Engineering Commons^™

Passive Method For 3d Reconstruction Of Human Jaw: Theory And Application., Mohamad Ghanoum

Electronic Theses and Dissertations

Oral dental applications based on visual data pose various challenges. There are problems with lighting (effect of saliva, tooth dis-colorization, gum texture, and other sources of specularity) and motion (even inevitable slight motions of the upper/ lower jaw may lead to errors far beyond the desired tolerance of sub-millimeter accuracy). Nowadays, the dental CAM systems have become more compromised and accurate to obtain the geometric data of the jaw from the active sensor (laser scanner). However, they have not met the expectations and the needs of dental professionals in many ways. The probes in these systems are bulky { even …

Implementation Of An Improved Image Enhancement Algorithm On Fpga, Prit Ghanshyambhai Patel

Electronic Theses and Dissertations

Image processing plays very crucial role in this digital human world and has rapidly evolved with the development of computers, mathematics and the real-life demand of variety of applications in wide range of areas. This wide range of areas includes remote sensing, machine/ robot vision, pattern recognition, medical diagnosis, video processing, military, agriculture, television, etc. Image processing has two important components which are image enhancement and information extraction. Since image enhancement works at the front end with the initial raw inputs, it works like a backbone in image processing. When it comes to implementing these image enhancement techniques and developing …

Simulation Of Fracture Strength Improvements Of A Human Proximal Femur Using Finite Element Analysis., Waleed Ebraheem Alim

Electronic Theses and Dissertations

The most common hip fracture in the elderly occurs as a result of a fall to the side with impact over the greater trochanter resulting in a fracture of the proximal femur. The fracture usually involves the femoral neck or the intertrochanteric region. It has recently been determined that the fracture crack of a hip fracture typically initiates on the superior-lateral cortex of the femoral neck and then propagates across the femoral neck, resulting in a complete fracture. The strength of the superior-lateral cortex of the femoral neck is likely determined by the combined properties of the generally thin cortex …

Bibliometric Survey On Image Processing Techniques Using Lattice Boltzmann Method For Cfd Simulations, Priyambada Praharaj Mrs, Chandrakant Sonawane Dr, Madhura Ingalhalikar Dr

Library Philosophy and Practice (e-journal)

This bibliometric analysis aims to understand how Lattice Boltzmann Method could be a potential solver in integrating computational fluid dynamics with image segmentation smoothly. Cardiovascular diseases have been a major health problem in our society and have been an interesting topic for researchers to focus on. Computational Fluid dynamics (CFD) simulation on well-segmented patient-specific images could help the clinicians in diagnosing many cardiovascular diseases in the initial stages itself thereby avoiding surgery. This paper focuses on how various methods have been used since 1988 and been successfully implemented in subsequent years. The bibliometric analysis is done from Scopus and the …

Optical Study Of 2-D Detonation Wave Stability, Eulaine T. Grodner

Theses and Dissertations

Fundamental optical detonation study of detonations constricted to a 2-d plane propagation, and detonations propagating around a curve. All images were processed using modern image processing techniques. The optical techniques used were shadowgraph, Schlieren, and chemiluminescence. In the 2-Dstraight channels, it was determined wave stability was a factor of cell size. It was also determined the detonation wave thickness (area between the combustion and shockwave) was a factor of how much heat available for the detonation. For the detonations propagating around a curve, it was determined the three main classifications of wave stability were stable, unstable, and detonation wave restart. …

Facilitating Analysis Of Toxoplasma Gondii Bradyzoite Metabolic Activity Via Image Processing And Multivariate Logistic Regression For High Throughput Classification Of Mitochondrial Morphologies, Brooke Place

Theses and Dissertations--Biomedical Engineering

Approximately a third of the population worldwide is chronically infected by the parasite Toxoplasma gondii. During chronic infection the parasite resides within tissue cysts as the poorly understood bradyzoite form. Observation of these bradyzoites via microscopic imaging within tissue cyst purified from infected mouse brains has shown metabolic activity with heterogeneous replication potential. With fluorescence microscopy imaging targeting the parasite’s actively respiring mitochondria, the parasite’s metabolic state can be further investigated as the morphology of mitochondria can be associated with specific physiologic states. However, manually classifying mitochondrial morphologies from these images can be tedious and prone to error as …

