Automotive Engineering Commons^™

Enhancing Bridge Resilience And Overheight Vehicle Mitigation Through Innovative Sacrificial Cushion Systems, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Transportation departments have made significant strides in addressing the challenges posed by the increasing weights of trucks on bridges. While there is a growing awareness of overheight vehicle collisions with bridges, implementing effective countermeasures remains limited. The susceptibility of bridges to damage from such collisions is on the rise, further exacerbated by unpredictable lateral impact forces. This study employs nonlinear impact analysis to assess the response of an unprotected vehicle-girder model, yielding realistic deformation outcomes comparable to observed impacts on the US-61 bridge. Predictions for a truck traveling at 112.65 km/h indicate deformations of 0.229 m, 0.161 m, and 0.271 …

Are Ride-Hailing Services Safer Than Taxis? A Multivariate Spatial Approach With Accomodation Of Exposure Uncertainty, Guocong Zhai, Kun Xie, Hong Yang, Di Yang

Civil & Environmental Engineering Faculty Publications

Despite many research efforts on ride-hailing services and taxis, limited studies have compared the safety performance of the two modes. A major challenge is the need for reliable mode-specific exposure data to model their safety outcomes. Moreover, crash frequencies of the two modes by injury severities tend to be spatially and inherently correlated. To fully address these issues, this study proposes a novel multivariate conditional autoregressive model considering measurement errors in mode-specific exposures (MVCARME). More specially, a classical measurement error structure is used to accommodate the uncertainty of mode-specific exposures estimated, and a multivariate spatial specification is adopted to capture …

Influence Of Level 1 And Level 2 Automated Vehicles On Fatal Crashes And Fatal Crash Occurrence, Hardik Gajera, Srinivas S. Pulugurtha, Sonu Mathew

Mineta Transportation Institute Publications

Connected and automated vehicles (CAVs) are expected to improve safety by gradually reducing human decisions while driving. However, there are still questions on their effectiveness as we transition from almost 0% CAVs to 100% CAVs with different levels of vehicle autonomy. This research focuses on synthesizing literature and identifying risk factors influencing fatal crashes involving level 1 and level 2 CAVs in the United States. Fatal crashes involving level 0 vehicles—ones that are not connected and automated—were compared to minimize unobserved heterogeneity and randomness associated with the influencing risk factors. The research team used the fatal crash data for the …

Development And Testing Of Braking And Acceleration Features For Vehicle Advanced Driver Assistance System, Johann Carlo Marasigan, Gian Paolo Mayuga, Elmer R. Magsino

Electronics, Computer, and Communications Engineering Faculty Publications

Traffic congestion is a constant problem for cities worldwide. The human driving inefficiency and poor urban planning and development contribute to traffic buildup and travel discomfort. An example of human inefficiency is the phantom traffic jam, which is caused by unnecessary braking, causing traffic to slow down, and eventually coming to a stop. In this study, a brake and acceleration feature (BAF) for the advanced driver assistance system (ADAS) is proposed to mitigate the effects of the phantom traffic phenomenon. In its initial stage, the BAF provides a heads-up display that gives information on how much braking and acceleration input …

Engineering Countermeasures For Left Turns At Signalized Intersections: A Review, Siby Samuel, Amandeep Singh, Yusuke Yamani

Psychology Faculty Publications

Left turn crashes can impact the safety of the drivers due to the speed and angle at which they occur. Left turns are specifically reported to affect older drivers more than the other types of crashes. This paper provides a review of the existing engineering countermeasures that have been evaluated to improve driver safety at left turns. Twenty- eight studies on left turn signal displays (protected left turns, flashing yellow arrow, and digital countdown timers), intersection geometry (offset left turn lanes, diverging diamond interchange, roundabouts, exit lanes for left turn, left turn bay extension, and contraflow left turn lanes), and …

Save-T: Safety Analysis Visualization And Evaluation Tool, Yuan Zhu, Sami Demiroluk, Kaan Ozbay, Kun Xie, Hong Yang, Di Sha

Civil & Environmental Engineering Faculty Publications

Traffic crashes are one of the biggest issues which constitute a threat to lives of the motorists and disrupt operations of the transportation system. To reduce the number of crashes and alleviate their impacts, it is necessary to scrutinize the factors contributing to the risk of traffic crashes. Lately, visual analytics tools become very popular for data exploration and obtaining insights from the data. In this paper, a new web-based data visualization tool called Safety Analysis Visualization and Evaluation Tool (SAVE-T) was introduced. This tool enables users to interactively create queries and visually explore the results. By utilizing an online …

Non-Conventional Vehicles As A Way Towards Carbon Neutrality In Iceland, Julia Sokolowska

