Engineering Commons^™

Modeling Heat Transfer During Cooling Of Ready-To-Eat Meat And Poultry Products Using Three-Dimensional Finite Element Analysis And Web-Based Simulation, Jihan F. Cepeda Jimenez

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The meat industry is required to comply with processing performance standards for preventing the growth of foodborne pathogens in products. These performance standards, established by the United States Department of Agriculture - Food Safety and Inspection Service (USDA-FSIS) require a reduction of Salmonella spp (lethality standard) and limit the growth of sporeforming bacteria (stabilization standard) in certain processed meat products. In general, strategies used to comply with these standards are associated with thermal processing. Meat processors have difficulties complying with these performance standards. Moreover, thermal processing deviations are an issue in the meat industry that generate uncertainty regarding the safety …

Modeling The Random Component Of Manufacturing Yield Of Integrated Circuits., David L. Farnsworth, Michael E. Long

Articles

A model is created for the number of integrated circuits that are good from each wafer on which they are fabricated. The goal is to separate the random or common cause loss from the systematic or special loss. The random loss from this type of process is modeled so that false alarms indicating systematic loss are less likely to occur and so that the structure of the systematic loss can be determined.

A Numerical And Experimental Study Of Differential Settling In Cohesive Sediment, Chad Heiliger

All Theses

Accurate sedimentation modeling has important applications in a number of fields. This includes modeling the accumulation of sediment in harbor channels and modeling the sedimentation and accumulation of particles in retention ponds in the still waters behind dams in order to calculate the trap efficiency. By accurately modeling sedimentation, engineering failures such as the 2008 TVA spill at the Kingston Fossil Plant could possibly be avoided. Three different numerical models comparing the settling rates of individual particles in quiescent waters were created to compare the change of settling velocity due to particle size distributions, change of local concentrations, and flocculation …

The Development And Validation Of A Finite Element Model Of A Canine Rib For Use With A Bone Remodeling Algorithm., Scott J. Sylliaasen

Master's Theses

Studies are currently being performed to determine the effects of bisphosphonate treatments on the structure and density of bone tissue. One of the pathways for gaining a better understanding of the effects of this and other treatments involves creating a computer simulation. Theory suggests that bone tissue structure and density are directly related to the manner in which the tissue is loaded. Remodeling is the process in which bone tissue is resorbed in areas of low stress distributions, and generated in areas of high stress distributions. Previous studies have utilized numerical methods and finite element methods to predict bone structure …

Modeling And Simulation Of Autonomous Thermal Soaring With Horizon Simulation Framework, Zhenhua Li

Master's Theses

A thermal is a column of warm rising air triggered by differential heating on the ground. In recent studies UAVs were programmed to exploit this free atmospheric energy from thermals to improve their range and endurance. Researchers had successfully flown UAVs autonomously with thermal soaring method. Most research involved some form of flight simulation. Improvements to the aircraft and thermal models for simulation purpose would enable researchers to better design their UAVs and explore any potential flaws in their designs. An aircraft simulation with a thermal environment was created in Horizon Simulation Framework, a modeling and verification framework that was …

Dual-Scale Modeling Of Two-Phase Fluid Transport In Fibrous Porous Media, Alireza Ashari

Theses and Dissertations

The primary objective of this research is to develop a mathematical framework that could be used to model or predict the rate of fluid absorption and release in fibrous sheets made up of solid or porous fibers. In the first step, a two-scale two-phase modeling methodology is developed for studying fluid release from saturated/unsaturated thin fibrous media made up of solid fibers when brought in contact with a moving solid surface. Our macroscale model is based on the Richards’ equation for two-phase fluid transport in porous media. The required constitutive relationships, capillary pressure and relative permeability as functions of the …

Plant Growth Modeling Using L-System Approach And Its Visualization, Atris Suyantohadi, Alfiyan Alfiyan, Mochamad Hariadi, Mauridhi Hery Purnomo

