Engineering Commons^™

Community College Engineering Degree Partnerships With 4-Year Universities, Jeffrey Mark Stear

Electronic Theses and Dissertations

Increasing the number of STEM professionals and reducing inequities in STEM are national priorities. Community colleges are important to address these concerns because they represent a higher percentage of underrepresented minority (URM) and women students. However, students starting 4-year STEM degrees in community college have had a lower completion rate. Partnerships between community colleges and 4-year universities have the potential to improve success for community college students, but more research is necessary. The purpose of this ex post facto, quantitative, correlational study was to determine the relationships among participation in different types of partnerships between community colleges and 4-year universities, …

Infographic: Girls’ Interest In Engineering, Dominique Russell

Teacher infographics

It's well-known that women are underrepresented in participation in STEM education and the STEM workforce. The 2021 Youth in STEM study surveyed participants about their awareness and perception of STEM subjects and careers. As this infographic shows, the findings reveal age is important for girls when it comes to interest in studying engineering.

Exploring Science And Engineering Practices In Children’S Picture Books, Derrick A. Nero, Kathleen Everts Danielson

Michigan Reading Journal

This article features an annotated bibliography of children’s books that illustrate engineering concepts tied to the Next Generation Science Standards (NGSS) Science and Engineering Practices for K-2 students (National Science Teaching Association -NSTA, n.d., see Appendix A) and NGSS K-2 Engineering Design performance expectations (NSTA, n.d., see Appendix B). The selected children’s books encourage discussion and model the process of inquiry and problem solving that may inspire young children to explore STEM (Science, Technology, Engineering, and Mathematics) questions of their own.

Comparing Polytechnic And Liberal Arts Institutions: Leaks In The System, Ryan Drew Baldwin

Seton Hall University Dissertations and Theses (ETDs)

The United States has long been a pioneer in higher education, yet the last few decades have proven challenging in maintaining its lead in the science, technology, engineering, and mathematics fields (STEM). Students entering postsecondary education and participating in a STEM degree face increased academic rigor and this study’s goal is to better understand factors that influence their retention. There are many psychosocial, environmental, and academic variables that may impact a student’s retention and this study aims to investigate how those variables inform a students likelihood of being retained and if there are meaningful differences between polytechnic and non-polytechnic institutions.

Literature Review Of Practical Insights Into The Use Of Brain Science And Learning Technology To Enhance Stem Student Learning, Keith Schimmel

Scholar Week 2016 - present

In recent years, college students, including those at Olivet Nazarene University, have experienced an increase in mental health challenges such as anxiety and depression. Researchers think technology is a significant contributor to this trend with social media undermining a viewer’s dignity through constant comparison and ruthless competition for attention. However, social media and teaching/learning technologies also have the potential to enhance efficient, effective student learning. This paper will present the best practices for use of social media and teaching/learning technologies based on a literature review in these areas.

The literature review will seek to tie together knowledge and best practices …

Science Club, Danielle Gibson, Krista Andersen

Honors Expanded Learning Clubs

Honors After School program for elementary age children to engage with scientific principles. Students performed hands-on experiments to explore various STEM fields. Each weekly lesson consisted of a different concept to be learned or explored by early elementary aged students.

Balloon Boat Races, Admin Stem For Success, Natalie Wilson

STEM for Success Showcase

Students build balloon boats to learn buoyancy and practice engineering design skills.

Workforce Of The Future Begins With Aviation Stem, Lyndsay Digneo

National Training Aircraft Symposium (NTAS)

The United States has always been a world leader in aviation. This leadership position relies on the strength of the American STEM workforce and the quality of the nation’s educational, industrial, and government institutions. Therefore, it is imperative to nurture today’s students to become a well-trained STEM workforce in the future.

The Federal Aviation Administration (FAA) William J. Hughes Technical Center (WJHTC) recognizes that in pursuing its mission of aviation research, engineering, development, and test and evaluation, it is in a unique position to support aviation STEM activities for schools (K-12), post-secondary institutions, and community organizations. In 2016, the Technical …

4-H Summer Of Stem: A Practical Approach To Increasing Workforce Readiness, Vernelle Mitchell-Hawkins, Jessica Mellon

The Journal of Extension

4-H Summer of STEM is a workforce readiness program for high school youth. The goals of the program are to increase students’ interest in STEM careers, improve college and workforce readiness, and connect youth to businesses and industries in the local community. Selected youth receive hands-on development of workforce readiness skills, are paired with a STEM mentor for job shadowing, and participate in college campus visits. Preliminary findings show that participants reported having a positive relationship between participation in 4-H youth development programs and career skills. This article introduces the 4-H Summer of STEM and offers suggestions for implementation.

Science, Technology, Engineering, And Mathematics (Stem) Project-Based Learning (Pbl) Education: A New Mexico Case Study For Equity And Inclusion, Kimberly A. Scheerer

Teacher Education, Educational Leadership & Policy ETDs

This research addresses how student participation in Science, Technology, Engineering, and Mathematics (STEM) project-based learning (PBL) education activities encourages underrepresented minority student achievement in STEM career field trajectories. Seven New Mexico high school counselors and 12 STEM organization personnel were interviewed during this study. Their responses represent the nuanced professional voices where New Mexico public education intersects with STEM student interest and cultural influence.

