Automotive Engineering Commons^™

Accessible Autonomy: Exploring Inclusive Autonomous Vehicle Design And Interaction For People Who Are Blind And Visually Impaired, Paul D. S. Fink

Electronic Theses and Dissertations

Autonomous vehicles are poised to revolutionize independent travel for millions of people experiencing transportation-limiting visual impairments worldwide. However, the current trajectory of automotive technology is rife with roadblocks to accessible interaction and inclusion for this demographic. Inaccessible (visually dependent) interfaces and lack of information access throughout the trip are surmountable, yet nevertheless critical barriers to this potentially lifechanging technology. To address these challenges, the programmatic dissertation research presented here includes ten studies, three published papers, and three submitted papers in high impact outlets that together address accessibility across the complete trip of transportation. The first paper began with a thorough …

Parametric Automobile And Open-Jet Wind Tunnel Models And Their Application To Improved Drag Coefficient Corrections, Matthew Fujs

Electronic Theses and Dissertations

The simulation of automotive wind tunnel flow around a vehicle typically relies on the use of simplified models due to the complex, and often proprietary geometries of real test configurations. Current simplified models achieve a low computational cost in computational fluid dynamics (CFD) but fall short at qualitatively capturing a modern vehicle’s complex geometry due to being overly abstract; other models are more accurate but offer only discrete dimensional configurations. The first part of this thesis describes new parametric models for both vehicles and open-jet wind tunnels which aim to represent widely varying geometries through continuous dimensional variability, while remaining …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

Electronic Theses and Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Reduced Fuel Emissions Through Connected Vehicles And Truck Platooning, Paul D. Brummitt

Electronic Theses and Dissertations

Vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication enable the sharing, in real time, of vehicular locations and speeds with other vehicles, traffic signals, and traffic control centers. This shared information can help traffic to better traverse intersections, road segments, and congested neighborhoods, thereby reducing travel times, increasing driver safety, generating data for traffic planning, and reducing vehicular pollution. This study, which focuses on vehicular pollution, used an analysis of data from NREL, BTS, and the EPA to determine that the widespread use of V2V-based truck platooning—the convoying of trucks in close proximity to one another so as to reduce air drag …

Developing Takeover Request Warning System To Improve Takeover Time And Post-Takeover Performance In Level 3 Automated Drivin, Niloy Talukder

Electronic Theses and Dissertations

The automotive industry is shifting towards partial (level 3) or fully automated vehicles. An important research question in level 3 automated driving is how quickly drivers can take over the vehicle control in response to a critical event. In this regard, this study develops an integrated takeover request (TOR) system which provides visual and auditorial TOR warning in both vehicle interface and personal portable device (e.g., tablet). The study also evaluated the effectiveness of the integrated TOR system in reducing the takeover time and improving post-takeover performance. For these purposes, 44 drivers participated in the driving simulator experiment where they …

Numerical Prediction Of The Impact Response Of Tailored 1500 Mpa And 2000 Mpa Press Hardening Boron Steel, Joseph Guignard

Electronic Theses and Dissertations

This thesis investigates the response of 1500 MPa and 2000 MPa press hardening steel (PHS) in a dynamic crushing scenario. The work involves creating numerical models to simulate tailored channel sections. The zones of different hardness are created using the tailored hot stamping process (THS), where a heated die set is used to quench an austenitized blank to produce parts with zones of differentiating hardness.

The 1500 MPa PHS was quenched using a die heated to different temperatures to produce a range of microstructures (225 HV to 473 HV) as well as the 2000 MPa PHS (297 HV to 574 …

Redesign And Benchmarking Of Electric Vehicle Batteries For Demanufacturing For Secondary Life Applications In The Circular Economy, Abhay Singh Rathaur

Electronic Theses and Dissertations

As per the latest records, the transportation sector is the second largest in energy consumption and plays a major role in air pollution and co2 emission. One solution to curb this pollution and release of hazardous gases is li-ion batteries by electrifying the vehicles. However, these batteries have one factor over here: once EV batteries reach 70-80% charge holding capacity, they are not good enough for traction in the vehicle. Therefore, replacing these batteries with a new ones is necessary. However, these discarded batteries have enough charge holding capacity, which can be used in secondary applications called second- …

Effects On Vehicle Ride Comfort Of An Adaptive Suspension System Using Neural Networks, Sylvia Yin Zhixian

Electronic Theses and Dissertations

Suspension systems in the auto industry have always been a topic of interest, as they relate to so many aspects of vehicles. Various types of suspension are commonly used now, such as passive suspensions, semi-active suspensions and active suspensions. However, the current technology mainly focuses on the change of damping ratio. The aim of this thesis is to consider both spring and damper properties for suspensions of an off-road vehicle. In order to do this, a 10-degree of freedom model was built using the EoM software in Julia. The output state space matrices from EoM were used as an input …

