Biomedical Engineering and Bioengineering Commons^™

Using Mathematical Modeling To Unmask The Concealed Nature Of Long Qt-3 Syndrome, Steven Poelzing, Amara Greer-Short, Seth H. Weinberg

Biology and Medicine Through Mathematics Conference

No abstract provided.

Pressure Relationships Of Inspired Air Into The Human Lung Bifurcations, Parya Aghasafari, Israr Ibrahim, Ramana Pidaparti

Biology and Medicine Through Mathematics Conference

No abstract provided.

Characterization Of Fibrin Matrix Incorporated Electrospun Polycaprolactone Scaffold, Cho Yi Wong

Theses and Dissertations

Specific objective: Guided tissue regeneration (GTR) aims to regenerate the lost attachment apparatus caused by periodontal disease through the use of a barrier membrane. For the GTR procedures to be successful, barrier membranes are required to be present at the surgical site for an extended period of time (weeks to months). Synthetic membranes have the advantage of prolonged presence in a wound site; however, they do not actively contribute to wound healing. Biologic membranes are recognized by the host tissue and participate in wound healing but have the disadvantage of early resorption. Therefore, the goal of this study is …

A Computational Study Of Curvature In The Outflow Graft Of A Continuous Flow Left Ventricular Assist Device, Laura Patterson

Theses and Dissertations

Left ventricular assist devices (LVADs) are an increasingly utilized therapy for end-stage heart failure. Thrombosis within the graft from the pump to the aorta has been documented, but is poorly researched. This study examines the effect of graft geometry, as measured by radius of curvature, bend angle, and diameter, on thrombogenic flow patterns within the graft for a range of flow conditions. It also examines the effect blood properties, including viscosity and density, on these flow patterns. The results indicated that radius of curvature had a powerful effect on thrombogenic flow patterns. Flowrate and bend angle were also influential. The …

Role Of E-Cadherin Force In The Spatial Regulation Of Cell Proliferation, Abhinav Mohan

Theses and Dissertations

Cell proliferation and contact inhibition play a major role in maintaining epithelial cell homeostasis. A hallmark of epithelial cells is strong cell-cell junctions. These junctions include E-Cadherin, a type of adherens junction that is critical for both barrier function and contact inhibition. Prior experiments by other groups have shown that adherens junctions are subject to mechanical tension. Externally applied forces (e.g. stretch) results in changes in E-Cadherin forces that coordinate proliferation. My current work tests the hypothesis that E-Cadherin forces mediate the spatial regulation of cell proliferation even in the absence of externally applied forces.

Small Animal Thermal Support Device: Thermoregulation System For Scireq Flexivent Chamber, Alexander Dickey, Ashkhan Hojati, Matthew James, Kathleen Vermillera

Capstone Design Expo Posters

During ventilation induced lung injury (VILI) experiments, anesthetized mice lose the ability to regulate their core body temperature. Without maintaining homeostasis, the experimental data may be compromised due to changes in the rodent’s internal functions. Traditional heating techniques utilize a water circulation heating system that is unable to fit inside flexiVent ventilator testing chambers. The objective of this project is to design and build an automatic thermoregulatory feedback system to regulate the core body temperature of a mouse inside individual testing chambers throughout the duration of the experiment. The project deliverables include a functioning prototype that achieves safe and effective …

Low Cost Sterilization, Karima Abutaleb, Mahreen Azam, Eric Lara, Sarah Tracy

Capstone Design Expo Posters

The lack of proper surgical tool sterilization is an increasing issue in developing countries. Inadequate sterilization leads to disease transmission, infection and even death. While autoclaves, the current golden standard for sterilization, are effective, they are often rendered useless after breaking as the cost to repair and maintain them is incredibly high. This leads to the dependence on insufficient techniques such as the use of diluted bleach. Diluted bleach, while effective for disinfection, leads to the destruction of surgical tools over time, does not destroy spores, and is unsustainable, as it loses potency over time which leads to its otherwiseunnecessary …

Pulmonary Patency Stent, Kranthidhar Bathula, Suraj Kandalam, Akhil Kolluri, Roshni Malik

