Biomedical Engineering and Bioengineering Commons^™

Characterization Of Molecular Communication Based On Cell Metabolism Through Mutual Information And Flux Balance Analysis, Zahmeeth Sayed Sakkaff

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Synthetic biology is providing novel tools to engineer cells and access the basis of their molecular information processing, including their communication channels based on chemical reactions and molecule exchange. Molecular communication is a discipline in communication engineering that studies these types of communications and ways to exploit them for novel purposes, such as the development of ubiquitous and heterogeneous communication networks to interconnect biological cells with nano and biotechnology-enabled devices, i.e., the Internet of Bio-Nano Things. One major problem in realizing these goals stands in the development of reliable techniques to control the engineered cells and their behavior from the …

Hollow Fiber Membranes For Artificial Lung Applications, Lauren Reed

Chemical Engineering Undergraduate Honors Theses

Artificial lungs are in use, but difficult issues remain in the field of membrane development related to fouling issues. Currently there are external artificial lungs circulating blood outside the body, taking out the carbon dioxide, and inserting oxygenated blood back into the body. An example of this type of machine is the ExtraCorporeal Membrane Oxygenation (ECMO) machine currently used in hospitals. The ECMO takes over the functions for both the lungs and the heart but is only available for short term use by patients with respiratory failure due to infections [1]. The fibers in the machine develop fouling due to …

Biopolymer Electrospun Nanofiber Mats To Inactivate And Remove Bacteria, Katrina Ann Rieger

Doctoral Dissertations

The persistence of antibiotic resistance in bacterial pathogens remains a primary concern for immunocompromised and critically-ill hospital patients. Hospital associated infections can be deadly and reduce the successes of medical advancements, such as, cancer therapies and medical implants. Thus, it is imperative to develop materials that can (i) deliver new antibiotics with accuracy, as well as (ii) uptake pathogenic microbes. In this work, we will demonstrate that electrospun nanofiber mats offer a promising platform for both of these objectives because of their high surface-to-volume ratio, interconnected high porosity, gas permeability, and ability to contour to virtually any surface. To provide …

Extracellular Matrix Control Of Breast Cancer Metastasis And Dormancy, Lauren Barney

Doctoral Dissertations

To metastasize, a cell must travel through circulation to a secondary tissue, and this process causes 90% of all cancer deaths. Although inefficient, metastasis is not random, and only capable seeds in hospitable soils are capable of outgrowing into detectable metastases. The overall hypothesis in this work is that the secondary tissue microenvironment, particularly the extracellular matrix (ECM), mediates metastasis. We posit that the ability of metastatic cells to survive dormancy, exit quiescence, and colonize a tissue depends upon the ability of the soil to sustain survival, and subsequently trigger outgrowth. We created a simple biomaterial platform with systematic control …

Biomarker Detection At Risk Forecasting Level Using Metal-Enhanced Fluorescence Combined With Surface Acoustic Wave, Jun Liu

USF Tampa Graduate Theses and Dissertations

In this paper, metal-enhanced fluorescence (MEF) technique is used to lower the detection limit of carcinoembryonic antigen (CEA) which is able to be utilized in forecasting the risk of having certain kinds of cancers, especially colon and rectal cancer. By incubating silver nanocubes (Ag NCs) on the surface of the chips, the detection limit goes down to below 1ng/mL of CEA. Also, when combining MEF with surface acoustic wave (SAW) devices, the incubation time between antigen and antibody will decrease significantly with the fluorescence signal keeping similar or higher level.

Recent Approaches In Designing Bioadhesive Materials Inspired By Mussel Adhesive Protein, Pegah Kord Forooshani, Bruce P. Lee

Department of Biomedical Engineering Publications

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhe-sion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized poly- mers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface …

Subcellular And In-Vivo Nano-Endoscopy, Surya Venkatasekhar Cheemalapati, John Winskas, Hao Wang, Karthik Konnaiyan, Arseny Zhdanov, Alison Roth, Swamy Rakesh Adapa, Andrew Deonarine, Rays H. Y. Jiang, Anna Pyayt

Chemical, Biological and Materials Engineering Faculty Publications

Analysis of individual cells at the subcellular level is important for understanding diseases and accelerating drug discovery. Nanoscale endoscopes allow minimally invasive probing of individual cell interiors. Several such instruments have been presented previously, but they are either too complex to fabricate or require sophisticated external detectors because of low signal collection efficiency. Here we present a nanoendoscope that can locally excite fluorescence in labelled cell organelles and collect the emitted signal for spectral analysis. Finite Difference Time Domain (FDTD) simulations have shown that with an optimized nanoendoscope taper profile, the light emission and collection was localized within ~100 nm. …

