Engineering Commons^™

Developing Guidelines For Including Mobility-Based Performance Specifications In Highway Construction Contracts, Shawn J. Larson

Theses and Dissertations

Construction zones can greatly affect the traffic flow on roadways, especially when lane closures are required. Traditionally, the Utah Department of Transportation (UDOT) has used traffic management specifications that only allow lane closures and road work to be done during predetermined hours or specifications that require a certain number of lanes to be open at all times. Recently, mobility-based work-zone traffic flow maintenance has been considered. This method requires continuous monitoring of mobility-based performance data and a mechanism to send alerts to the contractors when the mobility data does not meet the standards set by the specifications. UDOT recently tested …

Synergy Of The Developed 6d Bim Framework And Conception Of The Nd Bim Framework And Nd Bim Process Ontology, Shawn Edward O'Keeffe

Dissertations

The author developed a unified nD framework and process ontology for Building Information Modeling (BIM). The research includes a framework developed for 6D BIM, nD BIM, and nD ontology that defines the domain and sub-domain constructs for future nD BIM dimensions. The nD ontology defines the relationships of kinds within any new proposed dimensional domain for BIM. The developed nD BIM framework and ontology takes into account the current 2D-5D BIM dimensions. There is a synergy between the 6D and nD framework that allows the nD framework and ontology to be utilized as a unified template for future dimensional development. …

A Case Study Of Zero Energy Home Built For Solar Decathlon Competition 2013, Sanjib Mulepati

UNLV Theses, Dissertations, Professional Papers, and Capstones

Energy consumption in residential homes has been a subject of research related to sustainability. Reduction in the consumption of energy is a goal of sustainable construction. The Department of Energy (DOE) started a Solar Decathlon competition in 2002 in which the students from different universities around the globe build an energy efficient and affordable home suitable for their climate and location. The main goal of this competition is to select the best home that is designed and built in a sustainable way. In this study, the home designed and constructed for participation in the competition by the students at University …

Protective Construction With Reinforced Earth, Christopher Tuan

Christopher Y. Tuan

The objective of this research is to develop a simple analytical method that characterizes plane shock wave propagation through reinforced earth and the dynamic interaction with modular retaining wall panels. The shock wave was initiated as a velocity boundary condition. The exact solution was obtained by the Laplace transform method. A step-by-step design procedure based on the "limit state" concept is proposed. Because of the impulsive nature of ground shock. the maximum response of the wall panel and reinforced soil system depends mainly on the capacity and rate of energy absorption and dissipation of the system. Therefore, the connection between …

Curved, Precast, Pretensioned Concrete I-Girder Bridges, Wilast Amorn, Christopher Y. Tuan, Maher K. Tadros

Christopher Y. Tuan

Modern highway construction frequently requires bridges with horizontally curved alignments. Such bridges can be created by superimposing a curved deck slab onto straight girders or by splicing segmental straight girders on the chords of a curved roadway. Of these two methods, a curved superstructure usually results in simpler construction and better appearance.

An Analysis Of Safety Culture & Safety Training: Comparing The Impact Of Union, Non-Union, And Right To Work Construction Venues, Harry Miller Csp, Tara Hill, Kris Mason, John S. Gaal Edd

Online Journal for Workforce Education and Development

The construction industry is one of the most dangerous sectors of the US economy. As such, the safety attitudes and climate within small (residential) contracting firms may play a role in providing a safe culture and working environment. The intent of this practitioner-based research study is to compare and determine if there is a difference in safety practices—based on documented field inspections and their related original number of violations observed by OSHA—between union residential carpentry contractors in the St. Louis area and:

1) non-union residential carpentry contractors in the St. Louis area;

2) non-union residential carpentry contractors across Missouri; and …

Tools For Applying Constructability Concepts To Project Development (Design), Nikiforos Stamatiadis, Paul Goodrum, Emily Shocklee, Roy Sturgill, Chen Wang

