Engineering Commons^™

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

Mechanics Of Pure Bending And Eccentric Buckling In High-Strain Composite Structures, Jimesh D. Bhagatji, Oleksandr G. Kravchenko, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

To maximize the capabilities of nano- and micro-class satellites, which are limited by their size, weight, and power, advancements in deployable mechanisms with a high deployable surface area to packaging volume ratio are necessary. Without progress in understanding the mechanics of high-strain materials and structures, the development of compact deployable mechanisms for this class of satellites would be difficult. This paper presents fabrication, experimental testing, and progressive failure modeling to study the deformation of an ultra-thin composite beam. The research study examines the deformation modes of a post-deployed boom under repetitive pure bending loads using a four-point bending setup and …

Advancements And Challenges In Additively Manufactured Functionally Graded Materials: A Comprehensive Review, Suhas Alkunte, Ismail Fidan, Vivekanand Naikwadi, Shamil Gudavasov, Mohammad Alshaikh Ali, Mushfig Mahmudov, Seymur Hasanov, Muralimohan Cheepu

Engineering Technology Faculty Publications

This paper thoroughly examines the advancements and challenges in the field of additively manufactured Functionally Graded Materials (FGMs). It delves into conceptual approaches for FGM design, various manufacturing techniques, and the materials employed in their fabrication using additive manufacturing (AM) technologies. This paper explores the applications of FGMs in diverse fields, including structural engineering, automotive, biomedical engineering, soft robotics, electronics, 4D printing, and metamaterials. Critical issues and challenges associated with FGMs are meticulously analyzed, addressing concerns related to production and performance. Moreover, this paper forecasts future trends in FGM development, highlighting potential impacts on diverse industries. The concluding section summarizes …

Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti

Technical science and innovation

Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …

Numerical Study Of The Time-Periodic Electroosmotic Flow Of Viscoelastic Fluid Through A Short Constriction Microchannel, Jianyu Ji, Shizhi Qian, Armani Marie Parker, Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) is of utmost significance due to its numerous practical uses in controlling flow at micro/nanoscales. In the present study, the time-periodic EOF of a viscoelastic fluid is statistically analyzed using a short 10:1 constriction microfluidic channel joining two reservoirs on either side. The flow is modeled using the Oldroyd-B (OB) model and the Poisson-Boltzmann model. The EOF of a highly concentrated polyacrylamide (PAA) aqueous solution is investigated under the combined effects of an alternating current (AC) electric field and a direct current (DC) electric field. Power-law degradation is visible in the energy spectra of the velocity fluctuations …

Correlation Of And Development Of Procedure To Use A Resonant Plate With Mechanical Excitation For Shock Testing Small-To-Medium Size Spacecraft And Provide Aerospace Shock Analysis And Testing Guidelines, Monty Kennedy

Dissertations, Master's Theses and Master's Reports

In the aerospace industry it is known that performing shock analysis and testing on spacecraft is difficult to do mostly because shock loads create a very short duration shock wave transient that can have high acceleration peak levels (1,000-5,000 g) and wide frequency content (100-10,000 Hz). FE (finite-element) shock analysis is difficult because implicit linear FE software commonly used for most vibration analysis in aerospace does not account for shock wave propagation, reflection, and attenuation that occurs based upon the distance from the shock source at the base of the spacecraft and the attenuations that occurs through mechanical joints. Spacecraft …

Understanding The Nonlinear Dynamics Governing Vertical-Lift Vehicles With Variable-Speed, Fixed Rotors, Stephanie Vavra, Micah Busboom, Aleea Stanford, Keegan Moore

UNL Student Research Days Posters, Undergraduate

Problem: Traffic significantly limits travel in urban areas. • The NASA Urban Air Mobility Project is developing an air taxi as an alternative mean of transportation (Fig. 1).

Challenge: Operating rotors at different frequencies may cause the cabin to vibrate at high amplitudes. Such effects are currently unknown.

Objective: Understand the effect of variable speed rotors on passenger comfort.

