Aerospace Engineering Commons^™

Exploring The Concept Of A Deep Space Solar-Powered Small Spacecraft, Kian Guillaume Crowley

Master's Theses

New Horizons, Voyager 1 & 2, and Pioneer 10 & 11 are the only spacecraft to ever venture past Pluto and provide information about space at those large distances. These spacecraft were very expensive and primarily designed to study planets during gravitational assist maneuvers. They were not designed to explore space past Pluto and their study of this environment is at best a secondary mission. These spacecraft rely on radioisotope thermoelectric generators (RTGs) to provide power, an expensive yet necessary approach to generating sufficient power. With Cubesats graduating to interplanetary capabilities, such as the Mars-bound MarCO spacecraft, matching the modest …

Implementing And Testing A Novel Chaotic Cryptosystem, Samuel Jackson, Scott Kerlin, Jeremy Straub

Jeremy Straub

Cryptography in the domain of small satellites is a relatively new area of research. Compared to typical desktop computers, small satellites have limited bandwidth, processing power, and battery power. Many of the current encryption schemes were developed for desktop computers and servers, and as such may be unsuitable for small satellites. In addition, most cryptographic research in the domain of small satellites focuses on hardware solutions, which can be problematic given the limited space requirements of small satellites.

This paper investigates potential software solutions that could be used to encrypt and decrypt data on small satellites and other devices with …

An Intelligent Attitude Determination And Control System Concept For A Cubesat Class Spacecraft, Jeremy Straub

Jeremy Straub

An attitude determination and control system (ADCS) is used to orient a spacecraft for a wide variety of purposes (e.g., to keep a camera facing Earth or orient the spacecraft for propulsion system use). The proposed intelligent ADCS has several key features: first, it can be used in multiple modes, spanning from passive stabilization of two axes and unconstrained spin on a third to three-axis full active stabilization. It also includes electromagnetic components to ‘dump’ spin from the reaction wheels. Second, the ADCS utilizes an incorporated autonomous control algorithm to characterize the effect of actuation of the system components and, …

Initial Results From The First National Survey Of Student Outcomes From Small Satellite Program Participation, Jeremy Straub

Jeremy Straub

This paper presents initial results of the first national / international survey of student participants in CubeSat and other small spacecraft programs. It aims to make portions of the results of the survey available for immediate use by the CubeSat / small spacecraft community prior to the completion of a thorough analysis of the results and consideration of correlating and prospective causation factors for various outcomes.

Design And Implementation Of Satellite Software To Facilitate Future Cubesat Development, Timothy Whitney, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter project is a campus-wide effort at the University of North Dakota to design and build a low-cost CubeSat-class satellite. The intent is to create a publically- available framework that allows a spacecraft to be built with a parts cost of less than USD $5,000 (excluding mission payload-specific costs). This paper focuses on OpenOrbiter’s software system methodology and implementation.

Current work seeks to create a generalized framework that other CubeSat developers can use directly or alter to suit their mission needs. It discusses OpenOrbiter’s overall design goals with an emphasis on software design. The software architecture is divided into …

Software Design For An Intelligent Attitude Determination And Control System, Matthew Russell, Jeremy Straub

Jeremy Straub

Space exploration and satellite missions often carry equipment that must be accurately pointed towards distant targets, therefore making an effective attitude determination and control system (ADCS) a vital component of almost every spacecraft. However, the effectiveness of the ADCS could decrease drastically if components shift during launch, degrade in efficiency over the course of the mission, or simply fail. Prior work [0] has presented a concept for a adaptive ADCS which can respond to changing spacecraft conditions and environmental factors. This poster presents an implementation for a lazy learning ADCS is presented that uses past maneuver data to construct and …

Testing A Novel Cryptosystem For Use In Securing Small Satellite Communications, Samuel Jackson, Scott Kerlin, Jeremy Straub

Jeremy Straub

Cryptography in the domain of Small Satellites is a topic of growing importance. While large satellites are likely to have the hardware requirements to run common cryptographic algorithms, small satellites are extremely limited in both hardware capabilities, which limits the speed and security of cryptosystems implemented in software, and available physical space, which limits the ability to include cryptosystems implemented in hardware. However, small satellites are growing in popularity, and as such securing communications becomes a necessity for some. The Department of Defense is exploring the possibility of using CubeSats, a type of small satellite, in their operations, as are …

Improving Satellite Security Through Incremental Anomaly Detection On Large, Static Datasets, Connor Hamlet, Matthew Russell, Jeremy Straub, Scott Kerlin

