Biomedical Engineering and Bioengineering Commons^™

Fabrication And Modification Of Titania Nanotube Arrays For Harvesting Solar Energy And Drug Delivery Applications, Ahmed El Ruby Abdel Rahman Mohamed

Electronic Thesis and Dissertation Repository

The fast diminishing of fossil fuels in the near future, as well as the global warming caused by increasing greenhouse gases have motivated the urgent quest to develop advanced materials as cost-effective photoanodes for solar light harvesting and many other photocatalytic applications. Recently, titania nanotube arrays (TNTAs) fabricated by anodization process has attracted great interest due to their excellent properties such as: high surface area, vertically oriented, highly organized, one-dimensional, nanotubular structure, photoactivity, chemical stability and biocompatibility. This unique combination of excellent properties makes TNTAs an excellent photoanode for solar light harvesting. However, the relatively wide band gap energy of …

Analyses Of Densely Crosslinked Phenolic Systems Using Low Field Nmr, Jigneshkumar Patel

Doctoral Dissertations

A uniform dispersion of reactants is necessary to achieve a complete reaction involving multi-components, especially for the crosslinking of rigid high-performance materials. In these reactions, miscibility is crucial for curing efficiency. This miscibility is typically enhanced by adding a third component, a plasticizer. For the reaction of the highly crystalline crosslinking agent hexamethylenetetramine (HMTA) with a strongly hydrogen-bonded phenol formaldehyde resin, furfural has been traditionally used as the plasticizer. However, the reason for its effectiveness is not clear. In this doctoral thesis work, miscibility and crosslinking efficiency of plasticizers in phenolic curing reactions are studied by thermal analysis and spectroscopic …

Tissue-Guided Engineering Of Polyethylene Glycol Hydrogels, Lauren Jansen

Doctoral Dissertations

Polyethylene glycol (PEG) hydrogels are tunable cell culture platforms that recapitulate tissue geometry, water content, and bulk modulus. Despite these benefits, PEG hydrogels elicit an acute immune response, limiting their use in regenerative medicine, and they critically underrepresent the cell-instructive proteins found in the extracellular matrix (ECM). Here, I developed a new class of tissue-specific PEG-based materials and provided biocompatible strategies to improve the user handling and cell viability post-encapsulation when using these hydrogels. I also demonstrated that decreasing the protein fouling to PEG does not decrease the foreign body response to implanted hydrogels, a common misconception in the field. …

Collapsible Silicone Tubes: An In Vitro Model For Tracheal Traction, Kevin D. Garman

Master's Theses (2009 -)

Obstructive sleep apnea (OSA) is characterized by recurrent episodes of airway collapse and airflow limitation during sleep. Fragmented sleep and reductions in blood oxygen saturation lead to several comorbidities, including hypertension, cardiovascular disease, and cerebrovascular disease. Longitudinal forces (tracheal traction) acting on the soft tissues surrounding the upper airway have been proposed to play a significant role in stabilizing the airway and preventing collapse. However, the relative contribution of longitudinal forces as compared to other factors that affect airway stability (airway geometry, tissue properties, muscle activity) remains unclear. This in-vitro study aimed to investigate to what extent longitudinal forces can …

Identifying And Reducing Variability, Improving Scaffold Morphology, And Investigating Alternative Materials For The Blood Vessel Mimic Lab Electrospinning Process, Evan M. Dowey

Master's Theses

The work of the Cal Poly Tissue Engineering Lab is primarily focused on the fabrication, characterization, and improvement of “Blood Vessel Mimics” (BVMs), tissue engineered constructs used to evaluate cellular response to vascular medical devices. Currently, cells are grown onto fibrous, porous tubes made using an in-house electrospinning process from PLGA, a biocompatible co-polymer. The adhesion and proliferation of cells in a BVM is reliant on the micro-scale structure of the PLGA scaffold, and as such it is of great importance for the electrospinning process to consistently produce scaffolds of similar morphologies. Additionally, it has been shown that cell proliferation …