Materials And Techniques Used In Cranioplasty Fixation: A Review, Basel A. Khader, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Cranioplasty is the surgical repair of a deficiency or deformity of the skull. The purpose of cranioplasty is to provide protection for the brain following cranial surgery, and to offer relief to psychological disadvantages while increasing social performance. There are several materials that had been used for cranioplasty, but an ideal product has yet to be developed, hence the ongoing research into biologic and non-biologic alternatives to the existing materials. This article critiques the products currently used for cranioplasty in order to facilitate the development of new materials, which can improve patient outcomes.

Methanol And Dimethyl Ether From Renewable Hydrogen And Carbon Dioxide: Alternative Fuels Production And Life-Cycle Assessment, Michael J. Matzen, Yaşar Demirel

Yasar Demirel Publications

In this work we investigate two renewably based alternative fuels; methanol and dimethyl ether. The ultimate feedstocks for production are wind-based electrolytic hydrogen and carbon dioxide captured from an ethanol fermentation process. Dimethyl ether production was modeled in ASPEN Plus using a previously simulated methanol production facility. The facilities use 18.6 metric tons (mt) of H₂ and 138.4 mt CO₂ per day. Methanol is produced at a rate 96.7 mt/day (99.5 wt%) and dimethyl ether is produced at a rate of 68.5 mt/day (99.6 wt%). A full comparative life-cycle assessment (cradle-to-grave) of both fuels was conducted to investigate …

Controlled Delivery Of Angiogenic And Arteriogenic Growth Factors From Biodegradable Poly(Ester Amide) Electrospun Fibers For Therapeutic Angiogenesis, Somiraa S. Said

Electronic Thesis and Dissertation Repository

Therapeutic angiogenesis relies on the delivery of exogenous growth factors to stimulate neovessel formation. However, systemic administration of angiogenic factors results in rapid clearance from the site of interest due to their short biological half-life. In this work, we are reporting controlled delivery of a ‘cocktail’ of growth factors, an angiogenic factor −fibroblast growth factor-2 (FGF2), and an arteriogenic factor −fibroblast growth factor-9 (FGF9), from biodegradable poly(ester amide) (PEA) electrospun fibers towards targeting neovascular formation and maturation. FGF2 and FGF9 were dual loaded into PEA fibers using a mixed blend and emulsion electrospinning technique. Matrigel tube formation and Boyden chamber …

Fermentative Processes Requiring Low Solubility Feed Gases: An Investigation Into Gas-Dependent Microorganisms, Eric W. Doerr

Electronic Thesis and Dissertation Repository

Two bioprocesses were separately investigated based on their common interest of using gaseous substrates that have low solubility. The first process involved the development of a mixed culture using two organisms capable of utilizing glycerol and carbon monoxide separately to increase biobutanol production, while the second process involved an investigation of different production media used in aerobic xanthan production of Xanthomonas campestris with pressurization effects. It was determined that Clostridium pasteurianum should be used with an organism like Clostridium carboxidivorans or Eubacterium limosum in order for butyrate uptake at 3 g/L to occur with a minimum 0.1 g/L butyrate production. …

Alginate Hydrogels As Three-Dimensional Scaffolds For In Vitro Culture Models Of Growth Plate Cartilage Development And Porcine Embryo Elongation, Taylor D. Laughlin

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The establishment of in vitro culture models utilizes tissue engineering principles to design functional mimics of in vivo environments in vitro. Advantages for the use of in vitro culture models include ethical alleviation of animal models for therapeutic testing, cost efficiency, and a greater ability to study specific mechanisms via a systematic, ground-up approach to development. In this thesis, alginate hydrogels are utilized in the development of in vitro culture models of porcine embryo elongation and growth plate cartilage development. First, the effect of scaffold and modifications to the scaffold were explored in both projects. In order to modulate …

Bioengineered Platforms To Study Carcinoma Cell Response To Drug Treatment, Thuy V. Nguyen

