Engineering Commons^™

Measuring Nonlinear Properties Of Graphene Thin Films Using Z-Scan Technique, Thekrayat Hassan Al Abdulaal

Graduate Theses and Dissertations

The nonlinear studies of two-dimensional (2D) nanomaterials, specifically graphene, are very significant since graphene is finding its usefulness in handling the enormous heat in nanoscale high-density power electronics. Graphene has emerged to be a promising nanomaterial as an excellent heat spreader due to its high thermal conductivity. However, the experimental nonlinear study of graphene materials and their application in developing future optoelectronic devices demands for more developed research.

The research objective is first to build a precise, and sensitive technique to investigate and understand the thermal nonlinear properties, including nonlinear refractive index (n2), nonlinear absorption coefficient (β), and thermo-optic coefficient …

Fabrication And Characterization Of Conductive Melt Electrospun Fibers, Brandon Ross

Graduate Theses & Non-Theses

Conductive polymer nanocomposites are a type of particle reinforced plastic composite where the doping material is electrically conductive. The diverse properties of an engineered composite material allow for the material properties to be fine-tuned for the specific application. This research focuses on using carbon allotropes, such as two-dimensional graphene and one-dimensional carbon nanotubes, to achieve direct current electrical conductivity through a polymer fiber. Melt electrospinning is the process used for creating the micrometer scale fibers by melting thermoplastic materials. High electrostatic fields apply a force to the polymer melt and a single fiber is drawn out. The resistivity of the …

Inquiry Of Graphene Electronic Fabrication, John Rausch Greene

Master's Theses

Graphene electronics represent a developing field where many material properties and devices characteristics are still unknown. Researching several possible fabrication processes creates a fabrication process using resources found at Cal Poly a local industry sponsor. The project attempts to produce a graphene network in the shape of a fractal Sierpinski carpet. The fractal geometry proves that PDMS microfluidic channels produce the fine feature dimensions desired during graphene oxide deposit. Thermal reduction then reduces the graphene oxide into a purified state of graphene. Issues arise during thermal reduction because of excessive oxygen content in the furnace. The excess oxygen results in …

Crumpled Graphene Oxide: Aerosol Synthesis And Environmental Applications, Yi Jiang

McKelvey School of Engineering Theses & Dissertations

Environmental technologies, such as for water treatment, have advanced significantly due to the rapid expansion and application of nanoscale material science and engineering. In particular, two-dimensional graphene oxide (GO), has demonstrated considerable potential for advancing and even revolutionizing some of these technologies, such as engineered photocatalysts and membranes. To realize such potential, an industrially scalable process is needed to produce monomeric and aggregation-resistant GO nanostructures/composites, in addition to new knowledge of material properties, behavior, and performance within an environmental context.

Research presented in this thesis addresses both scientific and engineering gaps through the development of a simple, yet robust aerosol-based …

Computer Modeling Of Graphene Field Effect Transistors, Drew M. Ryan, Robert S. Bean

The Summer Undergraduate Research Fellowship (SURF) Symposium

Graphene has been the centerpiece of numerous research projects since its discovery in 2004, greatly due to its multitude of unique properties. Its variable conductivity, relative strength, and electron mobility make graphene a prime candidate for applications in the field of radiation detection. While work has been performed in the past on testing radiation detection using graphene using Graphene Field Effect Transistors (GFET), due to its limited size, fabricating GFETs can be tedious and costly. Therefore, a need arose for a way to test potential GFET designs without the cost and limitations of fabricating GFETs for each test iteration. Using …

Nano-Crystalline Metal Matrix Nano-Composites Reinforced By Graphene And Alumina: Effect Of Reinforcement Properties And Concentration On Mechanical Behavior, Meysam Tabandeh Khorshid

Theses and Dissertations

Metal matrix composites (MMCs) and Metal Matrix Nano-composites (MMNCs) are promising materials for a number of aerospace, defense, and automobile applications. Among all MMCs and MMNCs, aluminum is the most widely used matrix due to its low density coupled with high stiffness, high specific strength, high specific modulus and low thermal expansion coefficient. While high strengths have been shown in MMCs, they are known to have very limited ductility. However, there are indications that reducing reinforcement size to the nanoscale may improve strain to failure in addition to increase strength. Reducing grain size to the nanoscale has been found to …

Sonochemical Synthesis Of Zinc Oxide Nanostructures For Sensing And Energy Harvesting, Phani Kiran Vabbina

