Construction Engineering and Management Commons^™

Self-Consolidating Concrete Design For Drilled Shaft Structural Applications, Grady S. Caton

Graduate Theses and Dissertations

Self-consolidating concrete (SCC) is a relatively new concrete technology which allows the concrete to be placed without the need for manual or machine vibration. This innovation reduces labor costs, construction times, and can provide a smooth, finished surface. However, this technology is used in the United States primarily in the precast and prestressed concrete industry. The utility of SCC in structural applications, such as areas of dense reinforcement or locations where complex geometry makes consolidation impossible, is also advantageous. In this study, a series of SCC mixtures were developed both with and without fly ash replacement. These mixtures were then …

Comparing In-Situ Liquefaction Triggering Procedures For Sites In Arkansas, Sagar Barua

Graduate Theses and Dissertations

There currently exists a significant amount of uncertainty when designing piles for bridge foundations in liquefiable soil. Currently ARDOT engineers use a Standard Penetration Test (SPT) based liquefaction spreadsheet developed 10 years ago to evaluate liquefaction triggering. Since this spreadsheet was developed, updates to the liquefaction triggering procedures have been published making the spreadsheet out-of-date. Moreover, additional methods of liquefaction evaluation using cone penetration test (CPT) and shear wave velocity (Vs) provide added means of evaluating liquefaction potential. This thesis updates ARDOT's liquefaction triggering evaluation methodology with the newest procedures and incorporates additional empirical liquefaction hazard estimates such as the …

Development Of Self-Stressing Ultra High-Performance Concrete Using Expansive Chemical Admixtures, Lane Edwards

Graduate Theses and Dissertations

This study investigated the effects of expansive chemical admixtures on ultra-high performance concrete (UHPC) and self-stressing mechanisms. A literature review was performed to determine different types of expansive admixtures for feasibility of the self-prestressing concept. Ultimately it was decided that type-k cement, made by combining Komponent admixture with conventional UHPC, was the most suitable option due to its effects on wet and hardened concrete properties. Mix designs with varying amounts of Komponent were developed to test the effects the admixture had on various properties. Tested properties included, workability, compressive strength, expansion, short-term shrinkage, long-term shrinkage, and developed prestress. The development …

Initial Exploration Of Reduced Gyrations For Arkansas Asphalt Mix Designs, Jocie L. Baker

Graduate Theses and Dissertations

The most common distresses in asphalt pavement are cracking and rutting. These distresses plague almost every asphalt roadway in the world. Finding ways to mitigate these distresses will improve the performance of asphalt pavements. One way to combat the premature cracking of asphalt in the field is to ensure there is enough asphalt binder within the mix. This will help the flexibility of the asphalt undergoing large loads and deformation. However, it is widely accepted that mix designs across the country lack the appropriate amount of asphalt binder in their mixes, causing dry mix designs that are subject to cracking …

Refining Particle Size Specification For Asphalt Emulsion, Pedro Luis Diaz Romero

Graduate Theses and Dissertations

Pavements begin to deteriorate as soon as they are constructed, and traffic is released. The rate at which a pavement deteriorates depends on the material quality, the environment, and the loads carried. To properly preserve pavements and extend their life, various pavement preservation treatments are used. For flexible pavements, a considerable number of these treatments use asphalt emulsion (which are refer to simply emulsions from here on). Emulsions are classified based on their particle charge and reactivity. Emulsions used in chip seals are usually of rapid set reactivity and are classified based on tests over fifty years old.

