Engineering Commons^™

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

Experimental Investigation On Combustion And Emission Characteristics Of Co-Combustion Of Pulverized Biomass With Diesel Fuel In An Industrial Burner, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ahmed Abou El-Yazied Prof. Dr., Saad El-Malla Dr. Eng.

Journal of Engineering Research

This study presents the combustion and emission results obtained from a laboratory furnace equipped with a 35 kW industrial burner that utilizes co-combustion of pulverized biomass and diesel fuel. The experiment compared the co-combustion of pulverized biomass and diesel fuel with diesel fuel alone. Three different loading ratios of pulverized biomass from residual beet samples were used. Temperatures were measured at various positions inside the furnace to analyze combustion performance. It was observed that increasing the biomass loading ratios led to higher flame temperatures and improved combustion compared to diesel fuel alone. The concentrations of pollutants such as Co, HC, …

Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov

Technical science and innovation

Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …

Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova

Technical science and innovation

Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …

Optimization Of The Bio-Synthesis Of Magnesium Nanoparticles From Staphylococcus Haemolyticus: A Pilot Study, Mariam Bassam, Malak Mezher, Mahmoud Khalil

BAU Journal - Science and Technology

Nanotechnology is developing rapidly. This field has many influences in humans’ life. Nanoparticles (NPs) have many unique properties including the size, shape, morphology, and surface area. The synthesis of NPs could be achieved by three ways: physical, chemical, and biological. However, the biological synthesis of NPs has a priority on the other domains due to its safety and environmental friendship. In this regard, the main objective of this study was to synthesize magnesium (Mg) NPs from the bacterium S. haemolyticus which was isolated from the Lebanese wastewater. Different parameters were applied to detect the best conditions to produce the highest …

Results Of The Study Of The Pumpkin Drying Process, Jasur Esirgapovich Safarov, Shahnoza Abduvakhitovna Sultanova, Andrey Svyatoslavovich Ponasenko, Gani Toshkhujaevich Dadaev

Chemical Technology, Control and Management

The article presents the results of the study of the pumpkin drying process, comparisons with different drying models are carried out. A mathematical model for numerical analysis has been developed. Pumpkin drying rates are calculated and various drying models are investigated. 5 different drying models were used to verify the accuracy of experimental data and search for the most suitable model. The experimental data obtained for the drying air temperature of 45 °C, 55 °C and 65 °C were applied to various drying models.

Monitoring And Controlling Temperature Egg Incubator Prototype Based Lora Communication, Mas Aly Afandi, Fadhila Karin Purnomo, Raditya Artha Rochmanto, Sevia Indah Purnama

Elinvo (Electronics, Informatics, and Vocational Education)

Poultry industries encounter problem in produce day old chicken (DOC). Poultry industries usually produce DOC using egg incubator. Egg incubator must have high accuracy in reading environment temperature inside the machine. The temperature environment inside the egg incubator machine needs to keep in range 36°C - 40°C. On the other hand, hatcheries and chicken coop usually not in one place. Poultry industries require applied technology to solve this problem. This problem can be solved by using internet of things. But internet of things can be so expensive. This research is aim to implement monitoring and controlling temperature inside egg incubator …

Effect Of Hot Weather Concreting On The Mechanical And Durability Properties Of Concrete-A Review, Rawan Ramadan, Hassan Ghanem, Jamal Khatib, Adel Elkordi

BAU Journal - Science and Technology

Nowadays, hot weather is an essential motivator that leads concrete to lose its special characteristics. The high loss of moisture by evaporation and rapid hardening encourage the cracking potential and placement operations. The fresh mixed and hardened concrete tend to be damaged due to several conditions such as: high concrete temperature, High ambient temperature, low relative humidity, and high wind speed. These circumstances accelerate the rate of moisture loss and cement hydration. This article briefly reviews hot weather concreting problems precautions, and curing methods and also discusses the role of incorporation SCMs in reducing the temperature of concrete and enhancing …

Research On Permeability Model Of Coal Reservoir Along Producing Wellbores, Jia Lidan, Zhang Lin, Li Bobo, Wu Xuehai, Gao Zheng, Wang Zhonghui, Fu Jiale

