Biomedical Engineering and Bioengineering Commons^™

Unlocking The Secrets Of Multi-Flagellated Propulsion, Stefan Oma Nwandu-Vincent

Doctoral Dissertations

In this work, unique high-speed imaging platforms and an array of theoretical analysis methods are used to thoroughly investigate eukaryotic multi-flagellated propulsion using Tritrichomonas foetus as a test case. Through experimental observations through our imaging system with superior resolution and capture rate exceeding that of previous studies, it was discovered for the first time that the T. foetus employs a strategy similar to that of the “run and tumble” strategies found in bacteria and Chlamydomonas; it has two distinct flagellar beating patterns that result in two different body swimming motions, linear and turning swimming.

These two flagella patterns were …

Smooth Muscle Cell Organization In The Stem Region Of The Gracilis Collateral Circulation In Balb/C Mice, Laura Lenae Burckhardt

Biomedical Engineering

Of the approximately 8 million Americans who suffer from ischemic peripheral arterial occlusive disease (PAOD), many present with intermittent claudication, or pain associated with exercise. Impaired vasodilation of resistance vessels is a potential explanation for this symptom. Occluded arteries can lead to increased flow through collateral vessels, which function as natural bypasses around the obstruction. This increase in blood flow and resulting shear stress can cause outward remodeling, or arteriogenesis, which improves the efficacy of collaterals. However, following femoral artery ligation in a mouse model of chronic ischemia, vasodilation in the stem region of collateral vessels is impaired at day …

The Effect Of Artery Bifurcation Angles On Fluid Flow And Wall Shear Stress In The Middle Cerebral Artery, Zachary Ramey Jones

Master's Theses

Saccular aneurysms are the abnormal plastic deformation of veins and arteries that can lead to lethal thrombus genesis or internal hemorrhaging. Medication and surgery greatly reduce the mortality rates, but treatment is limited by predicting who will develop aneurysms. A common location for saccular aneurysm genesis is at the main middle cerebral artery (MCA) bifurcation. The main MCA bifurcation is comprised of the M1 MCA segment, parent artery, and two M2 segments, daughter arteries. Studies have found that the lateral angle (LA) ratio of the MCA bifurcation is correlated with aneurysm formation. The LA ratio is defined as the angle …

A Highly Adaptive And Cost Effective Second Generation Incubator (Sgi) Towards Educational, Research And Clinical Processes, Yassir H. Al-Sayagh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Today´s rising demand for more reliable and affordable alternatives to organ transplant has led to a growing market for in vitro tissue culture systems. The main objective of tissue engineering as a whole is to employ human tissue equivalents for commercial use. The state-of-the-art processes for producing these so called tissue models are still very expensive, difficult to produce and time-consuming.

To engineer tissues, in vitro, a three-dimensional support structure commonly termed scaffold is needed. Stem cells are then added to the scaffold. In order for tissue to materialize, the scaffold and the cells must be incubated (cultured) at a …

Movement Effects On The Flow Physics And Nutrient Delivery In Engineered Valvular Tissues, Manuel Salinas

FIU Electronic Theses and Dissertations

Mechanical conditioning has been shown to promote tissue formation in a wide variety of tissue engineering efforts. However the underlying mechanisms by which external mechanical stimuli regulate cells and tissues are not known. This is particularly relevant in the area of heart valve tissue engineering (HVTE) owing to the intense hemodynamic environments that surround native valves. Some studies suggest that oscillatory shear stress (OSS) caused by steady flow and scaffold flexure play a critical role in engineered tissue formation derived from bone marrow derived stem cells (BMSCs). In addition, scaffold flexure may enhance nutrient (e.g. oxygen, glucose) transport. In this …

Neuromuscular Changes In Older Adults During The Lateral Step Task, Tatiana Bejarano

FIU Electronic Theses and Dissertations

Older adults may have trouble when performing activities of daily living due to decrease in physical strength and degradation of neuromotor and musculoskeletal function. Motor activation patterns during Lateral Step Down and Step Up from 4-inch and 8-inch step heights was assessed in younger (n=8, 24.4 years) and older adults (n=8, 58.9 years) using joint angle kinematics and electromyography of lower extremity muscles. Ground reaction forces were used to ascertain the loading, stabilization and unloading phases of the tasks. Older adults had an altered muscle activation sequence and significantly longer muscle bursts during loading for the tibialis anterior, gastrocnemius, vastus …