Correlating With Local Variation In Collagen Level And Mechanical Properties Of The Heart Tissues, Talayeh Tavangar

Electronic Theses and Dissertations

The determination of the myocardium's tissue properties is essential in constructing finite element (FE) models of the heart. To obtain accurate results, especially for functionally modeling the heart, we must determine the tissue properties in-vivo. The calculation of the heart tissue properties remains a challenging area as it is categorized as a heterogeneous, anisotropic, nonlinear soft tissue that undergoes large deformation. In this work, we tried to introduce and evaluated a finite element method to determine the mechanical properties of the cardiac tissue. The introduced method combined a finite element modeling with the experimentally obtained images from the left and …

Bibliometric Review On Image Based Plant Phenotyping, Shrikrishna Ulhas Kolhar, Jayant Jagtap

Library Philosophy and Practice (e-journal)

Plant phenotyping is a quantitative description of structural, physiological and temporal traits of plants resulting from interaction of plant genotypes with the environment. A rapid development is in progress in the field of image-based plant phenotyping. Plant phenotyping has wide range of applications in plant breeding research, plant growth prediction, biotic and abiotic stress analysis, crop management and early disease detection. The main motive is to provide detailed bibliometric review in order to know the available literature and current research trends in the area of plant phenotyping using plant images. The bibliometric analysis is primarily based on Scopus, web of …

A Two-Stage Hair Region Localization Method For Guided Laser Hair Removal, Murat Avşar, İmam Şami̇l Yeti̇k

Turkish Journal of Electrical Engineering and Computer Sciences

Removal of hair using laser is a widely used method, where our goal is to permanently remove hair by using laser to cause heat in order to thermally damage the hair follicle. However, currently available laser hair removal systems affect the outer skin layers besides hair follicles. This is a disadvantage of classical methods with major health risks. We propose a method to overcome these health risks by guiding the laser beam only to automatically localized hair regions. This study aims to develop an automated feature-based hair region localization method as an integral part of the proposed hair removal system …

A Novel Hybrid Decision-Based Filter And Universal Edge-Based Logical Smoothingadd-On To Remove Impulsive Noise, Rajanbir Singh Ghumaan, Prateek Jeet Singh Sohi, Nikhil Sharma, Bharat Garg

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a novel hybrid filter along with a universal extension to remove salt and pepper noise even at a very high noise density. The proposed filter initially specifies a threshold and then denoises the image using a combination of linear, nonlinear, and probabilistic techniques. Furthermore, to improve the quality, a universal add-on is presented which uses edge detection and smoothening techniques to brush out fine details from the restored image. To evaluate the efficacy, the proposed and existing filtering techniques are implemented in MATLAB and simulated with benchmark images. The simulation results show that the proposed filter is …

Measurement Of Micro Burr And Slot Widths Through Image Processing: Comparison Of Manual And Automated Measurements In Micro‐Milling, Fatih Akkoyun, Ali Ercetin, Kubilay Aslantas, Danil Yurievich Pimenov, Khaled Giasin, Avinash Lakshmikanthan, Muhammad Aamir

Research outputs 2014 to 2021

In this study, the burr and slot widths formed after the micro‐milling process of Inconel 718 alloy were investigated using a rapid and accurate image processing method. The measurements were obtained using a user‐defined subroutine for image processing. To determine the accuracy of the developed imaging process technique, the automated measurement results were compared against results measured using a manual measurement method. For the cutting experiments, Inconel 718 alloy was machined using several cutting tools with different geometry, such as the helix angle, axial rake angle, and number of cutting edges. The images of the burr and slots were captured …

Atmospheric Turbulence Distortion In Video: Restoration Utilizing Sparse Analysis, Benjamin J. Sanda

Dissertations

The removal of atmospheric turbulence (AT) distortion in long range imaging is one of the most challenging areas of research in imaging processing with an immediate need for solutions in several applications such as in military and transportation systems. AT exacerbates distortion due to non-linear geometric blur and scintillations in long-distance images and videos, severely reducing image quality and information interpretation. AT negatively impacts both human and computer vision systems, compromising visibility essential for accurate object identification and tracking.