Doctoral Dissertations

The tumor extracellular matrix (ECM) plays an important role in facilitating tumor growth and mediating tumor cells' resistance to drugs. However, during drug development, potential chemotherapeutics are screened in plastic plates, which lack relevant ECM physicochemical cues. In order to improve drug development process, this dissertation includes the development of relevant 2D and 3D biomaterial systems that can be used to study carcinoma cell response to drug treatment. A novel poly(ethylene glycol)-phosphorylcholine (PEG-PC) high-throughput biomaterial platform was developed to study how the ECM mechanochemical properties affect cancer cells' response to drug. The PEG-PC biomaterial is optically transparent, has a mechanical …

Structure And Dynamics Of Charged Colloidal Disks In Colloid-Polymer Mixtures, Suhasini Kishore

Doctoral Dissertations

Complex fluid mixtures of colloids and polymers are extensively used in several conventional and emerging technological applications. Particles self-assemble under different conditions to form colloidal glasses and gels and it often leads to the development of unusual viscoelastic features. In the case of aspherical particles, shape anisotropy and physical aging effects add to the existing complexities so the implementation of a strategic formulation method to improve performance and stability remains a critical challenge. This thesis presents a comprehensive analysis of particle interactions in mixtures of charged disk-shaped colloids and weakly-adsorbing polymers like poly(ethylene oxide) (PEO). Here, we discuss the behavior …

Hydrothermal Synthesis And Characterisation Of Bioactive Glass-Ceramic Nanorods, Ehsan Zeimaran, Sara Pourshahrestani, Seyed Farid Seyed Shirazi, Belinda Pingguan-Murphy, Nahrizul Adib Kadri, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study fabrication of rod-like bioactive glass-ceramics (BGCs) using hydrothermal treatment based on a sol-gel precursor is reported for the first time. BGCs with composition 58 wt% SiO₂, 33 wt% CaO and 9 wt% P₂O₅ were synthesized in different thermal conditions (200 and 220 °C) and characterised with regard to morphology, chemical composition and crystallinity. The bioactivity of the materials was assessed by immersion in simulated body fluid for up to 7 days. The results revealed that as the reaction temperature increased from 200 to 220 °C, the diameter of rods was reduced from …

Raman Spectroscopic Analysis Of Fingernail Clippings Can Help Differentiate Between Postmenopausal Women Who Have And Have Not Suffered A Fracture, James R. Beattie, Niamh M. Cummins, Clare Caraher, Olive M. O'Driscoll, Aruna T. Bansal, Richard Eastell, Stuart H. Ralston, Michael D. Stone, Gill Pearson, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Raman spectroscopy was applied to nail clippings from 633 postmenopausal British and Irish women, from six clinical sites, of whom 42% had experienced a fragility fracture. The objective was to build a prediction algorithm for fracture using data from four sites (known as the calibration set) and test its performance using data from the other two sites (known as the validation set). Results from the validation set showed that a novel algorithm, combining spectroscopy data with clinical data, provided area under the curve (AUC) of 74% compared to an AUC of 60% from a reduced QFracture score (a clinically accepted …

Nano-Photonic Waveguides For Chemical And Biomedical Sensing, Surya Venkatasekhar Cheemalapati

USF Tampa Graduate Theses and Dissertations

In this dissertation, advances in the fields of Photonics, and Plasmonics, and specifically, single cell analysis and waveguide sensing will be addressed. The first part of the dissertation is on Finite Difference Time Domain (FDTD) optimization and experimental demonstration of a nano-scale instrument that allows sensing at the cellular and subcellular levels. A new design of plasmonic coupler into a nanoscale waveguide is proposed and optimized using FDTD simulations. Following this, a subcellular nanoendoscope that can locally excite fluorescence in labelled cell organelles and collect the emitted fluorescent light for detailed spectrum analysis is fabricated and tested. The nanoendoscope has …

Methodological Considerations Of Electron Spin Resonance Spin Trapping Techniques For Measuring Reactive Oxygen Species Generated From Metal Oxide Nanomaterials, Min Sook Jeong, Kyeong-Nam Yu, Hyun Hoon Chung, Soo Jin Park, Ah Young Lee, Mi Ryoung Song, Myung-Haing Cho, Jun Sung Kim

Chemical & Biomedical Engineering Faculty Publications

Qualitative and quantitative analyses of reactive oxygen species (ROS) generated on the surfaces of nanomaterials are important for understanding their toxicity and toxic mechanisms, which are in turn beneficial for manufacturing more biocompatible nanomaterials in many industrial fields. Electron spin resonance (ESR) is a useful tool for detecting ROS formation. However, using this technique without first considering the physicochemical properties of nanomaterials and proper conditions of the spin trapping agent (such as incubation time) may lead to misinterpretation of the resulting data. In this report, we suggest methodological considerations for ESR as pertains to magnetism, sample preparation and proper incubation …