Jeremy Straub

Anomaly detection is a widely used technique to detect system intrusions. Anomaly detection in Intrusion Detection and Prevent Systems (IDPS) works by establishing a baseline of normal behavior and classifying points that are at a farther distance away as outliers. The result is an “anomaly score”, or how much a point is an outlier. Recent work has been performed which has examined use of anomaly detection in data streams [1]. We propose a new incremental anomaly detection algorithm which is up to 57,000x faster than the non-incremental version while slightly sacrificing the accuracy of results. We conclude that our method …

The Openorbiter Cubesat As A System-Of-Systems (Sos), Sofiane Chaieb, Michael Wegerson, Jeremy Straub, Ronald Marsh, Benjamin Kading, David Whalen

Jeremy Straub

This paper discusses the use of the system-of-systems (SoS) methodology and SoS engineering (SoSE) to the challenge of the design and operation of a CubeSat-class spacecraft. It considers this in the context of one critical component system, the electrical power system (EPS) which interacts with virtually all other systems onboard the spacecraft. The spacecraft is also considered in the context of being a system-component of a larger mission system-of-systems. The efficacy of SoSE use for this endeavor is considered and recommendations are made for the use of SoS and SoSE by other small spacecraft and, more broadly, spacecraft developers.

Scheduling Algorithm Development For An Open Source Software And Open Hardware Spacecraft, Calvin Bina, Jeremy Straub, Ronald Marsh

Jeremy Straub

The efficacy of each type of scheduler is assessed rela-tive to the goal of having a time and resource efficient scheduling algorithm. The scheduler must ensure suc-cessful spacecraft operations and maximize the perfor-mance of tasks relative to performance constraints and their respective due dates.

Design Of An Electrical Power System For The Openorbiter Cubesat, Sofiane Chaieb, Michael Wegerson, Jeremy Straub, Ronald Marsh, David Whalen

Jeremy Straub

The OpenOrbiter Small Spacecraft Development Initiative aims to create an Open Prototype for Educational Nanosats (OPEN) framework (see [1]) for a complete 1-U CubeSat (10 cm x 10 cm x 10 cm, 1.33 kg spacecraft) with a total parts cost of less than $5,000 [2]. In order to supply all spacecraft subsystems with power, an electrical power system (EPS) has been implemented. The EPS generates power using multiple solar panels, stores it in batteries and regulates it to provide continuous levels of power to all of the subsystems of the spacecraft. The EPS has a crucial role in the spacecraft …

Cubesat Deployable Solar Panel System, Thomas Mcguire, Skye Leake, Michael Parsons, Michael Hirsch, Benjamin Kading, Jeremy Straub, David Whalen

Jeremy Straub

CubeSats are small spacecraft with a nominal size of 10 cm x 10 cm x 10 cm and a mass of 1.33 kg [1] (though some launch providers are now supporting expanded mass levels). While the CubeSat form factor has re-duced the time and cost of spacecraft development, the required resources are still beyond the grasp of many colleges and universities. The Open Prototype for Educational Nanosats (OPEN) aims to solve this problem. OPEN is an inexpen-sive modular CubeSat that can be produced with a parts budget of less than $5,000 [2]. The OpenOrbiter pro-gram is working to develop this …

A Software Defined Radio Communications System For A Small Spacecraft, Michael Hlas, Jeremy Straub, Ronald Marsh

Jeremy Straub

Software defined radios (SDRs) are poised to significantly enhance the future of small spacecraft communications. They allow signal processing to be performed on a computer by software rather than requiring dedicated hardware. The OpenOrbiter SDR (discussed in [1] and refined in [2]) takes data from the flight computer and converts it into an analog signal that is transmitted via the spacecraft antenna. Because the signal processing is done in software, the radio can be easily reconfigured. This process is done in reverse for incoming transmissions, which are received by the SDR and decoded by software. Figures 1 and 2 provide …

An Onboard Distributed Multiprocessing System For A Cubesat Spacecraft Created From Gumstix Computer-On-Module Units, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter Small Spacecraft Development Initiative at the University of North Dakota [1] aims to make ac-cess to space for research and educational purposes easier by enabling the creation of low-cost CubeSats. It is creating the Open Prototype for Educational Nanosats (OPEN), a framework for developing a 1-U CubeSat space-craft with a parts cost of less than $5,000 [2]. The designs [3], documentation and computer code from this will be made publically available to enable the development of programs at other institutions.

Considering Scheduling Algorithms For An Open Source Software Spacecraft, Calvin Bina, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter Small Satellite Development Initiative at the University of North Dakota [1] is working make space research and education more accessible world-wide [2], through the design and public release of a complete set of plans, software and other documents (see [3]) for a 1-U CubeSat. This design targets a parts cost of no more than $5,000 [4]. These lowered costs, combined with the efficiencies of the CubeSat form fac-tor [5] and free-to-qualified-developer launch services [6, 7] should facilitate greater access to space for the ed-ucational, research and other communities.

