Engineering Commons^™

Developing A Smart And Sustainable Public Transportation System: A Case Study In Camden, New Jersey, Zahra Vafakhah

Theses and Dissertations

The transportation sector is a major contributor to air pollution and Greenhouse Gas (GHG) emissions. As a significant source of emissions, public transportation presents an opportunity for mitigation through electrification. However, transitioning to an electric bus fleet necessitates substantial investments in bus procurement and charging infrastructure. To address the associated costs, this study introduces a mixed-integer linear mathematical model developed to optimize the location of on-route fast charging stations within bus networks. The central objective of this optimization formulation is to minimize the overall cost of establishing the charging infrastructure. The study employs a real-world case study focusing on a …

Improving Mobility And Safety In Traditional And Intelligent Transportation Systems Using Computational And Mathematical Modeling, Shahrbanoo Rezaei

Doctoral Dissertations

In traditional transportation systems, park-and-ride (P&R) facilities have been introduced to mitigate the congestion problems and improve mobility. This study in the second chapter, develops a framework that integrates a demand model and an optimization model to study the optimal placement of P&R facilities. The results suggest that the optimal placement of P&R facilities has the potential to improve network performance, and reduce emission and vehicle kilometer traveled. In intelligent transportation systems, autonomous vehicles are expected to bring smart mobility to transportation systems, reduce traffic congestion, and improve safety of drivers and passengers by eliminating human errors. The safe operation …

Optimizing Transportation Systems With Information Provision, Personalized Incentives And Driver Cooperation, Sayeeda Ayaz

Doctoral Dissertations

Poor performance of the transportation systems has many detrimental effects such as higher travel times, increased travel costs, higher energy consumption, and greenhouse gas emissions, etc. This thesis optimizes the transportation systems by addressing the traffic congestion problem and climate change impact resulting from the inefficient operation of these systems. I first focus on the key player of the transportation systems e.g., human being/traveler, and model travelers' route choice behavior with real-time information. In this study, I define looking-ahead behavior in route choice as a traveler's taking into account future diversion possibilities enabled by real-time information in a network with …

Synthesis Of Technical Requirements And Considerations For Automated Snowplow Route Optimization: Final Report, Jonathan Dowds, James Sullivan

University of Vermont Transportation Research Center

DOTs and other transportation agencies are increasingly using automated methods for snowplow route optimization, which have been demonstrated to produce significant savings when they result in the implementation of new routes. However, many route optimization projects have fallen short of implementation due to technical/operational issues with the routes produced or institutional barriers to change. These shortcomings can be substantially mitigated with improvements to the process of soliciting, selecting, and managing the route optimization software or service provider. This project’s objective was to provide DOTs with the tools needed to make these improvements. The key lessons from this project are provided …

Multi-Objective Optimization Of Green Transportation Operations In Supply Chain Management, Nayera Elgharably

Electronic Thesis and Dissertation Repository

Supply chain is the integration of manufacturing process where raw materials are converted into final products, then delivered to customers. Supply chains consists of two basic integrated process that interact together: (1) production and inventory and (2) distribution and logistics. Maximizing competitiveness and profitability are of the main goals of a supply chain. Accounting only for economic impacts as variable and fixed costs does not serve the main goal of the supply chain. Therefore, considering customer satisfaction measures in distribution models is essential in supply chain management. Models that addressed the three objectives simultaneously handled one of the objectives as …

Optimization And Technology-Based Strategies To Improve Public Transit Performance Accounting For Demand Distribution, Charalampos Sipetas

Doctoral Dissertations

Public transit is important to societies worldwide. The operation of public transit systems is generally associated with great benefits for the users, but there are also cases in which these systems demonstrate inefficient performance. Quantifying transit performance is an important area of research over the last decades. This dissertation presents models to improve transit system performance through optimization techniques and new technologies, recognizing the effects of non-uniform distribution of demand over space and time. The contributions span fixed route transit services and on-demand transit, as well as models for flexible transit operations that lie in between. Regarding fixed route systems, …

Integrated Approach For Diversion Route Performance Management During Incidents, Rajib Chandra Saha