Capstone Design Expo Posters

Patients with malignancies in the central airways often experience significant breathing difficulties due to occlusion of the airways. One common palliative treatment option for this is a stent placement procedure. While patients often experience immediate symptom relief, long term use can result in the formation of granulation tissue, causing restenosis of the airway. The objective of this project is to design and prototype a modification to the Boston Scientific Ultraflex partially-covered stent in order to reduce granulation tissue and maintain airway patency. Deliverables include the detailed design, a working prototype, and supporting data. The main product specifications include effectiveness in …

Design Of A Drug Delivery System Through The Gastrointestinal Tract, Kaixin Chen, Adel Husayni, Kayvon Mobarakeh, Ankit Soni

Capstone Design Expo Posters

Alzheimer’s Disease (AD) afflicts an estimated 5.3 million individuals and is the sixth leading cause of death in America. The drug delivery method of interest is an orally administered sustained-release delivery system that addresses the needs of the associated patient population. By augmenting drug delivery with a higher effective payload per dose compared to current methods, drug efficacy and bioavailability would improve. This will result in a decrease of the overall cost for medication as a greater percentage of the administered drug will be viable.

This design addresses the release of AD drug from the drug delivery system at the …

Catheter Attachment Device For Prevention Of Urinary Tract Infection, Ashleigh Mccormick, Brittany Allen, Karolina Stumbraite, Kevin Ball

Capstone Design Expo Posters

Hospital-acquired infections are costly occurrences that cause patients physical discomfort, have dangerous immune consequences, and cost healthcare providers hundreds of millions of dollars every year in liability fees and negligence charges. Catheter associated urinary tract infections (CAUTI) are the most common class of hospital-acquired infection, affecting over half a million patients in U.S. hospitals alone every year.The CAUTI-Guard team has designed a silver-coated polydimethylsiloxane (PDMS) plug device that helps prevent CAUTI through its action as a physical and chemical block. The device slides along standard urinary catheters and helps block the migration of infectious material into the urethra and subsequently …

Suture Trainer: Improving Tissue Handling Technique, Albara Elshaer, Sindora Baddam, Veronica Peterkin, Millie Shah

Capstone Design Expo Posters

Tissue handling is fundamental to performing mechanical tasks of suturing and surgery on live humans and animals. While the mechanics of suturing can be taught, there is no available simulation product designed to specifically teach tissue handling skills. It is important as a future medical professional to gain better tissue handling skills in order to prevent unnecessary injury to the tissue via scarring. The suture trainer focuses on providing feedback in order to standardize tissue handling technique in order to prevent poor habits from developing. Our project deliverables included a model, working prototype, and test data collected from practicing physicians …

A Tilting System For Powered Wheelchairs, Liam Cornwall, Brandon Heath, Justin Mcdaniel, Alexander Stevenson

Capstone Design Expo Posters

The objective of our project is to create a wheelchair platform that can tilt a power wheelchair and its user back into a nearhorizontal position. The purpose of this is to allow a dentist to work on the patient in the manner and position with which they are most accustomed.

The device currently used by our sponsor, The Virginia Home, is the Versatilt platform. The Versatilt is capable of lifting a maximum weight of 750 lbs. and tilting patients back, up to 65 degrees. However, the platform is too small to accept the power wheelchairs used by the majority of …

Mri Hip Joint Traction Device, Rawan Alfadly, Carla Gomez, Sara Um

Capstone Design Expo Posters

Radiologists commonly use contrast agents to improve resolution and acuity when employing MRI (Magnetic Resonance Imaging). Introducing MRI contrast agents to the tissue in the innermost part of the femoroacetabular joint is extremely difficult because the anatomy prevents the contrast agents from infiltrating those surfaces. Therefore, getting the ideal image resolution and making diagnosis of the hip is difficult. The objective was to design a product that would successfully distract one hip joint while also stabilizing the patient’s pelvis to improve visualization so that physicians are able to better diagnose the hip. The deliverables included a preliminary model that illustrates …

Iv Pole For Cardiac Surgery, Sindhu Marampudi, Natalie Noll, Madison Nowak, Rachel Wilbur