From the reduced-order modeling simulations, it can be assumed that counteracting the rotor speed in-balances can reduce the displacement and vibrations experienced at the center of the wing. In other words, should a rotor not maintain its optimal operation speed, reducing …

Economic Test Results Of Experimental Spring Device, Husniddin D. Irisov, Alexander P. Kartoshkin

Technical science and innovation

The article conducts economic research on the development of resource-saving technologies in the artificial shedding of cotton leaves and new scientific and technical solutions for the formation of high-dispersion droplets of spraying equipment, including the technological operation of high-dispersion droplet-forming spraying devices for small-volume fan sprayers.The experimental spraying unit, equipped with advanced cultivators, was tested in the field under typical field conditions and optimal agro-technical terms for the agro-technical evaluation test area. During the study, test schemes were adopted to determine the performance of sprayers in the field, soil type, relief and microrelief, soil moisture and hardness were determined in …

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …

Thermal Conductivity Measuring Device, Kyle Saalfeld

All Undergraduate Projects

The thermal conductivity measuring device is used to measure thermal conductivity of solids, liquids, and food products. Thermal conductivity is a material property that determines the rate at which heat disperses through a material. This determines how well insulation works, what materials are used as heat sinks, refrigeration, and how thoroughly food is cooked. The device measures thermal conductivity by heating up a thermistor bead using a high magnitude current for a measured duration and allowing the given heat to disperse; meeting the goal of designing a device that can easily measure the conductivity. Additional requirements of this device include …

Fire Fighter Robot, Sultan Alhajrri

All Undergraduate Projects

The Fire Fighter Robot has been made in this project which can fight against the fire and that should be controllable over WiFi from the particular distance. The main objective of the design was that to fabricate the frame of the robot on which the whole top part of the robot can sit. The main constraint was that high-level skills were required for the implementation of some sections. The bottom part of the robot was first designed on the SOLIDWORK and Fusion360 software. the Whole dimensions were set for the bottom part so that the water tank, camera and the …

Analysis Of Pellet-Cladding Mechanical Interaction On U3si2 Fuel With A Multi-Layer Sic Cladding Using Bison, Ray A. Freeman

Theses and Dissertations

U3Si2 is currently being considered as a possible replacement for the current light water reactor fuel, UO2. U3Si2’s high melting temperature, high uranium density, and high thermal conductivity are favorable in accident conditions, such as a loss of coolant accident. Improved accident performance is further expected when paired with a SiC/SiC cladding, since it provides relatively high strength and a high oxidation resistance.

Modeling of U3Si2 and SiC/SiC in reactor is currently very important since much of their behavior is still unknown. By implementing models that describe the properties of U3Si2 and SiC/SiC into INL’s fuel performance code BISON, performance …

Dynamic Mechanical Analysis Piezoelectric Design, Letia Bass, Michaela N. Mccrae, Ethan W. Goodman, Joesph W. Mazur

Williams Honors College, Honors Research Projects

This project is a continuation into the design and implementation of a Dynamic Mechanical Analysis (DMA) device that will be used to conduct high frequency testing on tire tread compounds. The design requirements necessary were to design a device that will produce a target frequency of 10 kHz with a 0.05% strain, while being at room temperature. The 3-D model developed by the previous year’s students was improved upon and new parts were designed as well. The assemblies (most importantly the connector piece) were 3-D modeled using Creo Parametric and analyzed with COMSOL Multiphysics. A new design involving flexures was …

Design And Prototype Of Next Generation Nascar Brake Caliper, Jesse Crowder, John Knighton, Lenny Ports, Miranda Snyder

Capstone Design Expo Posters

Efficient braking is pivotal to the success of a NASCAR team. Braking occurs when the brake pedal is depressed, causing hydraulic pressure within the caliper housing and on the pistons, which forces the pistons to push the brake pads against the rotors reducing the vehicle’s speed due to the high friction between the pads and rotors. High performance brake calipers are arguably one of the most crucial components of a race car braking system. Short track brake calipers were designed to efficiently decelerate vehicles traveling upwards of one-hundred twenty miles per hour. This is an essential function of vehicles on …

Towards A Semantic Knowledge Management Framework For Laminated Composites, Vivek Premkumar

Masters Theses

The engineering of laminated composite structures is a complex task for design engineers and manufacturers, requiring significant management of manufacturing process and materials information. Ontologies are becoming increasingly commonplace for semantically representing knowledge in a formal manner that facilitates sharing of rich information between people and applications. Moreover, ontologies can support first-order logic and reasoning by rule engines that enhance automation. To support the engineering of laminated composite structures, this work developed a novel Semantic LAminated Composites Knowledge management System (SLACKS) that is based on a suite of ontologies for laminated composites materials and design for manufacturing (DFM) and their …