Bake-Hardening Of Aluminum Alloys For Automotive Applications: Influence Of Temperature, Time And Pre-Strain Parameters, Giorgio Rolle

Electronic Theses and Dissertations

An experimental evaluation of the effect of bake hardening on aluminum alloys for automotive lightweight applications is developed through tensile tests and dent tests. All the alloys belong to the 6xxx series and include high formability alloys, improved hemming types and improved bake response alloys. An experimental matrix which contains different time-temperature baking conditions is built, and two pre-strain conditions are considered: no pre-strain and 2% pre-strain. A suitable testing phase is designed to be as much representative as possible of the actual manufacturing process of an automotive panel. After a data analysis phase performed by means of MATLAB software, …

Enabler Methodology To Use A Dynamic Simulator To Develop Global Vehicles, Manuella Maria Aleci

Electronic Theses and Dissertations

The international car manufacturer Stellantis designs and produces vehicles for fourteen brands. Some brand characteristics satisfy both the European and North American market (e.g., Jeep), while others primarily target one market or the other. Efforts have been made recently to harmonize design and development processes within the global company. The cornerstone of this project is the subjective assessment procedure performed on the dynamic driving simulator, a newly developed technology that reduces time and cost during the development phase of a new car model. The technology can be used prior to the production of physical prototypes, allowing the assessment of handling …

Analysis Of Combustion In Plasma Electrolytic Oxidation (Peo) Coatings Of The Piston Surface In Spark Ignition Engines, Brendon Bain

Electronic Theses and Dissertations

With the global effort to “green” the transportation industry, the internal combustion engine (ICE) is required to reduce its carbon footprint and can do so by increasing efficiency. Plasma Electrolytic Oxidation (PEO) coatings confer properties of high wear and corrosion resistance, high hardness, excellent adhesion and a superior thermal barrier to their substrate, suggesting that coating of ICE components has the potential to greatly improve the combustion efficiency. The primary objective of this thesis is to analyze the effects of PEO coating on the surface of pistons in a spark ignition ICE, with the goal of increasing efficiency, to address …

Analysis Of Bio-Alcohols With Mie-Scattering And Ltc For Lowered Emissions In Pcci, Cesar E. Carapia

Electronic Theses and Dissertations

An investigation was conducted on the optimal engine parameters for facilitating lower NOX and soot emissions of PCCI combustion with either ethanol or n-butanol. The PFI fuels selected were tested at loads of 3, 4, and 5 Bar IMEP for a total of 28 total combustion tests with variations made to the EGR% and boost pressure for each test in order to find the optimal emissions strategy. A Mie-scattering spray fuel analysis was also conducted on the three fuels to gain insight on their influence on combustion/emissions characteristics. It was found that ethanol had a greater average Sauter Mean Diameter …

Numerical Study Of The Impact Of Dme Blending On Emissions From A Compression Ignition Engine, Hongwei Lei

Electronic Theses and Dissertations

Translate

Compression ignition (CI) engines and diesel fuel are commonly used for long-distance transportation, marine transportation, and construction equipment due to their high thermal efficiency and relatively low cost. Meanwhile, compression ignition (CI) engine emissions such as CO, NOx, and soot cause human health issues, climate change, and pollution problems. To reduce emissions, especially by restraining the formation of soot, some new energy resources are researched for replacing diesel fuel.

Dimethyl ether (DME) is one kind of new energy resource with four main advantages: high cetane number, low auto-ignition temperature, simple chemical structure, and high oxygen content. A wide range …

Efficient Design Of Integrated Underbody And Battery Pack For Battery Electric Vehicles, Gabriele Rosso

Electronic Theses and Dissertations

Climate change and the consequent more restrictive regulations are pushing the industry towards higher efficiency and lower emissions means of transport. The road transport sector is deeply affected, leading the main Original Equipment Manufacturers (OEMs) to start the transition to alternative powertrains, among which Battery Electric Vehicles (BEVs) are the faster-growing.

The large, heavy, and safety-critical battery pack asks for a specific optimized solution for a lightweight and high-performance vehicle platform.

In this research, a first benchmarking analysis is presented to study the current state-of-the-art for BEV underbody and battery pack designs. Following this investigation, a classification scheme was designed …

Mixed Reality Application For Inspection And Validation In Industrial Environments: Human Performance And Brain-Computer Interface Advantages Over Gestures, Silvio Da Col

Electronic Theses and Dissertations

Shortening product development cycles demand increasingly efficient methods and tools for the planning of complex production systems. Recently, augmented reality (AR) technologies have been introduced in manufacturing planning functions. Working in augmented environments, users usually select virtual objects with hand gestures that are associated with arm fatigue.