Work Done On The Operating Software For Openorbiter, Dayln Limesand, Timothy Whitney, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter Program aims to develop a tem-plate for a CubeSat spacecraft that can be used world-wide to reduce spacecraft development costs1. Unlike other approaches, which may require $50,000 in upfront hardware costs2 or $250,000 in design expenses2, an OPEN-class spacecraft can be built with a parts budget of under $5,0003. This aims to enable low-cost educa-tional missions and missions in developing regions4.

Designing An Intelligent Attitude Determination And Control System (Adcs), Michael Wegerson, Matt Partridge, Nathan Crocker, David Schindele, Broc Friend, Levi Lewis, Ben Johnson, Jeremy Straub, Ronald Marsh

Jeremy Straub

CubeSat spacecraft have been shown to provide significant cost [1], research [1] and educational benefits [2]. Prior work at UND has demonstrated the efficacy of this form factor of craft for asteroid as-sessment activities [3] and onboard image processing [4]. Work is al-so ongoing to develop a low-cost framework [5] for CubeSat devel-opment to enable activities at UND and at other locations.

Creating A Low-Cost Radio For An Open Cubesat, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

A reliable communication system is key to the success of a CubeSat mission, allowing for data to be trans-mitted to the ground station and commands to be up-loaded to the satellite. To satisfy this need, the OpenOrbiter satellite (a 1-U CubeSat [1], being devel-oped with a target parts budget of under $5,000 [2]) is leveraging previously space-tested [3], low-cost trans-ceiver design which is based on the SI 4463 IC unit. This board design will be included in the publically available Open Framework for Educational Nanosatel-lites (OPEN) allowing others to modify, enhance and/or make use of the design in the future.

Design Of A 1-U Cubesat Structure For The Open Prototype For Educational Nanosats, Benjamin Kading, Jeremy Straub, Ronald Marsh

Jeremy Straub

CubeSats are a class of small satellites that have recently gained significant interest and are being developed and used for engineering test missions, bona fide research and various other applications. A 1-U CubeSat (the orig-inal form factor) has nominal dimensions of 10 cm x 10 cm x 10 cm and a mass of no more than 1.33 kg [1](however, some integrators are now consistently allow-ing higher mass levels). Due to their small size and the demonstrated ability to successfully use consumer-grade electronics in low-Earth orbit, CubeSats cost sig-nificantly less than larger sized satellites [2]. These re-duced costs, however, are still …

The Use Of Additive Manufacturing For Cubesat Design And Testing, Jeremy Straub, Ronald Marsh, Scott Kerlin

Jeremy Straub

In developing a small spacecraft, the integration of numerous systems in a small area is a key challenge. It is easy to overlook how various component parts will integrate or have multiple sub-groups utilize un-filled space without realizing that they are creating a resource conflict. Additionally, the manufacturability of the final design is a key consideration. For all of these reasons, developing low-cost and incremental prototypes is a engineering ‘best practice’ for small spacecraft development.

Small Satellite Communication System Creation At The University Of North Dakota, Michael Hlas, Jeremy Straub, Ronald Marsh

Jeremy Straub

Software defined radios (SDRs) are poised to significantly enhance the future of small spacecraft communications. They allow signal processing to be performed on a computer by software rather than requiring dedicated hardware. The OpenOrbiter SDR (discussed in [1] and refined in [2]) takes data from the flight computer and converts it into an analog signal that is transmitted via the spacecraft antenna. Because the signal processing is done in software, the radio can be easily reconfigured. This process is done in reverse for incoming transmissions, which are received by the SDR and decoded by software. Figures 1 and 2 provide …

Mechanical Design Of A Low-Cost Deployable Solar Panel Array For A 1-U Cubesat, Thomas Mcguire, Skye Leake, Michael Parsons, Michael Hirsch, Benjamin Kading, Jeremy Straub, David Whalen

Jeremy Straub

CubeSats are small spacecraft with a nominal size of 10 cm x 10 cm x 10 cm and a mass of 1.33 kg (though some launch providers are now supporting expanded mass levels). While the CubeSat form factor has reduced the time and cost of spacecraft development, the required resources are still beyond the grasp of many colleges and universities. The Open Prototype for Educational Nanosats (OPEN) concept aims to solve this problem. OPEN is an inexpensive modular CubeSat that can be produced with a parts budget of less than $5,000. The OpenOrbiter program is working to develop this set …

Electrical Power System For An Open Hardware Cubesat, Sofiane Chaieb, Michael Wegerson, Jeremy Straub, Ronald Marsh, David Whalen

Jeremy Straub

The OpenOrbiter program is developing a complete set of CubeSat hardware and software to facilitate the development of a 1-U CubeSat (10 cm x 10 cm x 10 cm, 1.33 kg spacecraft) with a parts cost of less than $5,000. This poster covers the electrical power system (EPS) for that spacecraft. The EPS is an assemblage of components that supplies all spacecraft subsystems with power, while performing health assessment of the battery and electrical buses. The EPS has a crucial role in the spacecraft and thus has to be developed and tested with extreme care.