Independent Study Project (ISP) Collection

Paris Agreement’s chief objective is to protect the Earth and its inhabitants from a point of no return, when the effects of climate change will be so intense that they will shift the equilibrium of ecosystems. The distinctiveness of this international environmental treaty is that it does not impose climate change mitigation measures, but rather allows nation states to create their own set of measures, the NDCs, to reach the global warming of ‘well below 2oC’ by the end of the century. Thus, Iceland has submitted its own NDC, the Climate Action Plan 2018-2030, which has an ambitious goal of …

Development Of An Improved Arterial Roadway Performance Reliability Methodology, Ernest Tufuor

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The need for reliable performance measures of urban arterial roadways is increasing because of the rise in traffic congestion and the high value of travel time. Consequently, travel time reliability (TTR), which combines components of measures of central tendency and measures of dispersion of travel times, has recently received considerable research interest.

The basis of all TTR metrics is the travel time distribution (TTD). Estimating and forecasting arterial TTDs for TTR analysis is the focus of this dissertation. This dissertation proposes a new TTR methodology that is a marked improvement on recent TTR estimation and forecasting methodologies including the current …

Vehicle Performance Analysis Of An Autonomous Electric Shuttle Modified For Wheelchair Accessibility, Johan Fanas Rojas

Masters Theses

Autonomous vehicles (AV) have the potential to vastly improve independent, safe, and cost-effective mobility options for individuals with disabilities. However, accessibility considerations are often overlooked in the early stages of design, resulting in AVs that are inaccessible to people with disabilities. The needs of wheeled mobility device users can cause significant vehicle design changes due to requirements for stepless ingress/egress and increased space for onboard circulation and securement. Vehicles serving people with disabilities typically require costly aftermarket modifications for accessibility, which may have unforeseen impacts on vehicle performance and safety, particularly in the case of automated vehicles. In this research, …

The Future State Of Mobility, Jerome Quandt

Purdue Road School

Formed in 2018, the Illinois Autonomous Vehicles Association (ILAVA) is a privately funded non-for-profit organization focused on establishing thought leadership in the state of Illinois, by identifying and addressing the current and emerging opportunities related to the inevitable growth of CAV technologies throughout the transportation network. Through the deployment of scalable and sustainable business solutions, facilitating industry education and establishing thought leadership, ILAVA is creating an ecosystem that defines Illinois as #TheFutureStateofMobility.

Degrader Analysis For Diagnostic And Predictive Capabilities: A Demonstration Of Progress In Dod Cbm+ Initiatives, William Baker, Steven Nixon, Jeffrey Banks, Karl Reichard, Kaitlynn Castelle

Engineering Management & Systems Engineering Faculty Publications

This paper presents a modified reliability centered maintenance (RCM) methodology developed by The Applied Research Laboratory at The Pennsylvania State University (ARL Penn State) to meet challenges in decreasing life cycle sustainment costs for critical Naval assets. The focus of this paper is on the requirements for the development of the on-board Prognostics and Health Management (PHM) system with a discussion on the implementation progress for two systems: the high pressure air compressor (HPAC), and the advanced carbon dioxide removal unit (ACRU). Recent Department of Defense (DoD) guidance calls for implementing Condition Based Maintenance (CBM) as an alternative to traditional …

The Covid-19 Pandemic And Transportation Engineering, Chris Hendrickson,, Laurence Rilett

Department of Civil and Environmental Engineering: Faculty Publications

The COVID-19 pandemic has been an enormous global disruption with immense economic, environmental, and social impacts throughout the world. Only world wars and the flu pandemic of 1918 are comparable in the wide range of consequences, including fatalities, over a relatively short period of time. Unfortunately, we can expect other major disruptions to occur in the future. In this editorial, we intend to discern some lessons for the transportation engineering profession that can be learned from the current catastrophe that can help us prepare for future disruptions. We will ignore nontransportation aspects of the pandemic such as the development of …

Impact Of Smart Phones’ Interaction Modality On Driving Performance For Conventional And Autonomous Vehicles, Francesca M. Favarò

Mineta Transportation Institute Publications

Distracted driving related to cell phone usage ranks among the top three causes of fatal crashes on the road. Although forty-eight of 50 U.S. states allow the use of personal devices if operated hands-free and secured in the vehicle, scientific studies have yet to quantify the safety improvement presumed to be introduced by voice-to-text interactions. Thus, this study investigated how different modes of interaction of drivers with a smart phone (i.e., manual texting vs. vocal input) affect drivers’ distraction and performance in both conventional and semi-autonomous vehicles. The study was executed in a full-car integrated simulator and tested a population …

Analysis Of Disengagements In Semi-Autonomous Vehicles: Drivers’ Takeover Performance And Operational Implications, Francesca M. Favaro, Sky Eurich, Syeda Rizvi, Shivangi Agarwal, Sumaid Mahmood, Nazanin Nader