In the first study, a mixed reality (MR) application for inspection and validation of a production line has been developed. The application allows to show the virtual environment in Augmented/Mixed Reality, and it allows to import three-dimensional (3D) CAD with information and structure in a specific position. The application makes the user interacting …

Quantification Of Velocity At The Sparkplug In A Lab Scale Combustion Chamber, Mayur Panduranga Kodikal

Electronic Theses and Dissertations

Lean burn has been considered an effective strategy to improve the thermal efficiency of spark-ignition engines. Under lean or diluted conditions, however, the combustion speed is reduced. Therefore, to speed up the combustion, in-cylinder turbulence is induced which may impede the spark initiation. This research aims to quantify the turbulence in a constant volume optical combustion chamber.

An Improved Delayed Detached Eddy Simulation (IDDES) study was done to understand the turbulence characteristics of the flow in the optical chamber. Spark anemometry was used to obtain a relationship between the spark plasma evolution and freestream velocity. Finally, this technique has been …

Subjective Evaluation Of Vehicle Semi-Active Suspension For Improved Ride And Handling, Zachery Sinasac

Electronic Theses and Dissertations

The number of passenger cars currently equipped with semi-active suspensions has been steadily increasing in recent decades. These suspension systems provide an improvement in ride and handling when compared to passive suspensions. Currently, the approach to evaluating and tuning semi-active suspensions has been limited to objective methods or time-consuming alterations made on physical components. To alleviate the time and costs and improve the fidelity of such methods, a novel solution to subjectively evaluating vehicle semi-active suspensions is presented. The subjective evaluation method herein involves the use of a state-of-the-art dynamic driving simulator with drivers to subjectively evaluate and tune virtual …

The Impact Of High Voltage Electrode Diameter On Spark Discharge Process, Jiaming Zhang

Electronic Theses and Dissertations

The ever-growing demands to meet the exhaust emission regulations and fuel economy requirements, drive the development of modern spark ignition (SI) engines towards lean or diluted conditions at boosted intake pressure and with intensified charge motions. Boosted in-cylinder pressure conditions require additional energy to initiate the spark discharge, thereby challenging the ignition system. Additionally, the geometry of the spark plug has a profound influence on the spark discharge characteristics. The main objective of this research is to study the impact of high voltage electrode diameter on breakdown voltage and equivalent spark gap resistance at elevated background pressures (1-25 bar abs.). …

Correlation Between Microstructure And Mechanical Properties Of Press-Hardenable Steels For Various Quenching Rates, Radha Thakkar

Electronic Theses and Dissertations

Manufacturing structural automotive components by hot stamping advanced high strength steel sheets with tailored mechanical properties helps to reduce vehicle weight and improve crashworthiness. The purpose of this research work is to establish a relationship between the die temperature in hot stamping, the corresponding as-quenched microstructural features and mechanical properties. A series of experiments were carried out in which 1.4 mm 22MnB5 and 1.4 mm 37MnB4 steel sheet specimens were austenitized to 930°C and quenched between dies preheated to different temperatures. The mechanical properties were determined from tensile tests and hardness measurements and the corresponding microstructures were analyzed. It was …

Interfacial Heat Transfer In Squeeze Casting Of Cast Al Alloy A380 And Mg Alloy Az91 And Wrought Alloy Az31, Luyang Ren

Electronic Theses and Dissertations

The weight reduction of vehicles and airplanes in the automotive and aerospace industries is urgently needed due to the government regulation and market demand. To satisfy engineering performance of lightweight auto and aero components, high strength light alloys such as aluminum (Al) or magnesium (Mg) alloys are usually adopted. This study was intended to explore a solution for casting high strength cast and wrought Al and Mg alloys. Before light alloys can be utilized for mass production, critical processing parameters need to be accurately determined. The interfacial heat transfer coefficient is one of the most important factors in casting processes. …

Mechanical Properties Of Nanomodified Hybrid Gfrp Composite Materials, Micah Rop Kimutai

Electronic Theses and Dissertations

The mechanical behavior of the nanomodified hybrid epoxy matrix was investigated in glass fiber reinforced plastics (GFRP). In this study, five nanocomposites enriched with as received halloysite, nanomer I.28E, HNT-APTES, and the hybrid combinations of the two HNTs with the nanomer I.28E were successfully fabricated. To evaluate the effects and morphological characteristics of the individual fillers and the hybrid configurations on the epoxy resin matrix, TGA, DSC, and DMA were analyzed. To understand the effect of the five configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were …