FIU Electronic Theses and Dissertations

Semiconductor nanostructures have attracted considerable research interest due to their unique physical and chemical properties at nanoscale which open new frontiers for applications in electronics and sensing. Zinc oxide nanostructures with a wide range of applications, especially in optoelectronic devices and bio sensing, have been the focus of research over the past few decades. However ZnO nanostructures have failed to penetrate the market as they were expected to, a few years ago. The two main reasons widely recognized as bottleneck for ZnO nanostructures are (1) Synthesis technique which is fast, economical, and environmentally benign which would allow the growth on …

Preparation And Characterization Of Van Der Waals Heterostructures, Horacio Coy Diaz

USF Tampa Graduate Theses and Dissertations

In this dissertation different van der Waals heterostructures such as graphene-MoS₂ and MoTe₂-MoS₂ were prepared and characterized. In the first heterostructure, polycrystalline graphene was synthesized by chemical vapor deposition and transferred on top of MoS₂ single crystal. In the second heterostructure, MoTe₂ monolayers were deposited on MoS₂ by molecular beam epitaxy.

Characterization of graphene-MoS₂ heterostructures was conducted by spin and angle resolve spectroscopy which showed that the electronic structure of the bulk MoS₂ and graphene in this van der Waals heterostructures is modified. For MoS₂ underneath the graphene, a band …

Microstructure And Mechanical Properties Of Nanofiller Reinforced Tantalum-Niobium Carbide Formed By Spark Plasma Sintering, Christopher Charles Rudolf

FIU Electronic Theses and Dissertations

Ultra high temperature ceramics (UHTC) are candidate materials for high temperature applications such as leading edges for hypersonic flight vehicles, thermal protection systems for spacecraft, and rocket nozzle throat inserts due to their extremely high melting points. Tantalum and Niobium Carbide (TaC and NbC), with melting points of 3950°C and 3600°C, respectively, have high resistivity to chemical attack, making them ideal candidates for the harsh environments UHTCs are to be used in. The major setbacks to the implementation of UHTC materials for these applications are the difficulty in consolidating to full density as well as their low fracture toughness. In …

Graphene And Carbon Nanotube Pla Composite Feedstock Development For Fused Deposition Modeling, Austin Plymill, Robert Minneci, Duncan Alexander Greeley, Jack Gritton

Chancellor’s Honors Program Projects

No abstract provided.

Graphene’S Electronic Surface States On Metal Substrates, Alex De Palma

Nanoscale Science & Engineering (discontinued with class year 2014)

Graphene is a 2-­‐D sheet of sp2 bonded carbon atoms with exceptional electrical properties. Particularly, graphene has a very high carrier mobility (~200,000 cm2/V·∙s). This is largely due to graphene’s unique electronic structure, wherein charge carriers are effectively massless Dirac fermions. However, the unique electronic structure of graphene has been shown to be affected by the underlying substrate. In this study, we characterize the electronic structure of graphene on copper. Electron energy loss spectroscopy is employed to observe the surface plasmon excitations of graphene. A small pi plasmon excitation is observed, suggesting that the graphene/Cu interaction is weak and non-­‐covalent. …

An Equivalent Circuit Model For Graphene-Based Terahertz Antenna Using The Peec Method, Ying S. Cao, Li (Lijun) Jun Jiang, Albert E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

The electromagnetic (EM) characterization of graphene under general EM environments is becoming of interest in the engineering and scientific research fields. However, its numerical modeling process is extremely cost prohibitive due to the huge contrast between its thickness and other dimensions. In this work, for the first time, the EM features of graphene are characterized by a circuit model through the partial element equivalent circuit (PEEC) method. The atomically thick graphene is equivalently replaced by an impedance boundary condition. After incorporating the PEEC method, a novel surface conductivity circuit model is derived for graphene. A physical resistor and inductor are …

Visible-Light-Responsible Co-Catalysts Enhanced By Graphene For Solar Energy Harvesting, Chen Ying

Masters Theses & Specialist Projects

This study focuses on the visible light response of hetero-structures of TiO2-graphene- MoS2 for solar energy harvestings. The commercial P25 TiO2 nano-particles, and selfprepared layered reduced graphene oxides (RG) and MoS2 were assembled for the targeted hetero-structure materials as visible-light responsible solar harvesting cocatalysts. The hydrothermal method was applied for nano-material synthesis, the reduction of graphene oxides, and bonding formation. Multiple characterization methods (SEM-TEM, XRD, XPS, UV-VIS, PL, FT-IR, TGA) have been applied to understand the electron-hole pair separation and recombination, and performance tuning in their visible-light photo-catalysis rhodamine B (Rh.B) degradations process

Compared to TiO2, an obvious red shift …

Advanced Graphene Microelectronic Devices, Chowdhury G. Al-Amin

FIU Electronic Theses and Dissertations

The outstanding electrical and material properties of Graphene have made it a promising material for several fields of analog applications, though its zero bandgap precludes its application in digital and logic devices. With its remarkably high electron mobility at room temperature, Graphene also has strong potential for terahertz (THz) plasmonic devices. However there still are challenges to be solved to realize Graphene’s full potential for practical applications.

