Engineering Commons^™

Exploring Science And Engineering Practices In Children’S Picture Books, Derrick A. Nero, Kathleen Everts Danielson

Michigan Reading Journal

This article features an annotated bibliography of children’s books that illustrate engineering concepts tied to the Next Generation Science Standards (NGSS) Science and Engineering Practices for K-2 students (National Science Teaching Association -NSTA, n.d., see Appendix A) and NGSS K-2 Engineering Design performance expectations (NSTA, n.d., see Appendix B). The selected children’s books encourage discussion and model the process of inquiry and problem solving that may inspire young children to explore STEM (Science, Technology, Engineering, and Mathematics) questions of their own.

Literature Review Of Practical Insights Into The Use Of Brain Science And Learning Technology To Enhance Stem Student Learning, Keith Schimmel

Scholar Week 2016 - present

In recent years, college students, including those at Olivet Nazarene University, have experienced an increase in mental health challenges such as anxiety and depression. Researchers think technology is a significant contributor to this trend with social media undermining a viewer’s dignity through constant comparison and ruthless competition for attention. However, social media and teaching/learning technologies also have the potential to enhance efficient, effective student learning. This paper will present the best practices for use of social media and teaching/learning technologies based on a literature review in these areas.

The literature review will seek to tie together knowledge and best practices …

Balloon Boat Races, Admin Stem For Success, Natalie Wilson

STEM for Success Showcase

Students build balloon boats to learn buoyancy and practice engineering design skills.

Workforce Of The Future Begins With Aviation Stem, Lyndsay Digneo

National Training Aircraft Symposium (NTAS)

The United States has always been a world leader in aviation. This leadership position relies on the strength of the American STEM workforce and the quality of the nation’s educational, industrial, and government institutions. Therefore, it is imperative to nurture today’s students to become a well-trained STEM workforce in the future.

The Federal Aviation Administration (FAA) William J. Hughes Technical Center (WJHTC) recognizes that in pursuing its mission of aviation research, engineering, development, and test and evaluation, it is in a unique position to support aviation STEM activities for schools (K-12), post-secondary institutions, and community organizations. In 2016, the Technical …

Science, Technology, Engineering, And Mathematics (Stem) Project-Based Learning (Pbl) Education: A New Mexico Case Study For Equity And Inclusion, Kimberly A. Scheerer

Teacher Education, Educational Leadership & Policy ETDs

This research addresses how student participation in Science, Technology, Engineering, and Mathematics (STEM) project-based learning (PBL) education activities encourages underrepresented minority student achievement in STEM career field trajectories. Seven New Mexico high school counselors and 12 STEM organization personnel were interviewed during this study. Their responses represent the nuanced professional voices where New Mexico public education intersects with STEM student interest and cultural influence.

For students, STEM PBL can foster deep integration across educational disciplines and enhance STEM career trajectory interest and readiness. STEM education converged with PBL methodologies has the ability to leverage community support while broadening student networks. …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Steam Explores Project Based Assessments, Erica Luvone, Loretta Radulic, Joe Mondanaro, Nicole Acevedo, Erika Dent, Ann Rhodes

STEM Month

This year, our approach to STEAM explores project based assessments in the disciplines of science and social studies. Students work in groups to produce projects that showcase work and proficiency. These projects are presented, displayed, discussed, and revisited or revised at student discretion.

Students Interest And Thoughts On Stem, Chrisitine Girtain

STEM Month

I am Juan Sebastian Bohorquez Mora, I am a sophomore student at Toms River High School North. I am interested in biofuels because I believe they are a good option to replace fossil fuels. I am also interested in duckweed because biofuels are made out of crops, and people need to eat those crops. That’s when duckweed comes in and it can be used as a feedstock for ethanol production which is a biofuel. Bioethanol is a type of biofuel and it is derived from the corn’s starch. Instead of making ethanol from the corn’s starch, we can use duckweed …

Learning's In Stem, Victoria Arms

STEM Month

Can you share something you have learned related to a STEM topic you feel is important?