In this dissertation, a novel sparse analysis framework is developed to address efficient AT blur and scintillation removal in video. Operating …

Application Of Artificial Intelligence And Geographic Information System For Developing Automated Walkability Score, Md Mehedi Hasan

Dissertations

Walking is considered as one of the major modes of active transportation, which contributes to the livability of cities. It is highly important to ensure walk friendly sidewalks to promote human physical activities along roads. Over the last two decades, different walk scores were estimated in respect to walkability measures by applying different methods and approaches. However, in the era of big data and machine learning revolution, there is still a gap to measure the composite walkability score in an automated way by applying and quantifying the activityfriendliness of walkable streets. In this study, a street-level automated walkability score was …

Deep Learning For Remote Sensing Image Processing, Yan Lu

Computational Modeling & Simulation Engineering Theses & Dissertations

Remote sensing images have many applications such as ground object detection, environmental change monitoring, urban growth monitoring and natural disaster damage assessment. As of 2019, there were roughly 700 satellites listing “earth observation” as their primary application. Both spatial and temporal resolutions of satellite images have improved consistently in recent years and provided opportunities in resolving fine details on the Earth's surface. In the past decade, deep learning techniques have revolutionized many applications in the field of computer vision but have not fully been explored in remote sensing image processing. In this dissertation, several state-of-the-art deep learning models have been …

Image Processing Of Technological Objects, Lyudmila Petrovna Varlamova

Chemical Technology, Control and Management

The article considers the problem of creating a smoke detection and fire detection system for technological objects. Fire detection is carried out using a vision system. Monitoring of technological objects is carried out using an unmanned aerial vehicle. For further actions, processing and classification of images is necessary. When observing the technological apparatuses of the chemical and petrochemical industry, problems arise associated with the large size, distribution and extent of objects. There may be situations in which there are violations of the technological regulations and, as a result, the occurrence of fire, fire and smoke. Using the technology of unmanned …

Measurement Error Correction Model Of Tof Depth Camera, Le Wang, Luo Yu, Haikuan Wang, Minru Fei

Journal of System Simulation

Abstract: 3D data intuitively reflects the full view of the target or scene. Time of Flight (ToF) camera is a range imaging sensor that can provide 3D geometric information of targets immediately, thus it is widely applied in the robot positioning and navigation, 3D reconstruction and other aspects etc. Due to the operational principle of the camera itself, there are variety measurement errors of the source data obtained by ToF, resulting in image distortion. The measurement errors in the imaging process of ToF camera were analyzed and summarized, and the cubic spline interpolation method combined with look-up table was proposed …

Vehicle Logo Recognition Based On Sparse Sampling And Gradient Distribution Features, Binbin Zhou, Shangbing Gao, Zhigeng Pan, Liangliang Wang, Hongyang Wang

Journal of System Simulation

Abstract: The vehicle logo location and recognition are separated in the traditional method, the location errors will affect the subsequent recognition, at the same time the vehicle logo images are with low resolution and poor quality. Thus, a novel method was proposed which integrated the vehicle logo location and recognition organically. The sample images were sampled by sparse sampling, and then the point set was divided into adjacent point set and non adjacent point set, and the gradient feature and light and dark feature were extracted respectively, constructing the feature library. The logo coarse location area was multi-scale scanned. The …

Applications Of Image Processing Techniques And Spatial Data Analytics For Pressure Mapping Analysis, Joan Yamil Martinez

Dissertations

The technological advancements in sensors, monitoring systems, and tracking devices are changing how we study our environment; big data sets are becoming more and more prevalent due to the increase of information gathered with ease. One system benefiting from these technological improvements is pressure mapping technology, an easy-to-use and cost-effective solution for assessing contact pressure distributions.

