Engineering Commons^™

Specific Heat And Magnetic Relaxation Analysis Of Mgb2 Bulk Samples With And Without Additives, C. Senatore, P. Lezza, R. Lortz, Olga V. Shcherbakova, Wai Kong Yeoh, S. X. Dou, R. Flukiger

Faculty of Engineering - Papers (Archive)

The effects of SiC and Carbon doping on the superconducting properties of MgB2 polycrystalline samples have been analysed by means of specific heat and magnetic relaxation measurements. It is known that the addition of nanometric powders of SiC and C leads to the enhancement of Birr and Jc. However, the underlying physical mechanism is not completely understood. Magnetic relaxation measurements did not show detectable effects of both the additions on the pinning properties of MgB2. It follows that doping acts mainly introducing disorder into the superconductor and thus raising Bc2. In the case of MgB1.9C0.1, specific heat measurements show that …

An Examination Of Internet Effectiveness For Non-Work Activities, Pruthikrai Mahatanankoon, Tim Klaus, H. Joseph Wen

Journal of International Technology and Information Management

The Internet is frequently used for non-work activities. When used for these purposes, the effectiveness of the Internet in accomplishing these leisure activities becomes an important consideration. Research literature has remained relatively silent in regards to the examination of accomplishing non-work tasks through the Internet. This study uses Davis’ Technology Acceptance Model (TAM) as a basis to predict different types of common user web activities—entertainment, communicating, and information searching. Using Structured Equation Modeling, this paper examines the effectiveness of the Internet in accomplishing non-work activities. In this study, the overall analysis of the survey data suggests that perceived ease of …

The Role Of Quantitative Analysis In The Information Security Systems Development Lifecycle, Stephen R. Rosenkranz, Michael E. Busing, Faye P. Teer, Karen A. Forcht

Journal of International Technology and Information Management

Today’s numerous Quantitative Analysis (QA) tools have been successfully utilized to solve business problems in diverse applications. However, the application of QA tools in solving information security problems has been sparse. Devising the means and ways to use QA tools in resolving industry-wide security problems has the potential to yield enormous global economic benefit. The purpose of this paper is to explore the use of QA tools as a means of improving the processes involved in the Information Security Systems Development Lifecycle (SecSDL). Information security professionals use the SecSDL as a guide for formulating a comprehensive information security program. The …

Post Earthquake Investigation Field Manual For The State Of Kentucky, Ann G. Sardo, Thomas E. Sardo, Issam E. Harik

Kentucky Transportation Center Research Report

The rapid assessment of a bridge structure’s safety and functionality is an essential component to restoring vital lifeline routes after a major earthquake. Appropriate posting categories are used to assure the safety of the traveling public. The objective of this manual is to provide a rapid and efficient method of inspecting bridge structures after an earthquake. The primary users of this manual are intended to be the initial Kentucky Transportation Cabinet personnel who will initially reach the bridge sites. It is recognized that such first-line personnel will possess a variety of backgrounds and, therefore, a systematic method of evaluating the …

An Analysis Of Indicator Organism Suitability For Lower James And York Rivers, Rhonda Ashonti Ford

Civil & Environmental Engineering Theses & Dissertations

The primary objectives of this thesis are (1) determine if the proper indicator organism is being utilized to determine the bacterial water quality in the State of Virginia. (2) If other environmental factors can predict the bacterial water quality. The current indicator organism of choice for bacterial water quality of waters in the State of Virginia is enterococci, for estuarine and brackish waters. E. coli is the indicator organism of choice for fresh waters in Virginia.