FIU Electronic Theses and Dissertations

Non-recurrent congestion is one of the critical sources of congestion on the highway. In particular, traffic incidents create congestion in unexpected times and places that travelers do not prepare for. During incidents on freeways, route diversion has been proven to be a useful tactic to mitigate non-recurrent congestion. However, the capacity constraints created by the signals on the alternative routes put limits on the diversion process since the typical time-of-day signal control cannot handle the sudden increase in the traffic on the arterials due to diversion. Thus, there is a need for proactive strategies for the management of the diversion …

Eco-Driving Systems For Connected Automated Vehicles: Multi-Objective Trajectory Optimization, Ke Huang, Xianfeng Yang

Mineta Transportation Institute Publications

This study aims to leverage advances in connected automated vehicle (CAV) technology to design an eco-driving and platooning system that can improve the fuel and operational efficiency of vehicles during freeway driving. Following a two-stage control logic, the proposed algorithm optimizes CAVs’ trajectories with three objectives: travel time minimization, fuel consumption minimization, and traffic safety improvement. The first stage, designed for CAV trajectory planning, is carried out with two optimization models. The second stage, for real-time control purposes, is developed to ensure the operational safety of CAVs. Based on extensive numerical simulations, the results have confirmed the effectiveness of the …

A Multi-Objective Optimization Model To Minimize The Gap In Accessibility To Multi-Use Paths While Maximizing The Economic Efficiency Of Active Transportation Investments For Fresno, California, Chih-Hao Wang

Mineta Transportation Institute Publications

This research examines the accessibility to multi-use paths in a variety of neighborhoods in Fresno, California. This study aims to develop a multi-objective optimization modeling framework to be used by decision makers in transportation and policy to maximize the total accessibility to multi-use paths across the city while minimizing the gap between low- and high- accessibility neighborhoods by an optimal allocation of active transportation. Researchers calculate accessibility to multi-use paths by measuring the total length of multi-use paths (walkway and bikeway) a resident could reach from their own Census block group with a 30-minute cycling ride. The study employs a …

Method Of Calendar Planning Of Construction Of The Complex At The Early Stage Of Design, M Mirakhmedov, M. Rasulmukhamedov, L.S. Yusupova

Journal of Tashkent Institute of Railway Engineers

The construction schedule developed in the construction organization project does not meet the requirements of the reserve for construction, is not based on the choice of construction and technological schemes and the method of construction organization, therefore, it is not sufficiently reliable, the evidence base stored in the project archive is not confirmed by calculations and Therefore, it cannot be subjected to reliable examination. To eliminate this drawback, a technique is proposed that takes into account the lack of information. The methodology is based on the graphanalytic model of the flow organization of the construction of the complex, which allows …

Multi-Objective Optimization Of A Ridesharing System Performance, Mohammad Nasr Azadani

Graduate Theses, Dissertations, and Problem Reports

Ridesharing is a shared vehicle service with the potential to meet the growing travel demand due to population increase, economic growth, and shortage in transportation infrastructure capacity. Compared to the current system of predominantly using personal vehicles, ridesharing services reduce the number of vehicles while providing mobility services to the same number of people with no additional investment in the transportation infrastructure. One of the big challenges in implementing ridesharing services is matching drivers and riders. Conflicts between matching-objectives to comply with the interests of diverse stakeholders influence the efficiency of ridesharing in a transportation system. This study investigates the …

Development Of Traffic Live Load Models For Bridge Superstructure Rating With Rbdo And Best Selection Approach, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Reliability-based design optimization (RBDO) is frequently used to determine optimal structural geometry and material characteristics that can best meet performance goals while considering uncertainties. In this study, the effectiveness of RBDO to develop a rating load model for a set of bridge structures is explored, as well as the use of an alternate Best Selection procedure that requires substantially less computational effort. The specific problem investigated is the development of a vehicular load model for use in bridge rating, where the objective of the optimization is to minimize the variation in reliability index across different girder types and bridge geometries. …

Designing An On-Demand Dynamic Crowdshipping Model And Evaluating Its Ability To Serve Local Retail Delivery In New York City, Shirin Najaf Abadi