It has …

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …

An Investigation Of The Flexural Strength And Toughness Of Hybrid Plain And Fiber Reinforced Concrete For Pavement Applications, Wesley Keys

Graduate Theses and Dissertations

For decades, many solutions have been evaluated to combat cracking in concrete pavements. The study presented in this paper evaluates and compares the flexural performance under a third point loading configuration of plain concrete (PC) beams, fully fiber reinforced concrete (FRC) beams, and hybrid PC and FRC beams, with a top PC and bottom FRC layer. The purpose of this hybrid approach was to provide FRC in only half the section, saving cost, while providing a PC surface layer that is easier to finish. All PC top layers were applied at an age of 7-days, considered a reasonable time for …

Shear Strength Of Concrete Beams Made With Belitic Calcium Sulfoaluminate Cement, Caleb W. Chesnut

Graduate Theses and Dissertations

The need for a cleaner alternative to portland cement (PC) concrete has led to increasing interest in alternatives to PC. Structural properties of most of these alternative cements are still an open research topic. One promising alternative cement is belitic calcium sulfoaluminate (BCSA) cement. The study presented in this paper investigated the shear strength, long term compressive strength, and carbonation in BCSA cement and PC concrete beams. A total of twelve eight-foot long beams were made; eight BCSA cement concrete beams and four PC concrete beams to be tested at various ages depending on cement type. Two beams of each …

Improve The Prediction Of Camber, Deflection, And Prestress Losses In Precast, Prestressed Concrete Bridge Girders, Ahmed Ali Hussein Al Mohammedi

Graduate Theses and Dissertations

Many precast, prestressed concrete girders have camber less or higher than the design values. This discrepancy between the design and the actual camber creates construction problems when installing the cast-in-place concrete deck. The objective of this research was to improve the accuracy of estimating long-term camber, deflection, and prestress losses of precast, prestressed concrete girders.

The experimental program consisted of measuring concrete properties and performing field measurements of camber, deflection, and prestress losses for girders in Arkansas. The investigation involved testing nine full-scale girders from two prestressed concrete plants that regularly supply concrete girders to bridge projects in Arkansas. The …

Mitigating Calcium Oxychloride Damage In Cementitious Paste And Concrete Utilizing Supplementary Cementitious Materials, Casey Jones

Graduate Theses and Dissertations

It is understood among engineers in the United States (U.S.) that improvement is needed throughout the transportation infrastructure. In the 2021 Infrastructure Report Card produced by the American Society of Civil Engineers, the roadways of this nation merit a D. This leaves room for improvement in order to provide durable pavements throughout this nation. Areas with significant winter weather may have exacerbated effects in decreased roadway longevity due to freezing/thawing cycles and the use of chemical deicers to mitigate gelid roadway conditions. Much research focuses on surface scaling and reinforcement corrosion using these materials; however, joint deterioration, due to chemical …

Applications Of Masw And Mhvsr Techniques For Infrastructure Evaluation With A Focus On The Effects Of Different Transformation Techniques And Near-Field Effects On Derived Dispersion Data, Salman Rahimi

Graduate Theses and Dissertations

This dissertation is aimed at understanding two aspects of active surface wave methods to improve the accuracy and reliability of this method. These include (1) the performance of four common wavefield transformation methods for the multichannel analysis of surface wave (MASW) data processing and (2) near-field effects. Toward this end, extensive field measurements were conducted considering different factors affecting these two topics. The MASW and microtremor horizontal to vertical spectral ratio (MHVSR) were then employed to examine their efficiency for infrastructure health monitoring.

Regarding the performance of the four common transformation techniques, it was observed that for sites with a …

Frequency Effect On Peak Pressure Coefficients Using The Narrowband Synthesis Random Flow Generator (Nsrfg) Method, Zayuris Del Carmen Atencio Mojica

Graduate Theses and Dissertations

The collapse of the Tacoma Narrows Bridge in Washington state in 1940 due to high wind forces gave structural engineers notice of the importance of understanding the behavior of wind forces on infrastructure. Wind forces play an important role in the design of buildings and other structures. ASCE 7-16 is the manual used for the design of these buildings and other structures throughout the country. These design criteria have been approved based on research projects involving experimental procedures. For the design of wind loads, ASCE 7-16 uses criteria based on wind tunnel (WT) tests. However, since the development of computing …