Kentucky Transportation Center Research Report

The purpose of this report is to document the activities of Phases I and II of the research effort and present the findings of the work accomplished. Phase I developed the Constructability Review Database for the Kentucky Transportation Cabinet and Phase II conducted a benefit analysis of the constructability review process. The database provides the basis for entry and collection of constructability reviews and allows for the identification of trends leading to potential improvements of the process. The database can be used to summarize activities, generate reports for a project, and be capable of quantifying the benefits from the process. …

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction News (2011-2022)

• Dr. Mike Jackson to Chair New Department of Civil Engineering and Construction Management (CECM)

Effects Of Hinged Dowel System On The Performance Of Concrete Pavement Joints, Alireza Zeinali, Kamyar C. Mahboub, Herbert F. Southgate

Civil Engineering Faculty Publications

Concrete joint failure is a major distress mode in rigid pavements. Improving the joint performance in concrete pavements could yield substantial savings in terms of reduced maintenance and rehabilitation costs. The newly developed Hinged Dowel System (HDS) is a means for transferring loads across the concrete pavement joints. The HDS was patented as a new invention by the United States Patent and Trademark Office, and it is envisioned that it could significantly reduce the potential for joint failure in concrete pavements. The HDS assembly comprises a number of dowel bars and a collective hinge provided at the mid-length of the …

Developing A Model To Enhance Labor Productivity Using Bridge Construction Benchmark Data, Seonghoon Kim, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

The Labor Working Status Monitoring (LWSM) Model that incorporates the WRITE and the industry benchmark data was developed through the five steps to enhance labor productivity in bridge construction operations. The first step of the development process was to conduct a literature review, followed by the second step which was to develop the WRITE. During the development, the authors identified the necessary hardware and software for the WRITE and outlined a schematic to show the connection of major hardware components. The third step was to develop the LWSM Model for monitoring the on-site construction labor working status by comparing data …

Developing Seismic Performance Factors For Prefabricated Bamboo Walls In Comparison To Conventional Timber Shear Walls, David Steenson, Davin Chan

Civil, Environmental and Sustainable Engineering Senior Theses

In order to address the issue of rising demand in resources from providing a growing population with housing, a team of professors and undergraduate students worked to study bamboo's possible utility as a structural element. This team proposed the use of bamboo as a substitute for timber in conventional light frame construction, specifically in the form of bamboo shear walls, which resist lateral loads such as those applied by earthquakes and winds. In order to demonstrate the adequacy of these proposed bamboo walls as a substitute to the control softwood walls, the team used the document FEMA P-795 to develop …

Design, Construction, And Evaluation Of A Portable Reusable Plastic Container Dumper, Kevin J. Lau

BioResource and Agricultural Engineering

This senior project discusses the design, construction, and evaluation of a portable RPC (Reusable Plastic Container) dumper. This RPC dumper is one piece of a citrus processing system to package citrus. Bee Sweet currently utilizes man power in order to dump its RPCs whereas this design will decrease the amount of man power needed to dump RPCs during high workloads.

The goal of this project was to design, construct, and test a custom fabricated RPC dumper that will decrease the number of people needed to dump RPCs and also the amount of damage on the oranges when being dumped from …

Analysis And Interpretation Of The 2013 Wku Steel Bridge Competition, Dylan H. Ward

Mahurin Honors College Capstone Experience/Thesis Projects

This research centers on building a working steel bridge that can hold over 2500 pounds, while deflecting no more than 1.5 inches. Weighing less than 150 pounds, the bridge was designed by inputting models into programs such as SAP and Visual Analysis, and adding the required load effects. Creating such a bridge involves various disciplines such as fabrication, communication, engineering, computer science, and economics. This presentation will address the design procedure, the building process, and the challenges faced by the team. This experience has allowed the bridge team to see what it takes to finish a project from start to …

Control Charts As A Productivity Improvement Tool In Construction, Jospeh Hubert Ault