Rice Hull Bioreactor For Recirculating Aquaculture, Marlon A. Greensword

LSU Doctoral Dissertations

The engineering of floating media biofilters has been optimized over the years. The backwashing process has made them more energy and water efficient. Likewise, moving bed bioreactors (MBBR) are gaining interest and popularity because they are relatively affordable to build. Yet, developing countries’ aquaculture production remains largely excluded from the advances made in recirculating aquaculture systems (RAS). This discrepancy is partially driven by the high costs of media such plastic beads and Kaldnes (KMT) media, commonly used in MBBR.

This dissertation evaluates the usability and profitability of rice hulls (RH), an abundant by-product in many developing nations, as a sinking …

Nanocellulose Fibers As A Potential Material For Orthopedic Implantation Application, David Gregg Holomakoff

Electronic Theses and Dissertations

The field of biomaterials is of immense importance and will continue to grow and develop in the coming years. Novel materials, as well as new approaches for use of existing materials, are sought after now more than ever. Current metal orthopedic implants have an over engineered stiffness and Young’s modulus, causing a phenomenon called stress shielding. Metal implants absorb the majority of force typically exerted on bone and the osteocytes within. When osteocytes fail to sense mechanical forces bones become less dense and weaken, causing possible fracture and other complications. A new orthopedic material is needed matching Young’s modulus of …

Crafting Nanostructured Neural Interfaces With Hydrogel Particles, Emily Ann Morin

Doctoral Dissertations

Central nervous system neural device functionality hinges on effective communication with surrounding neurons. This depends on both the permissiveness of the device material to promote neuron integration and the ability of the device to avoid a chronic inflammatory response. Here, a facile approach has been developed exploring the multiple functionalities of hydrogel particles to provide cues to impart neural integration for such materials. Three distinct, yet interconnected tasks were undertaken: investigating hydrogel particle-modified substrate neuron integration and central nervous system inflammatory response, investigating guided hydrogel particle adsorption, and investigating hydrogel particles as local reservoirs for counteracting adverse effects from oxidative …

Study Of Iron Ion Transit Through Three-Fold Channel Of Ferritin Cage, Shah Alam Limon

MSU Graduate Theses

Ferritin is an iron-storage globular protein with an ability to uptake, mineralize and release iron ions in a controllable manner. The globular hollow shell allows storage of mineralized iron, with several channels responsible for the transit of ions into the shell and out of it. Understanding of the detailed molecular functioning of ferritin is required for rational design of biomimetic conjugate nano-biosystems containing ferritin-like constituents. In this work, ferritin was investigated both numerically by all-atom molecular dynamics (MD) simulations, and experimentally by Raman spectroscopy. Molecular dynamic simulations of a model system comprising iron ions (Fe2+) and a ferritin trimer expressing …

Design And Validation Of Delivery Systems For Galectin-3 For Skin Healing Applications, Karrington A. Mcleod

Electronic Thesis and Dissertation Repository

Chronic wounds present a significant burden to patients, causing pain, impairing limb function, and often resulting in the need for amputation. Treatment of chronic dermal wounds is challenging, with current therapies showing limited efficacy in clinical trials. As galectin-3 has been implicated in several wound healing processes, its efficacy as a therapeutic in skin healing was investigated in this study. An electrospun gelatin scaffold loaded with galectin-3 was developed as a delivery system. The influence of human recombinant galectin-3 in skin healing, when delivered topically and using an electrospun scaffold, was then investigated in wild type and diabetic mice. Electrospun …

Assessment Of The Non-Linear Stress-Strain Characteristics Of Poly (Vinyl Alcohol) Cryogel, Mojdeh Zakeri