Development Of An Ultraviolet Absorbance Assay To Estimate Air Entrainer Dosing For Concrete Containing Fly Ash, James Spencer

Graduate Theses and Dissertations

Fly ash is a coal combustion byproduct that can be used as a supplementary cementitious material (SCM) in concrete, offering benefits such as increased workability, durability, and strength. Fly ash can be used as a partial replacement to cement, reducing concrete productions costs and decreasing disposal in landfills. However, variability of fly ash properties (e.g., carbon content, adsorption site density) confounds estimates of the air entraining admixture (AEA) dose needed to achieve a specified air content in concrete. Air entrainment is needed to improve freeze-thaw resistance and limit concrete cracking. The foam index (FI) test is currently used to estimate …

Comparison Of The Resistance Of Belitic Calcium Sulfoaluminate Cement And Portland Cement To Sulfate Attack And Sulfuric Acid, Rilye Dillard

Graduate Theses and Dissertations

Microbially induced corrosion (MIC) is a fairly common concrete deterioration mechanism with many negative effects. MIC is a complex chemical and biological process that occurs in sewage systems and is nearly impossible to replicate in a laboratory setting. For this study, sulfate and sulfuric acid attack on concrete were studied to mimic two stages of the MIC process. The ASTM C1012, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution and a modified ASTM C1012 accelerated method were used to compare the sulfate resistance of belitic calcium sulfoaluminate (BCSA) cement, portland cement (PC), and PC-fly …

Behavior Of Concrete Structures Reinforced With High Strength Steel, Rahman S. Kareem

Graduate Theses and Dissertations

The structural strength and corrosion resistance of concrete members are improved when A1035 steel is used as the main reinforcement. The enhancement of A1035 is achieved by the modification of the composition and microstructure of the steel. Therefore, the behavior of concrete structures reinforced with high-performance steel (A1035) is different from those reinforced with the regular steel (A615). Concrete bridge decks reinforced with different amounts of A1035 were studied in this research program. The structural behavior of twelve concrete bridge decks reinforced with A615 Grade 420 (60 ksi) and A1035 Grade 830 (120 ksi) steel was investigated at both service …

Cement Stabilized Crushed Stone Base Course Strength And Stiffness Analysis, Andrew Deschenes

Graduate Theses and Dissertations

Approximately 70 – 80% of state departments of transportations (DOTs) utilize the 1993 AASTHO Guide for Design of Pavement Structures (1993 AASHTO) [1] for structural design of pavements. A growing portion of DOT’s are beginning to implement the Mechanistic-Empirical Pavement Design Guide (MEPDG), referred to as AASHTOWare Pavement ME [2]. The 1993 AASHTO flexible guide applies empirically derived unitless strength values referred to as structural layer coefficients and structural numbers (SN) to pavement thickness and pavement types. The 1993 AASHTO rigid flexible guide utilizes the depth and strength of the concrete pavement, with the composite spring constant (kc), which is …

Using Bcsa Cement To Repair Waterway Transportation Structures, Anazaria Johanis Ortega Gonzalez

Graduate Theses and Dissertations

Many maritime structures (e.g., locks, dams, ports) in the US are either reaching or are past their design lives, and there are limited funds for the necessary maintenance activities which can lead to repairs that requires closures. These structures are not easy to detour and often require dewatering before repairs can be made, closures can cause delays and business-related losses which can have a large effect on the nation’s economy. Thus, it is advantageous to reduce the repair time for maritime structures. BCSA (belitic calcium sulfoaluminate) cement is a promising material to perform this type of repair due to its …

Seismic Loading Effects Within Orthogonally Connected Steel Lateral Force Resisting Systems, Alhussin Faraj Aliwan

