Biomedical Engineering and Bioengineering Commons^™

Synthesis Of Alginate/Hydroxyapatite Beads For Acetaminophen Delivery, Anesylvia Angan, Nonni Soraya Sambudi

Makara Journal of Science

Conventional drug delivery systems usually involve the intake of multiple drugs, which could amplify the risk of overdosing. Acetaminophen is a widely used pain relief substance that is prone to accidental overdosing. Hence, a controlled drug delivery system is needed to ensure its efficacy. A nanocomposite hydroxyapatite/alginate system that was used as a drug carrier for acetaminophen was synthesized through the sol-gel method, and the mechanism underlying its controlled drug delivery was investigated. Spherical nanocomposite bead samples were synthesized by incorporating 5 wt%, 10 wt%, and 15 wt% hydroxyapatite into mixtures containing alginate. The mixtures were then dropped into calcium …

Characterization Of Application-Driven Sol-Gel Coated Meshes And Composites, Armaghan Naderi

LSU Doctoral Dissertations

Surface engineering is a multi-disciplinary research area that encompasses disciplines such as materials science, chemistry, mechanical engineering, and electrical engineering. Coating is a surface modification technique in surface engineering, applied on the surface of a substrate (i.e., bulk material), to cover/protect it from environmental degradation or to modify/improve surface properties for specific applications. This PhD research presents an in-depth investigation of sol-gel ceramic coatings to modify surface characteristics of bulk materials for two specific applications: 1) antistatic/antidust applications, and 2) biomaterial implant applications.

First, zirconia antistatic thin films on glass substrates, and their application to polymer-based composites, was studied. Zirconia …

Characterization Of Nano-Cellulose Based Composites For Biomedical Applications, Mitchell P. Chesley

Electronic Theses and Dissertations

The number of orthopedic surgeries performed globally has steadily increased over the past decade due to the standardization of procedures as well as technological advancements. During this time orthopedic devices have been composed predominantly of metals, such as Titanium, Vanadium, Molybdenum, and Stainless steel, as well as their alloys, due to the high strength and durability of these materials. However, metals may, in fact, be suboptimal for orthopedic devices. For example, metals exhibit Young’s modulus much greater than the surrounding bone, inducing localized stress-shielding promoting cortical atrophy, which can lead to osteoporosis. In recent years polymers have been successfully explored …

Osteon Mimetic Scaffolding, Janay Clytus

Senior Theses

The purpose of this research is to provide an alternative to naturally derived bone grafts. There is a gap in the supply of donors and the demand of bone tissue. Artificial scaffold creation can work as an implant and decrease the shortage of bone grafts and increase the range of injuries that can be repaired. Current research focuses on optimizing mechanical properties such as porosity, improving vascularization using cells, and generating osteoconductivity. For osteodifferentiation, mesenchymal stem cells (MSCs) can differentiate into mesodermal lineages such as chondrocytes, osteoblasts, adipocytes, and tenocytes by supplementing cultures with lineage-specific soluble factors (Marchetti). Co-culturing ECFCs …

The Role Of Bone Sialoprotein In Periodontal Tissue Development And Bone Repair, Yohannes Soenjaya

Electronic Thesis and Dissertation Repository

Bone development and repair involve complex processes that include interaction between cells and their surrounding matrix. In the body, bone sialoprotein (BSP) expression is up-regulated at the onset of mineralization. BSP is a multifunctional acidic phosphoprotein with collagen-binding, hydroxyapatite nucleating, and integrin recognition (RGD sequence, which is important for cell-attachment and signaling) regions. Mice lacking BSP expression (Bsp^-/-), exhibit a bone phenotype with reductions in bone mineral density, bone length, osteoclast activation, and impaired bone healing. This thesis examined the role of BSP in tooth development and also its potential use as a therapeutic reagent for bone …

The Advancement Of Bacterial Cellulose As A Bone And Vascular Scaffolds, Ryan Lee Hammonds

Doctoral Dissertations

Bacterial cellulose (BC) is a natural hydrogel made of nanofibers. This material has been used in commercial products, including wound dressings. BC can be modified and optimized for improved performance in multiple applications. This work will focus on producing and characterizing resorbable cellulose, a composite for bone applications, and a composite for a synthetic venous valve leaflet.