Characterization Of A Contact-Stylus Surface Digitization Method Using Collaborative Robots: Accuracy Evaluation In The Context Of Shoulder Replacement Or Resurfacing, Sara Saud Zimmo

Electronic Thesis and Dissertation Repository

Total shoulder arthroplasty (TSA) is the third most common joint replacement. While robot-assisted hip and knee replacement technologies have enjoyed extensive development, this has been limited in the upper limb. This work focused on quantifying the localization accuracy of a robotic system, and evaluating its efficacy in the context of TSA.

A collaborative robot was fitted with a stylus tip to perform manual surface digitizations using the robot’s encoder output. In the first experiment, two precision-machined master cubes, representing the working volume around a glenoid structure, were used for system validation. Next, cadaveric glenoids were digitized and compared to a …

Finite Element Modeling Of The Proximal Humerus To Compare Stemless, Short And Standard Stem Humeral Components Of Varying Material Stiffness For Shoulder Arthroplasty, Najmeh Razfar

Electronic Thesis and Dissertation Repository

In patients with debilitating pain due to osteoarthritis, total shoulder arthroplasty can restore function and provide effective pain relief. Newer implant designs vary in length and material stiffness. Unfortunately, literature on these newer implants is limited. This thesis investigates the effect of stem length and implant material stiffness on proximal humeral bone stresses. 3D bone models with implants of various stem lengths (stemless, short, and standard) and different material stiffness’s (CoCr, Ti and PEEK) were generated using MIMICS, Solidworks and ABAQUS for varying abduction angles (15°, 45° and 75°). Cortical and trabecular stresses were contrasted with the intact bone state. …

Visual Perception And Cognition In Image-Guided Intervention, Kamyar Abhari

Electronic Thesis and Dissertation Repository

Surgical image visualization and interaction systems can dramatically affect the efficacy and efficiency of surgical training, planning, and interventions. This is even more profound in the case of minimally-invasive surgery where restricted access to the operative field in conjunction with limited field of view necessitate a visualization medium to provide patient-specific information at any given moment. Unfortunately, little research has been devoted to studying human factors associated with medical image displays and the need for a robust, intuitive visualization and interaction interfaces has remained largely unfulfilled to this day. Failure to engineer efficient medical solutions and design intuitive visualization interfaces …

Nerve Fiber Diameter Measurements Using Hematoxylin And Eosin Staining And Brightfield Microscopy To Assess The Novel Method Of Characterizing Peripheral Nerve Fiber Distributions By Group Delay, Jorge Arturo Vazquez

Master's Theses

Peripheral neuropathies are a set of common diseases that affect the peripheral nervous system, causing damage to vital connections between various parts of the body and the brain and spinal cord. Different clinical conditions are known to selectively impact various size nerve fibers, which often makes it difficult to diagnose which peripheral neuropathy a patient might have. The nerve conduction velocity diagnostic test provides clinically useful information in the diagnosis of some peripheral neuropathies. This method is advantageous because it tends to be minimally invasive yet it provides valuable diagnostic information. However, this test does not determine characteristics of peripheral …

Design, Characterization And Application Of A Multiple Input Stethoscope Apparatus, Spencer Geng Wong

Master's Theses

For this project, the design, implementation, characterization, calibration and possible applications of a multiple transducer stethoscope apparatus were investigated. The multi-transducer sensor array design consists of five standard stethoscope diaphragms mounted to a rigid frame for a-priori knowledge of their relative spatial locations in the x-y plane, with compliant z-direction positioning to ensure good contact and pressure against the subject’s skin for reliable acoustic coupling. When this apparatus is properly placed on the body, it can digitally capture the same important body sounds investigated with standard acoustic stethoscopes; especially heart sounds. Acoustic signal inputs from each diaphragm are converted to …

Joint Reaction Force And Contributions Of Surrounding Muscles To Knee Joint Load During Stair Ascent In Total Knee Replacement Patients And Healthy Individuals, Robert Jacob Rasnick

Masters Theses

Total knee replacement (TKR) is commonly used to correct end stage knee osteoarthritis (OA) of the knee joint. Unfortunately, difficulty with stair climbing has been seen to exist, prolonging the challenges of TKR patents. Complete understanding of loading at the knee is of great interest in order to aid patient populations, implant manufacturers, rehabilitation, and future research. The outcome of a TKR is intended to reestablish normal motion and loading of the knee. Musculoskeletal modeling provides a means to accurately approximate joint loading and the corresponding muscle contributions during a movement.