Capstone Design Expo Posters

IV lines and pumps need to be transported from the operating room to patient recovery with the patient after cardiac procedures. During this process, the weight of the IV pumps and the small wheels on the IV pole can cause the IV pole to become unbalanced and fall or bend due to the load. Due to a decrease in slack in IV lines to minimize IV line tangling, when an IV pole falls, this can result in the IV lines being torn out of the patient that can lead to blood loss and other injuries. In addition, IV bags and …

Marsupialization Catheter, Hamdi Abdeen, Ananya Mishra, Lucas Olson, Jacqueline Pinderski

Capstone Design Expo Posters

A significant issue among oral and maxillofacial surgeons is the treatment of cysts within the jaw. Cysts develop at random and in most cases asymptomatically. Therefore, they may reach enormous sizes before being diagnosed. Large cysts can cause severe damage to teeth and the surrounding bone. Doctors treat small cysts by surgically removing them. However, this approach is not ideal for large cysts due to the risk of surgical complications, the high expenses incurred, and the fact that it is often undesired by the patient. Current treatments include surgically opening the cyst and either suturing the tissue open or placing …

Sensing Movement In Endotracheal Tubes, Mary Anisa Kannan, Krista Powell, Navami Ravindra, Tiffany Wong

Capstone Design Expo Posters

The objective of this project was to develop a device that would better secure endotracheal tubes (ETT), measure unwanted displacement, and notify caretakers when a dangerous amount of displacement has occurred. The project deliverables were as follows: a detailed design, a prototype, and a final demonstration of the prototype which shows successful ability to carry out the objectives stated above. The device needs to be small in size, expensive, flexible to allow for regular cleaning, yet strong enough to withstand stress. The final design consists of a small bite block holder and head straps to secure the device. The device …

Improved Device For Passive Foot Dorsiflexion For Prevention Of Dvt, Stephen Vinoba, Nigal Shah, Shreya Vatsala, Jawahar Baddula

Capstone Design Expo Posters

Postoperative patients are often too fatigued to walk around and often lay in bed for extended periods of time. This could lead to the development of deep vein thrombosis (DVT). DVT is a condition where blood accumulates in the veins instead of being pushed back to the heart. This can cause the formation of blood clots that can eventually lead to pulmonary embolism resulting in death. DVT is a condition that affects about 900,000 people in the United States. Since it is such a prevalent condition, it is important to develop methods of prevention for this condition.

The aim of …

Prediction Device To Reduce Falls In The Elderly, Keegan Zacharie, Aaron Corbin, Joseph Switzer

Capstone Design Expo Posters

Complications arising from accidental falls are one of the leading causes of death among the elderly, with over 25,000 fatalities annually in the U.S.; a third of the elder population falls each year and a fifth of falls cause serious injury. We intended to mitigate these risks by producing a device capable of anticipating falls using biostatistical data.

Deliverables for our design included: An integrated accelerometer and pulse monitor to assess changes in motion and the physiological state of the wearer, a programmed algorithm capable of processing this data, and a mount to attach components to the patient.

Our constraints …

Minimizing Loss Of Balance And Falls With Personal Walkers, Michael Berger, Galen Kellner, David Le, Anthony Renninger

Capstone Design Expo Posters

Falls within the Older Adult community lead to roughly 734,000 hospital admissions annually with 87% attributed to walker use. In order to reduce the amount of falls due to walker use our objective was to create a system that detects an increased likelihood of a fall occurring, notifies the user of improper positioning, and can intervene by application of an automatic braking system to stabilize the walker; effectively training the user to have a more proper walking form and posture reducing the risk of a fall. In order to accomplish this goal, final deliverables included a working prototype and validation …

Novel Osteogenic Ti-6al-4v Device For Restoration Of Dental Function In Patients With Large Bone Deficiencies: Design, Development And Implementation, David J. Cohen, A Cheng, A. Kahn, M. Aviram, Alexander J. Whitehead, Sharon Hyzy, Ryan M. Clohessy, Barbara D. Boyan, Zvi Schwartz