Coal Geology & Exploration

Permeability is an important parameter to characterize gas flow. In order to ensure the safe and efficient gas drainage, it is necessary to explore the evolution characteristics of coal reservoir gas seepage at different positions from the producing wellbores. However, the effective stress, the gas adsorption/desorption capacity of coal matrix and the temperature of coal reservoir are constantly changing with the gas drainage, and even the drainage damage may occur, which makes the gas migration behavior in coal seam extremely complicated. In order to explore the seepage characteristics of coal reservoir gas during gas drainage, the space-time evolution function of …

Features Designing Special Clothing For The Hot Climate Of Uzbekistan, N Kh Mirtalipova, N A. Isaxujayeva

Technical science and innovation

This paper considers the issues of establishing the relationship between the properties of fabric, clothing design and the comfort of clothing; communication of the size of the human body, allowance for free fitting, modern design when developing the design of clothing; connection of the allowance for free fitting with a suitable air gap. A diagram is given that characterizes the dependence of the comfort of clothing on its design and properties of fabrics. A mathematical model of the processes of air exchange in the underwear space is considered, which will allow obtaining more complete information and establishing more stringent dependences …

Determination Of The Heating Time Constant For Root Crops, Z K. Ergasheva, Beraat Ozcelik

Technical science and innovation

Convective drying refers to one of the energy-intensive processes used in chemical, woodworking, food and other industries. Therefore, in modern conditions, when there is a growing shortage and an increase in energy tariffs, it is important to develop and apply new effective methods of drying wet materials in industrial production, create high-performance drying equipment, improve the operation of existing dryers, which will contribute to the rational use of natural resources, reduce the cost of finished products and increase the competitiveness of production. Root crops are plants in which nutrients are concentrated in tubers or roots. Jerusalem artichoke refers to sugar-containing …

Synthesis And Polymerization Processes Of 1-Chlorine-3- Piperidine -2-Propylmethacrylate Monomer, N U. Pulatova, O S. Maksumova, Izabela Barszczewska Rybarek

Technical science and innovation

An amino alcohol was synthesized on the basis of piperidine and epichlorohydrin. The esterification reaction of methacrylic acids with the obtained amino alcohol was studied. In order to identify optimal synthesis conditions, the influence of temperature, reaction duration and ratio of reactive reagents was investigated. The processes of obtaining unsaturated esters by esterification reactions with 1-chlorine-3-piperidine-2-propanol and acrylic-, methacrylic acids have been studied. The effect of monomer concentration on the rate of polymerization reaction and the yield of polymer formation was studied . The radical polymerization of a new monomer with a piperidine cycle in the presence of a nitrogen-containing …

Reducing The Impact Of Heavy-Weight Cars On The Deformation Of Asphalt Concrete Coatings, I.S Sodiqov, A.M Qoraboyev, F.B. Ashurov

The Scientific Journal of Vehicles and Roads

Article showcase transport is a tool influencing the carving of kolasgii shik is recommended by ishlab chikilgan. Master transport toolkit uchun minimal tsliklar ishlab chikilgan. "Superpave" tizima Republic of Uzbekistan review meteorlik stationyalarda uzakrdonidli kuzatishlar natijalaran climatimiy obrazovannyfan foidalanib, Uzbekistan erogen yulladalamisining extreme the most famous moral, in taular (PG) bulibliblib, tour now. Odinda kunning is precisely known as the pastime of Amir car kunning avatlanishiga Odinga chekllar Zhorin ethildi.

Application Of Methods Of Intermittent Ventilation Of Industrial Premises Using A Digital Data Transmission System, Yuriy Shipulin, Abdullayev Temur, Jamolidin Usmanov, Shahnoza Ergasheva

Chemical Technology, Control and Management

The article is devoted to topical applied issues, the application of methods of intermittent ventilation of industrial buildings using a digital data transmission system. The requirements for the parameters of the environment are determined, which include: composition, purity, temperature, air humidity, the content of positive and negative ions, the presence of fields of various origins (thermal, optical, biological, gas, and electromagnetic). The authors of the article argue that some of the listed parameters can be supported by ventilation and air conditioning (SCA) systems.