Answer: A stem topic I feel is important is math because you can learn many equation’s.

Can you explain why that topic is important to you, their families and communities? Answer: The topic that is important to our families and community is important because you can grow smarter and can learn a lot of things.

Mrs.Arms class.

4-H Engineering Design Challenge Program: Engaging Youth In Stem Learning, R.Michael Compton, Rebecca L. Meyer, Anne Stevenson, Somongkol Teng

The Journal of Extension

The University of Minnesota 4-H Engineering Design Challenge program is an experiential learning opportunity in which youth work with adult volunteers to create Rube Goldberg influenced machines to address real-world issues. The program components are designed to help youth develop STEM work skills using an Engineering Design Process, increase interest in STEM content knowledge, and explore STEM career interests/aspirations. Evaluation indicates a majority of participants learn the engineering design process, principles of mechanical engineering, teamwork, public speaking, and problem solving. Programmatic outcomes and supports provide for the successful replication, adaptation, and implementation in both formal and non-formal learning environments.

Making Makers: Tracing Stem Identity In Rural Communities, Jessie Nixon, Andy Stoiber, Erica Halverson, Michael Dando

Journal of Pre-College Engineering Education Research (J-PEER)

In this article, we describe efforts to reduce barriers of entry to pre-college engineering in a rural community by training local teens to become maker-mentors and staff a mobile makerspace in their community. We bring a communities of practice frame to our inquiry, focusing on inbound and peripheral learning and identity trajectories as a mechanism for representing the maker-mentor experience. Through a longitudinal case study, we traced the individual trajectories of five maker-mentors over two years. We found a collection of interrelated factors present in those students who maintained inbound trajectories and those who remained on the periphery. Our research …

Seventh-Grade Students' Use Of Heat Transfer Conceptions During An Engineering Design-Based Stem Integration Curriculum, Emilie A. Siverling, Tamara J. Moore

Integrated Engineering Department Publications

As the integration of STEM becomes increasingly important in pre-college education, it is important to study models of STEM integration. One model, engineering design-based STEM integration, has shown promising results in terms of student science content learning. This study’s purpose was to explore one student team’s use of heat transfer conceptions as they participated in an engineering design-based STEM integration curriculum. A case study research design, along with procedures from qualitative content analysis, were used to identify scientific and alternative conceptions that the seventh-grade students communicated during the unit. The main result is that the students spoke and wrote about …

Do After-School Robotics Programs Expand The Pipeline Into Stem Majors In College?, Cathy Burack, Alan Melchior, Matthew Hoover

Journal of Pre-College Engineering Education Research (J-PEER)

One result of the growing concerns over the numbers of young people moving into science, technology, engineering and mathematics (STEM)-related careers has been the expansion of formal and informal STEM education programming for pre-college youth, from elementary school through high school. While the number of programs has grown rapidly, there is little research on their long-term impacts on participant education and career trajectories. This paper presents interim findings from a multi-year longitudinal study of three national after-school robotics programs that engage students in designing, building, and competing complex robots with the goal of inspiring long-term interest in STEM. Focusing on …

Elementary School Student Development Of Stem Attitudes And Perceived Learning In A Stem Integrated Robotics Curriculum, Yu-Hui Ching, Dazhi Yang, Sasha Wang, Youngkyun Baek, Steve Swanson, Bhaskar Chittoori

Educational Technology Faculty Publications and Presentations

Robotics has been advocated as an emerging approach to engaging K-12 students in learning science, technology, engineering, and mathematics (STEM). This study examined the impacts of a project-based STEM integrated robotics curriculum on elementary school students’ attitudes toward STEM and perceived learning in an afterschool setting. Three elementary school teachers and 18 fourth to sixth graders participated in an eight-week-long program. Quantitative and qualitative data were collected and analyzed, and showed students’ attitudes toward math improved significantly at the end of the robotics curriculum. Three specific areas of learning were identified, including STEM content learning and connection, engagement and perseverance, …

Slime Bash Social: A Tactile Manipulative For Child And Youth Play, Joyce A. Levingston, Marie E. Adebiyi, Brian Hadley, Younis Al-Hassan, Dongyub Back, Michelle Cook, Christopher R. Edginton