In Silico Driven Metabolic Engineering Towards Enhancing Biofuel And Biochemical Production, Richard Adam Thompson

Doctoral Dissertations

The development of a secure and sustainable energy economy is likely to require the production of fuels and commodity chemicals in a renewable manner. There has been renewed interest in biological commodity chemical production recently, in particular focusing on non-edible feedstocks. The fields of metabolic engineering and synthetic biology have arisen in the past 20 years to address the challenge of chemical production from biological feedstocks. Metabolic modeling is a powerful tool for studying the metabolism of an organism and predicting the effects of metabolic engineering strategies. Various techniques have been developed for modeling cellular metabolism, with the underlying principle …

Development Of An Inflammatory Joint Fluid Corrosion Assessment Method For Metallic Biomaterials, Kathleen Pieri

Honors Capstone Projects - All

There is currently no systematic way to analyze the corrosion response of orthopedic alloys in contact with human joint fluid. The goal of this project was to design and test a small device that can successfully run electrochemical tests on retrieved inflamed joint fluids. Methods of fluid testing analysis were also explored. The a small electrochemical cell was created using polypropylene for the body and an electrode cartridge that could be disposed of after each test. In total the device could hold 4 mL of liquid. Testes were preformed using titanium, stainless steel, and CoCrMo alloys as the working electrodes …

Low Cost, Carbon-Based Micro- And Nano-Structured Electrodes For High Performance Supercapacitors, Kryssia Pamela Díaz Orellana

All Dissertations

Advances in the development of sustainable, low-cost, and reliable energy storage technologies have become a high priority as the demand for high power, and high energy storage devices has risen with emerging technologies in electronics, transportation, and renewable energy systems. Supercapacitors, due to their relatively high energy density and power density, provide an attractive alternative to bridge the gap between conventional batteries and capacitors. Materials ranging from high surface area, inert carbons to Faradaic metal oxides and conducting polymers have been used to achieve a range of performance properties in supercapacitors. However, the development of new technologies faces many challenges, …

Local Delivery Of Ctla-4 Blockade Inhibits Growth Of Pancreatic Tumors, Jack Baltz

Biomedical Engineering Undergraduate Honors Theses

Immune checkpoint blockade has demonstrated great potential in activating antitumor immunity. Ipilimumab is a monoclonal antibody which targets cytotoxic T-lymphocyte antigen-4. CTLA-4 belongs to the CD28 class of receptors and is found on the surface of CD4⁺ and CD8⁺ T cells. CTLA-4 acts to suppress the immune system when bound to CD80 and CD86 receptors on antigen presenting cells. Ipilimumab, or anti-CTLA-4, has shown to be effective in significantly extending the survival of patients with metastatic melanoma. However, systemic delivery of Ipilimumab also induces significant side effects such as: colitis, dermatitis, uveitis, and hypophysitis. In order to minimize …

Micellular Electrokinetic Chromatography For Studying Amyloid Beta Oligomer Membrane Affinity, Andrew Bryson

Biomedical Engineering Undergraduate Honors Theses

Amyloid Beta (Aβ) was the major focus of this study. It is a peptide that is present in the brain with a high tendency to self-aggregate. When this protein aggregates, it forms oligomers and protofibrils which in turn are deposited as senile plaques in the brain. The reason for the concern with these plaques is their association with the neurological disorder Alzheimer’s disease. It has been found that the most dangerous oligomers are formed in a portion of the plasma membrane known as lipid rafts. The purpose of this study was to understand how micelles affect the aggregation properties of …

Mechanical Properties Of Poly (Vinyl Alcohol) Based Blends And Composites, Nazanin Afghan

Electronic Thesis and Dissertation Repository

One of the most important product specifications in design of materials for different applications is to closely match desired mechanical properties of the target. The soft tissue could be very elastic such as blood vessels and skin, whereas others are soft and non-elastic such as fat tissue. Soft human tissue has a diverse structural component that give them the different feel, texture, shape, and mechanical properties.

