Engineering Commons^™

Methane Emissions Produced By Pneumatic Devices And Produced Water Tanks On Natural Gas Wellsites, Benjamin William Thornton

Graduate Theses, Dissertations, and Problem Reports

Abstract

Methane Emissions Produced by Pneumatic Devices and Produced Water Tanks on Natural Gas Wellsites

Benjamin W. Thornton

In recent years, more scrutiny has been placed on the release of greenhouse gasses (GHGs) by the oil and gas industry in North America as climate concerns increase. In the coming years, stricter regulations proposed by the Environmental Protection Agency (EPA) concerning the release of GHGs will further direct attention to GHG emissions quantification, modeling, and overall reduction. Active natural gas wellsites employ production equipment that routinely emits methane during normal operation. Production equipment often includes, but is not limited to, gas …

Modeling And Simulation Of A Process That Converts Ethane To Ethylene And Ethylene To Low Density Polyethylene, Ernest Bosire Mokaya

Graduate Theses, Dissertations, and Problem Reports

Ethylene is a critical feedstock and a major building block in the petrochemical industry that is used in synthesizing important products like polyethylene, ethanol, ethylene oxide, ethylene dichloride and ethylbenzene. With increasing demand of plastics, production of ethylene and subsequently polyethylene has increased globally. This thesis conducts the modeling and simulation of an integrated process that utilizes ethane as the primary feedstock to produce ethylene and the subsequent polymerization of ethylene to low-density polyethylene (LDPE). The process combines two different processes into one integrated process: (1) conversion of ethane to ethylene and (2) conversion of ethylene to LDPE. First, a …

Improving Real-Time Methane Monitoring In Longwall Coal Mines Through System Response Characterization Of A Multi-Nodal Methane Detection Network, Brian Philip Cappellini

Graduate Theses, Dissertations, and Problem Reports

Machine automation and atmospheric monitoring are used by many industries to improve safety and productivity in the workplace. The underground Methane Watchdog System (MWS) is a multi-nodal network of sensors currently under development. The MWS aims to improve safety and productivity by introducing 10 compact sampling units designed to be easily integrated within the current roof support equipment of the mine. Each unit contains an array of sensors used to continuously monitor the environmental conditions which include methane concentration, temperature, pressure, and relative humidity. All MWS units report information back to a remote central processing hub (CPH) which collects nodal …

Updates And Improvements To The Satellite Drag Coefficient Response Surface Modeling Toolkit, Phillip Logan Sheridan

Graduate Theses, Dissertations, and Problem Reports

For satellites in Low Earth Orbit, the drag coefficient is a major area of uncertainty. Researchers at the Los Alamos National Laboratory have created a Response Surface Modeling (RSM) toolkit to provide the community with a resource for simulating and modeling satellite drag coefficients in Free Molecular Flow. The toolkit combines the high fidelity of numerical simulation techniques with the speed of regression modeling. Specifically, it uses a training sample of drag coefficients simulated with the Test Particle Monte Carlo method with the robust Gaussian Process Regression approach. The RSM toolkit is the prime process to become a toolkit of …

Modeling Of Rotary Packed Beds For Reactive And Non-Reactive Systems, Chinyere Evangeline Ezeobinwune

Graduate Theses, Dissertations, and Problem Reports

Rotary packed beds (RPBs) are used in a wide range of reactive and non-reactive applications. In this research, a 2-d, first-principles, dynamic model of a non-reactive RPB that is used for heat exchange between the outgoing flue gas from a power plant and the incoming air to the boiler/pulverizer of the power plant is developed. A 2-d, first-principles model of a reactive RPB is developed where a functionalized metal-organic framework (MOF) is used for CO₂ capture.

For the non-reactive system, a Ljungstrom-type air preheater (APH) is considered. Existing models for these rotating heat exchangers are typically 1-d. There are …

Modeling And Tuning Of Cvt Systems For Sae® Baja Vehicles, Sean Sebastian Skinner

Graduate Theses, Dissertations, and Problem Reports

Continuously variable transmission (CVT) describes a family of transmission styles. These systems serve the same purpose as their traditional counterparts; transmitting power while offering a variable gearing ratio. The difference lies in the CVT’s ability to change ratio continuously between a minimum and maximum without halting power transfer. They offer many benefits of an automatic transmission while being significantly lighter. For this reason, CVTs are often used on Baja SAE^® vehicles to control gearing ratio.

WVU’s Baja team has used mechanical CVTs for many decades. These systems are simpler in the sense that they don’t require power to operate. …

Literature Review On Modeling Of Density Difference Pumping Strategy For Geothermal Applications, Lucas A. Ware

Graduate Theses, Dissertations, and Problem Reports

The utilization of geothermal ground heat sources has been demonstrated at both large and small scales across the world. However, methods of extraction of the hot working fluids are often a source of energy inefficiency and high capital expense. Current techniques to extract geothermal fluids rely on mechanically and electrically driven down-hole components that require maintenance on a regular basis. In providing a solution, one approach that reduces complexity, decreases maintenance, and allows access to fluids at greater depth is an airlift approach. The airlift approach relies on injection of gas at a depth within a geothermal well to lift …

Dynamic Discrepancy Reduced Order Modeling For Fischer-Tropsch Synthesis Over Cobalt-Based Catalyst, Jose Miguel Bohorquez

Graduate Theses, Dissertations, and Problem Reports

Advances in carbon capture techniques and demands in alternative fuel sources have increased over the past couple of decades. The Fischer-Tropsch Synthesis (FTS) provides a viable way to produce hydrocarbons from natural gas, coal, CO₂, or biomass. However, current comprehensive models for FTS encompass large number of reacting species, readsorption and conversion of primary products, surface intermediates, and coverage-dependent reaction rates. To accurately predict the products obtained through the process a reduced order model has been developed. By reducing the number of parameters of an existing comprehensive model, uncertainty is introduced. The uncertainty can be quantified by using …

Geotechnical Laboratory Testing For 2-D Fem Analysis Of Geomorphic And Planar Sloped Caps And Covers For Sustainable Mine Refuse Deposition, Sun Hee Park

Graduate Theses, Dissertations, and Problem Reports

This thesis reports the findings of the application of Geomorphic Landform Design principles to the Royal Scot abandoned coarse coal refuse (CCR) pile located in Greenbrier County, West Virginia. The Royal Scot facility has many environmental concerns including severe erosion, acid-mine/rock drainage, and sediment transport. A cap and cover system is proposed to be implemented which incorporates the GLD principles. A two-layer cap and cover system will be used to reclaim the site and return it back to a stable state and reduce the production of acid-mine drainage. The system is composed of a hydraulic barrier composed of compacted CCR, …

Lateral Torsional Buckling Response In Glass Fiber Reinforced Polymer Composite Beams And Comparison With Ansys Modeling & Design Equations, Santosh Vangala

Graduate Theses, Dissertations, and Problem Reports

Glass fiber reinforced polymer (GFRP) composites have the potential to replace the existing conventional materials in Civil Engineering like steel and concrete. Such potential can be attributed to the numerous advantages GFRP composites have over conventional materials. Some of the advantages are: high strength-to-weight ratio, corrosion resistance, low life cycle cost and maintenance, nonmagnetic and electronic transparency. As the application of GFRP is on the rise, the need for developing accurate design equations for these materials has been imperative. The GFRP composites are manufactured through pultrusion and although they have numerous advantages they are less stiff than similar profiles made …