The study concluded (1) Enterococci are the best indicator organism for beaches located in the Hampton Roads Harbor and the Lower James River. (2) …

Anywhere, Anytime, Anysize, Any Signal: Scalable Remote Information Sensing And Communication Systems, George Markowsky

University of Maine Office of Research Administration: Grant Reports

Several recent meetings have highlighted the growing interest in the biological, ecological, environmental, and other research communities in the development and deployment of large distributed systems for information collection, aggregation, analysis, simulation, predictive modeling and realtime analysis within their respective disciplines. Likewise, recent events have caused concern and raised interest in the need for similar systems in the context of homeland security. It seems apparent that a structured discussion of the needs for these systems could create opportunities for synergistic efficiencies between the various user communities. To date, however, no such discussions have been held among these differing user communities, …

Cee3030 - Uncertainty In Engineering Analysis, Spring 2006, Gilberto E. Urroz

Civil and Environmental Engineering - OCW

This course on uncertainty in engineering analysis can also be referred to as probability and statistics for engineers. In particular, we will deal with the applications of probability and statistics to problems related to civil and environmental engineering. Note: Technical Requirements, Maple 10 by Maplesoft

Discrete Cosine Transform Based Shift Estimation For Fringe Pattern Profilometry Using Generalized Analysis Model, Jose F. Chicharo, Jiangtao Xi, Yingsong Hu, Zongkai Yang, Enbang Li

Faculty of Engineering - Papers (Archive)

This paper presents a new analysis algorithm to carry out profile measure- ment with low computational complexity and less noise-sensitivity. Firstly, a discrete cosine transform (DCT) based representation method is introduced to express the height distribution of the three-dimensional surface. Then, a novel shift estimation algorithm, called DCT based shift estimation (DCT-SE) is presented to reconstruct three-dimensional object surfaces by using the proposed expression and the generalized analysis model. The advantage of DCT-SE is that without loss of measurement precise it provides lower computational complexity to implement three-dimensional reconstruction from distorted fringe patterns and at the same time survives from …

Classification And Statistical Analysis Of Skin Cancer Terahertz Spectra, Matthew J. Berryman, T J. Rainsford, D Abbott

Faculty of Engineering - Papers (Archive)

We are developing computational, statistical pattern recognition tools that allow for the separation of various THz spectral data obtained from normal, pre-cancerous and cancerous tissue.

General Methodology For Analysis And Modeling Of Trust Relationships In Distributed Computing, Weiliang Zhao, Vijay Varadharajan, George Bryan

Faculty of Engineering - Papers (Archive)

In this paper, we discuss a general methodology for analysis and modeling of trust relationships in distributed computing. We discuss the classification of trust relationships, categorize trust relationships into two layers and provide a hierarchy of trust relationships based on a formal definition of trust relationship. We provide guidelines for the analysis and modeling of trust relationships. We review operations on trust relationships and relative types of trust relationships in our previous work. We provide a set of definitions for the properties of direction and symmetry of trust relationships. In order to analyze and model the scope and diversity of …

Gait Analysis Of Low-Cost Flexible-Shank Transtibial Prostheses, Winson Lee, Ming Zhang, Peggy Chan, David A. Boone

Faculty of Engineering and Information Sciences - Papers: Part A

The latest lower-limb prosthetic designs have been incorporated with dynamic elastic response (DER) components to enhance prosthesis flexibility, which are suggested to be beneficial to gait. Although DER prosthetic. feet are preferred by most transtibial amputees and their benefits to gait are supported by some biomechanical studies, many are still utilizing the simple conventional solid ankle cushioned heel (SACH) designs because of the lower cost. The monolimb, a transtibial prosthesis with the socket and the shank molded from a single piece of thermoplastic material, perhaps is an alternative to DER feet for providing flexibility at the shank. In addition to …

Explicit Dynamic Fem Analysis Of Multipass Vertical-Horizontal Rolling, Hai-Liang Yu, Xiang-Hua Liu, Xian-Ming Zhao, Di Wu, Y Kusaba

Faculty of Engineering and Information Sciences - Papers: Part A

Three passes of plate rolling during vertical-horizontal rolling process are simulated with explicit dynamic finite element method and updating geometric method. The equivalent strain and stress fields, and shape change at the head and tail of slab during rolling are obtained. The calculated result of the shape at the head and tail of slab is in good agreement with the measured one. The explicit dynamic finite element method and updating geometric method can be used effectively to analyze the multipass vertical-horizontal (V-H) rolling process. © 2006 Central Iron and Steel Research Institute.

