Structures and Materials Commons^™

Measurements Of The Longitudinal Wave Speed In Thin Materials Using A Wideband Pvdf Transducer, Kwang Yul Kim, Wei Zou, Stephen D. Holland, Wolfgang Sachse

Stephen D. Holland

A flat transducer was constructed, using a 9-mm-thick PVDF (polyvinylidene fluoride) film for generation and detection of high-frequency ultrasonic waves, and used for measurements of the phase velocity of longitudinal waves traveling along the thickness direction in a very thin material. The transducer has a useful wideband frequency characteristic extending from 10 MHz to over 150 MHz. Measurements of the phase velocity of the longitudinal waves are carried out using a 0.212-mm-thick glass slide and a 0.102-mm-thick stainless-steel shim, using water as a coupling medium. The thickness limit for this measurement appears to be approximately 20 mm. The phase velocity …

Nonlinear Response And Fatigue Estimation Of Aerospace Curved Surface Panels To Acoustic And Thermal Loads, Adam Przekop

Mechanical & Aerospace Engineering Theses & Dissertations

This work presents a finite element modal formulation for large amplitude free vibration of arbitrary laminated composite shallow shells. The system equations of motion are formulated first in the physical structural-node degrees of freedom (DOF). Then, the system is transformed into general Duffing-type modal equations with modal amplitudes of coupled linear bending-inplane modes. The linear bending-inplane coupling is due to the shell curvature as well as unsymmetric lamination stacking. Multiple modes, inplane inertia, and the first-order transverse shear deformation for composites are considered in the formulation. A triangular shallow shell finite element is developed from an extension of the triangular …

Implementation And Testing Of Unsteady Reynolds-Averaged Navier-Stokes And Detached Eddy Simulation Using An Implicit Unstructured Multigrid Scheme, Juan A. Palaez

Mechanical & Aerospace Engineering Theses & Dissertations

Investigation and development of the Detached Eddy Simulation (DES) technique for the computation of unsteady flows on unstructured grids are presented. The motivation of the research work is driven by the ultimate goal of predicting separated flows of aerodynamic importance, such as massive stall or flows over complex non-streamlined geometries. These cases, in which large regions of massively separated flow are present, represent a challenge for conventional Unsteady Reynolds-Averaged Navier-Stokes (URANS) models, that in many cases, cannot produce solutions accurate enough and/or fast enough for industrial design and applications. A Detached Eddy Simulation model is implemented and its performance compared …

Experimental And Computational Failure Analysis Of Graphite/Bismaleimide Laminated Composite And Carbon Foam In Sandwich Construction, Troy C. Welker

Theses and Dissertations

Sandwich beams consisting of a carbon foam core and graphite/bismaleimide face sheets were constructed and tested. Nine specimens were fabricated using three distinct cross-ply symmetric face sheet layups with a constant core thickness. Four-point bend testing controlled by a constant rate of midspan vertical displacement was used to load the specimens to failure. Displacements and strains from the experiment were compared to analytical sandwich beam theory and displacements and failure loads were compared to a layerwise finite element solution. A phenomenological failure criterion was developed that compares favorably with experimental failure data. The finite element solution gives failure within an …

Structurally Integrated Antennas On A Joined-Wing Aircraft, Ben P. Smallwood

Theses and Dissertations

This research is a foundational study of conformal, load-bearing antenna arrays embedded into the wing structure of a joined-wing aircraft. It is a multidisciplinary effort that touches on the aerodynamic structural and electromagnetic design considerations that stem from this unique type of sensor integration. The antenna performance Finite Element Model (FEM) and control surface effectiveness are investigated. The theory describing an ensemble of dipole antenna elements that conform to the shape of a section of the joined wing is developed. The far held flee space radiation pattern of the sensor is then analyzed for a wing that is deflected due …

New Approaches To Gortler And Tollmien-Schlichting Boundary-Layer Instabilities, Vijay Kalburgi

Mechanical & Aerospace Engineering Theses & Dissertations

A detailed understanding of the physical processes that lead to instability and transition in the external viscous boundary layers of airfoils has been the goal of researchers for decades. This study seeks to enhance our understanding of Gortler and Tollmien-Schlichting instabilities through a critical review of prior theoretical methodology and fundamental experiments, the development of dimensionally consistent disturbance equations, and novel interpretation of the resulting flow physics revealed by their solutions to explain the process of transition.

Gortler vortices arise in boundary layers along concave surfaces due to centrifugal effects and these vortices in combination with other instabilities play an …

Numerical Study Of Two-Dimensional Secondary Injection Into A Mach 3.5 Freestream, Stephen C. Coghill

Mechanical & Aerospace Engineering Theses & Dissertations

Upstream interaction within a dual-mode scramjet engine is investigated numerically. The upstream interaction is investigated by increasing the freestream-to-injector pressure ratio. The constant area duct and sudden expansion geometries are used to achieve these results. Analysis using the symmetry boundary condition is compared to the full boundary condition for the constant area duct. Numerical analysis of the Mach 3.5 freestream is conducted using normal sonic injection of nitrogen gas to create the upstream interaction. Comparisons, where applicable, are made to experimental results. Due to the high speed of the flowfield, oblique shockwaves are present causing numerical convergence difficult to achieve. …