Engineering Commons^™

Discrete Element Modeling To Predict Muckpile Profiles From Cast Blasting, Russell Lamont

Theses and Dissertations--Mining Engineering

Movement of overburden or ore from one location to another may be considered the primary physical process of mining. The means by which it is transported is then of primary concern both to economic production and cost control. The geologic characteristics of some mineral deposits, especially coal and phosphates, lend themselves to overburden transport by means of cast blasting, which when efficiently designed has proven itself to be a cheaper method than traditional truck/shovel, dragline, or even dozer push transport. Simultaneously, this movement of a significant portion of overburden using explosives may enable an operation to increase mineral production, as …

Prediction Of Blast-Induced Ground Vibrations: A Comparison Between Empirical And Artificial-Neural-Network Approaches, Luis F. Velasquez

Theses and Dissertations--Mining Engineering

Ground vibrations are a critical factor in the rock blasting process. The instantaneous load application exerted by the gas pressure during the detonation process acts on the blasthole walls creating dynamic stresses in the adjacent rock. This triggers different sorts of stress waves, mainly divided into two categories: body and surface waves. The first comprises the P and the S waves, while the second comprises Rayleigh waves. These waves spread concentrically starting at the blast location and move along the ground surface and its interior, being attenuated as they reach further distances.

In most cases, and accepting the hypothesis that …

Effects Of Downwash When Measuring Gas Concentration With Uav-Mounted Gas Sensors, Jacob Lane Brinkman

Doctoral Dissertations

"This research concludes that the downwash region of a rotary-wing unmanned aerial vehicle (UAV) does not produce pressure variations substantial enough to cause significant changes in density-based gas concentration measurements. US regulations evaluate gas concentration as a function of gas density, and accurate concentration measurements are critical for protecting health and safety, which means evaluation of actual downwash effects on measured gas concentration is essential.

During experimentation, the UAV was fixed to a stand in a sealed chamber filled with NOx (NO and NO₂) of constant concentration. The UAV rotors ran at hovering speeds, and gas concentrations were …

The Effect Of Delay And Sequence On Blasting Fragmentation Results, Tristan Worsey

Theses and Dissertations--Mining Engineering

Blasters use the delay between charges and the firing sequence of the explosive charges to help reduce vibrations and achieve the desired fragmentation. Although delay and sequence are recognized as very important for vibrations and fragmentation, only vibration models consider timing as a variable in the prediction tool, without any known model for fragmentation prediction based on the delay sequence. Of the few fragmentation models available, very few take delay into account and do not give guidance on row delay and/or sequence selections. With the invention of electronic detonators in 1984, there are new avenues to explore with sequence and …

Seepage-Coupled Finite Element Analysis Of Stress Driven Rock Slope Failures For Bothnatural And Induced Failures, Thomas Becket Anyintuo

USF Tampa Graduate Theses and Dissertations

Rock slope failures leading to rock falls and rock slides are caused by a multitude of factors, including seismic activity, weathering, frost wedging, groundwater and thermal stressing. Although these causes are generally attributed as separate causes, some of them will often act together to cause rock slope failures. In this work, two of the above factors, seepage of water through cracks and crack propagation due to the after effects of blasting are considered. Their combined impact on the development of rock falls and rock slides is modeled on ANSYS workbench using the Bingham Canyon mine slope failure of 2013 as …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

Investigating Blast Fume Propagation, Concentration And Clearance In Underground Mines Using Computational Fluid Dynamics (Cfd), Raymond Ninnang Tiile

Doctoral Dissertations

"Blasting activities using standard industry explosives is an essential component of underground hard rock mining operations. Blasting operations result in the release of noxious gases, presenting both safety and productivity threats. Overestimation of post-blast re-entry time results in production losses, while underestimation leads to injuries and fatalities. Research shows that most underground mines simply standardize post-blast re-entry times based on experiences and observations. Few underground mines use theoretical methods for calculating post-blast re-entry time. These theoretical methods, however, are unable to account for the variations in the blasting conditions. Literature review shows that: (i) there is currently no means of …

The Effects Of Underground Blasting On Nearby Pre-Existing Structures, Logan Connolly

Graduate Theses & Non-Theses

Butte, Montana holds a prestigious place in the history of mining, deemed “The Richest Hill on Earth,” containing a plethora of underground mines. The Orphan Boy/Orphan Girl underground mines, on the western side of Butte, operated from 1895-1956 producing zinc, lead, silver, and manganese. Today, the Orphan Boy mine is part of Montana Tech’s Underground Mine Education Center (UMEC) and the Orphan Girl mine houses the World Museum of Mining. Underground development in the Orphan Boy mine continues to progress as students from Montana Tech receive hands-on underground training; in addition, the UMEC is a multi-disciplinary research facility. Repeated underground …

Optimization Of Drilling And Blasting Practices At A Western Us Open Pit Copper Mine, Joel Gadikor

Graduate Theses & Non-Theses

The mining process begins with drilling and blasting activities. The efficiency of blasting affects all downstream operations such as loading, hauling, crushing and milling. Therefore drilling and blasting activities should be designed to ensure that designed parameters produce the desired fragmentation. The Kuz-Ram model is a fragmentation prediction model and is widely used for predicting the fragmentation distribution from blasting in the mining industry. This research evaluates the performance of the Kuz-Ram and Modified Kuz-Ram models to determine the most accurate models applicable to a Western US open pit copper mine’s fragmentation data. The performance assessment was done using the …

The Influence Of Caprock On Blast Fragmentation Distribution, Matthew Kurtis Coy

Doctoral Dissertations

"This dissertation describes the development of a small-scale model of a caprock-laden quarry blast and discusses the results from that testing. The purpose of this testing was to provide insight into the reasons for poor caprock breakage during blasting.

Small-scale test blocks were poured using a weak mortar mix to represent a limestone formation at a small scale. A cold joint was created in the upper portion of the test specimens to represent the bedding plane that separates caprock and substrate layers in a caprock-laden limestone bench. The scale-model test blocks were blasted using detonating cord. The primary configuration for …

Pore Pressure Measurement Instrumentation Response To Blasting, Kylie M. Larson-Robl

Theses and Dissertations--Mining Engineering

Coal mine impoundment failures have been well documented to occur due to an increase in excess pore pressure from sustained monotonic loads. Very few failures have ever occurred from dynamic loading events, such as earthquakes, and research has been done regarding the stability of these impoundment structures under such natural seismic loading events. To date no failures or damage have been reported from dynamic loading events caused by near-by production blasting, however little research has been done considering these conditions. Taking into account that current environmental restrictions oblige to increase the capacity of coal impoundments, thus increasing the hazard of …

Open Pit Mining Operations, James A. Simon

Bachelors Theses and Reports, 1928 - 1970

This report on open pit mining operations will discuss: the history of open pit mining, factors important in the selection of open pit mining and in the development of an open pit, and the various mining and operational methods used in this type of an operation. Stripping coal mining operations will be discussed but the majority of the report will be on open pit metal mines.