Quantitative Performance Assessment Of Lidar-Based Vehicle Contour Estimation Algorithms For Integrated Vehicle Safety Applications, David M. Mothershed

Electronic Theses and Dissertations

Many nations and organizations are committing to achieving the goal of `Vision Zero' and eliminate road traffic related deaths around the world. Industry continues to develop integrated safety systems to make vehicles safer, smarter and more capable in safety critical scenarios. Passive safety systems are now focusing on pre-crash deployment of restraint systems to better protect vehicle passengers. Current commonly used bounding box methods for shape estimation of crash partners lack the fidelity required for edge case collision detection and advanced crash modeling. This research presents a novel algorithm for robust and accurate contour estimation of opposing vehicles. The presented …

Reduced Exhaust Emissions Through Blending N-Butanol With Ultra Low Sulfur Diesel And Synthetic Paraffinic Kerosene In Reactivity Controlled Compression Ignition Combustion, Remi Gaubert

Electronic Theses and Dissertations

Increasing restrictions on the emitted exhaust emissions in diesel engines are becoming a more challenging task than in previous years. An electronic common rail fuel injection system and a port fuel injection (PFI) system were developed for an experimental engine to research dual fuel combustion. The experimental research was conducted at 1500 rpm and 4, 5, and 6 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at a 60% by mass fraction coupled with direct injection (DI) of three fuels, including ultra-low sulfur diesel (ULSD RCCI), a 50-50 wt-% blend of ULSD and butanol (ULSD-Bu RCCI), and …

Live Versus Virtual: Cost Benefit Analysis For Applying Simulation Towards Army Aviator Flight Minimums, Dylan Morelle

Electronic Theses and Dissertations

The Longbow Crew Trainer (LCT) is a cost effective, safe alternative to live training in the AH-64D/E Apache helicopter. Current Army doctrine and regulations have provisions for the limited use of simulator in lieu of aircraft hours toward semiannual minimum flight hour requirements. With the defense budget in decline, the Army must find innovative, cost effective methods to conduct realistic, relevant training to sustain proficiency in their warfighting capabilities. The LCT fully replicates the cockpit environment through training scenarios for requisite crew tasks and missions in a realistic, modular, and transportable solution. An attack helicopter crew can safely train in …

The Impact Of Automation Reliability And Fatigue On Reliance, Ryan Wohleber

Electronic Theses and Dissertations

The objective of this research is to inform the design of dynamic interfaces to optimize unmanned aerial vehicle (UAV) operator reliance on automation. A broad goal of the U.S. military is to improve the ratio of UAV operators to UAVs controlled. Accomplishing this goal requires the use of automation; however, the benefits of automation are jeopardized without appropriate operator reliance. To improve reliance on automation, this effort sought to accomplish several objectives organized into phases. The first phase aimed to validate metrics that could be used to gauge operator fatigue online, to understand how the reliability of automated systems influences …

Objective Predictor Metric Of Annoyance For Hydraulic Engine Mount Cavitation, John Powell

Electronic Theses and Dissertations

Vehicle acoustics has been found to have a direct impact on customer experience. Unexpected noises play a role in this experience. Hydraulic engine mount cavitation, the noise heard from the collapse of vapor bubbles in the mount, is considered one of those unexpected noises. During the design phase of a vehicle when an unexpected noise is found there is a need for a method to quantify how much of the noise is too much. Subjective evaluations alone are not enough due to variability from engineer to engineer. An objective way needed to be developed in order to evaluate the cavitation …

Computational Fluid Dynamics Modeling Of The Effects Of Water Injection In A Diesel Engine, Rabun Z. Wallace

Electronic Theses and Dissertations

Water injection has been used in internal combustion engines for many years. It has been used to cool combustion temperatures, reduce emissions, and in some instances clean carbon buildup from the cylinder. Research has shown that the water to fuel mass ratio is most effective between 20-30%, so the upper and lower limit were used for simulations in Converge CFD. To validate the CFD model, a case without water injection was compared to experimental data from Sandia National Laboratory. The predicted in-cylinder pressure and heat release rate showed good agreement with the experimental data. Cases were run with the injection …

Techniques For Assessing And Improving Performance In Navigation And Wayfinding Using Mobile Augmented Reality, Brian Goldiez

Electronic Theses and Dissertations

Augmented reality is a field of technology in which the real world is overlaid with additional information from a computer generated display. Enhancements to augmented reality technology presently support limited mobility which is expected to increase in the future to provide much greater real world functionality. This work reports on a set of experiments that investigate performance in search and rescue navigating tasks using augmented reality. Augmentation consisted of a spatially and temporally registered map of a maze that was overlaid onto a real world maze. Participants were required to traverse the maze, answer spatially oriented questions in the maze, …