Poly (vinyl alcohol) (PVA) as hydrophobic polymer has outstanding features such as very good physico-mechanical properties, nontoxicity and biocompatibility, and high swelling properties which makes them favorable for biomaterial and biomedical applications. By physically …

Sustained Cell Differentiation Of 2d H9 Human Embryonic Stem Cells Into Mesenchymal Stem Cells, Hannah M. Christian

UCARE Research Products

This experiment consisted of the controlled differentiation of H9 embryonic stem cells to mesenchymal stem cells. Though this experiment was repeated twice and improvement was seen in these repetitions, the cells were only able to be partially differentiated. However, the morphology of the differentiated cells is similar to those of healthy adult mesenchymal stem cells.

The progression of the differentiation can be seen in the microscope slide photos below. Throughout the differentiation, there occurred a decrease in cell survival and reduction of cell growth, but an increase in mesenchymal stem cell morphology. Throughout the last week of the differentiation, very …

The Role Of Poly(Acrylic Acid) In Conventional Glass Polyalkenoate Cements, Adel M.F. Alhalawani, Declan J. Curran, Daniel Boyd, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements (GPCs) have been used in dentistry for over 40 years. These novel bioactive materials are the result of a reaction between a finely ground glass (base) and a polymer (acid), usually poly (acrylic acid) (PAA), in the presence of water. This article reviews the types of PAA used as reagents (including how they vary by molar mass, molecular weight, concentration, polydispersity and content) and the way that they control the properties of the conventional GPCs (CGPCs) formulated from them. The article also considers the effect of PAA on the clinical performance of CGPCs, including biocompatibility, rheological and …

Brain Tumor In A Dish: Glioma/Astrocyte Co-Cultures As A Model For In Vitro Studies, Erin Eickman, Christina Wilson, Srivatsan Kidambi

UCARE Research Products

This study seeks to engineer an in vitro co-culture model to elucidate the role of glioma-astrocyte interactions on molecular changes in the tumor microenvironment. The use of patterned co-cultures created with polyelectrolyte multilayers and micromolding in capillaries will allow tthe investigation of cell-cell communication. This study will lead to better understanding of the role of healthy cells in cancer progression and potential treatment options.

Characterization Of Silica-Based And Borate-Based, Titanium-Containing Bioactive Glasses For Coating Metallic Implants, Omar Rodriguez, Declan J. Curran, Marcello Papini, Lana M. Placek, Anthony W. Wren, Emil H. Schemitsch, Paul Zalzal, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bioactive glasses have found applications in diverse fields, including orthopedics and dentistry, where they have been utilized for the fixation of bone and teeth and as scaffolds for drug delivery. The present work outlines the characterization of two novel titanium-containing glass series, one silica-based and one borate-based. For the silica-based series, titanium is added at the expense of silicon dioxide whereas for the borate-based series, it is added at the expense of boron oxide as confirmed by Energy Dispersive Spectroscopy. Amorphous structures are obtained for silica-based glass at 15 mol% TiO₂ and for borate-based glasses at 0 mol% and …

Noninvasive Measurement Of Electrical Events Associated With A Single Chlorovirus Infection Of A Microalgal Cell, Seung-Woo Lee, Eun-Hee Lee, Gerhard Thiel, James L. Van Etten, Ravi Saraf

Department of Chemical and Biomolecular Engineering: Faculty Publications

Chlorovirus Paramecium bursaria chlorella virus 1 (PBCV-1) contains a viral-encoded K⁺ channel imbedded in its internal membrane, which triggers host plasma membrane depolarization during virus infection. This early stage of infection was monitored at high resolution by recording the cell membrane depolarization of a single Chlorella cell during infection by a single PBCV-1 particle. The measurement was achieved by depositing the cells onto a network of one-dimensional necklaces of Au nanoparticles, which spanned two electrodes 70 μm apart. The nanoparticle necklace array has been shown to behave as a single-electron device at room temperature. The resulting electrochemical field-effect transistor …

Bioactive Poly(Beta-Amino Ester) Biomaterials For Treatment Of Infection And Oxidative Stress, Andrew L. Lakes

Theses and Dissertations--Chemical and Materials Engineering

Polymers have deep roots as drug delivery tools, and are widely used in clinical to private settings. Currently, however, numerous traditional therapies exist which may be improved through use of polymeric biomaterials. Through our work with infectious and oxidative stress disease prevention and treatment, we aimed to develop application driven, enhanced therapies utilizing new classes of polymers synthesized in-house. Applying biodegradable poly(β-amino ester) (PBAE) polymers, covalent-addition of bioactive substrates to these PBAEs avoided certain pitfalls of free-loaded and non-degradable drug delivery systems. Further, through variation of polymer ingredients and conditions, we were able to tune degradation rates, release profiles, cellular …