Makara Journal of Technology

The visualization of plant growth modeling using computer simulation has rarely been conducted with Lindenmayer System (L-System) approach. L-System generally has been used as framework for improving and designing realistic modeling on plant growth. It is one kind of tools for representing plant growth based on grammar sintax and mathematic formulation. This research aimed to design modeling and visualizing plant growth structure generated using L-System. The environment on modeling design used three dimension graphic on standart OpenGL format. The visualization on system design has been developed by some of L-System grammar, and the output graphic on three dimension reflected on …

Delay Modeling In Supply Network Dynamics: Performance, Synchronization, Stability, Rifat Sipahi

Rifat Sipahi

Recent research results in Industrial Engineering and Business disciplines specifically emphasize the critical role of delays in the functionality of supply networks. Delays are inevitable and pervasive; they arise due to the time needed for material deliveries, information flow and human perception towards adjusting to new decisions. Delays are endangering as they contaminate decision-making which ultimately leads to poor performance, synchronization problems and fluctuating inventory levels resulting in major economical losses. It is critical to state that inventory regulation and synchronization in supply networks even without delays is an open problem today due to large scale of the network, nonlinearities, …

Simulation Study On Vehicle Dispatching Strategies For Returnable Transport Packaging, Sagar V. Kamarthi, Surendra M. Gupta, Jarupan Lerpong

Surendra M. Gupta

Returnable transport packaging plays an important role in facilitating the transfer of a large volume of products in a close-loop distribution network. To make effective use of returnable transport packaging, vehicle dispatching strategies are crucial. With an appropriate vehicle dispatching strategy, for example, a fast turnover time and a short waiting time for packaging dispatch can be achieved. However, there are some factors that directly influence vehicle dispatching strategies. These factors include the arrival demand fluctuations, the availability of serving vehicles, and the geographic proximity of the facility to the customer's locations. In this study, authors investigate the effect of …

Energy Modeling Of Wireless Sensor Nodes Based On Petri Nets, Ali Shareef, Yifeng Zhu

Graduate Student Scholarly and Creative Submissions

Energy minimization is of great importance in wireless sensor networks in extending the battery lifetime. Accurately understanding the energy consumption characteristics of each sensor node is a critical step for the design of energy saving strategies. This paper develops a detailed probabilistic model based on Petri nets to evaluate the energy consumption of a wireless sensor node. The model factors critical components of a sensor node, including processors with emerging energy-saving features, wireless communication components, and an open or closed workload generator. Experimental results show that this model is more flexible and accurate than Markov models. The model provides a …

Observer Incorporated Neoclassical Controller Design: A Discrete Perspective, Winston Alexander Baker

Master's Theses (2009 -)

Control theory has generally been divided into two categories, modern control and classical control. Modern control uses state feedback to alter the pole locations of a given system. Classical control uses pre-compensation to alter the zeroes of the system and uses output feedback to adjust the poles to bring stability to the system. The drawback is that the application of classical control techniques can be a lengthy, complicated and iterative design process and in the end, classical control techniques still do not give information about the state of the system. Neoclassical control combines classical control techniques with the state feedback …

Picasso Interface For Horizon Simulation Framework, Brian E. Kirkpatrick

Master's Theses

The Horizon Simulation Framework, or HSF, is a modeling and simulation framework compiled from C/C++ source code into a command line program. Picasso is an interface designed to control the input files to Horizon by providing visual tools to create and manipulate the XML files used to define an HSF system of assets, their environment, and other simulation parameters. Picasso also supports the visualization of Horizon output in several different forms, and import mechanics from online space object catalogues.