The purpose of the present study was to examine …

Human Metaphase Chromosome Analysis Using Image Processing, Akila M.S Subasinghe Arachchige

Electronic Thesis and Dissertation Repository

Development of an effective human metaphase chromosome analysis algorithm can optimize expert time usage by increasing the efficiency of many clinical diagnosis processes. Although many methods exist in the literature, they are only applicable for limited morphological variations and are specific to the staining method used during cell preparation. They are also highly influenced by irregular chromosome boundaries as well as the presence of artifacts such as premature sister chromatid separation.

Therefore an algorithm is proposed in this research which can operate with any morphological variation of the chromosome across images from multiple staining methods. The proposed algorithm is capable …

Application Of Limited Mixing In The Hele-Shaw Geometry In Fabrication Of Janus Hydrogels, Md Mahmudur Rahman

Md Mahmudur Rahman

It is widely accepted that cells behave differently responding to the stiffness of their extracellular matrix (ECM). Such observations were made by culturing cells on hydrogel substrates of tunable stiffness. However, it was recently proposed that cells may sense how strongly they are tethered to ECM, not the local stiffness of ECM. To investigate both hypotheses, we developed a method to fabricate Janus polyacrylamide (PAAM) gels. We squeeze two drops of different concentrations in the Hele-Shaw geometry to generate radial Stokes flow. When the drops coalesce, limited mixing occurs at the interface due to the narrow confinement, and diffusion normal …

Experimental And Numerical Investigation Of The Mechanism Of Blast Wave Transmission Through A Surrogate Head, Yi Hua, Praveen Akula, Linxia Gu, Jeff Berg, Carl A. Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

This work is to develop an experiment-validated numerical model to elucidate the wave transmission mechanisms through a surrogate head under blast loading. Repeated shock tube tests were conducted on a surrogate head, i.e., water-filled polycarbonate shell. Surface strain on the skull simulant and pressure inside the brain simulant were recorded at multiple locations. A numerical model was developed to capture the shock wave propagation within the shock tube and the fluid-structure interaction between the shock wave and the surrogate head. The obtained numerical results were compared with the experimental measurements. The experiment-validated numerical model was then used to further understand …

Mathematically Modeling Fetal Electrocardiograms, Samuel Estes, Kiersten Utsey, Erick Kalobwe

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

Abstract

Some of the most common and fatal birth defects are those related to the heart. In adults, possible heart conditions are often identified through the use of an electrocardiogram (ECG). However, due to the presence of other signals and noise in the recording, fetal eletrocardiography has not yet proven effective in diagnosing these defects. This paper develops a mathematical model of three-dimensional heart vector trajectories, which was used to generate synthetic maternal and fetal ECG signals. The dipole model is a useful simplification in which the electrical activity of the heart is viewed as a single time-varying vector originating …

Team Omnimouse, Derek J. Halman, Josh B. Porter, Steven A. Silver, Ian S. Stemper

Computer Engineering

INFORMATION, DATA, FIGURES AND DRAWINGS EMBODIED IN THIS DOCUMENT ARE STRICTLY CONFIDENTIAL AND ARE SUPPLIED ON THE UNDERSTANDING THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF QUALITY OF LIFE PLUS.

Developent Of A Phospholipid Encapsulation Process For Quantum Dots To Be Used In Biologic Applications, Logan Grimes

Master's Theses

The American Cancer Society predicts that 1,665,540 people will be diagnosed with cancer, and 585,720 people will die from cancer in 2014. One of the most common types of cancer in the United States is skin cancer. Melanoma alone is predicted to account for 10,000 of the cancer related deaths in 2014. As a highly mobile and aggressive form of cancer, melanoma is difficult to fight once it has metastasized through the body. Early detection in such varieties of cancer is critical in improving survival rates in afflicted patients. Present methods of detection rely on visual examination of suspicious regions …

Developing Defined And Scalable 3d Culture Systems For Culturing Human Pluripotent Stem Cells At High Densities, Yuguo Lei, Daeun Jeong, Jifang Xiao, David V. Schaffer