Electronic Thesis and Dissertation Repository

Creation of tissue-mimicking constructs is of great importance in the field of biomedical engineering. Poly (vinyl Alcohol) (PVA) is a biomaterial capable of simulating a wide range of geometries and mechanical properties of biological tissues. It is nontoxic, biocompatible, and easy to produce. PVA can be physically crosslinked by repeated cycles of freezing and thawing. The final product of this process is called PVA cryogel (PVA-C). The mechanical properties of PVA-C can be accurately controlled by changing PVA molecular weight, PVA concentration, and number and duration of freeze/thaw cycles (FTC). In this study, the stress-strain behavior of PVA cryogel was …

Investigation Of Chitosan-Based Hydrogels As A Cell Delivery Platform For Adipose-Derived Stem/Stromal Cell Transplantation To Promote Angiogenesis In Ischemic Tissues, Jobanpreet Singh Dhillon

Electronic Thesis and Dissertation Repository

Stem cell transplantation is under investigation to stimulate angiogenesis in patients with peripheral artery disease. To develop a cell-delivery platform that enhances cell retention and function post-transplantation, the response of human adipose-derived stem/stromal cells (ASCs) encapsulated within N-methacrylate glycol chitosan (MGC) hydrogels with or without integrin-binding RGD or IKVAV motifs was explored. ASC viability was enhanced in the MGC and MGC-RGD hydrogels relative to the MGC-IKVAV group under hypoxic (2% O­₂) culture conditions, with cell spreading and higher metabolic activity noted in MGC-RGD at 14 days. Analysis of angiogenic gene expression revealed similar patterns between all hydrogel …

Effect Of L-Ascorbic Acid And All-Trans Retinoic Acid On Smooth Muscle Cells Cultured On Pcl Scaffolds, Brandon Chaffay

Electronic Thesis and Dissertation Repository

The aim of vascular tissue engineering (VTE) is to fabricate tissues that are both mechanically and biologically competent similar to the native vessel they are intended to replace. To this end, the incorporation of sufficient extracellular matrix elastin and collagen is important. The objective of this thesis work was to evaluate the effect of two biochemical factors, l-ascorbic acid (AA) and all-trans retinoic acid (atRA), on elastin synthesis when coronary artery smooth muscle cells were cultured on 3D polycaprolactone (PCL) scaffolds. First, porous PCL scaffolds were fabricated using a solvent casting and particulate leaching approach. The effect of different …

Synthesis And Characterization Of Poly(Simvastatin) - Incorporated Copolymers And Blends For Bone Regeneration, Theodora Asafo-Adjei

Theses and Dissertations--Biomedical Engineering

Common biodegradable polyesters such as poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(ε-caprolactone) (PCL) are used as drug delivery vehicles for tissue regenerative applications. However, they are typically bioinert, with drug loading limitations. Polymerizing the active agent or precursor into its respective biodegradable polymer would control drug loading via molar ratios of drug to initiator used for synthesis. Simvastatin was chosen due to its favorable anti-inflammatory, angiogenic, and osteogenic properties. In addition, its lactone ring lends itself to ring-opening polymerization and, consequently, the synthesis of poly(simvastatin) with controlled simvastatin release.

Simvastatin was first polymerized with a 5kDa methyl-terminated poly(ethylene glycol) …

Modulating The Innate Immune Response To Electrospun Scaffolds And Polymer Degradative Byproducts, Daniel Abebayehu

Theses and Dissertations

Implanted biomaterials often induce inflammation that frequently leads to the foreign body response, fibrosis, and the failure of the implant. Thus, it is important to evaluate how cells interact with materials to promote a more regenerative response. It is critical to determine how to modulate the response of tissue resident innate immune cells, as they are among the first cells to interact with implanted materials. Among tissue resident innate immune cells are mast cells, which are inflammatory sentinels that degranulate and orchestrate the fate of other cell populations, such as monocytes/macrophages and lymphocytes. Mast cells have also been reported to …