Cfd Analysis Of Impinging Axisymmetric Turbulent Fountains, Ajit R. Godbole, Paul Cooper, John Norrish, Gary R Hunt

Faculty of Engineering - Papers (Archive)

No abstract provided.

Assessment Of Spatial Analysis Techniques For Estimating Impervious Cover, Steven Roso, Michael J. Boyd, Laurie A. Chisholm

Faculty of Engineering - Papers (Archive)

Impervious cover proportion is recognised as an important parameter in hydrologic modelling. Recent advances in the spatial sciences provide new capabilities for estimation of this value. This paper describes an assessment of seven estimation techniques, including human and computer based methods requiring a range of different input data and skill levels. In order to quantify the value of any gain in accuracy, the results from each method were applied to a real catchment using event based (WBNM) and continuous simulation (MUSIC) hydrologic models. The results showed that use of high resolution satellite imagery enabled the most accurate measurements of impervious …

Gene Network Analysis And Design, Matthew J. Berryman, Andrew Allison, Derek Abbott

Faculty of Engineering - Papers (Archive)

Gene networks are composed of many different interacting genes and gene products (RNAs and proteins). They can be thought of as switching regions in n-dimensional space or as mass-balanced signaling networks. Both approaches allow for describing gene networks with the limited quantitative or even qualitative data available. We show how these approaches can be used in modeling the apoptosis gene network that has a vital role in tumor development. The open question is whether engineering changes to this network could be used as a possible cancer treatment.

Analysis And Modelling Of Trust In Distributed Information Systems, Weiliang Zhao, Vijay Varadharajan, George Bryan

Faculty of Engineering - Papers (Archive)

In this paper, we consider the analysis and modelling of trust in distributed information systems.We review the relations of trust relationships in our previous work.We discuss trust layers and hierarchy based on formal definition of trust relationship.We provide a set of definitions to describe the properties of trust direction and trust symmetry under our taxonomy framework.In order to analyze and model the scope and diversity of trust relationship, we define trust scope label under our taxonomy framework.We provide some example scenarios to illustrate the proposed definitions about properties of trust relationship. The proposed definitions are new elements of the taxonomy …

Analysis Of Oxidation And Surface Characteristics In Hot Strip Rolling, Zhengyi Jiang, Weihua Sun, Jianning Tang, Dongbin Wei, A K. Tieu

Faculty of Engineering - Papers (Archive)

Deformation characteristics of the oxide scale in hot strip mill have not been quantified before and the principle of the effect of oxide scale deformation in the roll bite on strip surface roughness has not yet been revealed. In this paper, analysis of the thin secondary oxide scale formed in hot metal rolling and its surface roughness micro deformation is carried out by experiments and finite element analysis. Simulation results are compared with the measured values, which show that they are in close agreement. Surface roughness transfer during hot metal rolling is also discussed.

Work-Per-Cycle Analysis For Electromechanical Actuators, Geoffrey M. Spinks, Van T. Truong

Faculty of Engineering - Papers (Archive)

Work-per-cycle calculations have been demonstrated for two modes of actuation behaviour: (1) working against a dead weight (isotonic actuation) and (2) working against a restoring spring. Importantly, the influence of the electrical stimulus on the elastic modulus of the actuator material has been included in the analysis. The change in elastic modulus is shown to significantly influence the actuator strain and work-per-cycle. The maximum work-per-cycle for each case has been calculated. Comparison of different materials has been made on the basis of our theoretical prediction and other published models. Work-per-cycle is shown to be significantly affected by the mode of …