For students, STEM PBL can foster deep integration across educational disciplines and enhance STEM career trajectory interest and readiness. STEM education converged with PBL methodologies has the ability to leverage community support while broadening student networks. …

Girls In Stem! Elementary Afterschool Six-Week Curriculum, Jess Li, Samavi Rafique

Honors Expanded Learning Clubs

No abstract provided.

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Create Research Symposium 2022 Book Of Abstracts, Ursa Benedicic, Brian Bowe Prof, Michael Carr Dr, Shannon Chance, Steen Hyldgaard Christensen, Eddie Conlon, Sandra Cruz, Gavin Duffy Dr, Fiona Faulkner Dr, Stella Malkogeorgou, John Mchugh, Mike Murphy Prof, Colm O'Kane Dr, Jye Benjamin O Sullivan, Marianna Pagkratidou Dr, Sheryl Sorby, Marten Westerhof

Other

This is the book of Abstracts for a recent symposium held by the CREATE research Group in TU Dublin.

Steam Explores Project Based Assessments, Erica Luvone, Loretta Radulic, Joe Mondanaro, Nicole Acevedo, Erika Dent, Ann Rhodes

STEM Month

This year, our approach to STEAM explores project based assessments in the disciplines of science and social studies. Students work in groups to produce projects that showcase work and proficiency. These projects are presented, displayed, discussed, and revisited or revised at student discretion.

Steam Report By Siri Ojamaa, Jacqueline Docampo

STEM Month

My name is Siri Ojamaa I am in 5th grade at Theadore Roosevelt school. I live in Weehawken, NJ. I really love Steam and I wanted to tell you about my experience with Steam

Steam Report By Summer Diaz, Summer Diaz

STEM Month

Hi, my name is Summer Diaz. I am 10 years old and a student at Theodore Roosevelt School (TRS) in Weehawken. I am here to talk to you about my process through STEAM. STEAM is a very important and difficult task to do because I have done many projects involving STEAM like my Umbrella Holder that I made when I was 8 in 3rd grade. Which prevents having so much groceries in your hand when it’s raining so you only have to hold one thing. Then my most recent project is Finder which prevents you from losing your lost devices.

3 Stem Projects By Fares Soliman, Fares Soliman

STEM Month

My name is Fares Soliman. I am a fourth grade student from John Hill School Boonton NJ. I created a 3 STEM project. The first project that I made was a doll. I used pink yarn for the dress and brown yarn for the hair. I also used a round wooden ball for the face. The second project that I created was a diorama of a farm. I put some grass, trees, a barn, hay sticks, some animals, a bridge, a fence, some plastic food and corn for the crop. My third project was a diorama of a park. It …

Students Interest And Thoughts On Stem, Chrisitine Girtain

STEM Month

I am Juan Sebastian Bohorquez Mora, I am a sophomore student at Toms River High School North. I am interested in biofuels because I believe they are a good option to replace fossil fuels. I am also interested in duckweed because biofuels are made out of crops, and people need to eat those crops. That’s when duckweed comes in and it can be used as a feedstock for ethanol production which is a biofuel. Bioethanol is a type of biofuel and it is derived from the corn’s starch. Instead of making ethanol from the corn’s starch, we can use duckweed …

Learning's In Stem, Victoria Arms

STEM Month

Can you share something you have learned related to a STEM topic you feel is important?

Answer: A stem topic I feel is important is math because you can learn many equation’s.

Can you explain why that topic is important to you, their families and communities? Answer: The topic that is important to our families and community is important because you can grow smarter and can learn a lot of things.

Mrs.Arms class.

School's Approach To Science, Technology, Engineering, And Math (Stem), Alissa Schonmann, Mark Maire, C. Lionbailey, A. Kramar, Lindsay Vieira

STEM Month

We have a huge emphasis on STEAM in our school district. Our curriculum focuses on student-led hands-on challenges. Students are given problems to solve and they use the Engineering Design Process to come up with creative solutions. Although we like the solutions that students come up with, we emphasize the journey through the entire process. Students understand that even though they have a solution, they can still reflect on how they could improve their work further. We are fortunate enough to have an abundance of technologies in our beautiful STEAM Lab. The STEAM Lab is equipped with VR stations, 3D …

A Qualitative Single-Case Exploring The Impact Of A Mentor And Cohort On Students’ Academic And Career Decisions., Kevin Adkins, Samantha Bowyer, Jorge L. D. Albelo Ph.D.