Creation And Analysis Of Checklists To Improve Raquet Stringing Performance In Tennis Warehouse, Alston S. Nguyen

Industrial and Manufacturing Engineering

Tennis Warehouse has a need to increase the supply of strung racquets and man hours to complete these strung racquets over the course of a year. That is, the demand can be increased by up to 4 times its average load during certain hectic parts of the year (professional tournaments, holidays, and competitive seasons). Not meeting this demand can lead to upset customers, unnecessary waste and replacing of rushed items and shipping costs, and a discouraged customer service representative workforce. The objective of this project is to use a set of checklists to address this problem and attempt to increase …

Sample Size Effect On Combustion Analysis, Osueke C. O, Uguru Okorie Daniel, Aondoyila Kuhe

Innovative Research Publications IRP India

Engine parameters vary from one cycle to the other and this makes engine analysis with data from a single working cycle insufficient in capturing or modelling an engine behaviour. The variation observed in engine has necessitated the use sample sizes of data obtained during an engine operation to obtain results that are representative of the engine being investigated. Research has shown that the use of very large data sample size increases the storage needed and processing time and does not necessary give better results over results obtained with lesser sample sizes. The number of sample size to use for analysis …

Cost Effective Analysis Of Big Data, Steven J. Litzsinger, Nehad Dababo

Industrial and Manufacturing Engineering

Executive Summary

Big data is everywhere and businesses that can access and analyze it have a huge advantage over those who can’t. One option for leveraging big data to make more informed decisions is to hire a big data consulting company to take over the entire project. This method requires the least effort, but is also the least cost effective. The problem is that the know-how for starting a big data project is not commonly known and the consulting alternative is not very cost effective. This creates the need for a cost effective approach that businesses can use to start …

Analysis Of 3d Printer Schedule, Colin B. Mclane

Industrial and Manufacturing Engineering

With recent innovations in technology, 3D printing has become a rapidly expanding manufacturing method that is being used for a wide range of applications. Their ability to build parts layer by layer instead of cutting away initial material allows this method to have almost no wasted material, creating the potential for a much more efficient, cost effective process. In order to continue the growth of this manufacturing strategy, the performance of 3D printers need to be enhanced to ensure equal or higher quality of produced parts in comparison to other manufacturing methods that are more commonly used. One important part …

Systems Modeling And Economic Analysis Of Photovoltaic (Pv) Powered Water Pumping Brackish Water Desalination For Agriculture, Michael A. Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The objective of this study was to determine the economic viability of solar powered water pumping and desalination systems for agriculture. Growing global demand for agricultural production has put increased pressure on limited freshwater resources in various locations around the word. Many areas have low quality groundwater resources that have not been utilized for agriculture due to limited availability to electricity, high operational costs of diesel generators and the economics associated with water pumping and processing. Reverse osmosis is a desalination technology that removes salts and other minerals from low-quality water, making it fit for drinking or irrigation. Reduced costs …

A Collaborative Conceptual Aircraft Design Environment For The Design Of Small-Scale Uavs In A Multi-University Setting, Joseph Samuel Becar

Theses and Dissertations

In today's competitive global market, there is an ever-increasing demand for highly skilled engineers equipped to perform in teams dispersed over several time-zones by geography. Aerospace Partners for the Advancement of Collaborative Engineering (AerosPACE) is a senior design capstone program co-developed by academia and industry to help students develop the necessary skills to excel in the aerospace industry by challenging them to design, build, and fly an unique unmanned aerial vehicle (UAV). Students with little to no experience designing UAVs are put together in teams with their peers from geographically dispersed universities. This presents a significant challenge for the students …

Computational Representation Of Linguistic Semantics For Requirement Analysis In Engineering Design, Alex Lash

All Theses

The objective of this research is to use computational linguistics to identify semantic implicit relationships between text-based relationships. Specifically, natural language processing is used to implement linguistic semantics in requirement analyzers. Linguistic semantics is defined as the meaning of words beyond their string form, part of speech, and syntactic function. Many existing design tools use part of speech tagging and sentence parsing as the foundation of their requirement analysis but ultimately use string algorithms to evaluate requirements. These string algorithms cannot capture the implicit knowledge in requirements. This research compares five methods of requirement analysis. A manual analysis provides the …