International Space Station Remote Sensing Pointing Analysis, Craig Jacobson

Electronic Theses and Dissertations

This paper analyzes the geometric and disturbance aspects of utilizing the International Space Station for remote sensing of earth targets. The proposed instrument is SHORE (Station High-Sensitivity Ocean Research Experiment), a multi-band optical spectrometer with 15 m pixel resolution. The analysis investigates the contribution of the error effects to the quality of data collected by the instrument. The analysis begins with the discussion of the coordinate systems involved and then conversion from the target coordinate system to the instrument coordinate system. Next the geometry of remote observations from the Space Station is investigated including the effects of the instrument location …

Bayesian Analysis For Penalized Spline Regression Using Winbugs, Ciprian Crainiceanu, David Ruppert, M. P. Wand

Faculty of Engineering and Information Sciences - Papers: Part A

Penalized splines can be viewed as BLUPs in a mixed model framework, which allows the use of mixed model software for smoothing. Thus, software originally developed for Bayesian analysis of mixed models can be used for penalized spline regression. Bayesian inference for nonparametric models enjoys the flexibility of nonparametric models and the exact inference provided by the Bayesian inferential machinery. This paper provides a simple, yet comprehensive, set of programs for the implementation of nonparametric Bayesian analysis in WinBUGS. Good mixing properties of the MCMC chains are obtained by using low-rank thin-plate splines, while simulation times per iteration are reduced …

Fem Analysis Of The Head Bending In Narrow Strip Hot Rolling, Limei Yang, Zhengyi Jiang, A. K. Tieu

Faculty of Engineering - Papers (Archive)

Head bending is a problem in narrow strip hot rolling, which causes a difficulty for strip to enter the next rolling pass of the tandem mills and affects the quality of products. A 2D FEM coupled thermal-stress analysis was employed to simulate the rolling process. The effects of the temperature difference, friction coefficient, reduction and the rolling speed on the head bending are discussed in the paper. Simulation results are in agreement with the measured values.

3d Finite Element Analysis Of Surface Roughness And Friction In Hot Strip Rolling, Zhengyi Jiang, A. K. Tieu

Faculty of Engineering - Papers (Archive)

Surface roughness of oxide scale and strip in hot strip rolling has a significant influence on the friction and lubrication conditions. In this paper, the authors present the measured surface roughness of oxide scale and strip by Atomic Force Microscope (AFM) and Surface Profilometer respectively for hot rolled strip on a Hille 100 experimental rolling mill. Based on the friction coefficient determined through a sensor roll on the rolling mill, a 3D rigid visco-plastic finite element simulation was carried out, and the relationship between the surface roughness and friction coefficient was investigated. Results show that the lubrication in hot strip …

Development Of A System Of Systems Engineering Method, Ji Hyon Mun, Morgan Henrie, Yaneth Correa, Charles Keating, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

Systems engineers have been facing challenges with the design and analysis of multiple complex systems. System of Systems Engineering has emerged to assist in this challenge with the systemic analysis, design, and transformation of complex metasystems. This paper outlines a proposed method to overcome these challenges, which is grounded in System of Systems Engineering principles and methodology. An overview of System of Systems Engineering will be provided for understanding of its significance and the attempt to complement Systems Engineering efforts in dealing with the aforementioned challenges. Finally, discussion on the proposed method, with respect to complex system analysis, is provided.

A Cad-Centric Approach To Cfd Analysis With Discrete Features, Matthew Lee King

Theses and Dissertations

During the conceptual design stage several concepts are generated, and a few are selected for detailed analyses. CAD models from conceptual design often follow the "over-the-wall" approach for downstream analyses such as FEA, CFD, heat transfer, and vibrations. A CAD-centric approach will be applied to the CAD-to-CFD process to help industry in an ongoing quest to shorten the design cycle time. The CAD-centric approach consists of using the CAD model as a source of data for downstream applications such as mesh generation, and CFD setup. The CAD model used in the CAD-centric approach contains the geometry to be analyzed and …