Biomedical Engineering Publications

Custom devices supporting bone regeneration and implant placement are needed for edentulous patients with large mandibular deficiencies where endosteal implantation is not possible. We developed a novel subperiosteal titanium-aluminum-vanadium bone onlay device produced by additive manufacturing (AM) and post-fabrication osteogenic micro-/nano-scale surface texture modification. Human osteoblasts produced osteogenic and angiogenic factors when grown on laser-sintered nano-/micro-textured surfaces compared to smooth surfaces. Surface-processed constructs caused higher bone-to-implant contact, vertical bone growth into disk pores (microCT and histomorphometry), and mechanical pull-out force at 5 and 10 w on rat calvaria compared to non surface-modified constructs, even when pre-treating the bone to stimulate …

24r,25-Dihydroxyvitamin D3 Protects Against Articular Cartilage Damage Following Anterior Cruciate Ligament Transection In Male Rats, Barbara D. Boyan, Sharon L. Hyzy, Qingfen Pan, Kayla M. Scott, Richard D. Coutts, Robert Healey, Zvi Schwartz

Biomedical Engineering Publications

Osteoarthritis (OA) in humans is associated with low circulating 25-hydroxyvitamin D3 [25 (OH)D3]. In vitamin D replete rats, radiolabeled 24R,25-dihydroxyvitamin D3 [24R,25 (OH)2D3] accumulates in articular cartilage following injection of [3 H]-25(OH)D3. Previously, we showed that 24R,25(OH)2D3 blocks chondrocyte apoptosis via phospholipase D and p53, suggesting a role for 24R,25(OH)2D3 in maintaining cartilage health. We examined the ability of 24R,25(OH)2D3 to prevent degenerative changes in articular cartilage in an OAlike environment and the potential mechanisms involved. In vitro, rat articular chondrocytes were treated with IL-1β with and without 24R,25(OH)2D3 or 1α,25(OH)2D3. 24R,25(OH)2D3 but not 1α,25(OH)2D3 blocked the effects of IL-1β …

Mechanical Loading Attenuates Radiation-Induced Bone Loss In Bone Marrow Transplanted Mice, Peter M. Govey, Yue Zhang, Henry J. Donahue

Biomedical Engineering Publications

Exposure of bone to ionizing radiation, as occurs during radiotherapy for some localized malignancies and blood or bone marrow cancers, as well as during space travel, incites dose-dependent bone morbidity and increased fracture risk. Rapid trabecular and endosteal bone loss reflects acutely increased osteoclastic resorption as well as decreased bone formation due to depletion of osteoprogenitors. Because of this dysregulation of bone turnover, bone’s capacity to respond to a mechanical loading stimulus in the aftermath of irradiation is unknown. We employed a mouse model of total body irradiation and bone marrow transplantation simulating treatment of hematologic cancers, hypothesizing that compression …

The Role Of E-Cadherin Force In The Maintenance Of Homeostasis In Epithelial Acini, Fnu Vani Narayanan

Theses and Dissertations

Numerous three-dimensional model systems have emerged for emulating the biochemical and physiological states of native tissue. Yet little is known about the effects of mechanical forces on cell behavior in the context of an organized tissue structure in three-dimensional cell-culture. Epithelial cells cultured in a three-dimensional environment comprised of extracellular matrix proteins form spheroids of polarized cells. Cellular responses to mechanical cues, generated from dynamic interactions with the extracellular matrix and neighboring cells, are known to influence cellular behavior to a great extent. Previous studies have shown that tumorigenic progression has been frequently linked to the down regulation of E-cadherin, …

In-House Fabrication Of Multi-Sized Polystyrene Microcarriers For Neural Stem Cell Expansion, Jessica Forrester

Theses and Dissertations

The clinical demand for neural stem cells drives the need for a reproducible method used to generate a large quantity of well-characterized cells to support regenerative therapies. Microcarriers are currently being used as a scaffold for stem cell culture to aid in this expansion process because they provide a larger surface area while also requiring fewer cell passages compared to monolayer culture. The main objective of this project was to investigate how human neural stem cell attachment, proliferation, and multipotency would respond to three-dimensional (3D) culture using peptide-coated microcarriers of varying diameters. In this study, multi-sized polystyrene microcarriers were fabricated …

Novel Small Airway Model Using Electrospun Decellularized Lung Extracellular Matrix, Bethany M. Young