Department of Chemical and Biomolecular Engineering: Faculty Publications

Human pluripotent stem cells (hPSCs)—including embryonic stem cells (hESCs) and induced pluripotent stem cells (hiPSCs)—are very promising candidates for cell therapies, tissue engineering, high throughput pharmacology screens, and toxicity testing. These applications require large numbers of high quality cells; however, scalable production of human pluripotent stem cells and their derivatives at a high density and under well-defined conditions has been a challenge. We recently reported a simple, efficient, fully defined, scalable, and good manufacturing practice (GMP) compatible 3D culture system based on a thermoreversible hydrogel for hPSC expansion and differentiation. Here, we describe additional design rationale and characterization of this …

Mr To Ultrasound Registration For Image-Guided Prostate Biopsy, Yue Sun

Electronic Thesis and Dissertation Repository

Transrectal ultrasound (TRUS) guided prostate biopsy is the standard approach for diagnosis of prostate cancer (PCa). However, due to the lack of image contrast of prostate tumors, it often results in false negatives. Magnetic Resonance Imaging (MRI) has been considered to be a promising imaging modality for noninvasive identification of PCa, since it can provide a high sensitivity and specificity for the detection of early stage PCa. Our main objective is to develop a registration method of 3D MR-TRUS images, allowing generation of volumetric 3D maps of targets identified in 3D MR images to be biopsied using 3D TRUS images. …

Investigating The Shelf Life Of Benzoyl Peroxide Coated Nozzles For Bone Cement Application, Alysen Leigh Demzik

Honors Capstone Projects - All

Two-solution bone cements (TSBC) were developed to address the limitations of current powder-liquid bone cements, however are characterized by a limited shelf life due to spontaneous free radical polymerization. As a solution to pre-polymerization concerns, the initiator benzoyl peroxide (BPO) was removed from the cement solution and incorporated into a thin film coating within the static mixing nozzle, allowing the BPO to integrate with the TSBC as it is mixed for use. Only short-term storage of BPO-coated nozzles and the subsequent effects on bone cement properties is known. The goal of this study was to investigate the effects of time, …

A Study Of Ciliary Beating In Chlamydomonas, Xin Li

Honors Capstone Projects - All

The goal of this research is to understand how a unicellular green alga, Chlamydomonas-reinhardtii, responds to red light (670nm) and sound waves, by monitoring the beating frequency of its two cilia, which control cell motility. Ciliary beating frequency (BF) is proportional to the production of ATP, mainly generated by photosynthesis. A photosynthesis inhibitor, 3-(3-, 4-dichlorophenyl)-1, 1-dimethylurea (DCMU) decreases ATP production by photosynthesis. I used DCMU as a tool to analyze the red light effect on BF.

In the process of studying the effect of red light, I unexpectedly discovered experimental conditions for unstable ciliary beating (as shown in the video). …

Application Of Limited Mixing In The Hele-Shaw Geometry In Fabrication Of Janus Hydrogels, Md Mahmudur Rahman

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

It is widely accepted that cells behave differently responding to the stiffness of their extracellular matrix (ECM). Such observations were made by culturing cells on hydrogel substrates of tunable stiffness. However, it was recently proposed that cells may sense how strongly they are tethered to ECM, not the local stiffness of ECM. To investigate both hypotheses, we developed a method to fabricate Janus polyacrylamide (PAAM) gels. We squeeze two drops of different concentrations in the Hele-Shaw geometry to generate radial Stokes flow. When the drops coalesce, limited mixing occurs at the interface due to the narrow confinement, and diffusion normal …

Material Differences In Equine Cortical And Trabecular Bone, Ryan B. Allen

Master's Theses

A greater understanding of bone materials would be beneficial in creating more accurate computer models and in the making of biomedical products involving bone. This study set out to determine whether cortical and trabecular bone are two separate materials, or whether they are the same material with a variance in porosity. To answer this question, samples were taken from different sections of the equine metacarpus, underwent densitometry analysis and were statistically analyzed. The majority of results suggest that the material is the same between varying densities of bone and thus the same between cortical and trabecular bone. These particular results …

Investigating The Role Of A Less Uranium Tolerant Strain, Isolated From The Hanford Site Soil, On Uranium Interaction In Polyphosphate Remediation Technology, Paola Sepulveda Medina

