Engineering Commons^™

Energy Efficiency In Additive Manufacturing: Condensed Review, Ismail Fidan, Vivekanand Naikwadi, Suhas Alkunte, Roshan Mishra, Khalid Tantawi

Engineering Technology Faculty Publications

Today, it is significant that the use of additive manufacturing (AM) has growing in almost every aspect of the daily life. A high number of sectors are adapting and implementing this revolutionary production technology in their domain to increase production volumes, reduce the cost of production, fabricate light weight and complex parts in a short period of time, and respond to the manufacturing needs of customers. It is clear that the AM technologies consume energy to complete the production tasks of each part. Therefore, it is imperative to know the impact of energy efficiency in order to economically and properly …

Dash And Dot Robots, Admin Stem For Success, Natalie Wilson

STEM for Success Showcase

Activity plan using robots to teach students engineering and technology

A Qualitative Look Into Repair Practices, Jumana Labib

Undergraduate Student Research Internships Conference

This research poster is based on a working research paper which moves beyond the traditional scope of repair and examines the Right to Repair movement from a smaller, more personal lens by detailing the 6 categorical impediments as dubbed by Dr. Alissa Centivany (design, law, economic/business strategy, material asymmetry, informational asymmetry, and social impediments) have continuously inhibited repair and affected repair practices, which has consequently had larger implications (environmental, economic, social, etc.) on ourselves, our objects, and our world. The poster builds upon my research from last year (see "The Right to Repair: (Re)building a better future"), this time pulling …

Mathematical Analysis Of A Hemispherical Resonator Gyroscope, Sean Mcevoy

Undergraduate Student Research Internships Conference

A Hemispherical Resonator Gyroscope (HRG) is a gyroscope that uses vibrations to measure the orientation of a device based on the Coriolis effect. A mathematical model was confirmed so that a mathematical simulation could be made and used for a simulation of the HRG in operation.

Current State And Ways Of Increasing The Efficiency Of Technologies For Isolating Water Influxes, A Karshiev, R Suleimanova, K Akhmedova, M Rakhmonkulov

Technical science and innovation

The results of the application of the technology of isolation of water inflows in the wells of the fields of the Mubarek Oil and Gas Production Department are presented. The efficiency is assessed and the problems of the applied technologies for isolation of water inflows are shown. The technical and economic efficiency of the technology for isolating water inflows in wells with collapse of the columns is shown. The flow rates of wells in the fields of the Mubarek oil and gas production department are decreasing due to an increase in the water cut of the produced product. At the …

Study Of Performance Of Vertical Drainage Well Construction From Polymer Materials, I.A. Akhmedov, Z.K. Mirkhasilova

Irrigation and Melioration

The article is devoted to the reconstruction and construction of vertical drainage wells. The use of vertical drainage wells is characterized by a decrease in the level of groundwater. The article presents data and typical regions of the use of vertical drainage wells.Also presented are mechanical, physical and chemical methods of well cleaning in practice. The information on the design and construction of vertical drainage wells is described. The analysis of corrosion resistance of vertical drainage well materials and their service life has been carried out. It is known that polymeric materials are resistant to corrosive environments. Using filters made …

Utilizing Vr For Manufacturing Learning And Training, Jetrin Wichienwidhtaya

WWU Honors College Senior Projects

This paper looks into the world of virtual reality as seen from the manufacturing point of view, specifically inside manufacturing education. Virtual reality is growing within many industries including manufacturing and is a key piece in Industry 4.0. Every year, the capabilities of virtual reality grow as the resolution of screens progresses to the point where it can simulate near-perfect depictions of reality as processing power continues to grow. This opens a massive amount of potential into things like training. Especially in the current environment where learning virtually has become the norm, being able to have hands-on experience can help …

Feasibility Of Motor-Assisted Elliptical To Improve Walking, Fitness And Balance Following Pediatric Acquired Brain Injury: A Case Series, Judith M. Burnfield, Guilherme Manna Cesar, Thad W. Buster

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose: Walking, fitness, and balance deficits are common following acquired brain injury (ABI). This study assessed feasibility, acceptability, and usefulness of a modified motor-assisted elliptical (ICARE) in addressing walking, fitness, and balance deficits in children with chronic ABIs.

Methods: Three children (> 5 years post-ABI) completed 24 ICARE exercise sessions (exercise time, speed, and time overriding motor-assistance gradually increased) to promote mass repetition of gait-like movements and challenge cardiorespiratory fitness. Parents’ and children’s perceptions of ICARE’s safety, comfort, workout, and usability were assessed. Cardiovascular response, gait and balance outcomes were assessed.