It is shown that when the controlled parameters are limited to a multidimensional area, the SCA control …

Improving The Accuracy Of Measuring The Volume And Mass Of Liquid Product In Horizontal Cylindrical Tanks, Nodirbek Rustambekovich Yusupbekov, Azamat Alijonovich Yusupov, Bobir Alisher Ogli Boronov

Chemical Technology, Control and Management

The article is devoted to improving the accuracy of the system for measuring and controlling the level of liquid materials in horizontal cylindrical tanks. The task of ensuring continuous accurate control of the level, volume and mass of petroleum products, taking into account the shape of the bottom of the tank, is set. In order to improve the accuracy of the measuring device, a laser rangefinder is installed, which allows you to determine the distance from the tank lid to the point of the surface level of the liquid product and calculate the volume of the liquid material by determining …

Study Of The Rheological Properties Of The Suspension Formed During The Production Of Caustic Soda By The Lime Method, Aktam Ulashovich Erkaev, Dildora Tursunova

Chemical Technology, Control and Management

The process of obtaining sodium hydroxide - caustic soda by conversion of soda ash with lime milk in the presence of natural mirabilite - has been investigated. The influence of temperature, Na₂CO₃: Na₂SO₄ ratio, concentration of lime milk and duration of the conversion process on this process was studied by identifying their optimal values. The study of the rheological properties of the reaction pulp showed that it is mobile and well filtered, which makes it possible to obtain rapidly settling large crystals of Na₂CO₃·2Na₂SO₄, Na …

Development Of Preparations Based On Local Components For Dust Suppression On Quarry Roads, Olikulov Fakhriyor, Mukhiddinov Bakhоdir, Vapoev Khusniddin, Zhurayev Shokhruh

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work is to develop dust-collecting preparations based on local raw materials for the suppression of man-made dust formed on quarry paths. For this purpose, 4 types of the drug were created in the laboratory on the basis of domestic raw materials for dust suppression. The dependence of the viscosity and density of the created preparations on the concentration of components and temperature is studied. For the preparation of the solution of the created drug, a semi-industrial installation is created, which presents the general view and the process of preparing the solution. The spray of the prepared …

Synthesis And Spectroscopic Study Of Complex Compounds Of Mn(Ii), Co(Ii), Ni(Ii), Cu(Ii) And Zn(Ii) Acetates With 2-Aminobenzimidazole, Gapurova Lobar, Kadirova Shakhnoza, Rakhmonоva Dilnoza, Olimova Manzura

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work is to develop a synthesis procedure and obtain new complex compounds of transition metal acetates with 2-aminobenzimidazole (L), to study the composition and structure of the synthesized compounds by elemental, thermal, X-ray phase analysis and IR spectroscopy. A procedure for the synthesis of new complex compounds of Mn(II), Cо(II), Ni(II), Cu(II) and Zn acetates with 2-aminobenzimidazole was developed and the composition and structure of the synthesized complex compounds were studied using modern physicochemical methods. Coordination competing donor centers, electronic and geometric structures of the ligand molecule were studied on the basis of a quantum-chemical calculation …

Research Of Focl Parameters In The Range Of Positive Temperatures, Dilmurod Davronbekov, Zafar Khakimov

Bulletin of TUIT: Management and Communication Technologies

This article studies the parameters of fiber-optic communication lines (FOCL) in the temperature range. For research, a climatic unit has been developed that allows a wide temperature range for testing (from -90°C to + 90°C) and an experimental complex for investigating the stability of optical parameters of a fiber-optic cable with temperature changes in the range from + 18°C to + 76°C. A technology of sequential switching of optical fibers of a fiber-optic cable by means of welding is proposed, thanks to which the constructive problem of placing a long optical fiber in a limited volume of a heat chamber …

Impact Of Number Of Solar Cells In Parallel/Series And Temperature On Junction Capacitance, Zhigang Zhao, Chunjie Zhang, Gao Pu, Hutang Sang, Xiaoqian Li