In this dissertation, we investigate solutions for some of these challenges. First, to reduce the access resistances which significantly reduces the radio frequency (RF) performance of Graphene field effect transistors (GFETs), a novel …

Large-Area Graphene-Based Nanofiltration Membranes By Shear Alignment Of Discotic Nematic Liquid Crystals Of Graphene Oxide, Abozar Akbari, Phillip Sheath, Samuel T. Martin, Dhanraj B. Shinde, Mahdokht Shaibani, Parama Chakraborty Banerjee, Rachel Tkacz, Dibakar Bhattacharyya, Mainak Majumder

Chemical and Materials Engineering Faculty Publications

Graphene-based membranes demonstrating ultrafast water transport, precise molecular sieving of gas and solvated molecules shows great promise as novel separation platforms; however, scale-up of these membranes to large-areas remains an unresolved problem. Here we demonstrate that the discotic nematic phase of graphene oxide (GO) can be shear aligned to form highly ordered, continuous, thin films of multi-layered GO on a support membrane by an industrially adaptable method to produce large-area membranes (13 × 14 cm²) in < 5 s. Pressure driven transport data demonstrate high retention (> 90%) for charged and uncharged organic probe molecules with a hydrated radius above 5 Å as well as modest (30–40%) retention of …

Silk-Derived Graphene-Like Carbon With High Electrocatalytic Activity For Oxygen Reduction Reaction, Qingfa Wang, Ruoping Yanzhang, Yaqing Wu, Han Zhu, Junfeng Zhang, Mingliang Du, Ming Zhang, Li Wang, Xiangwen Zhang, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

A facile method to prepare the nanoporous and graphene-like carbon material from a natural silk fiber was developed by a potassium intercalation and carbonization procedure. The as-synthesized graphene-like fiber was employed for oxygen reduction reaction and exhibited impressive electrocatalytic activity.

Electrochemical H2O2Sensor Based On The Co-Immobilization Of Phosphmolybdic Acid And Graphene On Pedot Film Electrode With Nafion, Hao-Xian Zhou, Jun-Ming Zhang, Zhi-Yu Qu, Pan-Yu Zhang, You-Jun Fan

Journal of Electrochemistry

With a glassy carbon electrode (GCE) as the substrate, the poly(3,4-ethylenedioxythiophene) (PEDOT) film electrode was prepared through the electrochemical polymerization method, then a novel non-enzymatic electrochemical H₂O₂ sensor was fabricated by co-immobilizing phosphomolybdic acid and graphene with Nafion on the PEDOT/GCE electrode. The modified electrodes were characterized by scanning electron microscopy (SEM), while the responsive properties of the sensor to H₂O₂ were investigated by cyclic voltammetry and chronoamperometry. The results demonstrated that, under the optimized conditions, the sensor exhibited good electrocatalytic performance for H₂O₂ reduction. The current response of the sensor …

Electrochemical Syntheses Of Graphene And Its Composites, Bo Zhao, Li Jiang, Ming-Hui Yuen, Xian-Zhu Fu, Rong Sun, Ching-Ping Wong

Journal of Electrochemistry

Graphene is a kind of ideal two-dimensional flat carbon nanomaterials which have unique chemical and physical properties. The attractive potential applications must be based on the high quality mass production of graphene. However, it remains a huge challenge.An electrochemical approach is a fast, environmental friendly and easy-operating method. single- or multi-layered graphene flakes can easily be produced in short periods of time. In this review, the structure, properties and preparation methods of graphene are first introduced. Accordingly, the electrochemical approaches used for the productions of graphene flakes，graphene/inorganic nanocomposites, graphene/polymer composites and graphene analogues are highlighted. Finally, challenges and opportunities are …

Design And Optimization Of Lithium Ion Battery For High Temperature Applications, Khalid Abdullitife Ababtain

Wayne State University Dissertations

With massive commercial success of lithium ion batteries, the ability to operate at

and above 70 °C still a crucial issue and a safety concern to combat ever-increasing

global warming and to extend applications beyond portable electronics. Among various

components of battery, anode and electrolyte and the passivation layer formed between

them is crucial towards the development of Li-ion batteries for extendable temperature

range. In this regard, room temperature ionic liquids (RTILs) have the capability to

tackle thermal stability issues of lithium ion batteries but their poor compatibility with

traditional graphite anodes limits their practical application. Towards addressing this

issue, …

Liquid-Phase Exfoliation Of Two-Dimensional Graphite For Ink-Jet Printing, Monica Michel