Results: No adverse events occurred. Parent’s …

Technology And Technical Device Used In The Efficient Use Of Water Resources In Irrigated Agriculture, А.U. Аtajanov

Irrigation and Melioration

The economical use of water resources, the improvement and development of new technology and technical means for its implementation, ensuring the saving of irrigation water is one of the most important issues of today. This article is devoted to the issues of improving the technology of irrigation of furrows and the creation of technical means,also recommended technology and using from created technical device in selected per experiment fields and analyzing their results.

Developing An Equivalent Solid Material Model For Bcc Lattice Cell Structures Involving Vertical And Horizontal Struts, Tahseen A. Alwattar, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

In this study, a body-centered cubic (BCC) lattice unit cell occupied inside a frame structure to create a so-called “InsideBCC” is considered. The equivalent quasi-isotropic properties required to describe the material behavior of the InsideBCC unit cell are equivalent Young’s modulus ( E e ) , equivalent shear modulus ( G e ) , and equivalent Poisson’s ratio ( ν e ) . The finite element analysis (FEA) based computational approach is used to simulate and calculate the mechanical responses of InsideBCC unit cell, which are the mechanical responses of the equivalent solid. Two separates finite element models are then …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

A Reticulation Of Skin-Applied Strain Sensors For Motion Capture, Christopher A. Schroeck

ETD Archive

The purpose of this research is to develop a system of motion capture based on skin-applied strain sensors. These elastic sensors are of interest because they can be applied to the body without restricting motion and are well suited to operate in more practical environments, such as sports fields, gymnasiums, and outdoor areas. This combination is currently not available in the field of motion capture. The current issues with strain sensor motion capture technology is the accurate is not sufficient for motion analysis and axial rotation monitoring of joints is not available. This project will build and test a sensor …

End Effector For Robotic Strawberry Picker Final Design Review, Marshall Cuffe, Cory Frederickson, Jimmy Jeffery

Mechanical Engineering

In this report, we have outlined the background of the problem and need for a solution to an automated form of strawberry harvesting. The report includes our research findings, defines the scope and objectives for this project, and documents our complete design process. Also included is our final, completed prototype, and a description of the manufacturing, design verification and testing process. Also included is our conclusions and recommendations for further improvement on future iterations.

The Vibe, Sarah P. Douglass

Capstones

The Vibe is a long-form narrative about where tech is taking the female orgasm. The piece concludes that physiological research is a required next step when creating the climax of the future.

http://sarahpdouglass.com

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

In Defense Of Science—What Would John Do?, Mohamed Gad-El-Hak

Mechanical and Nuclear Engineering Publications

Recent onslaughts on the importance of pure research to our collective well-being are trending. In this essay, I discuss the issues involved and offer a rebuttal. The thoughts are inspired by my mentor, academic sibling, and idol John Leask Lumley.

Comparative Analysis Of Locally Available Materials For Treadle Pump Seals In Senegal, West Africa, Brennan Tymrak

Dissertations, Master's Theses and Master's Reports

For rural farmers in Senegal, West Africa, pulling water for irrigation can be a laborious but necessary task during the dry season to earn income from vegetable gardening. Traditional water pulling methods are inexpensive but require great physical effort, while modern machines decrease the labor burden but at a high financial cost. This study looked at an intermediate water pulling technology, the treadle pump, and how it could be improved to become more desirable for use in agricultural irrigation. A treadle pump was built and tested during field work in a rural Senegalese village. Observations from field testing prompted a …

Modeling Social, Economic, Technical & Environmental Components In An Energy System, Ange-Lionel Toba, Mamadou Seck

Engineering Management & Systems Engineering Faculty Publications

Energy system models have become the main supporting tool for energy policy. Modern challenges in energy policy require energy systems models that integrate technical, environmental and societal aspects of the energy systems. In this paper, we introduce a conceptual model for an energy system model that specifies the relationships between social, technical, environmental, and economic aspects of an energy system. This conceptual model presented in the IDEF0 language will serve as a basis for a computational energy systems model. © 2016 The Authors.

Engineering Design: Representation And Reasoning, Clive Dym, David Brown

David C. Brown

This text demonstrates that symbolic representation, and related problem-solving methods, offer significant opportunities to clarify and articulate concepts of design to give a better framework for design research and education. This edition includes recent work on design reasoning, computational design, AI in design, and design cognition, with pointers to the current literature.