Mineta Transportation Institute Publications

This report analyzes the reactions of human drivers placed in simulated Autonomous Technology disengagement scenarios. The study was executed in a human-in-the-loop setting, within a high-fidelity integrated car simulator capable of handling both manual and autonomous driving. A population of 40 individuals was tested, with metrics for control takeover quantification given by: i) response times (considering inputs of steering, throttle, and braking); ii) vehicle drift from the lane centerline after takeover as well as overall (integral) drift over an S-turn curve compared to a baseline obtained in manual driving; and iii) accuracy metrics to quantify human factors associated with the …

Crash Severity Analysis Of Rear-End Crashes In California Using Statistical And Machine Learning Classification Methods, Alidad Ahmadi, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

Investigating drivers’ injury level and detecting contributing factors that aggravate the damage level imposed on drivers and vehicles is a critical subject in the field of crash analysis. In this study, a comprehensive vehicle-by-vehicle crash data set is developed by integrating 5 years of data from California crash, vehicles involved, and road databases. The data set is used to model the severity of rear-end crashes for comparing three analytic techniques: multinomial logit, mixed multinomial logit, and support vector machine (SVM). The results of the crash severity models and the role of contributing factors to the severity outcome of rear-end crashes …

Does Length Of Ride, Gender Or Nationality Affect Willingness To Ride In A Driverless Ambulance?, Stephen Rice, Scott R. Winter, Rian Mehta, Joseph R. Keebler, Bradley S. Baugh, Emily C. Anania, Mattie N. Milner

Publications

Due to the frequent lack of ambulances and personnel, the purpose of this study was to examine consumers’ willingness-to-ride in an ambulance that was either driven by a human driver or completely automated (with no human driver) based on the gender of the participant and their nationality, either Indian or American. A two-study experimental design was utilized using over 1,000 participants. In Study 1, the length of the ride and the type of driver were manipulated while in Study 2, the length of the ride was manipulated across genders and nationality. Study 2 also collected affect measures to complete a …

Development Of Iowa Dot Combination Bridge Separation Barrier With Bicycle Railing, Chaz M. Ginger

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The Iowa Department of Transportation typically builds separation barriers between vehicle and pedestrian/bicycle facilities when sidewalks or trails are present on vehicular bridges. Currently, Iowa DOT employs a combination bridge rail that utilizes a concrete parapet that previously had been successfully evaluated to National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 4 (TL-4) criteria for these situations. While the parapet had been successfully evaluated, the combination bridge rail system as a whole had not been evaluated to any crash test standards. Iowa DOT desired that researchers at Midwest Roadside Safety Facility (MwRSF) design and test a combination bridge …

Diesel Particulate Generation, Matthew Ferdenzi

Honors Theses

The goal of this project is to design a diesel particulate generator to test aerogels as diesel particulate filters. Diesel particulate generators are machines that generate diesel particulate matter, or diesel soot. Diesel particulate filters have been recently put into the market to help many car companies meet the ever-changing diesel emission regulations set by the EPA and other international agencies. The main goal of the filter is to block soot from exiting to the environment. Once the filter is full, the soot is oxidized and released. The problem with these filters is that they are large, costly, detrimental to …

Internet Enabled Remote Driving Of A Combat Hybrid Electric Power System For Duty Cycle Measurement, Jarrett Goodell, Marc Compere, Wilford Smith, Mark Brudnak, Mike Pozolo, Et Al.

Marc Compere

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware, both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1,7]. This paper is written in the context of [1,7] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Energy System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Indicators Of Assessing Vehicle Safety Status Under Platoon Conditions At Freeway, Jianan Zhou

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Issue on level freeway segment (Interstate 80) in Nebraska: • High truck percentage (higher than 25%) • Different speed profile - The speed of trucks are set to 67 mph, on average. - The speed of passenger cars are 75 mph, on average. • Result platoons - Approximately 85% of vehicles are observed in platoon. - the degree of freedom to maneuver for drivers are constrained by other in-platoon vehicles. - Vehicles in platoons may face unsafe situation. Goal: Develop indicators to assess the safety status of vehicles under platoon conditions at level freeway segment.