Analysis And Design Of Double-Sided High-Rise Steel Pallet Rack Frames, Lip H. Teh, Gregory J. Hancock, Murray J. Clarke

Faculty of Engineering - Papers (Archive)

In routine design of steel storage rack frames, it is far more common to perform two dimensional (2D) rather than three dimensional (3D) linear buckling analyses. In this paper, it is demonstrated that the global buckling behavior of high-rise steel storage rack frames may not be revealed by 2D buckling analyses as 3D interaction modes are involved. It is shown that the monosymmetric upright columns of a high-rise rack frame fail in a flexural–torsional mode due to the shear-center eccentricity of the sections, and that the 3D frame buckling analysis is more reliable in determining the critical members of a …

Beam Element Verification For 3d Elastic Steel Frame Analysis, Lip H. Teh

Faculty of Engineering - Papers (Archive)

The paper describes the attributes that should be possessed by a benchmark example for verifying the beam elements used to carry out 3D linear buckling analysis and 3D second-order elastic analysis of steel frames. Based on the attributes described, the paper proposes a suite of benchmark examples selected from the literature. The necessary features of a beam element required to pass the proposed benchmark problems are given, and beam elements that possess these features are cited. The paper also explains the merits of linear buckling analysis examples, and provides a commentary on two well-known examples.

Finite-Element Analysis To Determine Effect Of Monolimb Flexibility On Structural Strength And Interaction Between Residual Limb And Prosthetic Socket, Winson Lee, Ming Zhang, David A. Boone, Bill Contoyannis

Faculty of Engineering and Information Sciences - Papers: Part A

Monolimb refers to a kind of transtibial prostheses having the socket and shank molded into one piece of thermoplastic material. One of its characteristics is that the shank is made of a material that can deform during walking, which can simulate ankle joint motion to some extent. Changes in shank geometry can alter the stress distribution within the monolimb and at the residual limb-socket interface and, respectively, affect the deformability and structural integrity of the prosthesis and comfort perceived by amputees. This paper describes the development of a finite-element model for the study of the structural behavior of monolimbs with …

Development And Analysis Of A Novel Vertical Axis Wind Turbine, Paul Cooper, Oliver C. Kennedy

Faculty of Engineering - Papers (Archive)

This paper describes the development of a novel vertical axis wind turbine used for teaching and research purposes. The device is designed to operate at low tip speed ratios and features blades that are symmetric about the mid-chord plane. The blades are actively pitched by means of a mechanical system so that the chord of each blade rotates by 180º for every revolution of the main rotor. One of the attractions of the device is that it is self-starting and produces relatively high torque. A multiple streamtube analysis of the device has been developed and numerical predictions for the performance …

Distributed Polarizability Analysis For Para-Nitroaniline And Meta-Nitroaniline: Functional Group And Charge-Transfer Contributions, Marc In Het Panhuis, R W. Munn, P L A Popelier

Australian Institute for Innovative Materials - Papers

Topological partitioning of electronic properties is used to investigate the polarizability of para-nitroaniline and meta-nitroaniline. The distributed polarizabilities for atoms are combined into total local or generalized distributed contributions for the amino, ring, and nitro functional groups; generalized distributed group contributions have not been calculated before. The local group contributions are transferable between the two molecules only when charge transfer is suppressed, but the generalized distributed contributions prove surprisingly similar in the two molecules, apparently because they treat charge-transfer contributions explicitly.

Analysis And Modeling Of Polysilicon Critical Dimensions, Jasper P. Munson

Journal of the Microelectronic Engineering Conference

The objective of the project was to evaluate polysilicon CD etch bias as it was affected by etch time, measurement feature within the exposure field, and the product being measured. Characterization of the trends has generated a summarizing model that uses etch time, measurement feature, and product type as significant factors in determining polysilicon CD etch bias. Etch time was found to be a continuous factor, while measurement site and product type were categorical. Measurement Site A was found to be independent of measurement Site B, independent of Site C, etc., as well as Product 1 was found independent of …