Theses and Dissertations

Chronic respiratory diseases affects many people worldwide with little known about the mechanisms diving the pathology, making it difficult to find a cure. Improving the understanding of smooth muscle and extracellular matrix (ECM) interaction is key to developing a remedy to this leading cause of death. With currently no relevant or controllable in vivo or in vitro model to investigate diseased and normal interactions of small airway components, the development of a physiologically relevant in vitro model with comparable cell attachment, signaling, and organization is necessary to develop new treatments for airway disease. The goal of this study is to …

Development And Characterization Of Lung Derived Extracellular Matrix Hydrogels, Robert A. Pouliot

Theses and Dissertations

Chronic obstructive pulmonary disease (COPD) including emphysema is a devastating condition, increasing in prevalence in the US and worldwide. There remains no cure for COPD, rather only symptomatic treatments. Due to unique challenges of the lung, translation of therapies for acute lung injury to target chronic lung diseases like COPD has not been successful. We have been investigating lung derived extracellular matrix (ECM) hydrogels as a novel approach for delivery of cellular therapies to the pulmonary system.

During the course of this work we have developed and characterized a lug derived ECM hydrogel that exhibits “injectability,” allowing cells or dugs …

An Investigation Of Kinetic Visual Biofeedback On Dynamic Stance Symmetry, Trisha J. Massenzo

Theses and Dissertations

The intent of the following research is to utilize task-specific, constraint-induced therapies and apply towards dynamic training for symmetrical balance. Modifications to an elliptical trainer were made to both measure weight distributions during dynamic stance as well as provide kinetic biofeedback through a man-machine interface. Following a review of the background, which includes research from several decades that are seminal to current studies, a design review is discussed to cover the design of the modified elliptical (Chapter 2).

An initial study was conducted in a healthy sample population in order to determine the best visual biofeedback representation by comparing different …

The Molecular And Mechanical Mechanisms Of The Age-Associated Increase In The Severity Of Experimental Ventilator Induced Lung Injury, Joseph Ames Herbert

Theses and Dissertations

Abstract

Background

The majority of patients requiring mechanical ventilation are over the age of 65 and advanced age is known to increase the severity of ventilator-induced lung injury (VILI) and mortality. However, the mechanisms which predispose aging ventilator patients to increased mortality rates are not fully understood.

Pulmonary edema is a hallmark of VILI and the severity of edema increases with age. Ventilation with conservative fluid management decreases mortality rates in acute respiratory distress (ARDS) patients, but has not been investigated in VILI. We hypothesized that age-associated increases in pulmonary edema promote age-related increases in ventilator-associated mortality. Endoplasmic reticulum (ER) …

Providing Support For An Interdisciplinary Research Group With A Multidisciplinary Informationist Team: Is It Effective?, Margaret Henderson, Karen Gau, Julie A. Arendt, Martha Roseberry, John Cyrus

VCU Libraries Faculty and Staff Presentations

Background

Three subject librarians and a data librarian, representing three departments and two libraries at a university, were awarded an NLM Informationist Supplement to support an interdisciplinary Research Group with an NIH grant. The Informationist Team developed a model to utilize the skills of multiple librarians to support the increasing number of interdisciplinary and interprofessional research groups at the university. Librarians routinely attended lab meetings and shared notes with each other to monitor researcher needs.

Methods

The Informationist Team regularly provided support for literature searches, creating search alerts, bibliographic citation management and sharing, and data management to an interdisciplinary Research …

Improved Capability Of A Computational Foot/Ankle Model Using Artificial Neural Networks, Ruchi D. Chande

Theses and Dissertations

Computational joint models provide insight into the biomechanical function of human joints. Through both deformable and rigid body modeling, the structure-function relationship governing joint behavior is better understood, and subsequently, knowledge regarding normal, diseased, and/or injured function is garnered. Given the utility of these computational models, it is imperative to supply them with appropriate inputs such that model function is representative of true joint function. In these models, Magnetic Resonance Imaging (MRI) or Computerized Tomography (CT) scans and literature inform the bony anatomy and mechanical properties of muscle and ligamentous tissues, respectively. In the case of the latter, literature reports …