BC can be produced and modified to perform as a degradable tissue scaffold. This is achieved by an oxidation procedure after the initial production and purification of native BC. A material characterization of oxidized BC was performed to identify the changes in properties …

Calcium Phosphate-Based Resorbable Biomaterials For Bone Regeneration, Daniel O. Costa

Electronic Thesis and Dissertation Repository

Bone defects are a prevalent problem in orthopedics and dentistry. Calcium phosphate-based coatings and nanocomposites offer unique solutions towards producing scaffolds with suitable physical, mechanical and biological properties for bone regeneration.

We developed a novel method to synthesize hydroxyapatite (HA) particles with high aspect ratio using sol-gel chemistry and hydrothermal treatment. We obtained tunable pure-phase carbonated-HA in the form of micro/nanorods and nanowires (diameters 25-800 nm). To mimic the structure of bone, HA nanowires were homogenously mixed within poly(ε-caprolactone) (PCL) to produce nanocomposites with improved mechanical properties as determined by uniaxial tensile testing.

Surface chemistry and topography of biomaterials play …

Bacterial Cellulose Templates For Nano-Hydroxyapatite Fibre Synthesis, Jordan A. Demello

Electronic Thesis and Dissertation Repository

Guided bone regeneration is a medical procedure which induces in vivo re-growth of bone using membranes and osteopromoting fillers. In this work, bacterial cellulose fibers were isolated and used as a basis for biomimetic hydroxyapatite growth, with the ultimate goal of producing GBR filler materials. Acetobacter xylinum generated BC using various carbon sources. Fibers were treated with phosphoric acid to phosphorylate functional groups and preconditioned with calcium to nucleate the HA. Simulated body fluid (SBF) furthered the growth. Over 14 days, the product was characterized via EDX, SEM, FTIR, and XRD. The effect of media composition, phosphorylation time, pretreatment, and …

A New Multilayer Composite With Functionally Graded Design For Endodontic Application., Ahmed A. Madfa

Ahmed A. Madfa

Multilayer composite with FG structure were fabricated using zirconia (ZrO), alumina (AI2O3), Hydroxyapatite (HA) and titanium (Ti) micropowders. Powder selection and their combination in each layer were according to the results of finite element analysis.

Microstructural Characteristics Of Functionally Graded Materials Designed As Dental Post, Ahmed A. Madfa

Ahmed A. Madfa

To study the interfaces and microstructure of multilayered materials fabricated based on functionally graded concept for use as dental posts.

New Generation Of The Dental Posts For Endodontic Application., Ahmed A. Madfa

Ahmed A. Madfa

Fabricated multilayer dental post with the functionally graded design is a novel product that exhibits graded properties varied from coronal to apical parts of the tooth. The new dental post definitely performs better than posts available in the market and improves the quality of human life

The Role Of Surface Characteristics In The Initial Adhesion Of Human Bone-Derived Cells On Ceramics, H. Zreiqat, O. C. Standard, T. Gengenbach, J. G. Steele, C. R. Howlett

Cells and Materials

The tissue/biomaterial interactions of three biomaterials of potential use in bone implants were studied in vitro. The mechanism of cell adherence to various ceramic substrata has been investigated by measurement of short term (90 minutes) cell attachment and spreading rate. We have determined the effect of two serum glycoproteins, fibronectin and vitronectin, on the adhesion of human bone derived cells (HBD-cells) cultured on three different types of ceramics {alumina (Al₂O₃), hydroxyapatite (HAP) and yttria-doped tetragonal zirconia polycrystal (Y-TZP)} . The attachment of HBD-cells to alumina and hydroxyapatite was approximately 60% of that to Y-TZP. Furthermore, …