Optimization And Correlation Of The Penn State Model Of Friction Stir Welding To Experimental Welds In 304l Stainless Steel, Devin Donaldson Furse

Theses and Dissertations

A numerical model of friction stir welding developed by T. DebRoy, R. Nandan, and others has been optimized to fit experimental data of eleven welds of 304L stainless steel at various weld feed rates and spindle speeds. Optimization was used to determine the values of five difficult-to-measure model parameters. The optimal parameter values were then correlated to the weld machine inputs. The mechanical efficiency and the coefficient of friction were not correlated with feed rate, spindle speed, or axial pressure. Tool slip was positively correlated with feed rate, negatively correlated with spindle speed, and not correlated with axial pressure. The …

Improving Analytical Travel Time Estimation For Transportation Planning Models, Chenxi Lu

FIU Electronic Theses and Dissertations

This dissertation aimed to improve travel time estimation for the purpose of transportation planning by developing a travel time estimation method that incorporates the effects of signal timing plans, which were difficult to consider in planning models. For this purpose, an analytical model has been developed. The model parameters were calibrated based on data from CORSIM microscopic simulation, with signal timing plans optimized using the TRANSYT-7F software. Independent variables in the model are link length, free-flow speed, and traffic volumes from the competing turning movements. The developed model has three advantages compared to traditional link-based or node-based models. First, the …

Numerical Computation Of Hydrodynamic Behavior Of Biomass Particles In Circulating Fluidized Beds, Afsin Gungor Dr.

The 13th International Conference on Fluidization - New Paradigm in Fluidization Engineering

A model using a particle based approach is developed to accurately predict the hydrodynamic behavior of biomass particles in CFBs. Generally, the change in the pressure gradient with height in CFB riser is small. Numerical results are in good agreement with experiments, both in form and magnitude.

Implications Of Climate-Driven Variability And Trends For The Hydrologic Assessment Of The Reynolds Creek Experimental Watershed, Idaho, V. Sridhar, Anurag Nayak

Civil Engineering Faculty Publications and Presentations

The Soil and Water Assessment Tool (SWAT) model was used to assess the implications of long-term climate trends for the hydroclimatology of the Reynolds Creek Experimental Watershed (RCEW) in the Owyhee Mountains, Idaho of the Intermountain West over a 40- year period (1967-2006). Calibration and validation of the macroscale hydrology model in this highly monitored watershed is key to address the watershed processes that are vulnerable to both natural climate variability and climate change and . The model was calibrated using the streamflow data collected between 1997 and 2006 from the three nested weirs, the Reynolds Mountain East (RME) , …

An Exploration Of Formal Methods And Tools Applied To A Small Satellite Software System, Russell J. Grover

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Formal system modeling has been a topic of interest in the research community for many years. Modeling a system helps engineers understand it better and enables them to check different aspects of it to ensure that there is no undesired or unexpected behavior and that it does what it was designed to do. This thesis takes two existing tools that were created to aid in the designing of spacecraft systems and creates a layer to connect them together and allow them to be used jointly. The first tool is a library of formal descriptions used to specify spacecraft behavior in …

Mathematical Modeling Of Light Utilization And The Effects Of Temperature Cycles On Productivity In A Steady-State Algal Photobioreactor, Peter Edwin Zemke

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The work presented here investigated two methods of improving productivity in microalgal photobioreactors: applying temperature cycles intended to maximize photosynthesis and minimize respiration, and development of a mathematical model that predicts improvements in photon utilization using temporal light dilution (flashing).

The experiments conducted on diurnal temperature cycles with Dunaliella tertiolecta in 30-L outdoor photobioreactors showed that a properly chosen temperature cycle can improve mass and energy productivity by 18% over an identical photobioreactor with a constant temperature. However, excessively large temperature cycle amplitudes reduced productivity. A 4-7% increase in energy content was observed in microalgae exposed to temperature cycles. The …

Dynamic Failure Properties Of The Porcine Medial Collateral Ligament-Bone Complex For Predicting Injury In Automotive Collisions., Kristen Billiar, Louis Peck, Malcolm Ray