Investigation Of Polymeric Composites For Controlled Drug Release, Hsi-Wei Yeh

Theses and Dissertations

The Electrospray (ES) technique is a promising particle generation method for drug delivery due to its capabilities of producing monodisperse PLGA composite particles with unique configurations and high drug encapsulation efficiency. In the dissertation work, the coaxial dual capillary ES was used to generate drug-loaded core-shell PLGA particles to study the effects of particle filling materials, drug loading locations and particle shell thicknesses on the resultant in vitro release behaviors of the hydrophilic and/ or hydrophobic model drugs. Through release profile characterization of drug-loaded PLGA particles (particle size: 400 nm and 1 μm), it was confirmed that the co-encapsulation of …

Formulation And Testing Of Biodegradable Polymeric Coating On Zinc Wires In Cardiovascular Stent Application, Avishan Arab Shomali

Dissertations, Master's Theses and Master's Reports

Biodegradable and biocompatible poly (L-lactic-acid) (PLLA) coating was applied on a modified zinc (Zn) substrate by dip coating, with the intent to delay the bio-corrosion and slow the degradation rate of zinc substrate. 3-(Trimethoxysilyl) propyl methacrylate (MPS) was used for modification of the zinc substrate for promoting the adhesion between the metallic substrate and the polymer coating. It is hypothesized that the delay in Zn biodegradation could be useful in the first several weeks to prevent the early loss of mechanical integrity of the endovascular stent and to improve the healing process of the diseased vascular site. The PLLA coating …

Structural Characteristics And Corrosion Behavior Of Bio-Degradable Zn-Li Alloys In Stent Application, Shan Zhao

Dissertations, Master's Theses and Master's Reports

Zinc has begun to be studied as a bio-degradable material in recent years due to its excellent corrosion rate and optimal biocompatibility. Unfortunately, pure Zn’s intrinsic ultimate tensile strength (UTS; below 120 MPa) is lower than the benchmark (about 300 MPa) for cardiovascular stent materials, raising concerns about sufficient strength to support the blood vessel. Thus, modifying pure Zn to improve its mechanical properties is an important research topic.

In this dissertation project, a new Zn-Li alloy has been developed to retain the outstanding corrosion behavior from Zn while improving the mechanical characteristics and uniform biodegradation once it is implanted …

Fabrication Of Flexible, Biofunctional Architectures From Silk Proteins, Ramendra K. Pal

Theses and Dissertations

Advances in the biomedical field require functional materials and processes that can lead to devices that are biocompatible, and biodegradable while maintaining high performance and mechanical conformability. In this context, a current shift in focus is towards natural polymers as not only the structural but also functional components of such devices. This poses material-specific functionalization and fabrication related questions in the design and fabrication of such systems. Silk protein biopolymers from the silkworm show tremendous promise in this regard due to intrinsic properties: mechanical performance, optical transparency, biocompatibility, biodegradability, processability, and the ability to entrap and stabilize biomolecules. The unique …

Nanomedicine Drug Delivery Across Mucous Membranes, Michael G. Lancina Iii

Theses and Dissertations

NANOMEDECINE DRUG DELIVERY ACROSS MUCOUS MEMBRANES

By Michael G. Lancina III

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Virginia Commonwealth Univeristy, 2017.

Major Director: Dr. Hu Yang, Associate Professor, Chemical and Life Science Engineering

Control over the distribution of therapeutic compounds is a complex and somewhat overlooked field of pharmaceutical research. When swallowing a pill or receiving an injection, it is commonly assumed that drug will spread throughout the body in a more or less uniform concentration and find its way to wherever it is needed. In …

Electrospraying Extracellular Matrix To Form Nanoparticles, Patrick Link

Theses and Dissertations

Chronic Obstructive Pulmonary Disease (COPD) is a leading cause of death worldwide. Alveolar wall destruction is a significant contributor to COPD. Inflammatory macrophages are a major source of the Extracellular Matrix (ECM) proteolysis. ECM breakdown causes air to get trapped in the alveoli, obstructing airflow. One step in curing COPD may be to convert inflammatory to pro-regenerative macrophages. Recently, decellularized ECM scaffolds have shown the ability to induce a pro-regenerative phenotype.