The data were collected at …

Development Of A Test Level 3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, David Gutierrez, Ronald K. Faller, John D. Reid, Phil Tenhulzen

Department of Civil and Environmental Engineering: Faculty Publications

Road construction often requires that work zones be created and shielded by portable concrete barriers (PCBs) to protect workers and equipment from errant vehicles as well as to prevent motorists from striking other roadside hazards. For an existing W-beam guardrail system installed adjacent to the roadway and near the work zone, guardrail sections are removed so a PCB system can be placed. A study was done to develop a crashworthy transition between W-beam guardrail and PCB systems. Design concepts were developed and refined through computer simulation with LS-DYNA. Additionally, a study of critical impact points was conducted to determine impact …

Calibrating The Robertson’S Platoon Dispersion Model On A Coordinated Corridor With Advance Warning Flashers, Zhao Li, Laurence Rilett, Ernest Tufuor

Department of Civil and Environmental Engineering: Faculty Publications

Platoon dispersion (PD) is the foundation of traffic signal coordination in an urban traffic network. PD describes the phenomenon by which vehicles depart from an upstream intersection as a platoon and begin to disperse before they arrive at the downstream intersection. Recently, advance warning flashers (AWFs) have been applied in many high-speed corridors. There is a need to update the traditional PD model to include the effect of AWFs. This paper examines the traffic flow dispersion patterns when an AWF is present and tests the hypothesis that the AWF will affect PD on a coordinated signal corridor. Platoon vehicles, which …

3d Infrastructure Condition Assessment For Rail Highway Applications, Teng Wang

Theses and Dissertations--Civil Engineering

Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intensive process of qualitative judgment. A quantifiable, objective and extensible procedure for …

A Simplified Method For Analyzing Factors Contributing To Motorcyclists’ Fatal Injuries In Ohio, Deogratias Eustace, Vamsi Krishna Indupuru

Deogratias Eustace

The aim of this paper was to analyze traffic crash data by using a simplified method in determining significant factors that increase the risk of a motorcyclist being fatally injured once involved in a motorcycle crash in Ohio. The concept of overrepresentation, which is similar to relative risk, was used in identifying significant variables associated with the elevated risk of a motorcycle crash resulting into a fatality. The overrepresentation factor (ORF) was calculated for each variable of interest. The ORF offers a simple but powerful procedure of determining whether a certain factor significantly occurs more or less frequently in one …

Crash Frequency Analysis Of Left-Side Merging And Diverging Areas On Urban Freeway Segments: A Case Study Of I-75 Through Downtown Dayton, Ohio, Deogratias Eustace, Aline Aylo, Worku Y. Mergia

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This paper analyzes the effect of left- and right-side merging and diverging areas and other variables such as light condition, roadway pavement condition, drivers’ age and presence of construction work zones on the occurrence frequency of crashes. A 6.5-mile (10.5-km) section of I-75 that passes through downtown Dayton, Ohio was considered. The area of interest has a high traffic volume and consists of different geometric design challenges including closely spaced merging and diverging ramps. A four-year record of crash data (2005–2008) and a statistical modeling technique that assumes a negative binomial distribution on generalized linear models (GLMs) were used to …

Application Of Uav In Maritime Search And Rescue Activities, Xiaojie Wang

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Lessons In On-Campus And Distance Learning Delivery Of An Introductory Naval Architecture Course, Jennifer G. Michaeli

Engineering Technology Faculty Publications

This paper describes the author’s experiences in multi-mode (face-to-face and online) delivery of an introductory-level course on the topic of Naval Architecture geared towards anaudience of engineering and engineering technology undergraduate students with no previousmaritime background. The goal of this course is to expose talented undergraduate engineering students to the marine industry and to prepare those interested in pursing a career in this field with an introductory understanding of the complex nature of designing and building ships and other marine vessels. This course was offered in Spring 2013 and Fall 2013 to a group of engineering and engineering technology students. …

Exploring Factors Contributing To Injury Severity At Freeway Merging And Diverging Locations In Ohio, Worku Y. Mergia, Deogratias Eustace, Deo Chimba, Maher Butros Qumsiyeh

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Identifying factors that affect crash injury severity and understanding how these factors affect injury severity is critical in planning and implementing highway safety improvement programs. Factors such as driver-related, traffic-related, environment-related and geometric design-related were considered when developing statistical models to predict the effects of these factors on the severity of injuries sustained from motor vehicle crashes at merging and diverging locations. Police-reported crash data at selected freeway merging and diverging areas in the state of Ohio were used for the development of the models. A generalized ordinal logit model also known as partial proportional odds model was applied to …

Project-Risk Management And Decision Analysis In Maritime Maintenance And Repair, Michael C. Plumb, C. Ariel Pinto, Rafael Landaeta, Resit Unal, Thomas Murphy

Engineering Management & Systems Engineering Faculty Publications

The purpose of this paper is to provide insights regarding the implementation of using Project Risk Management (PRM) and Decision Analysis (DA) in managing projects for complex systems such as maritime vessels. The PRM approach apprehends many forms of risk both internal and external within a given project and assists the manager in determining the level of importance of each individual project phase and component to optimize project success. Ship Maintenance and Repair project decision-making requires that risk management and risk analysis techniques be applied in order to guide management in making better decisions to meet ship service life perspective. …