The EPS generates power using …

Open Prototype For Educational Nanosats Cubesat Structural Design, Benjamin Kading, Jeremy Straub, Ronald Marsh

Jeremy Straub

CubeSats are a class of small satellites that have recently gained significant interest and are being developed and used for engineering test missions, bona fide research and various other applications. A 1-U CubeSat (the original form factor) has nominal dimensions of 10 cm x 10 cm x 10 cm and a mass of no more than 1.33 kg (however, some integrators are now consistently allowing higher mass levels). Due to their small size and the demonstrated ability to successfully use consumer-grade electronics in low-Earth orbit, CubeSats cost significantly less than larger sized satellites. These reduced costs, however, are still beyond …

A Low-Cost Radio For An Open Cubesat, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter small spacecraft development program aims to develop a template that can be used by colleges and universities world-wide to ‘jumpstart’ their own CubeSat development program. It is doing this through the development of designs (and implementations to test the designs functionality) of all basic CubeSat subsystems. A CubeSat can prospectively perform elements of a mission that would otherwise have required the development and deployment of a multi-million dollar satellite, thus, interest in CubeSats in industry and government is strong as well. The Open Prototype for Educational Nanosats (OPEN) design being produced by the OpenOrbiter program may, thus, be …

The Creation Of A Communication Systems For A Small Satellite At The University Of North Dakota, Michael Hlas, Jeremy Straub, Ronald Marsh

Jeremy Straub

Software defined radios (SDRs) are poised to significantly enhance the future of small spacecraft communications. They allow signal processing to be performed on a computer by software rather than requiring dedicated hardware. The SDR takes data from the flight computer and converts it into an analog signal that is transmitted via the spacecraft antenna. Because the signal processing is done in software, the radio can be easily reconfigured.

Data is prepared for transmission by TCP stack software onboard the OpenOrbiter Spacecraft and placed in a queue while the spacecraft is listening for a signal from a ground station. When a …

Design And Development Of A Payload Area Sub-Structure For A 1-U Cubesat, Tristan Plante, Jordan Forbord, Alexander Holland, Landon Klein, Benjamin Kading, Jeremy Straub, Ronald Marsh

Jeremy Straub

Advancements in the miniaturization of electronics and other factors have allowed CubeSats, small satellites that can be created at a much lower cost than a large satellite, to perform numerous useful tasks. CubeSats, which are nominally 10 cm x 10 cm x 10 cm with a mass of less than 1.33 kg, are also developed in academic institutions to aid student learning; however, the development and launch of CubeSats can be expensive. Because of this, the Open Prototype for Educational NanoSats (OPEN) aims to make CubeSat development more affordable by developing a set of design documents as well as the …

Update On The Development Of A 1-U Cubesat At The University Of North Dakota, Jeremy Straub, Ronald Marsh

Jeremy Straub

An overview of the progress on the development of the OpenOrbiter CubeSat is presented. This covers, at a high level, the work that has been performed during the past year and foundational work that occurred prior to this. This poster also discusses future plans for the Open Prototype for Educational NanoSats (OPEN) framework and the OpenOrbiter Small Spacecraft Development Initiative. Particular focus is given to the ongoing work to prepare for an orbital launch, which the program has been down-selected for through the NASA ELaNa CubeSat Launch Initiative program.

In addition to this discussion of the program’s origins, goals and …

Design Of An Onboard Distributed Multiprocessing System For A Cubesat, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter program aims to develop a low-cost framework to facilitate the development of CubeSat-class spacecraft (small spacecraft with nominal dimensions of 10 cm x 10 cm x 10 cm) for a parts cost of less than $5,000. To validate the framework that has been developed, a prototype unit will also be fabricated and tested in low-Earth orbit. In addition to validating the development of Open Prototype for Educational Nanosats (OPEN) framework, the spacecraft will perform on-orbit science. One aspect of the science mission will be to demonstrate and characterize the efficacy of two types of image processing. To this …

Scheduling Algorithm Development For An Open Source Software Spacecraft, Calvin Bina, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter project at the University of North Dakota is working to develop a set of designs for a CubeSat class spacecraft as well as a working, modular collection of open source code that can be used by other CubeSat projects as a starting point for development. The availability of these designs and this codebase should foster accelerated development for other CubeSat projects, allowing those projects to focus their effort on their own application area, instead of reinventing the proverbial wheel. One aspect of this is to implement a task scheduler which will run on a Raspberry Pi flight computer …