Open Access Theses & Dissertations

Over the last decade, the study of two-dimensional (2D) materials has seen an incredible growth due to their unique thermal, mechanical and electronic properties. Solution phase manufacturing offers a way in which they can be produced at large scale by creating dispersions from the exfoliated material. Once created, different options for assembling devices exist. One technique for large scale manufacturing of materials in this form is ink-jet printing, which is a form of additive manufacturing that has proven to be attractive for the printed electronics industry. One challenge that ink-jet printing still faces is the shortage of inks with appropriate …

Characterisation Of Graphene Fibres And Graphene Coated Fibres Using Capacitively Coupled Contactless Conductivity Detector, Joan M. Cabot, Emer Duffy, Sinead Currivan, Andres Ruland Palaia, Rouhollah Jalili, Attila J. Mozer, Peter C. Innis, Gordon G. Wallace, Michael C. Breadmore, Brett Paull

Australian Institute for Innovative Materials - Papers

The use of capacitively coupled contactless conductivity detection (C 4 D) for the characterisation of thin conductive graphene fi bres, graphene composite fi bres, and graphene coated fi brous materials is demon- strated for the fi rst time. Within a few seconds, the non-destructive C 4 D detector provides a pro fi le of the longetudinal physical homogeneity of the fi bre, as well as extra information regarding fi bre mophology and composition. In addition to the theoretical considerations related to the factors a ff ect the output signal, this work evaluates the properties of graphene fi bres using scanning …

Nitrogen-Doped Graphene Ribbon Assembled Core-Sheath Mno@Graphene Scrolls As Hierarchically Ordered 3d Porous Electrodes For Fast And Durable Lithium Storage, Yun Zhang, Penghui Chen, Xu Gao, Bo Wang, Heng Liu, Haobin Wu, Hua-Kun Liu, Shi Xue Dou

Australian Institute for Innovative Materials - Papers

Graphene scroll is an emerging 1D tubular form of graphitic carbon that has potential applications in electrochemical energy storage. However, it still remains a challenge to composite graphene scrolls with other nanomaterials for building advanced electrode configuration with fast and durable lithium storage properties. Here, a transition-metal-oxide-based hierarchically ordered 3D porous electrode is designed based on assembling 1D core-sheath MnO@N-doped graphene scrolls with 2D N-doped graphene ribbons. In the resulting architecture, porous MnO nanowires confined in tubular graphene scrolls are mechanically isolated but electronically wellconnected, while the interwoven graphene ribbons offer continuous conductive paths for electron transfer in all directions. …

Oxygen-Free Layer-By-Layer Assembly Of Lithiated Composites On Graphene For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Xiaowei Chen, Fang Fang, Dalin Sun, Xingguo Li, Zaiping Guo, Xuebin Yu

Australian Institute for Innovative Materials - Papers

A facile hydrogenation-induced self-assembly strategy to synthesize lithium hydride (LiH) nanosheets with a thickness of 2 nm that are uniformly distributed on graphene is reported and designed. Taking advantage of LiH nanosheets with high reactivity and a homogeneous distribution on graphene support as a nanoreactor, the confined chemical synthesis of oxygen-free lithiated composites is effectively and efficiently realized.

Nonlocal Transistor Based On Pure Crossed Andreev Reflection In A Euo-Graphene/Superconductor Hybrid Structure, Yee Sin Ang, Lawrence Ang, C Zhang, Zhongshui Ma

Faculty of Engineering and Information Sciences - Papers: Part A

We study the interband transport in a superconducting device composed of graphene with EuO-induced exchange interaction. We show that pure crossed Andreev reflection can be generated exclusively without the parasitic local Andreev reflection and elastic cotunnelling over a wide range of bias and Fermi levels in an EuO-graphene/superconductor/EuO-graphene device. The pure nonlocal conductance exhibits rapid on-off switching and oscillatory behavior when the Fermi levels in the normal and the superconducting leads are varied. The oscillation reflects the quasiparticle propagation in the superconducting lead and can be used as a tool to probe the subgap quasiparticle mode in superconducting graphene, which …

Confined Sno2 Quantum-Dot Clusters In Graphene Sheets As High-Performance Anodes For Lithium-Ion Batteries, Chengling Zhu, Shenmin Zhu, Kai Zhang, Zeyu Hui, Hui Pan, Zhixin Chen, Yao Li, Di Zhang, Dawei Wang

