Engineering Commons^™

Assessing Past Airworthiness Directives And How Safety Management Systems May Benefit Aviation Product Design And Manufacturing, Damon Lercel Ph.D., Manoj Patankar Ph.D., Richard Steckel Ph.D.

Journal of Aviation/Aerospace Education & Research

The European Union Aviation Safety Agency (EASA) continues to promulgate Safety Management Systems (SMS) across aviation organizations when it recently issued SMS requirements for EASA certificated Part 145 maintenance, repair and overhaul (MRO) organizations and Part 21 Design & Manufacturing (D&M) organizations. Currently, the Federal Aviation Administration (FAA) has no such rule in place for these U.S.-based organizations, which may challenge those doing business in countries where EASA policies apply. Given that a majority of the United States’ D&M and MRO population is made up of smaller organizations, it is likely a U.S. SMS regulation will require justification of the …

Evaluating Safety And Productivity Relationship In Human-Robot Collaboration, Aayush Jain, Shakra Mehak, Philip Long, John D. Kelleher, Michael Guilfoyle, Maria Chiara Leva

Conference papers

Collaborative robots can improve ergonomics on factory floors while allowing a higher level of flexibility in production. The evolution of robotics and cyber-physical systems in size and functionality has enabled new applications which were never foreseen in traditional industrial robots. However, the current human-robot collaboration (HRC) technologies are limited in reliability and safety, which are vital in risk-critical scenarios. Certainly, confusion about European safety regulations has led to situations where collaborative robots operate behind security barriers, thus negating their advantages while reducing overall application productivity. Despite recent advances, developing a safe collaborative robotic system for performing complex industrial or daily …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Analysis Of Runway Incursion Trends: Implications For Cost-Benefit Analysis Of Mitigation Investments, David C. Ison

International Journal of Aviation, Aeronautics, and Aerospace

This causal-comparative and correlation study investigated the costs of runway incursion safety improvements in relation to their effectiveness to assess potential aviation system benefits.Two airports (Los Angeles International and Dallas-Ft. Worth International), which were early adopters of Runway Status Lights (RWSL), a runway incursion technology, were targeted in this analysis. Findings indicated that there were no significant differences in counts or rates of Category A, B, and D incursions at LAX and DFW when comparing the time periods before versus after RWSL installation. Category C counts and rates were found to have increased significantly after RWSL installation. The findings of …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

Characteristics Of Helicopter Accidents Involving Male And Female Pilots, Scott S. Burgess, Robert O. Walton, P. Michael Politano

International Journal of Aviation, Aeronautics, and Aerospace

Studies examining aviation accidents have not found differences in accident rates by gender, though there may be gender differences in the types of accident. Baker, Lamb, Grabowski, and Rebok (2001) examined fixed-wing aviation accident rates of male and female private pilots and found that males were more likely to have accidents related to inattention or poor planning while female pilots were more likely to have accidents due to mishandling the aircraft. This research analyzed the National Transportation Safety Board’s aviation accident database system to examine the severity of injury and aircraft damage in rotary-wing (helicopter) accidents by gender. The data …

Transforming Yekaterinburg Into A Safe, Resilient-Smart And Sustainable City, S. A. Timashev, V. N. Alekhin, L. V. Poluyan, I. Fontanals, A. Gheorghe

Engineering Management & Systems Engineering Faculty Publications

The initiative (since 2014) project described in this paper is a product of a joint innovative research and implementation effort of the Civil Engineering and Architecture Institute, Ural Federal University, the Science and Engineering Centre "Reliability and Safety of Large Systems and Machines", Ural Branch Russian Academy of Sciences (both Yekaterinburg), Start-up OptiCits, Barcelona, Spain and the Old Dominion University, Norfolk, VA, USA. The project is based on using the MAICS convergent technology [1] to create a versatile multi-purpose tool for optimizing the science and art of risk based governance of resilience-smart and sustainable city infrastructure and communities operating in …

A Model Of Human Harm From A Falling Unmanned Aircraft: Implications For Uas Regulation, Andrew V. Shelley

International Journal of Aviation, Aeronautics, and Aerospace

This paper quantifies the human harm, in the form of fatalities and skull fractures, which could occur as a result of an unmanned aircraft falling from a height. The analysis is used to establish the maximum height at which an unmanned aircraft can be flown over people to achieve a level of safety consistent with the rate of ground fatalities from General Aviation. The maximum height is dependent on the aircraft mass and the population density of people on the ground below.