School Van Access In Nepal, Edgar Corona, Humberto Maldonado, Josh Schiesl

Mechanical Engineering

A need has been identified by a school in Nepal intended for children with Cerebral Palsy, called Sathi Sansar, to develop a more effective solution to loading and unloading students onto the school’s Toyota HiAce van. Currently, a combination of the driver, parents and teachers manually help the students on and off the van. However, this task has proven to be both laborious and time consuming for all parties involved. A solution to this problem needs to be designed and one is currently being developed by a team of engineering students from California Polytechnic State University-San Luis Obispo and Katmandu …

Multi Rotor Wind Turbine Design And Cost Scaling, Preeti Verma

Masters Theses 1911 - February 2014

The current generation wind turbines are upscaled into multi megawatt range in terms of output power. However, the energy benefit from the turbine is offset by the increased mass and cost. Twenty MW wind turbines are now feasible with rotor diameters up to 200 m, according to a new report from the EU-funded UpWind project in 2011. The question is, how much bigger can wind turbines get realistically? One concept worth considering, and the one that is the subject of this thesis, is to have more than one rotor on a single support structure. Such turbines could have a greater …

Mechanical And Thermal Properties Of Polypropylene Reinforced By Calcined And Uncalcined Zeolite, Nurdin Bukit

Makara Journal of Technology

This study was carried out to compare mechanical and thermal properties of polypropylene (PP) reinforced with uncalcined and calcined zeolites. The PP samples were reinforced with zeolites at various quantities of 2, 4, and 6 (wt %). The comparison of the two types of zeolite was based on mechanical properties, including tensile strength, elongation at break, and Young’s modulus, and thermal characteristics analyzed using DSC, and DTA/TGA technique. The results obtained clearly revealed that both zeolites were able to significantly increase tensile strength and Young’s modulus of the samples, with calcined zeolite was found to work better. Addition of calcined …

A Finite Element Approach To Stress Analysis Of Face Gears, Lokamanya Siva Manohar Rampilla

ETD Archive

Face Gears have alternative gear-teeth configuration compared to Bevel Gears. Face Gear have a standard spur pinion as opposed to a bevel Gear. This work concentrates on modeling of a Face-gear, Meshed with a spur gear, using CAD Software and Finite Elements Analysis. The bending stress developed at the gear teeth is determined. Numerical results are validated using the bending stress developed between two involute spur gears

Performance Analysis Of Solar Walls In Minnesota: Final Project Report, Patrick A. Tebbe, Saeed Moaveni, Louis Schwartzkopf

Mechanical and Civil Engineering Department Publications

A study of unglazed transpired solar collectors (referred to as solar walls for this report), has been undertaken. Several installations in the Twin Cities, MN region have been identified, researched, and studied. A combination of weather stations, data logging systems, and building energy management systems were used to collect experimental data on four buildings. Performance calculations were then performed for these buildings and compared with various performance/modeling tools.

Online Real-Time Water Quality Monitoring And Control System, Paul Duffy, Gerard Woods, James Walsh, Michael Kane

Conference Papers

No abstract provided.

Methods To Streamline Laminate Composite Design, Analysis, And Optimization, Ammon Ikaika No Kapono Hepworth

Theses and Dissertations

Advanced composite materials have seen major market growth in recent years due to their high strength and low weight properties. These materials are often made using a process that creates a composite laminate by stacking several composite layers together. However, the design, analysis and optimization of laminate composite materials are often a labor intensive process when done manually. This thesis discusses CAD independent algorithms that are integrated into commercial CAD tools to streamline these processes. Methods have been developed to automatically create 3D ply geometry for a laminate composite lay-up, streamline the creation of a laminate composite finite element model …

Sensitivity Analysis Of The Johnson-Cook Plasticity Model For Hypervelocity Impacts: A Hydro-Code Study, Carlos David Castellanos

Open Access Theses & Dissertations

Computer simulations have been in use for decades in the modeling of hypervelocity impacts and general large deformation problems. Several computer codes have been developed to simulate this type of problems under a variety of geometric configurations and for any number of materials. These codes make use of several constitutive material models to simulate the response of the material under a variety of thermo-mechanical conditions. The Johnson-Cook constitutive model is widely used in the simulation hypervelocity impacts for the simulation of crater formation and even perforation of target structures. This thesis presents the results of a sensitivity study of this …