Yet these scaffolds are incapable for reaching the alveolar region of the lungs. To reach the alveolar region particles need a diameter of 1-5 μm or smaller than 300 …

Shape Memory Behavior Of Dense And Porous Niti Alloys Fabricated By Selective Laser Melting, Soheil Saedi

Theses and Dissertations--Mechanical Engineering

Selective Laser Melting (SLM) of Additive Manufacturing is an attractive fabrication method that employs CAD data to selectively melt the metal powder layer by layer via a laser beam and produce a 3D part. This method not only opens a new window in overcoming traditional NiTi fabrication problems but also for producing porous or complex shaped structures. The combination of SLM fabrication advantages with the unique properties of NiTi alloys, such as shape memory effect, superelasticity, high ductility, work output, corrosion, biocompatibility, etc. makes SLM NiTi alloys extremely promising for numerous applications.

The SLM process parameters such as laser power, …

Pore-Confined Carriers And Biomolecules In Mesoporous Silica For Biomimetic Separation And Targeting, Shanshan Zhou

Theses and Dissertations--Chemical and Materials Engineering

Selectively permeable biological membranes composed of lipophilic barriers inspire the design of biomimetic carrier-mediated membranes for aqueous solute separation. This work imparts selective permeability to lipid-filled pores of silica thin film composite membranes using carrier molecules that reside in the lipophilic self-assemblies. The lipids confined inside the pores of silica are proven to be a more effective barrier than bilayers formed on the porous surface through vesicle fusion, which is critical for quantifying the function of an immobilized carrier. The ability of a lipophilic carrier embedded in the lipid bilayer to reversibly bind the target solute and transport it through …

A 3d Biomimetic Scaffold Using Electrospinning For Tissue Engineering Applications, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

Electrospinning holds great promise for designing functional 3D biomimetic scaffolds for tissue engineering applications. The technique allows for the reproducible fabrication of 3D scaffolds with control over the porosity and thickness. In this work, a novel method for the synthesis of a 3D electroactive scaffold using electrospinning from polycaprolactone (PCL), Polyvinylidene Fluoride (PVDF) and Polyaniline (PANI) is reported. Additional scaffolds involving different morphologies of PCL, PCL-PVDF and PCL-PANI-PVDF were also fabricated and evaluated. The scaffolds were characterized using electron microscopy to visualize the morphologies. Infrared spectroscopy was used to confirm the presence of polymers and their respective phases in the …

Developing Afm Techniques For Testing Peg Hydrogels, Hannah L. Cebull, Jessica Stukel, Rebecca Willits

Williams Honors College, Honors Research Projects

Many instruments are used to find elastic properties of biological samples using methods such as tensile and bending tests, but using the atomic force microscope (AFM) is considered a non-destructive method because it can provide repeated local stiffness information without damaging the sample. It additionally allows the sample to be tested in an aqueous environment, which is optimal for soft materials such as hydrogels. The nanoindentation is performed via cantilever, measuring the deflection of the cantilever during the contact of the sample using a laser. Compared to hard samples, testing soft materials can present more challenges when working with the …

Development Of An Electrospun And 3d Printed Cellular Delivery Device For Dermal Wound Healing, Ryan M. Clohessy

Theses and Dissertations

The goal of this research was to develop a system of individualized medicine that could be applied to dermal wounds serving as a wound dressing and synthetic extracellular matrix while delivering stem cells to the wound bed. First, fabrication parameters for electrospinning polymer fibers were determined. This involved evaluating fiber morphology with respect to polymer selection and solution concentration. Next, construct fabrication was examined to produce an integrated void space, or cargo area, suitable to maintain stem cells. In vitro studies to ensure stem cell viability and phenotype were conducted, and results supported the notion that cells could be administered …