Faculty of Engineering and Information Sciences - Papers: Part A

Construction of metal oxide nanoparticles as anodes is of special interest for next-generation lithium-ion batteries. The main challenge lies in their rapid capacity fading caused by the structural degradation and instability of solid-electrolyte interphase (SEI) layer during charge/discharge process. Herein, we address these problems by constructing a novel-structured SnO₂-based anode. The novel structure consists of mesoporous clusters of SnO₂ quantum dots (SnO₂ QDs), which are wrapped with reduced graphene oxide (RGO) sheets. The mesopores inside the clusters provide enough room for the expansion and contraction of SnO₂ QDs during charge/discharge process while the integral structure …

Encapsulation Of Fe3o4 Nanoparticles Into N, S Co-Doped Graphene Sheets With Greatly Enhanced Electrochemical Performance, Zunxian Yang, Kun Qian, Jun Lv, Wenhuan Yan, Jiahui Liu, Jingwei Ai, Yuxiang Zhang, Tailiang Guo, Xiongtu Zhou, Sheng Xu, Zaiping Guo

Faculty of Engineering and Information Sciences - Papers: Part A

Particular N, S co-doped graphene/Fe₃O₄ hybrids have been successfully synthesized by the combination of a simple hydrothermal process and a subsequent carbonization heat treatment. The nanostructures exhibit a unique composite architecture, with uniformly dispersed Fe₃O₄ nanoparticles and N, S co-doped graphene encapsulant. The particular porous characteristics with many meso/micro holes/pores, the highly conductive N, S co-doped graphene, as well as the encapsulating N, S co-doped graphene with the high-level nitrogen and sulfur doping, lead to excellent electrochemical performance of the electrode. The N-S-G/Fe₃O₄ composite electrode exhibits a high initial reversible capacity …

Graphene/Pvdf Flat-Sheet Membrane For The Treatment Of Ro Brine From Coal Seam Gas Produced Water By Air Gap Membrane Distillation, Yun Chul Woo, Youngjin Kim, Wang-Geun Shim, Leonard D. Tijing, Minwei Yao, Long D. Nghiem, June-Seok Choi, Seung-Hyun Kim, Ho Kyong Shon

Faculty of Engineering and Information Sciences - Papers: Part A

No abstract provided.

Graphene-Wrapped Reversible Reaction For Advanced Hydrogen Storage, Guanglin Xia, Yingbin Tan, Feilong Wu, Fang Fang, Dalin Sun, Zaiping Guo, Zhenguo Huang, Xuebin Yu

Australian Institute for Innovative Materials - Papers

Here, we report the fabrication of a graphene-wrapped nanostructured reactive hydride composite, i.e., 2LiBH4-MgH2, made by adopting graphene-supported MgH2 nanoparticles (NPs) as the nanoreactor and heterogeneous nucleation sites. The porous structure, uniform distribution of MgH2 NPs, and the steric confinement by flexible graphene induced a homogeneous distribution of 2LiBH4-MgH2 nanocomposite on graphene with extremely high loading capacity (80 wt%) and energy density. The well-defined structural features, including even distribution, uniform particle size, excellent thermal stability, and robust architecture endow this composite with significant improvements in its hydrogen storage performance. For instance, at a temperature as low as 350 °C, a …

Reduction Of Mutual Coupling In Antenna Technology Using Elliptically Shaped Metasurfaces, Gabriel Moreno

Electronic Theses and Dissertations

This thesis is devoted to the use of metasurfaces for the goals of the reduction of mutual coupling between closely spaced antennas and the increase of antenna bandwidth. This is done first using a graphene monolayer as a cloak to decrease mutual coupling and restore radiation patterns for closely spaced antennas at THz frequencies. The introduction of the graphene monolayer was also extensively studied in regards to the effect on the radiation properties of the antennas. The use of metasurfaces also has other applications, in particular with the bandwidth of antennas, where an anisotropic metasurface can be used to drastically …

Thermoelectric Transport And Energy Conversion Using Novel 2d Materials, Luke J. Wirth

Browse all Theses and Dissertations

Nanomaterials hold great promise for applications in thermal management and thermoelectric power generation. Defects in these are important as they are generally inevitably introduced during fabrication or intentionally engineered to control the properties of the nanomaterials. Here, we investigate how phonon-contributed thermal conductance in narrow graphene, boron nitride (BN), and silicene nanoribbons (NRs), responds to the presence of a vacancy defect and the corresponding geometric distortion, from first principles using the non-equilibrium Green's function method. Analyses are made of the geometries, phonon conductance coefficients, and local densities of states (LDOS) of pristine and defected nanoribbons. It is found that hydrogen …