Engineering Commons^™

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 17, Number 6, March 2001, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Flight Physician - March, 2001, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A seventeen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Bending Instability In Electrospinning Of Nanofibers, A. L. Yarin, S. Koombhongse, Darrell Hyson Reneker

College of Polymer Science and Polymer Engineering

A localized approximation was developed to calculate the bending electric force acting on an electrified polymer jet, which is a key element of the electrospinning process for manufacturing of nanofibers. Using this force, a far reaching analogy between the electrically driven bending instability and the aerodynamically driven instability was established. Continuous, quasi-one-dimensional, partial differential equations were derived and used to predict the growth rate of small electrically driven bending perturbations of a liquid column. A discretized form of these equations, that accounts for solvent evaporation and polymer solidification, was used to calculate the jet paths during the course of nonlinear …

Acuta Enews March 2001, Vol.30, No. 3

ACUTA Newsletters

ACUTA Resource Library Is Growing

Spotlight on Volunteers

DC Update

Kent State Wins Network World Award

Overheard on the Listserve: Who Owns the Cable?

High Tech Short Takes

Welcome New Members

Positions Available

Fuzzified Neural Network Approach For Load Forecasting Problems, D. K. Chaturvedi, P. S. Satsangi, P. K. Kalra

D. K. Chaturvedi Dr.

In load forecasting, the operator or the concerned person uses his or her experience and intuitions to obtain a good guess of the load demand. This guess is normally supported by sophisticated mathematical prediction techniques. The short term load not only varies from hour to hour, but is also influenced by the nature of events, load demand, the type of the load considered, seasonal variations, weekend day or holidays, and also by sudden demand and loss of load. Accordingly, it is quite clear that the electrical load-forecasting problem is quite difficult to model with mathematical difference or differential equations. In …

Statistical Modeling Of Sprays Using The Droplet Distribution Function, Shankar Subramaniam

Shankar Subramaniam

The theoretical foundations of a statistical spray modeling approach based on the droplet distribution function ~ddf!, which was originally proposed by Williams @Phys. Fluids 1, 541 ~1958!#, are established. The equation governing the ddf evolution is derived using an alternative approach. The unclosed terms in the ddf evolution equation are precisely defined, and the regime of applicability of current models is discussed. The theory of point processes is used to rigorously establish the existence of a disintegration of the ddf in terms of a spray intensity, which is the density of expected number of spray droplets in physical space, and …

Rough Wall Modification Of Two-Layer K-E, Paul A. Durbin, G. Medic, J.-M. Seo, J. K. Eaton, S. Song

Paul A. Durbin

A formulation is developed to apply the two-layer k-ε model to rough surfaces. The approach involves modifying the ℓv formula and the boundary condition on k. A hydrodynamic roughness length is introduced and related to the geometrical roughness through a calibration procedure. An experiment has been conducted to test the model. It provides data on flow over a ramp with and without surface roughness.

Melting And Resolidification Of A Substrate Caused By Molten Microdroplet Impact, Daniel Attinger, D. Poulikakos

Daniel Attinger

This paper describes the main features and results of a numerical investigation of molten microdroplet impact and solidification on a colder flat substrate of the same material that melts due to the energy input from the impacting molten material. The numerical model is based on the axisymmetric Lagrangian Finite-Element formulation of the Navier–Stokes, energy and material transport equations. The model accounts for a host of complex thermofluidic phenomena, exemplified by surface tension effects and heat transfer with solidification in a severely deforming domain. The dependence of the molten volume on time is determined and discussed. The influence of the thermal …

An Even More Realistic (Non-Associative) Interval Logic And Its Relation To Psychology Of Human Reasoning, I. R. Goodman, Raul Trejo, Vladik Kreinovich, Jesus Martinez, Reginaldo Gonzalez

Departmental Technical Reports (CS)

No abstract provided.

Interval Computations As A Particular Case Of A General Scheme Involving Classes Of Probability Distributions, Scott Ferson, Lev Ginzburg, Vladik Kreinovich, Harry Schulte

Departmental Technical Reports (CS)

Traditionally, in science and engineering, measurement uncertainty is characterized by a probability distribution; however, we don't know this probability distribution exactly, so we must consider classes of probability distributions. Interval computations deal with a very specific type of such classes: classes of all distributions which are located on a given interval. We show that in general, we need all convex classes of probability distributions.