Dissertations and Theses

Nowadays city mobility is challenging, mainly in populated metropolitan areas. Growing commute demands, increase in the number of for-hire vehicles, enormous escalation in several intra-city deliveries and limited infrastructure (road capacities), all contribute to mobility challenges. These challenges typically have significant impacts on residents’ quality-of-life particularly from an economic and environmental perspective. Decision-makers have to optimize transportation resources to minimize the system externalities (especially in large-scale metropolitan areas). This thesis focus on the intra-city mobility problems experienced by travelers (in the form of congestion and imbalance taxi resources) and businesses (in the form of last-mile delivery), while taking into consideration …

Modeling And Evaluation Of A Ridesharing Matching System From Multi-Stakeholders' Perspective, Md Tawhidur Rahman

Graduate Theses, Dissertations, and Problem Reports

With increasing travel demand and mobility service quality expectations, demand responsive innovative services continue to emerge. Ridesharing is an established, yet evolving, mobility option that can provide more customized, reliable shared service without any new investment in the transportation infrastructure. To maximize the benefits of ridesharing service, efficient matching and distribution of riders among available drivers can provide a reliable mobility option under most operating conditions. Service efficiency of ridesharing depends on the system performance (e.g., trip travel time, trip delay, trip distance, detour distance, and trip satisfaction) acceptable to diverse mobility stakeholders (e.g., riders, drivers, ridesharing operators, and transportation …

Towards Food Service Sustainability In Suburban Environments By Optimally Locating Shared Anaerobic Digester Units, Rebecca Loraamm, Joni Downs, Robert Alonso Bair, Daniel Yeh

Suburban Sustainability

Anaerobic digestion is an effective method for reducing food waste at the consumer level. Drawbacks associated with this strategy include high construction costs for multiple digester units and limited public awareness of the method’s commercial potential. Given the large scale problem of food waste, an approach establishing community partnerships between local businesses and primary schools is offered to combat the problem of food waste. Optimizing the placement of shared digester units enabling utilization by multiple stakeholders is the suggested mitigation method. This research explores application of the p-median problem to determine the set of optimal sites for shared anaerobic digester …

Innovative Gtfs Data Application For Transit Network Analysis Using A Graph-Oriented Method, Philippe Fortin, Catherine Morency, Martin Trépanier

Journal of Public Transportation

Public transit networks are constantly evolving in the face of frequent economic and social challenges. There exists a large knowledge base on travel demand; however, there is a shortage of information on travel supply and networks. To our knowledge, no analysis tool can, at this point, systematically characterize a network and observe changes over time in a structured and automated manner. This paper addresses this issue and proposes a graph-oriented method for developing an analysis tool that will characterize a single network and then provide the necessary means to compare two distinct networks. A time-expanded model was applied to import …

Optimization Of Headway, Stops, And Time Points Considering Stochastic Bus Arrivals, Liuhui Zhao

Dissertations

With the capability to transport a large number of passengers, public transit acts as an important role in congestion reduction and energy conservation. However, the quality of transit service, in terms of accessibility and reliability, significantly affects model choices of transit users. Unreliable service will cause extra wait time to passengers because of headway irregularity at stops, as well as extra recovery time built into schedule and additional cost to operators because of ineffective utilization of allocated resources.

This study aims to optimize service planning and improve reliability for a fixed bus route, yielding maximum operator’s profit. Three models are …

Maximizing Environmental Sustainability And Public Benefits Of Highway Construction Programs, Charinee Limsawasd

FIU Electronic Theses and Dissertations

Transportation agencies face a challenging task to repair damaged roads in an aging transportation network with limited funding. In addition, the funding gap is forecasted to continue widening, which has direct impacts on the performance of surface transportation networks and the nation’s economy in the long run. Recently, transportation agencies were required by a newly enacted law to include national performance-based goals, such as environmental sustainability, in their programming and planning efforts for highway repair and rehabilitation. Therefore, the current practice in the area of highway rehabilitation planning is inadequate to handle this task and new practices are needed to …

Seismic Isolation Of A Highly Skewed, Prestressed Concrete Girder Bridge, Bradley Robson, Issam Harik, David Allen

Issam E. Harik

A relatively new approach for designing or retrofitting highway bridges in seismic zones involves isolating the superstructure from the substructure. Through experimental and analytical investigations, this study evaluates the effectiveness of isolating one particular bridge: a highly skewed, prestressed concrete, slab-on-girder bridge. Dynamic testing of the bridge was performed using the pullback, quick-release method. A three dimensional finite element model of the bridge was created. It was refined, or calibrated, to match experimentally determined natural frequencies and mode shapes. Time-history analyzes, using site-specific acceleration records, were conducted for the seismically isolated bridge model and an identical, non-isolated bridge model.