Journal of System Simulation

Abstract: The study to the dynamic parameters of the photovoltaic cell is of crucial importance for the design of the corresponding afterward stage controller in the photovoltaic power generation system. Beginning with the analysis to physical mechanism of the photovoltaic cell, more accurate equivalent formulation of the junction voltage and bias voltage of the photovoltaic cells /module/array was deduced, and the explicit formulation between the bias voltage and output voltage was received by using the Lambert W function based on equivalent series resistance and the saturation current. The formulation was adopted which combined the engineering mathematics model and intrinsic carrier …

Prediction Of Long-Term Physical Properties Of Low Density Polyethylene (Ldpe)Cable Insulation Materials By Artificial Neural Network Modeling Approach Underenvironmental Constraints, Ferhat Slimani, Abdallah Hedir, Mustapha Moudoud, Ali̇ Durmuş, Mounir Amir, Mohamed Megherbi

Turkish Journal of Electrical Engineering and Computer Sciences

This study quantifies long-term physical properties of low density polyethylene (LDPE) cables insulations exposed to environmental constraints such as UV radiation and temperature via both experimental measurements and mathematical modeling approach. For this purpose, tensile test and electrical breakdown test were carried out to determine elongation at break, tensile strength, and dielectric strength of unaged and aged specimens, respectively. Experimental results showed that both UV and temperature exposures affected the LDPE properties, significantly. A supervised artificial neural network (ANN) trained by the Levenberg?Marquardt algorithm was designed for predicting the long-term characteristics of specimens and also for minimizing the experimental procedures. …

Investigation Of The Moisture Binding Forms In Plant Raw Materials And Thermal Characteristics Determination, Tojiniso Raxmanova, Shaxnoza Sultanova, Jasur Safarov, Esra Capanoglu

Technical science and innovation

In this article, the forms of moisture connection and the thermal characteristics of plant materials are studied. Rosehip and hawthorn fruits were chosen as the object of research. In the heat analyzer, a decrease in the mass of the product and an increase in temperature were found when the temperature was controlled in a certain gas environment. The curves of the dependence of the dog rose and hawthorn samples on the mass and temperature are given. DTA-1/10 galvanometer sensitivity; sensitivity of the DTG-1/5 galvanometer; the maximum heating temperature is 300° С and the rate of change of the furnace heating …

Specific Features Of Optical Fiber Cable Operation During Tension And Change Of Ambient Temperature, Dilmurod Davronbekov, Zafar Khakimov

Bulletin of TUIT: Management and Communication Technologies

This article examines the effect of longitudinal and thermoelastic deformation of an optical module on the technological reserve of an optical fiber. Analytical expressions are given for determining the lower limit of the technological margin of an optical fiber for various types of fiber-optic cable section along the axis.

Uncertainty Of A Manometric Method For Determining The Humidity Of Fibrous Materials, O.Sh. Khakimov, N.Sh. Muminov, J.A. Hamidov

Chemical Technology, Control and Management

A manometric method for determining the moisture content of fibrous materials is considered. The scheme and principle of operation of the device. A formula is given for calculating the moisture content of a material. It is emphasized that the two-chamber manometric method for determining the moisture content of materials is an indirect measurement. To determine the measurement result and its uncertainty, it is necessary to justify and choose one of the appropriate methods for determining the measurement results and assess their uncertainty - the linearization method or the reduction method. The main sources of uncertainty are identified. The pairwise correlation …

Influence Of Technological Parameters On The Chemical Composition Of Calcium Polyphosphates From Phosphorites Central Kyzylkum, Ulugberdieva Ziyada, Khujamberdiev Sherzod, Mirzakulov Kholtura, Usmanov Ilkham

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research was to study the effect of temperature, the ratio of P2O5EPA:P2O5PRM and the duration of calcination on the content of various forms of P2O5 in calcium polyphosphate. The effect of calcination temperature from 150 to 300 °C, the ratio of P2O5EPA:P2O5FRM from 2,15 to 4,50 and the duration of the process from 20 to 120 minutes on the changes in various forms of P2O5 were studied. It was shown that with increasing temperature to 200-250 °C the content of the total (ortho + poly) assimilable form of Р2О5 increases and then decreases, passing through a …