Accelerating Technology Commercializationuniversity Of Akron (Ohio) Using The Nsf I-Corps Model, Gopal Nadkarni, Elyse Ball, Daniel Hampu

Dr. Gopal Nadkarni

The paper explores the new technology commercialization model being followed at The University of Akron (UA).UA has implemented the National Science Foundation (NSF)Innovation ICorpsTMmodel since 2013. This paper describes how the NSF I-Corps model has changed the innovation culture at UA and allowed the academic faculty to explore the business potential of their intellectual property.Differences in implementation across several I-Corps Sites are explored. The lessons from UA's experience show that the I-Corps Sites program has been a resounding success and helped faculty and students to become more entrepreneurial in exploring the commercial value and demand drivers of technologies invented at …

An Experimental Investigation On A Single Tubular Sofc For Renewable Energy Based Cogeneration System

Faculty of Engineering University of Malaya

Having negative impacts on environment and the scarcity of resources of conventional fossil fuels, fuel cell technology draws more attention as an alternative for providing the electrical energy in parallel with thermal energy. In this study, a single tubular solid oxide fuel cell (SOFC) with an electrolyte of Yttria-Stabilized Zirconia 8 mol% ceramic powder was experimentally investigated. The investigation illustrated the effects of three different fuel flow-rates (175 ml/min, 250 ml/min and 325 ml/min) and two operating temperatures (650 degrees C and 750 degrees C) on the output electrical and thermal powers. The highest electrical voltage (open circuit) and overall …

Creation Of A Portable, 3d-Printable, Iphone-Compatible Spectrophotometer, Elise K. Grasse

Williams Honors College, Honors Research Projects

Spectroscopy is a widely used chemical and medical analysis tool. While spectrophotometers are commonly found in many universities and laboratories, they are not available to all high schools or laboratories in developing countries. The objective of this project was to design a high-quality, 3D-printable, iPhone-compatible spectrophotometer that uses a cell phone camera and interface to collect data. The created 3D-print file will be available to anyone with access to a 3D printer which are increasingly found in many laboratories and schools across the country. A low cost pre-printed kit will also be made for those without access to a 3D …

A Comparative Analysis Of Spatial Visualization Ability And Drafting Models For Industrial And Technology Education Students, Petros Katsioloudis, Vukica Jovanović, Mildred Jones

Engineering Technology Faculty Publications

The article presents the comparative study on the drafting models and spatial visualization ability of industrial and technology education students in the U.S. It discusses how the study was conducted which examined the issue based on technical drawings and with regards to the impacts of model types. The results reportedly revealed three-dimensional models are effective for promoting learning, however more studies have to be conducted.

Visual Literacy And The Integration Of Parametric Modeling In The Problem-Based Curriculum, Matthew Benedict Assenmacher

Master's Theses and Doctoral Dissertations

This quasi-experimental study investigated the application of visual literacy skills in the form of parametric modeling software in relation to traditional forms of sketching. The study included two groups of high school technical design students. The control and experimental groups involved in the study consisted of two randomly selected groups of students. The participants were exposed to eight weeks of technical drawing and parametric modeling instruction prior to the start of the study.

The potential applications of emerging technologies for the purpose of integrating visual literacy into the curriculum are not fully understood. Society is moving towards a more immediate …

State Of The Art / Novel Rotary-Turbo-Inflow Tech / Featured Development - Gearturbine Project - Atypical Motor Engine Type, Carlos Barrera

Carlos Barrera

GEARTURBINE PROJECT Atypical InFlow Thermodynamic Technology Proposal Submission Novel Fueled Motor Engine Type

*State of the art Innovative concept Top system Higher efficient percent. Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.

YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

-This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears …

Innovative Design: Design Of A Press System And Molds To Produce A Skateboard Deck., George William Linke

Electronic Theses and Dissertations

Skateboarding is a passion for many people. Homemade skateboard machinery has been fabricated throughout the country. While the demand for skateboards is steady; there is a steady growth in the homemade skateboard deck market. The desire to create a one of a kind deck that expresses a person's individualism is growing. This applied research and development effort - designing and fabricating a fluid powered press system and 2-part mold assembly for forming glue up laminations for skateboard decks - is an attempt to gain understanding of the different phases of the product design process.

Novel Rotary-Turbo-Inflow Tech - Gearturbine Project - Featured Development, Carlos Barrera

Carlos Barrera

GEARTURBINE PROJECT Atypical InFlow Thermodynamic Technology Proposal Submission Novel Fueled Motor Engine Type

*State of the art Innovative concept Top system Higher efficient percent. Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.

YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

-This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears …