Engineering Commons^™

Resilience-Related Competencies In Engineering Education – Mapping Abet, Eur-Ace And Cdio Criteria, Ann-Kristin Winkens, Felix Engelhardt, Carmen Leicht-Scholten

Research Papers

In view of the increasing intensity and frequency of natural disasters due to climate change, engineers need to be able to design systems and infrastructures that are resilient to disruptions. Resilience, here, describes the ability of systems to not only be prepared for sudden crises and to recover from these, but also to learn in order to build adaptive capacity. However, research has shown that there is a lack of system resilience and related competencies in engineering education at various levels. First, there are only a few studies that address resilience on a system level in engineering education. Second, studies …

A Critical Realist Investigation Into The Development Of Engineering Ethics Education, Diana Adela Martin, Eddie Conlon, Brian Bowe

Research Papers

The paper reflects on the use of critical realism as a theoretical lens for examining the provision of ethics in engineering programmes and putting forward recommendations for the development of engineering ethics education. It is based on a large scale 4-year mixed methods study in which 23 engineering programmes from 6 higher education institutions in Ireland participated. The methods used include documentary analysis of programme documents, course syllabus and accreditation reports, interviews with instructors and members of accreditation panels, participant observation at accreditation events and a descriptive statistical analysis of the numerical grade used by engineering programmes to self-assess their …

Embedding Sustainability In The Engineering Curriculum: Meeting The Requirements Of Professional Accreditation, Darren Carthy, Richard Manton, Louise O' Gorman

Practice Papers

Professional accreditation agencies are increasing requirements on sustainability in engineering education as a response to ethical obligations, industry needs and emerging academic best practice. In 2021, Engineers Ireland increased sustainability requirements in new accreditation criteria. This paper reports on a thematic analysis carried out by Engineers Ireland on the self-assessment and achievement of these new accreditation criteria on sustainability. The analysis was conducted on the self-assessment reports from a large Irish University, referred to as University A hereafter. The results indicate that, for the purpose of meeting accreditation requirements, University A has interpreted sustainability in their programmes as either meeting …

Opportunities And Barriers Faced By Early-Career Civil Engineers Enacting Global Responsibility, Shannon Chance, Inês Direito, John Mitchell

Articles

The term ‘global responsibility’ projects a holistic sense of ethics, sustainability, and obligation. To achieve the long-term viability of human life on Earth, civil engineering must be conducted in increasingly responsible ways, and civil engineers must value and enact global responsibility in their work. Interviews conducted with nine civil engineers in London provide insight regarding engineers’ familiarity with the term, how they learned about it, what opportunities and barriers they face, and what might be done by professional and educational institutions to help them practice more responsibly. Results indicate: the term itself is novel but underlying concepts are not; continuing …

Momentum Towards Incorporating Global Responsibility In Engineering Education And Accreditation In The Uk, Jonathan Truslove, Emma Crichton, Shannon Chance, Katie Cresswell-Maynard

Conference papers

CONTEXT Engineering is uniquely placed to help address global challenges such as those surrounding the climate crisis, and the sustainable use and management of resources. However, studies have found UK engineering companies that have adopted sustainability strategies do not have enough staff with the skills to achieve them. There is an urgent need to upskill the current workforce and prepare future generations to operate in a responsible and ethical manner in tackling today's challenges. Recent updates to the standard of engineering accreditation in the UK provide notable opportunities to transform university curricula to create globally responsible engineers.

PURPOSE This preliminary …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Integrated Engineering Department Publications

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Reports

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Business In Engineering Education: Issues, Identities, Hybrids, And Limits, Mike Murphy, Pat O'Donnell, John Jameson

Books/Book chapters

This chapter explores how engineering students are broadened in their education through the teaching of non-engineering subjects, such as business subjects, in order to develop critical thinking skills and self-knowledge of what it means to be an engineer. The goal of the chapter is to provide a commentary on the level of interaction, from design of courses to design of curricula, between business faculty and engineering faculty, and the results of that interaction. This chapter sets out to (i) explore whether there appears to be a place in engineering education curricula for reflective critique of assumptions related to business thinking, …

Investigating If Multidisciplinary Or Homogenous Teams Are More Innovative In A Higher Education Setting, Blake Howard Hoover

Theses and Dissertations

This study is derived from the claim that multidisciplinary groups are more innovative than homogeneous groups; a claim that has flooded the business industry and has become criteria for accreditation in higher education. However, the impact of disciplinary diversity in work groups is a growing area of research; therefore, it is yet to be thoroughly understood. The purpose of this study is to answer the question: are multidisciplinary teams more innovative than homogenous teams. To accomplish this university students from differing majors were sorted into multidisciplinary and homogeneous groups while participating in a two-day innovation course. The course taught the …

Curricula Of Atmae Accredited University Programs: Building A Composite, Mark Doggett

SEAS Faculty Publications

The 2017 ATMAE Accreditation Handbook Standard 5 states that each baccalaureate program/ option should meet minimum-maximum semester hour requirements in the foundational areas of general education, mathematics, physical (or life) sciences, management, technical, and electives. The specific credit hours required for each category has a specified range. This study attempted to answer the question of what courses typical ATMAE accredited university programs most frequently require. ATMAE accredits four-year manufacturing, industrial, construction, and information technology programs. To what extent are these accredited programs similar in content? Is there a representative convention of content for university courses?

The objectives of the research …

Text Data Mining Of Aged Care Accreditation Reports To Identify Risk Factors In Medication Management In Australian Residential Aged Care Homes, Tao Jiang, Siyu Qian, David M. Hailey, Jun Ma, Ping Yu

Faculty of Engineering and Information Sciences - Papers: Part B

This study aimed to identify risk factors in medication management in Australian residential aged care (RAC) homes. Only 18 out of 3,607 RAC homes failed aged care accreditation standard in medication management between 7th March 2011 and 25th March 2015. Text data mining methods were used to analyse the reasons for failure. This led to the identification of 21 risk indicators for an RAC home to fail in medication management. These indicators were further grouped into ten themes. They are overall medication management, medication assessment, ordering, dispensing, storage, stock and disposal, administration, incident report, monitoring, staff and resident satisfaction. The …

Database For Online Accreditation Process In Directorate For Accreditation Of Kosovo (Dak-Mis), Ibush Luzha

UBT International Conference

Directorate for Accreditation of Kosovo (DAK) is only National Accreditation Body in Republic of Kosovo, recognized by Government, which in accordance with international standards, assesses technical competences of the Conformity Assessment Bodies (CAB)s that deal with activities such as: testing, calibration, certification and inspection both in public and private sector. Till now application for accreditation and all other procedures for accreditation of CABs are carried out so that all the documents of the application and the receipt of the certificate of accreditation are conducted in the offices of DAK. By Management Information System (MIS), database of DAK (DAK-MIS), customers will …

Educating The Next Generation Of Cyberforensic Professionals, Mark Pollitt, Philip Craiger

J. Philip Craiger, Ph.D.

The Search For Design In Electrical Engineering Education, David Kerns, Sherra Kerns, Mark Somerville, Gill Pratt, Jill Crisman

Mark Somerville

The importance of "design" in engineering education is well established and a cornerstone of most new engineering curricula as well as accreditation criteria Electrical and computer engineering (ECE) programs view many elements of design in ways similar to other engineering disciplines. However, in some respects other disciplines within engineering, such as Mechanical Engineering (ME), view design in broader terms, and perhaps gain value that electrical and computer engineering educators may miss. This paper describes how design is typically viewed in ECE programs, bow it's viewed in other engineering areas, particularly ME, and suggests some new possibilities for enhancing design education …

Asee_Eld2012inforlit Faculty Collaboration.Pptx, Patricia Watkins

Patricia Watkins

The Search For Design In Electrical Engineering Education, David V. Kerns, Sherra E. Kerns, Mark Somerville, Gill Pratt, Jill Crisman