For …

Optimization Of Vehicle Routing And Scheduling With Travel Time Variability - Application In Winter Road Maintenance, Haifeng Yu

Dissertations

This study developed a mathematical model for optimizing vehicle routing and scheduling, which can be used to collect travel time information, and also to perform winter road maintenance operations (e.g., salting, plowing). The objective of this research was to minimize the total vehicle travel time to complete a given set of service tasks, subject to resource constraints (e.g., truck capacity, fleet size) and operational constraints (e.g., service time windows, service time limit).

The nature of the problem is to design vehicle routes and schedules to perform the required service on predetermined road segments, which can be interpreted as an arc …

Optimization Models And Algorithms For Truckload Relay Network Design, Hector Andres Vergara Arteaga

Graduate Theses and Dissertations

Driver turnover is a significant problem for full truckload (TL) carriers that operate using point-to-point (PtP) dispatching. The low quality of life of drivers due to the long periods of time they spend away from home is usually identified as one of the main reasons for the high turnover. In contrast, driver turnover is not as significant for less-than-truckload (LTL) carriers that use hub-and-spoke transportation networks which allow drivers to return home more frequently. Based on the differences between TL and LTL, the use of a relay network (RN) has been proposed as an alternative dispatching method for TL transportation …

Analysis Of Marine Container Terminal Gate Congestion, Truck Waiting Cost, And System Optimization, Chang Qian Guan

Dissertations

As world container volume continues to grow and the introduction of 12,000 TEUs plus containerships into major trade routes, the port industry is under pressure to deal with the ever increasing freight volume. Gate congestion at marine container terminal is considered a major issue facing truckers who come to the terminal for container pickup and delivery. Harbor truckers operate in a very competitive environment; they are paid by trip, not by the hours they drive. Gate congestion is not only detrimental to their economic well-being, but also causes environmental pollution.

This thesis applies a multi-server queuing model to analyze marine …

Optimizing Fare Structure And Service Frequency For An Intercity Transit System, Feng-Ming Tsai

Dissertations

This study presents an approach to jointly optimize service headway and differentiated fare for an intercity transit system with an objective of total profit maximization and with consideration given to the economic and social sustainability of the system. Service capacity and fleet size constraints are considered. The optimization problem is structured into four scenarios which are comprised of the combinations of whether the Ranges of Travel Distance (RTD) is fixed or variable and if the time period is for a single period or for multiple periods. A successive substitution method (specifically, a modified Gauss Southwell method) is applied to solve …

Seismic Isolation Of A Highly Skewed, Prestressed Concrete Girder Bridge, Bradley Neil Robson, Issam E. Harik, David L. Allen

Kentucky Transportation Center Research Report

A relatively new approach for designing or retrofitting highway bridges in seismic zones involves isolating the superstructure from the substructure. Through experimental and analytical investigations, this study evaluates the effectiveness of isolating one particular bridge: a highly skewed, prestressed concrete, slab-on-girder bridge. Dynamic testing of the bridge was performed using the pullback, quick-release method. A three dimensional finite element model of the bridge was created. It was refined, or calibrated, to match experimentally determined natural frequencies and mode shapes. Time-history analyzes, using site-specific acceleration records, were conducted for the seismically isolated bridge model and an identical, non-isolated bridge model.

For …

Warrants And Guidelines For Installation Of Guardrail, Jerry G. Pigman, Kenneth R. Agent

Kentucky Transportation Center Research Report

Kentucky, as most other states, has in the past relied on the AASHTO "Barrier Guide'' for guidance in the installation of guardrail. Additional information related to barrier selection and installation was recently published in the form of the AASHTO "Roadside Design Guide. " However, considerable judgement is required for application of this information and it was determined that significant benefit could be derived from development of guidelines representative of conditions in Kentucky. Listed below are significant results from this study.

1. Results from a previous survey of guardrail standards and guidelines were summarized and it was found that only a few …