Publications

Exposure to research is known to play a positive role in undergraduate education. However, robust research responsibilities are oftentimes not formally incorporated into a student’s academic experience until master level studies. Further, a variety of intimidation factors often inhibit many undergraduate students from participating on a research team. In this case study, the research team evaluated a unique group of undergraduate researchers who matriculated to the same university after beginning to participate in research as concurrently enrolled students. Following matriculation, each student continued to participate in research throughout the entirety of their undergraduate studies. All of the study’s students were …

The Effects Of Stem And Non-Stem Mathematics Corequisite Courses On Student Success At Public Institutions In West Virginia, Vanessa S. Keadle

Theses, Dissertations and Capstones

This study explored the differences in student success outcomes between students enrolled in non-STEM and STEM corequisite mathematics courses at 18 postsecondary institutions across five academic years in West Virginia, using de-identified student data. The researcher analyzed this extant data to determine if student characteristics were predictors of success, as defined as passing the mathematics corequisite course, retention to the next semester, and earning a GPA of 2.0 or higher. The researcher also conducted analyses to understand if the differences in those outcomes between STEM and non-STEM courses were significant. This study identified statistically significant gaps in success for students …

Fundamental Factors For Success: Engineering Faculty And Industry Partners, Molly F. Schaefer

All Graduate Theses, Dissertations, and Other Capstone Projects

Partnerships and collaborations between higher education and industry have a long history in the United States. Numerous partnerships have contributed to advancements in the economy, education and training, humanity, and innovation. The subject areas of science, engineering, and technology are fields in which many of the collaborations occur, and many of the partnerships are often initiated and led by a faculty and a member of industry. Yet, it remains unclear how academia and industry achieve successful partnerships when the goals, language, culture, and organizational structures significantly differ from one organization to another. This study examined whether partnerships among engineering faculty …

Stem For All Showcase Report, Bruce G. Bukiet, James M. Lipuma

STEM Month

This article and the associated STEM for all showcase submission video (https://www.youtube.com/watch?v=Clps427rdDc) was presented at the NSF 2021 STEM FOR ALL COVID, Equity & Social Justice Conference, May 11-18.

This article provides a description of the development of the STEM in your Home project in the STEM for Success initiative.

4-H Engineering Design Challenge Program: Engaging Youth In Stem Learning, R.Michael Compton, Rebecca L. Meyer, Anne Stevenson, Somongkol Teng

The Journal of Extension

The University of Minnesota 4-H Engineering Design Challenge program is an experiential learning opportunity in which youth work with adult volunteers to create Rube Goldberg influenced machines to address real-world issues. The program components are designed to help youth develop STEM work skills using an Engineering Design Process, increase interest in STEM content knowledge, and explore STEM career interests/aspirations. Evaluation indicates a majority of participants learn the engineering design process, principles of mechanical engineering, teamwork, public speaking, and problem solving. Programmatic outcomes and supports provide for the successful replication, adaptation, and implementation in both formal and non-formal learning environments.

Making Makers: Tracing Stem Identity In Rural Communities, Jessie Nixon, Andy Stoiber, Erica Halverson, Michael Dando

Journal of Pre-College Engineering Education Research (J-PEER)

In this article, we describe efforts to reduce barriers of entry to pre-college engineering in a rural community by training local teens to become maker-mentors and staff a mobile makerspace in their community. We bring a communities of practice frame to our inquiry, focusing on inbound and peripheral learning and identity trajectories as a mechanism for representing the maker-mentor experience. Through a longitudinal case study, we traced the individual trajectories of five maker-mentors over two years. We found a collection of interrelated factors present in those students who maintained inbound trajectories and those who remained on the periphery. Our research …

Simplification Of Robotics Through Autonomous Navigation, Grant Turner

Mahurin Honors College Capstone Experience/Thesis Projects

With self-driving vehicles, college campus food delivery, or even automated home vacuuming systems, robotics is undoubtedly becoming more prevalent in everyday society and it can be expected to continue with time. While many people are owners, users, or even just spectators of theses robotic products or services, there seems to be a negative perception of robotics that poses an intimidation factor regarding the attempt to understand the ideas driving technology. This perception tends to view robotics as machines that require rich education to understand the complexity and interworkings of, thus attempts understand the field are neglected.

To combat this line …

The Fresno State Transportation Challenge, Christian Wandeler, Steven Hart

Mineta Transportation Institute Publications

The goal of the “Fresno State Transportation Challenge” was outreach to schools and community engagement, to provide K-8 students opportunities to learn about transportation and transportation-related careers, and to practice 21st century skills by solving a transportation-related issue in their community. Through the pedagogical frameworks of action civics and eduScrum (a method to facilitate self-managed teamwork with a visual board), teachers and students worked on solving issues in their community. They learned design thinking to identify issues and develop solutions while using eduScrum to manage their work. University students from transportation engineering visited the schools regularly to support the K-8 …

Seventh-Grade Students' Use Of Heat Transfer Conceptions During An Engineering Design-Based Stem Integration Curriculum, Emilie A. Siverling, Tamara J. Moore

Integrated Engineering Department Publications

As the integration of STEM becomes increasingly important in pre-college education, it is important to study models of STEM integration. One model, engineering design-based STEM integration, has shown promising results in terms of student science content learning. This study’s purpose was to explore one student team’s use of heat transfer conceptions as they participated in an engineering design-based STEM integration curriculum. A case study research design, along with procedures from qualitative content analysis, were used to identify scientific and alternative conceptions that the seventh-grade students communicated during the unit. The main result is that the students spoke and wrote about …