Why Unary And Binary Operations In Logic: General Result Motivated By Interval-Valued Logics, Hung T. Nguyen, Vladik Kreinovich, I. R. Goodman

Departmental Technical Reports (CS)

Traditionally, in logic, only unary and binary operations are used as basic ones - e.g., "not", "and", "or" - while the only ternary (and higher order) operations are the operations which come from a combination of unary and binary ones. For the classical logic, with the binary set of truth values {0,1}, the possibility to express an arbitrary operation in terms of unary and binary ones is well known: it follows, e.g., from the well known possibility to express an arbitrary operation in DNF form. A similar representation result for [0,1]-based logic was proven in our previous paper. In this …

How To Make Sure That "~100" + 1 Is ~100 In Fuzzy Arithmetic: Solution And Its (Inevitable) Drawbacks, Vladik Kreinovich, Hung T. Nguyen, Witold Pedrycz

Departmental Technical Reports (CS)

From the commonsense viewpoint, if a person who weighs around 100 kilograms gains one more kilogram, his weight is still around 100 kilograms. Alas, not so in traditional fuzzy arithmetic. In this paper, we propose a modification of fuzzy arithmetic which does have this property. We gain the desired property, but there is no free lunch, we have to lose two important properties of the traditional fuzzy arithmetic: first, addition is no longer always associative; second, addition is no longer always easily computable.

1st Order, 2nd Order, What Next? Do We Really Need Third-Order Descriptions: A View From A Realistic (Granular) Viewpoint, Vladik Kreinovich, Hung T. Nguyen

Departmental Technical Reports (CS)

To describe experts' uncertainty in a knowledge-based system, we usually use numbers from the interval [0,1] (subjective probabilities, degrees of certainty, etc.). The most direct way to get these numbers is to ask the expert; however, the expert may not be 100\% certain what exactly number describes his uncertainty; so, we end up with a second-order uncertainty - a degree of certainty describing to what extent a given number d adequately describes the expert's uncertainty about a given statement A. At first glance, it looks like we should not stop at this second order: the expert is probably as uncertain …

In Vivo Flow Dynamics Of The Total Cavopulmonary Connection From Three-Dimensional Multislice Magnetic Resonance Imaging, Shiva Sharma, Ann E. Ensley, Katherine Hopkins, George P. Chatzimavroudis, Timothy M. Healy, Vincent K.H. Tam, Kirk R. Kanter, Ajit P. Yoganathan

Chemical & Biomedical Engineering Faculty Publications

Background. The total cavopulmonary connection (TCPC) design continues to be refined on the basis of flow analysis at the connection site. These refinements are of importance for myocardial energy conservation in the univentricular supported circulation. In vivo magnetic resonance phase contrast imaging provides semiquantitative flow visualization information. The purpose of this study was to understand the in vivo TCPC flow characteristics obtained by magnetic resonance phase contrast imaging and compare the results with our previous in vitro TCPC flow experiments in an effort to further refine TCPC surgical design.

Methods. Twelve patients with TCPC underwent sedated three-dimensional, multislice …

Examining Recent Expert Elicitation Judgment Guidelines: Value Assumptions And The Prospects For Rationality, Patricia Fleming

RISK: Health, Safety & Environment (1990-2002)

This paper was presented at the VALDOR Symposium, Stockholm, June 1999. The author examines the value assumptions in the U.S. Department of Energy and Nuclear Regulatory Commission guidance on the use of expert judgment relating to high level nuclear waste disposal site selection.