Graduate Theses and Dissertations

Steel buildings located within seismically active regions require special design considerations to ensure public safety and prevent collapse during an extreme seismic event. Two commonly used steel systems are special moment frames (SMFs) and buckling-restrained braced frames (BRBFs). When two seismic systems share a common column in an orthogonal configuration (such as at a building corner), design specifications currently consider a 100+30 rule wherein the shared column is designed for 100% fuse demand in one direction, plus 30% fuse demand from the other direction. While this rule has been shown to be reasonable for elastic building response, a few studies …

Quantifying Workability, Compactability, And Cohesion Gain Of Asphalt Emulsion Cold In-Place Recycling, Sadie Casillas

Graduate Theses and Dissertations

To maximize the life and quality of a pavement, proper maintenance and rehabilitation are essential. Strategies for pavement rehabilitation with many sustainable benefits are pavement recycling. This dissertation focuses on two types of in-situ pavement recycling: Cold in-place recycling (CIR) stabilized with asphalt emulsion and full depth reclamation (FDR) stabilized with asphalt emulsion or foamed asphalt. One white paper (Chapter 2), two accepted peer reviewed journal articles (Chapters 3 and 4), and one submitted peer reviewed journal article (Chapter 5) are presented in this document to create better understanding of the unique material characterization of asphalt emulsion cold recycled materials, …

Verifying The Calcium Oxychloride Threshold In Cementitious Pastes, Fatoumata Traore

Graduate Theses and Dissertations

Calcium oxychloride (CAOXY) formation is a serious deterioration mechanism known to cause joint damage in concrete pavements. CAOXY is the product of a chemical reaction between calcium chloride (CaCl2) or magnesium chloride (MgCl) deicing salts and calcium hydroxide in the cementitious matrix. Currently, the accepted CAOXY threshold at which deterioration is mitigated in cementitious paste is 15 g/100 g paste (15 oz/100 oz paste); however, this limit was developed using flexural strength testing. For this investigation, the current threshold was evaluated using compressive strength and mass change over time in paste specimens exposed to CaCl2. Fly ash is used to …

Examining The Effects Of Reducing The Cement Content Of Portland Cement Concrete Pavement, Bryan Casillas

Graduate Theses and Dissertations

Portland cement is a significant component in a concrete mixture. For concrete used in portland cement concrete pavement (PCCP), the Arkansas Department of Transportation (ARDOT) specifies a minimum cementitious material content of 564 lb/yd3 and a maximum water-cementitious material ratio of 0.45. Prior research conducted at the University of Arkansas, TRC 0603, indicated concrete mixtures used in five bridge decks throughout Arkansas achieved the required 28-day strength at seven days, and the measured compressive strength at 28 days was 30% greater than required. The use of high strength concrete in pavements throughout the state can increase cracking and consequently reduce …

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …

On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez

Graduate Theses and Dissertations

Special Moment Frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs, as they provide lateral system stiffness without the use of braces which often obstruct views and architectural features. Reduced beam section (RBS) connections are popular SMF connection details developed following the Northridge earthquake to limit brittle fractures within connection welds. Current American Institute of Steel Construction (ASIC) provisions (i.e. AISC 341-16) provide prequalified SMF RBS connection details (including welding requirements); however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF RBS connections …

Numerical Simulations Of Spread Foundations Supported On Stone Columns Using The Discrete Element Method, Anibal Enrique Santos Marin

Graduate Theses and Dissertations

The implementation of stone columns as a ground improvement technique has become more popular in geotechnical construction practice as a result of their ability to improve strength, stiffness and permeability characteristics of weak clayey soil deposits. There are several analytical and empirical approaches to estimate the bearing capacity of stone column foundation systems; however, there is notable variation in the performance of these existing methods when compared with full-scale experimental results. For very weak cohesive soils (i.e., undrained shear strength less than 15 kPa), the use of conventional stone columns becomes restricted because of the insufficient confinement that these types …

Numerically Modeling Steel Continuous Bridges For Early Age Concrete Deck Cracking, Abdul Aziz Nabil Salah