Pressure mapping systems generally produce data sets of very large volume, especially when used for continuous tracking and monitoring, and are widely used for research in fields of ergonomics, sports, industries, and health disciplines. Pressure mapping systems are particularly important in the study of …

Experimental And Computational Tools For Single Cell Analysis In Cancer Diagnostics, Manibarathi Vaithiyanathan

LSU Doctoral Dissertations

Substantial evidence shows that cellular heterogeneity commonly exists within an isogenic or clonal population. Whether in isolation or caused through a combination of the above events, cellular heterogeneity can dramatically influence cellular decision making and cell fate, however, this can be masked by the average response from a population. One approach to solve this issue is to analyze a population at the individual cell level. The goal of this work is to develop high-throughput experimental and computational platforms to screen and quantify single cancer cells for specific intracellular enzyme activities. An interdisciplinary approach was taken to 1) better understand the …

Automatic Shoreline Digitization And Mesh Element Sizing For Hydrodynamic Modeling, Henok Kefelegn

LSU Doctoral Dissertations

The first and most critical step in any coastal hydrodynamics and transport process modeling is identifying land-water boundaries. In a coastal wetland, this has always been a challenge due to the complexity of the wetland and lack of efficient methods, calling for efficient and effective methods to extract and digitize the shorelines. While coastline feature extraction has been increasingly researched, its application in hydrodynamic and environmental modeling, without morphological adjustment, remains limited and suboptimal. Further, there has been a paucity of cost-effective, contextually adaptive and high-quality methods to generate meshes, especially for coastal hydrodynamic modeling. This study has developed and …

Image Denoising Using Deep Convolutional Autoencoder With Feature Pyramids, Ekrem Çeti̇nkaya, Mustafa Furkan Kiraç

Turkish Journal of Electrical Engineering and Computer Sciences

Image denoising is 1 of the fundamental problems in the image processing field since it is the preliminary step for many computer vision applications. Various approaches have been used for image denoising throughout the years from spatial filtering to model-based approaches. Having outperformed all traditional methods, neural-network-based discriminative methods have gained popularity in recent years. However, most of these methods still struggle to achieve flexibility against various noise levels and types. In this paper, a deep convolutional autoencoder combined with a variant of feature pyramid network is proposed for image denoising. Simulated data generated by Blender software along with corrupted …

Anatomical Fraction Segmentation In The Biomass Bales, Rahul Reddy Kancharla, William A. Smith, Elisa H. Barney Smith, Jordan L. Klinger

Electrical and Computer Engineering Faculty Publications and Presentations

According to the Bioenergy Technologies Office (BETO), creating a robust next-generation domestic bioenergy industry is an essential pathway for providing sustainable renewable energy alternatives. Using non-food feedstocks, like corn-stover and forest residue, in the biorefineries doesn't affect the food supply chain. In the commercial-scale bioenergy operations, a significant development in the technological advancements is required to determine the biomass feedstock quality at the preprocessing stage. The penetrating ability of the x-rays helps study the big biomass bales, but the feedstock heterogeneity—physical size, shape, and chemical composition—poses a significant challenge during milling, conveyance, feeding, and biofuel conversion processes. The inherent complexity …

Video And Image Super-Resolution Via Deep Learning With Attention Mechanism, Xuan Xu

Graduate Theses, Dissertations, and Problem Reports

Image demosaicing, image super-resolution and video super-resolution are three important tasks in color imaging pipeline. Demosaicing deals with the recovery of missing color information and generation of full-resolution color images from so-called Color filter Array (CFA) such as Bayer pattern. Image super-resolution aims at increasing the spatial resolution and enhance important structures (e.g., edges and textures) in super-resolved images. Both spatial and temporal dependency are important to the task of video super-resolution, which has received increasingly more attention in recent years. Traditional solutions to these three low-level vision tasks lack generalization capability especially for real-world data. Recently, deep learning methods …