Sherra E. Kerns

The importance of "design" in engineering education is well established and a cornerstone of most new engineering curricula as well as accreditation criteria Electrical and computer engineering (ECE) programs view many elements of design in ways similar to other engineering disciplines. However, in some respects other disciplines within engineering, such as Mechanical Engineering (ME), view design in broader terms, and perhaps gain value that electrical and computer engineering educators may miss. This paper describes how design is typically viewed in ECE programs, bow it's viewed in other engineering areas, particularly ME, and suggests some new possibilities for enhancing design education …

The Search For Design In Electrical Engineering Education, David V. Kerns, Sherra E. Kerns, Mark Somerville, Gill Pratt, Jill Crisman

David V. Kerns

The importance of "design" in engineering education is well established and a cornerstone of most new engineering curricula as well as accreditation criteria Electrical and computer engineering (ECE) programs view many elements of design in ways similar to other engineering disciplines. However, in some respects other disciplines within engineering, such as Mechanical Engineering (ME), view design in broader terms, and perhaps gain value that electrical and computer engineering educators may miss. This paper describes how design is typically viewed in ECE programs, bow it's viewed in other engineering areas, particularly ME, and suggests some new possibilities for enhancing design education …

Missouri S&T Engineering Management Capstone Senior Design: Lessons Learned And Challenges To Come, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

A more traditional, capstone senior design course was recently added as a requirement for Engineering Management undergraduates in the Engineering Management & Systems Engineering Department at Missouri S&T. The case studies course that had served that purpose was deemed to be insufficient for ABET accreditation purposes by department faculty. The most recent 2008 accreditation visit for the department verified this belief and caused the department to launch the new class earlier than anticipated to prove the class would be taught and that it would meet required standards. Thus, no weaknesses or concerns were noted in this area in the final …

The Impact Of Multiple Computing And Digital Arts Degrees On Undergraduate Recruitment, Amber Settle, Liz Friedman, Mary Jo Davidson

Amber Settle

Using Abet Assessment Requirements As A Catalyst For Change: Enhancing And Streamlining The Engineering Management Undergraduate Program At Missouri S&T, Stephen A. Raper, Susan L. Murray, Christa Moll Weisbrook, William Daughton

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Engineering Management (EM) undergraduate degree program at Missouri University of Science & Technology (formerly University of Missouri-Rolla) was the first program of its kind. The program started over 40 years ago and it is one of only five ABET accredited undergraduate EM programs [1]. The initial degree program included a senior year of management courses in conjunction with three years of courses in common engineering disciplines such as mechanical, electrical, and civil engineering. In the 1990s the program underwent a major restructure and students combined core engineering management classes with an emphasis area inside the department. Industrial, manufacturing, packaging, …

Preparation & Accreditation Of Level 7 Engineering Programmes, Mark Mcgrath

Conference Papers

Accreditation of 3rd level educational programmes by a suitably recognised professional body is of particular relevance in relation to engineering. The completion of a sequence of modules which leads to the attainment of this professionally recognised award is viewed as integral to the undertaking. The engineering technology fields are developing and expanding rapidly and the third level sector must keep abreast of these changes. This is essential if the third level institutions wish to continue delivering programmes which produce graduates who can successfully complete the transition from 3rd level to the various engineering sectors. This paper outlines various aspects of …

Preparation And Accreditation Of Level 7 Engineering Programmes, Mark Mcgrath

Conference Papers

Accreditation of 3^rd level educational programmes by a suitably recognised professional body is of particular relevance in relation to engineering. The completion of a sequence of modules which leads to the attainment of this professionally recognised award is viewed as integral to the undertaking. The engineering technology fields are developing and expanding rapidly and the third level sector must keep abreast of these changes. This is essential if the third level institutions wish to continue delivering programmes which produce graduates who can successfully complete the transition from 3rd. Level to the various engineering sectors.

This paper outlines various aspects …

Review Of The American Society For Engineering Education (Asee) Global Colloquium, Cape Town, South Africa, Philip A. Reed

STEMPS Faculty Publications

The following report addresses topics established by the Technical Foundation of America prior to attending the ASEE Global Colloquium October 19-24, 2008 in Cape Town South Africa. Specifically, this manuscript will address what the international engineering education community and the technology education community might have to offer each other. Responses appear below each of the three categories: impacts on curriculum, professional development, and collaboration.