Journal of STEM Arts, Crafts, and Constructions

The play product of slime has gained increasing popularity amongst children and youth throughout the United States. Slime can be thought of as a tactile manipulative that can be shaped, stretched, expanded, lumped together, twisted, squeezed, squashed, folded, rolled, shredded, twirled, swirled, pounded, and cut or pulled apart. As a learning tool, slime can and does support STEM initiatives and programs. Slime can be created using simple ingredients that are easily measured, combined, and prepared by children and youth. In addition, slime can incorporate components such as glitter, beads, shaving cream, color dyes and other items. This paper offers an …

Law School News: Roger Williams University Announces 11th President 02-13-2019, Ed Fitzpatrick

Life of the Law School (1993- )

No abstract provided.

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

Making Connections: Evaluation Of A Professional Development Program For Teachers Focused On Stem Integration, Judy Lambert, Carmen Cioc, Sorin Cioc, Dawn Sandt

Journal of STEM Teacher Education

This article reports on a 2-year evaluation of a STEM integration professional development (PD) program for 40 math, science, and special education teachers in Grades 5–9 from a large Midwestern public school district. The National Research Council’s framework for integrated STEM education (Honey, Pearson, & Schweingruber, 2014) was used to explain the goals, outcomes, nature and scope, and implementation of the program. Teachers were measured on their growth in STEM content knowledge, technology integration, teaching confidence, pedagogical beliefs, and impact of PD. Increases resulted in all these areas with statistically significant improvements in most of them, particularly in Year 2. …

Motivational Decline And Recovery In Higher Education Stem Courses, Anna M. Young, Paul J. Wendel, Joan M. Esson, Kathryn M. Plank

Education Faculty Scholarship & Creative Works

Decline in student motivation is a concern for STEM education, especially for underrepresented groups in the sciences. Using the Science Motivation Questionnaire II, 41 foundational STEM courses were surveyed at the beginning and end of each semester in an academic year at a small primarily undergraduate university. Significant pre- to post-semester declines were observed in each of five measured motivational factors (Intrinsic motivation, Career motivation, Self determination, Self-efficacy, and Grade motivation), with effect sizes ranging from 0.21 to 0.41. However, in the second semester pre-survey, four motivational factors rebounded, including three returning to initial levels, suggesting that the observed motivational …

Anatomy Of Stem Teaching In North American Universities, Paul J. Wendel, Joan M. Esson, Kathryn M. Plank, Anna M. Young

Education Faculty Scholarship & Creative Works

A large body of evidence demonstrates that strategies that promote student interactions and cognitively engage students with content lead to gains in learning and attitudinal outcomes for students in science, technology, engineering, and mathematics (STEM) courses. Many educational and governmental bodies have called for and supported adoption of these student centered strategies throughout the undergraduate STEM curriculum.

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

Gender Effects Of Robotics Programs On Stem-Related Self-Efficacy Of High School Students, Sandra Hall-Lay

Walden Dissertations and Doctoral Studies

Lack of STEM-related self-efficacy has impeded the growth of women in STEM fields. Out of school (OST) robotics programs and other STEM-related OST programs provide secondary students with opportunities to work in groups, brainstorm, and formulate ideas that require communication and teamwork. The purpose of this quantitative, quasi-experimental study was to compare STEM-related self-efficacy scores among male and female students who participated in OST robotics programs or other OST STEM-related programming. Independent variables were type of OST STEM program and gender. The dependent variable was students' STEM-related self-efficacy as measured by the Coping Self-Efficacy Scale. Responses from 149 students in …

Virginia Technology And Engineering Education Association 1978-2018: Celebrating Six Decades Of Progress, Ron Vickers, Philip A. Reed, George R. Willcox

STEMPS Faculty Publications

(First Paragraph) Technology and engineering education in Virginia and the nation is coming to a crossroads. Recent growth in state directives, new courses, and ever-changing funding for science, technology, engineering, and mathematics (STEM) education influences the supply of Technology Education teachers, leading to what some say is a dire future for our profession and association. This history is gathered to emphasize the importance and value of what we teach in Virginia public schools. It also captures who was involved with the association leadership over the years.