Graduate Theses and Dissertations

Early age bridge deck cracking is a common problem throughout the United States. Early age cracking develops shortly after the deck is poured. It reduces the serviceability and lifespan of bridges. Early age cracking can be typically attributed to either of two factors, 1) construction practices, and 2) shrinkage. The Arkansas Department of Transportation (ARDOT) has experienced early age bridge deck cracking. ARDOT currently specifies a sequence deck pour on most of their bridges; however, contractors prefer continuous deck pours because of ease and construction time. During the period of this TRC1903 research project, ARDOT has only approved a few …

Best Practices For Asphalt Emulsion Particle Size Analyses Using A Coulter Counter, Logan P. Kiihnl

Graduate Theses and Dissertations

As asphalt pavements develop distresses, pavement preservation, maintenance, and rehabilitation treatments are used to mitigate distresses and extend the life of the pavement. Many of these treatments utilize asphalt emulsion. Previous research has linked particle size to material properties including viscosity and storage stability. General statements have also been made about particle size influencing emulsion performance while other researchers have identified a trend between particle size and prime coat penetration. Even though literature discusses the importance of particle size, there is little guidance on the best practices of asphalt emulsion particle size analyses, specifically with a Coulter counter.

Data collected …

Evaluation Of Fracture Principles In Asphalt Concrete Utilizing The Sc(B) Geometry, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Since cracking is one of the principal distresses to be considered in asphalt concrete, multiple fracture tests and geometries have been used to quantify cracking resistance. One of the most popular geometries that have been used in fracture tests is the Semi-Circular bend (SC(B)). However, for this geometry, most of the fracture test methods use different parameters such as thickness, testing temperatures, and loading rates. Thus, the purpose of this research was first to evaluate fracture energy by performing a ruggedness test based on ASTM E1169. Then, to apply fracture mechanics concepts to evaluate three specimen thicknesses (25, 50, and …

Evaluation Of Concrete Deck Curing Regimens Using Capillary Pressure Sensing System, Samuel Spann

Graduate Theses and Dissertations

Early-age plastic shrinkage cracking is a common problem with the construction of concrete bridge decks due to the high surface area-to-volume ratio and exposure to potentially detrimental environmental effects. Curing regimens are utilized to mitigate cracking risk during the plastic stage of the concrete; the curing regimens evaluated for this study were wet burlap-polyethylene sheeting, two acrylic curing compounds, and one lithium compound. Capillary pressure in the water filled pores has been shown to correlate to the plastic shrinkage cracking risk of concrete. A new portable system has been developed to measure the capillary pressure that could potentially be used …

Study Of Internal Strains Developed In Concrete Decks At Early Ages In Steel Continuous Bridges, Fernando R. Benitez Ortiz

Graduate Theses and Dissertations

The Arkansas Department of Transportation (ARDOT) has identified bridge deck cracking shortly after concrete decks are placed and prior to applying traffic loads. Previous researchers have confirmed improper construction practices and design methods can lead to deck cracking. Currently, many contractors throughout Arkansas are using continuous deck pours. This construction approach may restrict the concrete slab from movement during early age shrinkage, causing tensile stresses to develop. The final stresses at the end of construction must be lower than the concrete tensile strength, if not cracking issues will develop. Eventually, these cracks may enlarge due to service load stresses and …

The Development Of Initial Asphalt Mixture Acceptance Criteria Using The Scb Test And The I-Fit Test, Nathan Delman Parnell

Graduate Theses and Dissertations

Cracking has become the primary asphalt pavement distress in Arkansas. Arkansas along with other states have implemented a test to measure rutting resistance. This paper presents research to implement a cracking resistance test to further modify the Superpave volumetric asphalt mixture design method in Arkansas. The Illinois Flexibility Index Test (I-FIT) was the test chosen to analyze for this research. Two aging methods were tested, a short term oven aging (AASHTO R30 ST) and a long term oven aging (NCAT) method. Six asphalt mixtures were selected to be tested. The mixtures testes were recreated from Arkansas Department of Transportation (ARDOT) …