Purdue Polytechnic Masters Theses

This study examined the use of individuals control charts to facilitate the productivity improvement of repetitive construction processes. Cycles times for excavation, forming, and reinforcing processes were observed using stratified random sampling during the construction of six residential home foundations. The cycle time information was plotted on control charts followed by an intervention, with the applicable crew members and management, to analyze the charts and propose solutions to any problems identified. Following the intervention, more samples were collected for comparison to the baseline observations collected before the intervention. The mean cycle times were compared before and after the interventions using …

Cyber-Adaptive Physical Systems For Automated Construction Progress Monitoring And Asset Tracking, Syed Hammad Rasheed

Masters Theses

Despite the benefits of building information models as a means of communication, collaboration and integration in construction projects, their use is often limited to the design and tendering/bidding stage. Potential of building information models lies in its implementation during construction, operations and maintenance phases of a facility’s lifecycle. Tight Integration of building information model and physical facility by means of computational resources is required to achieve this potential such that changes in one environment are automatically reflected in the other. This is termed a cyber-adaptive physical systems approach. This research investigates the applicability of a cyber-adaptive physical systems approach in …

Highly Processable Method For The Construction Of Miniature Conducting Polymer Moisture Sensors, Scott T. Mcgovern, Geoffrey M. Spinks, G G. Wallace

Gordon Wallace

A polymer blend incorporating polyaniline (PAn) was used as a sensing medium in the construction of a resistance based humidity sensor. Aniline monomer was polymerised to PAn emeraldine salt (ES) in the presence of poly (butyl acrylate-co-vinyl acetate) and the processable blend was developed by redissolving 1-2 w/w% of the resulting sensing polymer residue in dichloromethane (DCM). Some of this residue was washed in ammonia solution to de-dope the PAn to emeraldine base (EB) to act as a protective layer on the surface of the sensing polymer. This residue was then washed with distilled water until a neutral pH was …

Bringing To Life The World’S Tallest Structure, Jonathan Weigand

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

Intended as the centerpiece of constructional developments in Dubai, the Burj Khalifa now stands as the tallest building ever constructed. The uniquely designed foundation consists of a concrete raft supported by a cast-in-place pile system protected by waterproofing membrane to inhibit corrosion. The structural design integrates high-performance reinforced concrete and steel and incorporates an engineered “Y” shape that limits the lateral wind pressure on the building. Engineers applied the latest advancements in high-rise technology to develop an optimized construction plan that consisted of segmented tasks that promoted the staff to work at a quick yet manageable pace. This article details …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Rail Track Infrastructure For Enhanced Speed - Analysis Design And Construction Challenges, Buddhima Indraratna, Sanjay Shrawan Nimbalkar, Jayan Sylaja J S Vinod

Faculty of Engineering and Information Sciences - Papers: Part A

Rail is one of the largest transportation modes offering freight and passenger traffic in rapidly developing nations, including India. Conscious efforts to improve productivity, modernization and technology upgrading have led to an impressive growth in railways. Large-scale physical modeling, sophisticated numerical modeling and full-scale field monitoring often provide significant knowledge to better understand track performance and to extend the current state-of-the-art in design. A series of large-scale laboratory tests were conducted to establish relationships between (i) ballast breakage and train speed, (ii) ballast fouling and strength and (iii) interface strength and geogrids. Comprehensive field trials were carried out on instrumented …

Environmental Impact Assessment Of Post Tensioned And Reinforced Concrete Slab Construction, D Miller, J H. Doh, H Guan, M Mulvey, S Fragomeni, T Mccarthy, T Peters

Faculty of Engineering and Information Sciences - Papers: Part A

In Australia, approximately 30 million tonnes of finished building products are produced each year, with over 56% of this quantity, by mass, being attributed to concrete and a further 6%, steel, highlighting the importance of maximising design efficiencies. The cement industry has been reported responsible for 5% of global carbon dioxide emissions while the construction, operation and maintenance of buildings are estimated to account for 50% of all energy usage and more than 50% of all anthropogenic greenhouse gas (GHG) emissions globally. This research determines some environmental advantages achievable through application of alternate concrete slab construction methods for a typical …