Structural Engineering Commons^™

Enhancing Bridge Resilience And Overheight Vehicle Mitigation Through Innovative Sacrificial Cushion Systems, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Transportation departments have made significant strides in addressing the challenges posed by the increasing weights of trucks on bridges. While there is a growing awareness of overheight vehicle collisions with bridges, implementing effective countermeasures remains limited. The susceptibility of bridges to damage from such collisions is on the rise, further exacerbated by unpredictable lateral impact forces. This study employs nonlinear impact analysis to assess the response of an unprotected vehicle-girder model, yielding realistic deformation outcomes comparable to observed impacts on the US-61 bridge. Predictions for a truck traveling at 112.65 km/h indicate deformations of 0.229 m, 0.161 m, and 0.271 …

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

Self-Consolidating Concrete Design For Drilled Shaft Structural Applications, Grady S. Caton

Graduate Theses and Dissertations

Self-consolidating concrete (SCC) is a relatively new concrete technology which allows the concrete to be placed without the need for manual or machine vibration. This innovation reduces labor costs, construction times, and can provide a smooth, finished surface. However, this technology is used in the United States primarily in the precast and prestressed concrete industry. The utility of SCC in structural applications, such as areas of dense reinforcement or locations where complex geometry makes consolidation impossible, is also advantageous. In this study, a series of SCC mixtures were developed both with and without fly ash replacement. These mixtures were then …

Comparing In-Situ Liquefaction Triggering Procedures For Sites In Arkansas, Sagar Barua

Graduate Theses and Dissertations

There currently exists a significant amount of uncertainty when designing piles for bridge foundations in liquefiable soil. Currently ARDOT engineers use a Standard Penetration Test (SPT) based liquefaction spreadsheet developed 10 years ago to evaluate liquefaction triggering. Since this spreadsheet was developed, updates to the liquefaction triggering procedures have been published making the spreadsheet out-of-date. Moreover, additional methods of liquefaction evaluation using cone penetration test (CPT) and shear wave velocity (Vs) provide added means of evaluating liquefaction potential. This thesis updates ARDOT's liquefaction triggering evaluation methodology with the newest procedures and incorporates additional empirical liquefaction hazard estimates such as the …

Modular Composite Sandwich Structures For Thermal And Structural Retrofitting Of Existing Buildings, Marc Al Ghazal

Masters Theses

Around 40% of global energy consumption and 30% of worldwide carbon dioxide (CO2) emissions are attributed to buildings. Most of this consumption is dedicated to ensuring thermal comfort. The goal of this research was to develop and field validate retrofit solutions to improve the energy efficiency of buildings. Exterior cladding panels were designed and tested to ensure adequate thermal and structural performance. Sandwich panels (glass fibers reinforced polymer (GFRP) skins and polymeric foam cores) were fabricated using the vacuum assisted resin transfer molding (VARTM) process. Extruded polystyrene (XPS) and polyurethane (PU) foams were compared as core materials through a series …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Meta-Analysis Of Insulated Concrete Wall Panel Design Methods For Shear And Flexure Behavior, Maryam Al-Bayati

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

Insulated Concrete wall panels have been designed and constructed since the early 1950s with various shear ties, dimensions, and methods; nonetheless, thermal bridging and rational design are still a concern. Many companies have recently developed plastic connectors that have gradually replaced solid concrete sections and steel connectors due to their superior thermal efficiency and strength. However, there is no generally accepted method for predicting the behavior of sandwich wall panels in structural engineering practice or codes, but many methods have been used since the early 1920. This study aims to evaluate the accuracy of current methods for predicting the flexural …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

The Current State Of Practice Of Building Information Modeling, Kevin P. Brooks

Masters Theses

Building Information Modeling (BIM) has become extremely prominent in the construction industry in the past twenty years. It serves as a digital repository that can, when used to its fullest potential, combine all aspects of designing, building, and managing a structure in one place, alongside all the data produced in those processes. The construction industry has to date struggled to increase productivity alongside similar fields, such as the manufacturing industry, though the construction industry generally has far more stakeholders on one project than the manufacturing industry. Further, building designs are becoming more complex while project schedules are becoming tighter. As …

Recent Developments In Timber Design & Its Impact On Carbon Emissions, Raquel Jackson

Spectra Undergraduate Research Journal

This paper explores recent developments in timber building designs and its potential towards reducing carbon emissions. Carbon dioxide emissions are a growing issue worldwide as urbanization and industrialization continues to increase. The rising concentration of carbon dioxide emissions pose significant concerns towards public welfare and environmental health. Despite current methods to reduce greenhouse gasses, carbon emissions remain difficult to reduce from steel and concrete industries. Increasing timber use in building design is a possible solution. Increasing more timber in building design can help reduce carbon emissions due to the carbon-absorbing properties of the construction material. Timber as a construction material …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Floating Offshore Wind Turbine Project, Courtney Huitt, Cormack Williams

Civil and Environmental Engineering

Offshore wind is a developing industry in the Central Coast with the advent of the future offshore wind project planned off the north coast of San Luis Obispo County. This senior design project aligns with the recently leased wind energy project as a detailed study on the structural design, geotechnical design, and construction of a single 14 MW floating offshore wind turbine (FOWT) located 40 km NW of Morro Bay (NOAA buoy 46028). A preliminary design of a spar FOWT is presented in this project as a solution to the rapidly increasing water depth off the coast of Morro Bay, …

