Engineering Commons^™

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Hydropower System Design In Nazarét, Panama, Claudia M. Bible, Matthew J. Tolson, Andrew Houser, Aj Condra, Nathan Smith

Chancellor’s Honors Program Projects

No abstract provided.

Building Services Engineering January/February 2022

Building Services Engineering

No abstract provided.

Application Of Using Fault Detection Techniques In Different Components In Power Systems, Mohamed Yahia Abd-Alkader, Ahmed M. Ebid Dr., Ibrahim Mahdi, Ibrahim Abdelrashed Nosseir

Future Engineering Journal

Throughout the years, Fault detection has been one of the most frequently discussed topics in the scientific community at present. Consequently, it has been extensively studied and focused on in recent years. This scientific paper presents some of this research, what they have reached, and the methods used for their studies. The literature review provides that these problems are not covered yet. It needs more works to develop fault detection techniques for better performance.

Building Services Engineering November/December 2021

Building Services Engineering

No abstract provided.

Building Services Engineering September/October 2021

Building Services Engineering

No abstract provided.

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …

Building Services Engineering July/August 2021

Building Services Engineering

No abstract provided.

Building Services Engineering May/June 2021

Building Services Engineering

No abstract provided.

Meta-Network Analysis Of Complex Construction Systems: Improving Project Efficiency Using Novel Computer-Based Analytic Methodology, Ethan Cummiskey

Honors Scholar Theses

The objective of this study is to build upon the framework of a meta-network approach to assessing vulnerabilities in construction projects. By viewing these complex environments as configurations of various nodes and links, it is possible to show the relationship between each entity in the project and the overall completion that is achieved from these connections. To expand upon previous studies, the vulnerabilities measured from this approach will be used to optimize the current network to eliminate any shortcoming in the project model. By investigating the congruence of different agents on the project, resources and informational nodes can be supplied …

Bs News March/April

Building Services Engineering

No abstract provided.

Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield

All Undergraduate Projects

What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …

Building Services Engineering January/February

Building Services Engineering

No abstract provided.

Bs News November/December

Building Services Engineering

No abstract provided.

Bs News September/October

Building Services Engineering

No abstract provided.

Bs News July/August

Building Services Engineering

No abstract provided.

Bs News May/June

Building Services Engineering

No abstract provided.

Targeted Presentation Skill Trainings To Nurture Construction Management Students At Florida International University, Gabriella D. Santi Kasabdji

FIU Electronic Theses and Dissertations

In today’s fast-paced work environment, competent construction managers (CM) are vital for project success. However, to be competent, these professionals require the mastery of not only technical skills but also soft skills that enable them to achieve their full potential. Regardless, many CM prize technical abilities over the day-to-day writing, speaking, and overall soft skills, assuming these are not as important to the knowledge of complex concepts. Industry leaders confirm this, as evidence states graduate construction managers lack the basic communication skills to “hit the ground running”. That said, academic programs should seek to adapt and nurture these vital skill …

Bs News March/April

Building Services Engineering

No abstract provided.

Seismic Response Mitigation Of Base-Isolated Buildings, Mohammad Hamayoun Stanikzai, Said Elias, Rajesh Rupakhety

Civil & Environmental Engineering Faculty Publications

Earthquake response mitigation of a base-isolated (BI) building equipped with (i) a single tuned mass damper at the top of the building, (ii) multiple tuned mass dampers (MTMDs) at the top of the building, and (iii) MTMDs distributed on different floors of the building (d-MTMDs) is studied. The shear-type buildings are modeled by considering only one lateral degree of freedom (DOF) at the floor level. Numerical approach of Newmark's integration is adopted for solving the coupled, governing differential equations of motion of 5- and 10-story BI buildings with and without TMD schemes. A set of 40 earthquake ground motions, scaled …

Bs News January/February

Building Services Engineering

No abstract provided.

Bs News November/December

Building Services Engineering

No abstract provided.

Bs News September/October

Building Services Engineering

No abstract provided.

Bs News July/August

Building Services Engineering

No abstract provided.

Bs News May/June

Building Services Engineering

No abstract provided.