Automotive Engineering Commons^™

Design And Implementation Of An Oxidation Catalyst For A Spark Ignited Two Stroke Snowmobile Engine, Noah Squires

Dissertations, Master's Theses and Master's Reports

Spark ignited two stroke engines are under increasing pressure as emissions standards become stricter, making them a perfect candidate for a catalytic aftertreatment system. Yet several significant challenges to catalysis exist. Namely two stroke exhaust systems are very sensitive to back pressure changes and high emissions concentrations can make controlling the temperature of the catalytic reaction difficult. Therefore, it is imperative that a two stroke specific catalyst design process be developed. This project focused on beginning to develop such a design process. Key results of this work include finding a location for the catalyst in the exhaust system that offers …

Effects Of Variable Valve Actuation On Exhaust Enthalpy And Engine Out Emissions, Zakarie Parker

Dissertations, Master's Theses and Master's Reports

Vehicle emissions standards are becoming increasingly more strict as time progresses. Once all of the emissions devices are in their operational stage, these standards can be met with reasonable effort in powertrain design and calibration. However, the core of this system, the three-way catalyst, is non-operational until it has reached 200-350⁰C. Because of this, cold-start catalyst heating is extremely important in new vehicles. The objective of this project was to improve catalyst heating without increasing engine-out emissions. It was decided that the sensible heat portion of the exhaust enthalpy would be the best metric to judge differences between the different …

Reduction Of Nox Emissions In A Single Cylinder Diesel Engine Using Sncr With In-Cylinder Injection Of Aqueous Urea, Anthony Timpanaro

UNF Graduate Theses and Dissertations

The subject of this study is the effect of in-cylinder selective non-catalytic reduction (SNCR) of NO_x emissions in diesel exhaust gas by means of direct injection of aqueous urea ((NH₂)₂CO) into the combustion chamber. A single cylinder diesel test engine was modified to accept an electronically controlled secondary common rail injection system to deliver the aqueous urea directly into the cylinder during engine operation.

Direct in-cylinder injection was chosen in order to ensure precise delivery of the reducing agent without the risk of any premature reactions taking place. Unlike direct in-cylinder injection of neat water, …

Reduced Exhaust Emissions Through Blending N-Butanol With Ultra Low Sulfur Diesel And Synthetic Paraffinic Kerosene In Reactivity Controlled Compression Ignition Combustion, Remi Gaubert

Electronic Theses and Dissertations

Increasing restrictions on the emitted exhaust emissions in diesel engines are becoming a more challenging task than in previous years. An electronic common rail fuel injection system and a port fuel injection (PFI) system were developed for an experimental engine to research dual fuel combustion. The experimental research was conducted at 1500 rpm and 4, 5, and 6 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at a 60% by mass fraction coupled with direct injection (DI) of three fuels, including ultra-low sulfur diesel (ULSD RCCI), a 50-50 wt-% blend of ULSD and butanol (ULSD-Bu RCCI), and …

Test Cell Set-Up To Enable Drive-Cycle Testing Of A Variable Valve Actuation Enabled Camless Diesel Engine, Alexander Harrison Taylor

Open Access Theses

The previous facility which was used for engine testing at Purdue's Ray W. Herrick Laboratories utilized an eddy current dynamometer which is only suited for steady-state testing and throttle snaps. To better utilize a pre-existing camless diesel engine, which is is enabled via variable valve actuation, it was desired to perform transient drive-cycle tests. To accomplish this goal, a variable frequency drive AC dynamometer was required. Given that a brand new facility was constructed, the team was presented with an opportunity for ground up design of a test cell.

The new test cell's operation was proved out using a cammed …

An Experimental Investigation Into The Effect Of Particulate Matter On Nox Reduction In A Scr Catalyst On A Dpf, Saksham Gupta

Dissertations, Master's Theses and Master's Reports

The study of NO_x reduction across the SCRF^® is presented in this report to understand the inlet and outlet NO, NO₂, NH₃ species from the SCRF^®. The SCRF^® is a prototype SCR catalyst on a Diesel Particulate Filter (DPF) that reduces NOx and PM at the downstream location. The SCRF^® reduces the packaging volume of the aftertreatment components in order to reduce the cost, volume and weight of the aftertreatment system. A total of 12 experiments were performed on a Cummins ISB 2013 280 hp engine and the aftertreatment system. The …

Computational Fluid Dynamics Modeling Of The Effects Of Water Injection In A Diesel Engine, Rabun Z. Wallace

Electronic Theses and Dissertations

Water injection has been used in internal combustion engines for many years. It has been used to cool combustion temperatures, reduce emissions, and in some instances clean carbon buildup from the cylinder. Research has shown that the water to fuel mass ratio is most effective between 20-30%, so the upper and lower limit were used for simulations in Converge CFD. To validate the CFD model, a case without water injection was compared to experimental data from Sandia National Laboratory. The predicted in-cylinder pressure and heat release rate showed good agreement with the experimental data. Cases were run with the injection …

The Effects Of Low-Level Ethanol Blends In 4-Stroke Small Non-Road Engines, Chris Reek

All Graduate Theses, Dissertations, and Other Capstone Projects

Small Non-Road Engines (SNRE's) abound in numbers and are used daily by consumers and businesses alike. Considering the atmosphere of change looming in the air regarding alternative fuels, this particular engine classification will also be affected by any change in standardization of fuels. This body of research attempts to address possible ways SNRE's can change their operational characteristics after being fueled by specific yet differing fuels. These characteristics will be contrasted against blends of ethanol with gasoline, from 0% ethanol to 20% ethanol, run on test engines to determine patterns, if any, of these characteristics. Topics include: materials compatibility, engine …