Development Of Self-Stressing Ultra High-Performance Concrete Using Expansive Chemical Admixtures, Lane Edwards

Graduate Theses and Dissertations

This study investigated the effects of expansive chemical admixtures on ultra-high performance concrete (UHPC) and self-stressing mechanisms. A literature review was performed to determine different types of expansive admixtures for feasibility of the self-prestressing concept. Ultimately it was decided that type-k cement, made by combining Komponent admixture with conventional UHPC, was the most suitable option due to its effects on wet and hardened concrete properties. Mix designs with varying amounts of Komponent were developed to test the effects the admixture had on various properties. Tested properties included, workability, compressive strength, expansion, short-term shrinkage, long-term shrinkage, and developed prestress. The development …

Additive Manufacturing Of Engineered Cementitious Composites With Ultra-High Tensile Ductility, Amir Bakhshi

Civil Engineering ETDs

One of the critical factors in the development of additive manufacturing in the construction industry is designing suitable materials for 3D printing applications. 3D concrete printing (3DCP) has gained significant attention due to the abundance and availability of concrete. However, concrete is a brittle material and, without proper reinforcement, cannot meet the requirements for structural purposes. Engineered Cementitious Composites (ECC), known for high ductility, and strain-hardening with low fiber contents, can potentially eliminate the need for steel reinforcement in 3D printing without any need for manual placement of reinforcement. A set of systematic tests on ECC mix designs' fresh and …

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

Nondestructive Evaluation Of Structural Defects In Concrete Slabs, Ehsanul Kabir

Electronic Theses and Dissertations

Nondestructive testing (NDT) is a reliable method for determining the structural integrity of new and old construction and understanding the condition of structural defects. It is widely acknowledged that the interpretation of nondestructive evaluation (NDE) has a significant impact on the reliability and consistency of this technology. However, NDT data acquisition remains subjective and heavily dependent on the operator’s knowledge and expertise. As a result, there are still issues to be resolved regarding the imaging and diagnostic procedures for NDT-based concrete inspection. NDT methods such as ground penetrating radar (GPR), and impact-echo (IE), have been extensively used to inspect concrete …

Reduction Of Embodied Carbon In Buildings Through Use Of Low Carbon Strategies And Standardization And Enforcement Of Life Cycle Assessment, Bhargavi Sai Sudhakar

Master's Projects and Capstones

The building and construction industry is energy intensive and as of 2021, this industry is responsible for 37% of the total global greenhouse gas emissions. In previous studies of conventional buildings, the operational energy of a building contributed to 80% and the embodied energy contributed to 20% of the total life cycle energy. With increase in policies and standards that focus on reducing the operational energy, low energy and certified green buildings have emerged where the operational energy has considerably reduced. The relative and absolute share of embodied energy in these energy efficient buildings have increased due to excessive use …

Investigation Of Mechanical Properties Of Recycled Fiber-Reinforced Polymer Composites Reinforcing Cement, Caleb Mull, Fnu Archie, Harry Lee, Guyuan Zhang

Discovery Undergraduate Interdisciplinary Research Internship

The usage of fiber-reinforced polymer composites in various fields has increased significantly due to their advantageous physical and mechanical properties. However, the sustainability of composite parts has not been fully solved for a long time. Most end-of-life (EOL) composite parts have been landfilled without recycling due to the recycling cost and lack of application of recycled composites. Mechanical composite recycling that shred the EOL composite part and reuse it for downgraded applications is one of the most commonly used recycling processes for the EOL composite part. In this research, mechanical composite recycling process was demonstrated for the construction application. The …

Crack Control And Bond Performance Of Alternative Coated Reinforcements In Concrete, Sachin Sreedhara

All Dissertations

Concrete cracking in structures is a ubiquitous problem which can lead to the deterioration of the structure. Other than affecting the strength aspect of a structure, cracking impacts the serviceability criteria as well. Although cracking phenomenon in any structure is highly inevitable, it has to be minimized in order to maintain a structure’s life effectively. Cracking in reinforced concrete structures is related to the bond strength developed between the bar and the concrete. It also depends on an ability of the bar to resist the stresses due to shrinkage to minimize the crack. Another important aspect is the resistance offered …

Contracting Strategies: A Different Approach To Address Long-Term Performance, Maria Calahorra-Jimenez

Mineta Transportation Institute Publications

For cost-efficiency, public safety, and sustainability, improving long-term performance in highway projects is imperative for public administrations. Project delivery and procurement methods provide an opportunity to align design and construction processes with this goal. While previous studies have explored whether project delivery methods impact the long-term performance of highway projects, these studies did not focus on how core elements within project procurement relate to long-term performance. Thus, to fill this gap, this research explores how and to what extent long-term evaluation criteria are considered in design-build best-value procurement of highway projects. To this end, the team conducted content analysis on …

Sage Garden Pavilion Shade Structure, Anthony Razouk Karroum, Manuel Bermudez, Matthew Kilbride, Sarah Holt, Marisa Martineau

Architectural Engineering

Form finding, testing, and construction of funicular double-layered shells in an interdisciplinary format with a focus on designing a shade structure for the San Luis Obispo Botanical Garden Children’s Pavilion. In the process, challenges such as connection design, materiality, storage, and more are explored and refined in relation to shell structures.