Approaches To Integrating Engineering In Stem Units And Student Achievement Gains, Elizabeth A. Crotty, Selcen S. Guzey, Gillian H. Roehrig, Aran W. Glancy, Elizabeth A. Ring-Whalen, Tamara J. Moore

Journal of Pre-College Engineering Education Research (J-PEER)

This study examined different approaches to integrating engineering practices in science, technology, engineering, and mathematics (STEM) curriculum units. These various approaches were correlated with student outcomes on engineering assessment items. There are numerous reform documents in the USA and around the world that emphasize the need to incorporate engineering into science education. The authors of this study contend that different approaches to integrating engineering in STEM units correlate to larger student achievement gains in engineering, based on assessment items developed from the Framework for Quality K–12 Engineering Education (Moore, Glancy, Tank, Kersten, & Smith, 2014). The goal of this work …

The Engineering Admissions Partnership Program: A Navigation Strategy For Community College Students Seeking A Pathway Into Engineering, Marcia R. Laugerman, Mack C. Shelley, Steven K. Mickelson, Diane T. Rover

Diane Rover

This paper presents the evaluation of a program designed to improve transfer outcomes for community college students pursuing an engineering degree. The program, the Engineering Admissions Partnership Program (E-APP), was designed to improve the navigational success of community college transfer students through connections to the university. These connections include coordinated academic advising, peer-mentoring, campus visits, and online social and professional networks. The objective of the study is to determine the efficacy of the E-APP and its interventions, which will be measured by increased participation rates and increased university retention rates for E-APP participants. Outcome data for the students are analyzed …

Impacts Of Professional Development In Integrated Stem Education On Teacher Self-Efficacy, Outcome Expectancy, And Stem Career Awareness, John Geoffrey Knowles

Purdue Polytechnic Doctoral Dissertations

This research analyzed the effects of teacher professional development and lesson implementation in integrated Science, Technology, Engineering, and Math (STEM) on: 1.) Teacher self-efficacy and their confidence to teach specific STEM subjects; 2.) Teaching outcome expectancy beliefs concerning the impact of actions by teachers on student learning; and 3.) Teacher awareness of STEM careers. High school science and technology education teachers participating in the Teachers and Researchers Advancing Integrated Lessons in STEM (TRAILS) project experimental group attended a ten-day summer professional development institute designed to educate teachers in using an integrated STEM education model to implement integrated STEM lessons. The …

Students Explore Fossil Creatures Of The Cambrian Period Burgess Shale Through Model-Making, Andrea Anderson, Ksenia Zhbanova, Phyllis Gray, Jolene K. Teske, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This practical article features an arts-integrated science unit on fossils of the Burgess Shale for fourteen elementary/ middle school students at a weeklong summer day camp. The day camp had a theme of recycling, reduction and reuse; all of the fossil models had substantial recycled components to support this theme. Next Generation Science Standards were supported by the course activities in which students examined fossil specimens, images, and comparative modern relatives to determine the anatomy and lifestyles of Burgess Shale Cambrian Period fossil animals (e.g., Olenoides trilobites, Anomalocaris, Canadaspis, Opabinia, Wiwaxia, Hallucigenia) through making scientific …

Ecosystem Food Web Lift-The-Flap Pages, Dana L. Atwood-Blaine, Audrey C. Rule, Hannah Morgan

Journal of STEM Arts, Crafts, and Constructions

In the lesson on which this practical article is based, third grade students constructed a “lift-the-flap” page to explore food webs on the prairie. The moveable papercraft focused student attention on prairie animals’ external structures and how the inferred functions of those structures could support further inferences about the animals’ diets. In general, most students made simple causal connections between an animal’s observable characteristics and the food it would probably eat. Some students were also able to make multi-agent connections to develop a more complex mental model of a food web. Ultimately, the lift-the flap project was engaging to students …