Results Of Ac Loss Tests On Twisted And Untwisted Htsc Tape Exposed To An External Field, T. Hardono, C. Cook, F. Darmann

Faculty of Engineering - Papers (Archive)

This paper presents the results of magnetic losstests on twisted and untwisted 37 multifilaments tapes exposed to an alternating field at power frequencies. The losses are measured using calorimetric methods, which are capable of measuring losses in short tapes with the accuracy of several microwatts per centimeter of tape. The losses of the tape due to the longitudinal field of the untwisted tape agree well with theoretical calculations. The measurement results on the twisted filament tape, with 50-mm twist pitch, show that the losses are slightly lower than that in the untwisted tape. This is due to the reduction of …

Dopant Structural Distortions In High-Temperature Superconductors: An Active Or A Passive Role?, Daniel Haskel, Edward A. Stern, Fatih Dogan, Arnie R. Moodenbaugh

Materials Science and Engineering Faculty Research & Creative Works

The parent compounds of high-temperature superconductors, such as YBa2Cu3O6 and La2CuO4, are strongly interacting electron systems, rendering them insulators with Mott-Hubbard gaps of a few electronvolts. Charge carriers (holes) are introduced by chemical doping, causing an insulator-metal (IM) transition and, at low temperatures, superconductivity. the role of dopants is widely seen as limited to the introduction of holes into the CuO2 planes (i.e. occupying electronic states derived from Cu and O 2px,y atomic orbitals). Most theories of high-Tc superconductivity deal with pairing interactions between these planar holes. Local distortions around dopants are poorly understood, because of the experimental difficulty in …

Network Formalism For Modeling Functionally Gradient Piezoelectric Plates And Stacks And Simulations Of Rainbow Ceramic Actuators, Robert W. Schwartz, A. Ballato, John Ballato

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A simple network representation is given for a stack of thin, homogeneous piezoelectric plates, executing a single thickness mode of motion. All plates may differ in thickness and material properties, including dielectric loss, ohmic conductivity, and viscous loss. Each plate is driven by a thickness-directed electric field, and all stack elements are connected electrically in series. Functionally gradient single plates and composites are readily modeled by the network, to a desired precision, using a sequence of circuit elements representing stepwise variations in material properties and layer thicknesses. Simulations of RAINBOW (reduced and internally biased oxide wafer) ceramics are given.

Differences In Civil Engineer Perceptions Of Change Based On Prior Training And Experience, Steven W. Lo

Theses and Dissertations

The Department of Defense (DoD) and the United States Air Force (USAF) have moved toward an aggressive stance to competitively source and privatize (CS&P) support functions as much as possible. This move is intended to shrink support costs and redirect the savings to force and equipment modernization. In addition, the USAF hopes to realize improved services, gain access to technology, share risks with contractors, and allow its forces to focus on the core competencies. In order to implement OS&P, the USAF communicates information through two major pathways, passive and active. Passive communication is similar to traditional classroom learning where information …

Editor’S Note Advancement Of Phytoremediation, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Locating Target At High Speed Using Image Decimation Decomposition Processing, Zikuan Chen, Mohammad Rezaul Karim, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

We develop a decimation-decomposition processing technique that consists of judiciously selecting certain decimation-decomposed components of an image and then performing inter-component processing. For a (k_x,k_y)-decimation decomposition, there may be up to k_xk_y decimation-decomposed components. The minimal surviving and maximal non-surviving lengths associated with inter-component processing algorithm allows for clutter suppression. By removing detection redundancies, one can locate the target at high speed. A “where-then-what” model is proposed for target tracking and recognition. It locates the target by-image decimation-decomposition processing first and then recognizes the target in question using a suitable image recognition technique.

Fatigue Response Of Thin Stiffened Aluminum Cracked Panels Repaired With Bonded Composite Patches, Jason B. Avram

Theses and Dissertations

This research investigated the fatigue response of precracked and patched 2024-T3 Aluminum panels with stiffeners. Patches were single-sided, unidirectional three ply boron/epoxy. Stiffeners were 2024-T3 aluminum and were riveted and bonded on. Disbonds were introduced into the repair bondline by inserting teflon strips. Three disbond configurations were investigated rack tip disbond (CTD) located at the edge of the patch in the path of crack propagation, full-width disbond (FWD) covering the entire crack, and end disbond (ED) located at each end of the patch and covering the full width. Each repaired panel was subjected to tension/tension cyclic fatigue with a maximum …

Influence Of Personality Type And Anonymity On Participation In A Group Support System, Robert E. Hartmann