The results are used to inform a critical evaluation of recent recommendations from the FAA-chartered “Unmanned Aircraft Systems …

Safety Culture Monitoring: A Management Approach For Assessing Nuclear Safety Culture Health Performance Utilizing Multiple-Criteria Decision Analysis, James Harold Warren Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Nuclear power plants are among the most technologically complex of all energy facilities. This complexity reflects the precision needed in design, maintenance and operations to harness the energy of the atom safely, reliably and economically. Nuclear energy thus requires consistent, high levels of organizational performance by the highly skilled professionals who operate and maintain nuclear power plants (Nuclear Energy Institute [NEI], 2014, p. 1).

A key element for achieving consistent, high levels of performance in a nuclear organization is its safety culture. Nuclear safety culture is for an organization what character and personality is for an individual: a feature that …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

An Analysis Of Safety Culture & Safety Training: Comparing The Impact Of Union, Non-Union, And Right To Work Construction Venues, Harry Miller Csp, Tara Hill, Kris Mason, John S. Gaal Edd

Online Journal for Workforce Education and Development

The construction industry is one of the most dangerous sectors of the US economy. As such, the safety attitudes and climate within small (residential) contracting firms may play a role in providing a safe culture and working environment. The intent of this practitioner-based research study is to compare and determine if there is a difference in safety practices—based on documented field inspections and their related original number of violations observed by OSHA—between union residential carpentry contractors in the St. Louis area and:

1) non-union residential carpentry contractors in the St. Louis area;

2) non-union residential carpentry contractors across Missouri; and …

Co-Operation In Health And Safety: A Game Theory Analysis, Sylvie Nadeau

The University of New Hampshire Law Review

[Excerpt] “Health and safety managers face complex challenges in today’s production environments. They are confronted with increasingly flexible, autonomous and polyvalent contexts. Asymmetry of information on the workplace is widespread because various intervening parties rely on information lacking conformity. Social partners generate and use information which supports or benefits their pursuit of differing goals. Ascertaining and controlling this information can prove both difficult and costly. When addressing health and safety issues, one intervening partner alters or changes behavior in response to changes introduced by the other side. Strategic behaviors result, based on post-contract opportunism (moral hazard) and alliances with partners …

Acceptable Risk: A Conceptual Proposal, Baruch Fischhoff

RISK: Health, Safety & Environment (1990-2002)

Challenging the "de minimis risk" concept, Dr. Fischhoff argues that risks ought not to be considered apart from a particular technology's benefits. He argues, too, that the acceptability of particular kinds of risks should not be determined without considering the views of all persons who may be exposed. Finally, building upon the "reasonable person" construct, he suggests ways those goals might be achieved.

The Safety Risks Of Proposed Fuel Economy Legislation, John D. Graham

RISK: Health, Safety & Environment (1990-2002)

Based on, e.g., a comprehensive assessment of what is known of factors influencing automobile safety, previous industry responses to requirements for fuel economy and prior success of regulators in reducing injuries, Professor Graham concludes that pending fuel economy bills are apt to add 1650 fatalities and 8500 serious accidents to the annual highway toll. He also presents several short-term and long-term strategies for simultaneously saving fuel and lives.

The Role Of Scientists In Risk Assessment, Halina Szejwald Brown, Robert L. Goble

RISK: Health, Safety & Environment (1990-2002)

The authors argue that Risk assessors belong to a profession and offer an alternative to the 1983 National Research Council model defining Risk assessment. They support and illustrate their model by reexamining three familiar Risk assessments: ethylene dibromide, WASH 1400, and Ice Minus Bacteria.

Farm Safety, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Careful investigation has been made into the causes of tractors overturning.

The most common types of accident are set out below, with advice on how to avoid them.