Kristen L. Billiar

The goal of this study was to model the dynamic failure properties of ligaments and their attachment sites to facilitate the development of more realistic dynamic finite element models of the human lower extremities for use in automotive collision simulations. Porcine medial collateral ligaments were chosen as a test model due to their similarities in size and geometry with human ligaments. Each porcine medial collateral ligament-bone complex (n = 12) was held in a custom test fixture placed in a drop tower to apply an axial impulsive impact load, applying strain rates ranging from 0.005 s(-1) to 145 s(-1). The …

Business Modeling With The Support Of Multiple Notations In Requirements Engineering, Mohammad Moshiur Bhuiyan, Aneesh Krishna

Faculty of Engineering - Papers (Archive)

Requirements specification should not be concerned only with the software specification, but should also be able to integrate with the organizational models describing the environment in which the system will function. Agent–oriented conceptual modeling notations such as i* represents an interesting approach for modeling early phase requirements which includes organizational contexts, stakeholder intentions and rationale. Business Process Modeling notations such as BPMN are used to effectively conceptualize and communicate important process characteristics to relevant stakeholders. On the other hand, Unified Modeling Language (UML) is suitable for later phases of requirement capture which usually focus on completeness, consistency, and automated verification …

Evolutionary Modeling For Streamflow Forecasting With Minimal Datasets: A Case Study In The West Malian River, China, Qingwei Ni, Li Wang, Renzhen Ye, Fenglin Yang, Muttucumaru Sivakumar

Faculty of Engineering - Papers (Archive)

A large data set is generally needed when modeling hydrological processes. However, for developing countries such as China, data sets are often unavailable in remote areas. An attempt to apply a novel genetic programming (GP) technique was made to model the relationship between streamflow of the West Malian River and the impact of climate change in the northeastern part of China. Available annual streamflow and climatic data were used for training and testing of the GP model. Data from the years between 1982 and 2002 were used for automatic selection of the model relationship. Prediction of the model was undertaken …

Modeling Of Strip Shape During Cold Rolling Of Thin Strip, Zhengyi Jiang, Xiaozhong Du, Yi Du, Dongbin Wei, M Hay

Faculty of Engineering - Papers (Archive)

Strip shape is an important factor affecting the strip quality significantly during cold rolling of thin strip. In the paper, finite element simulation models of the strip shape in cold rolling for both symmetrical and asymmetrical rolling cases were successfully developed. The strip edge drop and the effect of the rolling force on the strip shape (the thickness distribution along the strip width) have been obtained. The developed finite element model has been verified with the experimental value, which shows they are in good agreement. The obtained results are applicable to control the rolled thin strip shape during cold rolling …

Hydrodynamic Modeling Of San Elijo Lagoon, California, Mary Elizabeth Nee Friedmann Bourgoyne

LSU Master's Theses

Decisions on where to concentrate management efforts need to be guided by an ability to accurately simulate and predict physical and ecological changes. Many restoration projects experience difficulties due to a lack of understanding of the ecological response and evolution of wetland systems (Goodwin et al., 2001). There are several approaches that can be taken in analyzing a system. The appropriate selection should be based on the available data, the spatial scale of the wetland, and the physical processes governing the system (Goodwin and Kamman, 2001). Predictive tools are essential for good long-term management (Goodwin et al., 2001). The objective …

Effect Of Magnetron Frequency On Heating Pattern In Domestic Oven, Sohan Birla, Krishnamoorthy Pitchai, Jeyamkondan Subbiah, David D. Jones

Department of Biological Systems Engineering: Conference Presentations and White Papers

In this study a computer model was developed to simulate microwave heating of a model food with a range of magnetron frequencies. The range was decided upon performing the frequency spectrum analysis of microwave leakage from the microwave oven. Simulation results showed that the magnetron input as sinusoidal frequency from 2.44 GHz to 2.48 GHz generates different heating profiles. The simulated heating profiles were compared with experimental heating profiles obtained by using an IR camera. None of simulations with individual frequency exactly matches with experimental temperature profile. The closet match between simulated and observed temperature profiles was found with 2.46 …