Theses and Dissertations

A group support system (GSS) uses a combination of networked personal computers, software that collects, manipulates, and aggregates member's individual input, and human facilitation to improve the group decision-making process. A GSS has been promoted as a means of improving the quantity and quality of ideas within a decision-making meeting. Research into GSS has focused on the benefits of providing anonymity to improve participation. Anonymity in a GSS meeting has been offered as a means to improve participation, which in turn improves decision quality. To date this has not been proven through research. In fact, there is conflicting evidence as …

Routing Of Time-Sensitive Data In Mobile Ad Hoc Networks, Necdet Kilic

Theses and Dissertations

This research focuses on routing of time-sensitive data in mobile ad hoc networks. Routing protocols that were developed for ad hoc networks have been reviewed. Ad Hoc On-demand Distance Vectoring (AODV) routing protocol, which is a prominent routing protocol among these protocols have been implemented in OPNET, a discrete-event simulation tool. Taking AODV as a point of departure, a routing protocol named Real Time Routing Protocol (RTRP) has been developed and also implemented in simulation environment. The performance of these routing protocols have been observed by simulating them in various experiments where the workload has been chosen to be time-sensitive …

Minimum Distance Estimation For Time Series Analysis With Little Data, Hakan Tekin

Theses and Dissertations

Minimum distance estimate is a statistical parameter estimate technique that selects model parameters that minimize a good-of-fit statistic. Minimum distance estimation has been demonstrated better standard approaches, including maximum likelihood estimators and least squares, in estimating statistical distribution parameters with very small data sets. This research applies minimum distance estimation to the task of making time series predictions with very few historical observations. In a Monte Carlo analysis, we test a variety of distance measures and report the results based on many different criteria. Our analysis tests the robustness of the approach by testing its ability to make predictions when …

Bs News

Building Services Engineering

No abstract provided.

Determining The Value Of Groundwater Contamination Source Removal: A Methodology, Benjamin C. Recker

Theses and Dissertations

Subsurface contamination by industrial chemicals is one of the most prevalent and costly environmental problems facing the United States government. This contamination problem must be managed to protect human health and the environment. Two basic strategies are used to deal with subsurface contamination: source removal and contaminant containment. While much cost and performance data are available for individual technologies associated with each of these strategies, there have been very few studies that have examined the benefits of implementing source removal technologies in order to reduce contaminant containment (and hopefully total) costs. This study examines the tradeoff between extent of source …

A Multi-Objective Decision Support Model For The Turkish Armed Forces Personnel Assignment System, Zubeyir Cimen

Theses and Dissertations

The Turkish Armed Forces (TAF) assign more than 25,000 active duty personnel annually. TAF wants to obtain maximum utilization of its personnel by assigning the right person to the right job at the right time, To accomplish this task, decision-makers and personnel assignment staff should consider conflicting multiple objectives that create the widely known problem called "personnel assignment problem". To assist in this complicated task from a quantitative perspective, a preemptive goal programming approach was used to develop an integer programming (IP) model to capture the multiple objectives flexibly and interactively. A realistic size IP problem with random data was …

Modeling The Transient Rate Behavior Of Bandwidth Sharing As A Hybrid Control System, Kang Li, Molly H. Shor, Jonathan Walpole, Calton Pu

Computer Science Faculty Publications and Presentations

This paper uses hybrid control to model a problem of computer network systems, the dynamic behavior of bandwidth sharing among competing TCP traffic. It has been well known in the computer network community that well-behaved (TCP-friendly) congestion control mechanisms are crucial to the robustness of the Internet. Congestion control determines the transmission rate for each flow. Right now, most TCP-friendly research focuses only on the average throughput behavior without considering how the data is sent out in the short-term (e.g. bursty or smooth). However, recent experimental results show that short-term rate adjustments can change the bandwidth sharing result. Therefore, it …

Value Of Research: Spr Projects From 1995 To 1999, Donald L. Hartman

Kentucky Transportation Center Research Report

This report provides summary documentation of the 45 “SPR” research projects funded at the Kentucky Transportation Center (University of Kentucky) from 1995 through 1999. Eleven of these projects were selected for highlighting with up-to-date information regarding results and benefits. They represent a diverse range of research and demonstrate considerable breadth in the implementation of results. Abstracts for all the projects are include in the appendix. A brief discussion of the need/purpose of research, the research process, and the program areas of research at the Kentucky Transportation Center is included.