On Action Quality Assessment, Paritosh Parmar

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this dissertation, we tackle the task of quantifying the quality of actions, i.e., how well an

action was performed using computer vision. Existing methods used human body pose-based features to express the quality contained in an action sample. Human body pose estimation in actions such as sports actions, like diving and gymnastic vault, is particularly challenging, since the athletes undergo convoluted transformations while performing their routines. Moreover, pose-based features do not take into account visual cues such as water splash in diving. Visual cues are taken into account by human judges. In our first work, we show that using …

Identifying Regional Trends In Avatar Customization, Peter Mawhorter, Sercan Sengun, Haewoon Kwak, D. Fox Harrell

Research Collection School Of Computing and Information Systems

Since virtual identities such as social media profiles and avatars have become a common venue for self-expression, it has become important to consider the ways in which existing systems embed the values of their designers. In order to design virtual identity systems that reflect the needs and preferences of diverse users, understanding how the virtual identity construction differs between groups is important. This paper presents a new methodology that leverages deep learning and differential clustering for comparative analysis of profile images, with a case study of almost 100 000 avatars from a large online community using a popular avatar creation …

Foreground Removal In A Multi-Camera System, Daniel T. Mortensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traditionally, whiteboards have been used to brainstorm, teach, and convey ideas with others. However distributing whiteboard content remotely can be challenging. To solve this problem, A multi-camera system was developed which can be scaled to broadcast an arbitrarily large writing surface while removing objects not related to the whiteboard content. Related research has been performed previously to combine multiple images together, identify and remove unrelated objects, also referred to as foreground, in a single image and correct for warping differences in camera frames. However, this is the first time anyone has attempted to solve this problem using a multi-camera system. …

Thermal-Kinect Fusion Scanning System For Bodyshape Inpainting And Estimation Under Clothing, Sirazum Munira Tisha

LSU Master's Theses

In today's interactive world 3D body scanning is necessary in the field of making virtual avatar, apparel industry, physical health assessment and so on. 3D scanners that are used in this process are very costly and also requires subject to be nearly naked or wear a special tight fitting cloths. A cost effective 3D body scanning system which can estimate body parameters under clothing will be the best solution in this regard. In our experiment we build such a body scanning system by fusing Kinect depth sensor and a Thermal camera. Kinect can sense the depth of the subject and …

Block Form Of Kalman Filter In Processing Images With Low Resolution, Avazbek Marakhimov, Lyudmila Varlamova

Chemical Technology, Control and Management

The article discusses the issues of preliminary processing and image filtering. One of the problems with image preprocessing is the presence of blurring and noise. The problem of highlighting the background of a moving object. Next, consider the problem of constructing a Kalman filter of block type. When using the Kalman filter to solve the adaptive filtering problem, the monitored process is the vector of optimal filter coefficients. The purpose of applying the Kalman filter is to minimize the variance of the estimate of the vector random process. Noise filtering in the form of a block filter allows to restore …

Machine Learning And Image Processing For Noise Removal And Robust Edge Detection In The Presence Of Mixed Noise, Mehdi Mafi

FIU Electronic Theses and Dissertations

The central goal of this dissertation is to design and model a smoothing filter based on the random single and mixed noise distribution that would attenuate the effect of noise while preserving edge details. Only then could robust, integrated and resilient edge detection methods be deployed to overcome the ubiquitous presence of random noise in images. Random noise effects are modeled as those that could emanate from impulse noise, Gaussian noise and speckle noise.

In the first step, evaluation of methods is performed based on an exhaustive review on the different types of denoising methods which focus on impulse noise, …

Height Measurement Of Basil Crops For Smart Irrigation Applications In Greenhouses Using Commercial Sensors, Leila Bahman

Electronic Thesis and Dissertation Repository

Plant height is a key phenotypic attribute that directly represents how well a plant grows. It can also be a useful parameter in computing other important features such as yield and biomass. As the number of greenhouses increase, the traditional method of measuring plant height requires more time and labor, which increases demand for developing a reliable and affordable method to perform automated height measurements of plants. This research is aimed to develop a solution to automatically measure plant height in greenhouses using low cost sensors and computer vision techniques. For this purpose, the performance of various depth sensing technologies …