Study On Creep Characteristics Of Claystone Under Thermo-Hydro- Mechanical Coupling, Wei-Zhong Chen, Fan-Fan Li, Jiang Lei, Hong-Dan Yu, Yong-Shang Ma

Rock and Soil Mechanics

As an alternative medium for the underground disposal of radioactive waste, claystone will be in the complex conditions of thermo-hydro-mechanical coupling for a long time. In order to study the long-term stability of surrounding rocks, a series of heating-cooling drainage creep tests on claystone was carried out under different confining pressures and deviatoric stresses, and the following conclusions were drawn. The rise of temperature will increase the creep rate of claystone, and extend the time of decay creep stage. But during the cooling process, the samples mainly experience shrinkage deformation without obvious creep deformation being observed. The decrease of confining …

Simulation Research On Influence Of Blood Flow On Heating During Hifu Treatment, Suqin Dai, Shengyou Qian, Yaosheng Gui, Xiao Sheng

Journal of System Simulation

Abstract: When blood vessel exists in the tumor tissue, and its boundary portion close to the vessel will be strongly influenced by the cooling effect of the blood vessel. This influence will lead to the incomplete cancer treatment. To study the influence of blood flow on heating towards the above situation, concave spherical transducer was used as the heat source, and sound intensity distribution was obtained by Rayleigh integral. Pennes equation was solved with finite difference method, then the dose distribution was calculated to determine the thermal damage degree of tissue using quantitative relationship between the heating time and temperature. …

Effects Of Period And Temperature On Quality And Shelf-Life Of Cucumber And Garden-Eggs Packaged Using Cassava Starch-Zinc Nanocomposite Film, Adeshina Fadeyibi, Zinash Delebo Osunde, Mohammed Gana Yisa

Journal of Applied Packaging Research

Nanocomposite film can be used to prolong the shelf-life of fruits and vegetables. This research was undertaken to investigate the effects of packaging period and temperature on the quality and self-lives of cucumber and garden-eggs packaged using cassava starch-zinc nanocomposite film. Hundred grams each of cucumber and garden-eggs were wrapped in a 200× 350 mm size nanocomposite film and low density polyethylene (LDPE) of 2.240± 1.076 × 10^-10 gm^-1Pa^-1s^-1 water vapor and 1.568± 0.084× 10^-10 gm^-1Pa^-1s^-1 oxygen gas permeability. The products were stored at 10−27^oC temperatures …

Study Of Temperature Profile In Drying Process, Shaxnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, Tojiniso Tursunboyevna Raxmanova

Chemical Technology, Control and Management

The article describes the simulation of the temperature field in a wide range of structural and operational parameters of the drying process. A qualitatively new representation of the temperature field profile in the chamber is revealed. As a result of the experiments, criteria were found for the unevenness of the temperature profiles on the pallets of the dispersion of the temperature of the material and the slope of the approximating line at fixed values of the average temperature of the substance. In the course of the work, an interrelation between the criteria of unevenness was revealed, which is clearly manifested …

Influence Of Technological Parameters On The Chemical Composition Of Calcium Polyphosphates From Phosphorites Central Kyzylkum, Ulugberdieva Ziyada, Khujamberdiev Sherzod, Mirzakulov Kholtura, Usmanov Ilkham

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research was to study the effect of temperature, the ratio of P2O5EPA:P2O5PRM and the duration of calcination on the content of various forms of P2O5 in calcium polyphosphate. The effect of calcination temperature from 150 to 300 °C, the ratio of P2O5EPA:P2O5FRM from 2,15 to 4,50 and the duration of the process from 20 to 120 minutes on the changes in various forms of P2O5 were studied. It was shown that with increasing temperature to 200-250 °C the content of the total (ortho + poly) assimilable form of Р2О5 increases and then decreases, passing through a …