FIU Electronic Theses and Dissertations

Bacteria are key players in the processes that govern fate and transport of contaminants. Previous assessment showed that the Arthrobacter oxydans (A.oxydans) G968 strain has a lower ability to tolerate U(VI) toxicity in bicarbonate-free media compared to other isolate A.oxydans G975. The study experimentally investigated several parameters such as the potential of bicarbonate to accelerate U(VI) release from autunite mineral in the presence of a less U(VI) tolerant bacterial strain, in the conditions mimicking Hanford Site subsurface environments. Results showed that despite morphological differences between the two bacterial strains, A.oxydans G968 and G975, they are able to dissolute uranium at …

From Cardiac Optical Imaging Data To Body Surface Ecg: A Three Dimensional Ventricle Model, Yihua Zhao

Theses and Dissertations--Biomedical Engineering

Understanding the mechanisms behind unexplained abnormal heart rhythms is important for diagnosis and prevention of arrhythmias. Many studies have investigated the mechanisms at organ, tissue, cellular and molecular levels. There is considerable information available from tissue level experiments that investigate local action potential properties and from optical imaging to observe activity propagation properties at an organ level. By combining those electrophysiological properties together, in the present study we developed a simulation model that can help in estimation of the resulting body surface potentials from a specific electrical activity pattern within the myocardium. Some of the potential uses of our model …

The Effect Of Various Pathologies On Bone Quality, Daniel S. Porter

Theses and Dissertations--Biomedical Engineering

Bone’s ability to resist fracture is often ignored until a low-energy fracture occurs. Patients with Chronic Kidney Disease (CKD) or osteoporosis are at an increased risk of low-energy fracture. Generally, fracture risk is evaluated by using a bone mineral density (BMD) test. BMD values; however, do not fully predict bone’s ability to resist fracture. This suggests that other parameters may be involved. Bone quality is the term used to describe these parameters, which are categorized into three groups: structural, material, and microdamage. The aim of this dissertation research was to examine whether bone quality was altered in patients who: 1) …

Human Cardiovascular Responses To Artificial Gravity Variables: Ground-Based Experimentation For Spaceflight Implementation, Mark Howarth

Theses and Dissertations--Biomedical Engineering

One countermeasure to cardiovascular spaceflight deconditioning being tested is the application of intermittent artificial gravity provided by centripetal acceleration of a human via centrifuge. However, artificial gravity protocols have not been optimized for the cardiovascular system, or any other physiological system for that matter. Before artificial gravity protocols can be optimized for the cardiovascular system, cardiovascular responses to the variables of artificial gravity need to be quantified.

The research presented in this document is intended to determine how the artificial gravity variables, radius (gravity gradient) and lower limb exercise, affect cardiovascular responses during centrifugation. Net fluid (blood) shifts between body …

Analysis And Modeling Of The Roles Of Actin-Myosin Interactions In Bladder Smooth Muscle Biomechanics, Seyed Omid Komariza

Theses and Dissertations

Muscle mechanical behavior potentially plays an important role in some of the most common bladder disorders. These include overactive bladder, which can involve involuntary contractions during bladder filling, and impaired contractility or underactive bladder, which may involve weak or incomplete contractions during voiding. Actin-myosin cross-bridges in detrusor smooth muscle (DSM) are responsible for contracting and emptying the bladder. The total tension produced by muscle is the sum of its preload and active tensions. Studies suggest that actin-myosin cross-links are involved in adjustable preload stiffness (APS), which is characterized by a preload tension curve that can be shifted along the length …

Novel Technologies For The Detection And Mitigation Of Drowsy Driving, Samuel Lawoyin

Theses and Dissertations

In the human control of motor vehicles, there are situations regularly encountered wherein the vehicle operator becomes drowsy and fatigued due to the influence of long work days, long driving hours, or low amounts of sleep. Although various methods are currently proposed to detect drowsiness in the operator, they are either obtrusive, expensive, or otherwise impractical. The method of drowsy driving detection through the collection of Steering Wheel Movement (SWM) signals has become an important measure as it lends itself to accurate, effective, and cost-effective drowsiness detection. In this dissertation, novel technologies for drowsiness detection using Inertial Measurement Units (IMUs) …