Sheep Updates 2007 - Part 4, Dean Thomas, Dominique Blache, Dean Revell, Hayley Norman, Phil Vercoe, Zoey Durmic, Serina Digby, Di Mayberry, Megan Chadwick, Martin Sillence, David Masters, R. Silberstein, F. Byrne, P. G. H. Nichols, J. Young, L. Aitkins, M. G. Wilmot, A. J. Rintoul, T. Lambert, D. R. Mcclements, P. Raper, P. Ward, C. Walton, T. York, David Pethick, David Hopkins, Malcolm Mcphee, D. B. Savage, J. V. Nolan, I. R. Godwin, A. Aoetpah, T. Nguyen, N. Baillie, C. Lawler, Ken Geenty, John Smith, Darryl Smith, Tim Dyall, Grant Uphill, John Young, Michael Paton, John Dorrian

Sheep Updates

This session covers eight papers from different authors:

GRAZING

1. The impact of high dietary salt and its implications for the management of livestock grazing saline land, Dean Thomas, Dominique Blache, Dean Revell, Hayley Norman, Phil Vercoe, Zoey Durmic, Serina Digby, Di Mayberry, Megan Chadwick, Martin Sillence and David Masters, CRC for Plant-based Management of Dryland Salinity, Faculty of Natural & Agricultural Sciences, The University of Western Australia, WA.

2. Sustainable Grazing on Saline Lands - outcomes from the WA1 research project, H.C. Norman^1,2, D.G. Masters^1,2, R. Silberstein^1,2, F. Byrne^2,3, P.G.H. Nichols …

Global Challenges As Inspiration: A Classroom Strategy To Foster Social Responsibility, Linda Vanasupa, Lynn Slivovsky, Katherine C. Chen

Materials Engineering

Social responsibility is at the heart of the Engineer’s Creed embodied in the pledge that we will “dedicate [our] professional knowledge and skill to the advancement and betterment of human welfare...[placing] public welfare above all other considerations.” However, half century after the original creed was written, we find ourselves in a world with great technological advances and great global-scale technologically-enabled peril. These issues can be naturally integrated into the engineering curriculum in a way that enhances the development of the technological skill set. We have found that these global challenges create a natural opportunity to foster social responsibility within the …

Engineering Management At Umr -- Alumni Voices, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Department of Engineering Management at the University of Missouri-Rolla is among the oldest of its kind in the United States, and has over 2000 Bachelors level alumni graduates. The Department will undergo ABET accreditation under the new assessment based criteria in the fall of 2002. The new criteria specify that engineering programs should seek to continuously improve their degree offerings through an ongoing assessment process that includes constituent input. Our own department has specified undergraduate alumni as one of the prime or key constituents that will be queried for input into our own processes. For the first time in …

Electromagnetic Engineering In The 21^{St} Century: Challenges And Perspectives, Leopold B. Felsen, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

This paper aims at a broad-brush look at certain technological and educational challenges that confront wave-oriented electromagnetic (EM) engineering in the 21^{st} century, in a complex computer and technology-driven world with rapidly shifting societal and technical priorities. Simulation strategies for complex EM systems, both analytic and numerical, are reviewed and categorized, and are illustrated on selected practical complex multicomponent system scenarios currently under investigation in Turkey. Educational issues to ensure proper multidisciplinary exposure of new generations of computer-weaned students, who will have to deal with these problems, are touched upon as well.

Integration Of Csab And Abet, Lee W. Saperstein, Kenneth Martin, Doris K. Lidtke

Mining Engineering Faculty Research & Creative Works

The Accreditation Board for Engineering and Technology, Inc. (ABET) and the Computing Sciences Accreditation Board (CSAB) signed a Memorandum of Agreement in November 1998 to integrate CSAB''s accreditation services with ABET, with a transition time of approximately two years. During the interim period, the operations of the Computer Science Accreditation Commission (CSAC) are contracted by CSAB to ABET. A committee with CSAC, CSAB, and ABET representation is working to set up the new commission for accrediting programs in the computing sciences. This new commission will probably be called the Computing Accreditation Commission (CAC). Other activities are underway to try to …