user will be able to watch a live video stream from the pod. In addition, users with the correct privileges will be able to remotely control of the camera system via the …

San Luis Obispo Transit Tracker System Back-End Server, Daryl Alan A. Dimalanta

Computer Engineering

This document gives the rationale, design process, technical implementation, testing procedures, and testing results of a back-end server used for the San Luis Obispo (SLO) Transit Tracker System. The SLO Transit Tracker System (SLOTTS) includes client software installed on mobile devices and a back-end server. The purpose of this system is to encourage SLO residents to utilize the transit system by having the client software present current bus location, navigation instructions, and bus schedule in a simple, fast, and easy to use mobile application.

Due to the limited central processing unit (CPU) and limited power supplied by the battery, route …

Characterization Of The Rfx400 For Use In Software Defined Radio, Edward Adams

Computer Engineering

While software defined radio is an extremely flexible technology that is fairly rarely used, as a single purpose radio is much cheaper, it provides an excellent means of learning RF and communications skills through the lens of digital electronics, and it would behoove a Cal Poly student interested in these areas to take on a project in software defined radio. This project aims to lower the barrier to entry for future students to undertake such a project. The use of an up-converter/down-converter is documented for future students to interface with.