Aircraft Gearbox Dynamics Subject To Electromechanical Actuator Regenerative Energy Flow, Matthew S. Rutledge

Browse all Theses and Dissertations

To increase reliability and efficiency, standard aircraft components are being replaced with more electric subsystems aimed to reduce weight, conserve space, and improve energy management. One application of this process replaces standard hydraulic actuators used in flap or aileron movements with electromechanical actuators powered by an external generator. During different types of return movements, the electromechanical actuator will produce regenerative power that flows back through the generator and pulses into the engine-gearbox subsystem. The regenerative power, defined by characteristic amplitude, frequency, and other pulse attributes, coupled with the driving force produced by the engine may dramatically impact the performance and …

Slides: Groundwater Declines, Climate Change And Approaches To Adaptation, Katharine Jacobs

Western Water Law, Policy and Management: Ripples, Currents, and New Channels for Inquiry (Martz Summer Conference, June 3-5)

Presenter: Katharine Jacobs, Director of the Arizona Water Institute, University of Arizona

37 slides

Effect Of Liquid Dispersion On Corrosion Behavior Of Metals In Gas/Liquid/Solid Multiphase Corrosion Systems, Jing Jiang, Jia Wang

Journal of Electrochemistry

Liquid dispersion,described by the parameters of gas/liquid/solid three-phase boundary(TPB) zone of dispersed liquid on a metal surface,is an important property of liquid state influencing corrosion behavior of metals in gas/liquid/solid multiphase corrosion systems.In our paper,the characterisation of cathodic oxygen reduction process in TPB zone was discussed,and a model describing the cathodic process of TPB zone was developed.On this basis,the relationship between the cathodic limiting current and the TPB parameters was studied,and the simulation results were in good agreement with the experimental data.The role of liquid dispersion in atmospheric and sandy soil corrosion systems was also simulated.

Stochastic Spatio-Temporal Uncertainty In Gis-Based Water Quality Modeling Of The Land Water Interface, Ahmad Mohamad Salah

Theses and Dissertations

Integrated water resources management has been used for decades in various formats. The limited resources and the ever growing population keep imposing pressure on decision makers to better-, and reliably, manage the available waters. On the other hand, the continuous development in computing and modeling power has helped modelers and decision makers considerably. To use these models, assumptions have to be made to fill in the gaps of missing data and to approximate the current conditions. The type and amount of information available can also be used to help select the best model from the currently available models. Advances in …

Unified Large And Small Signal State-Space Based Modeling And Symbolic Simulation For Pwm Converters, Ehab Shoubaki

Electronic Theses and Dissertations

In this Dissertation, which concentrates on discrete modeling for control purposes of DC/DC converters and simulation through symbolic techniques. A Unified Discrete State-Space Model for power converters in CCM is presented. Two main approaches to arriving at the discrete model are used. The first approach involves an impulse function approximation of the duty cycle modulation of the converter switches, and this approach results in a small signal discrete model. The Second approach is direct and does not involve any approximation of the modulation, this approach yields both a large signal nonlinear discrete model and a linear small signal model. Harmonic …

Modeling Of The Interior Electric Field In Photovoltaic Cells, Tara Jeatran

The Journal of Undergraduate Research

With the emergence of photovoltaic technologies, there is a strong technological demand for high-performance photovoltaic devices. One of the most promising device concepts developed at SDSU is organic-based photovoltaic cells. The performance of the PV cells is controlled by charge generation and charge separation, and charge transportation processes. Extraordinary control over the properties of the organic photovoltaic materials will be needed in order for this research to succeed. Therefore, the interior electric field and the macro electric properties of the system are the foundation behind these facts and are critical properties on their performance. In this paper, the fundamentals of …