Engineering Commons^™

2020 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

A Deep Machine Learning Approach For Predicting Freeway Work Zone Delay Using Big Data, Abdullah Shabarek

Dissertations

The introduction of deep learning and big data analytics may significantly elevate the performance of traffic speed prediction. Work zones become one of the most critical factors causing congestion impact, which reduces the mobility as well as traffic safety. A comprehensive literature review on existing work zone delay prediction models (i.e., parametric, simulation and non-parametric models) is conducted in this research. The research shows the limitations of each model. Moreover, most previous modeling approaches did not consider user delay for connected freeways when predicting traffic speed under work zone conditions. This research proposes Deep Artificial Neural Network (Deep ANN) and …

High-Speed Rail Safety Analysis Based On Dual-Weighted Complex Network, Liu Lv

Dissertations

This study uses a complex network model to analyze the causes of accidents in high-speed railway operations. By identifying the key factors that led to high-speed railway accidents, hidden safety hazards were discovered. This will help improve the operational safety of the U.S. high-speed rail line under construction.

The analysis uses the regional high-speed railway network in Guangzhou, China as a case study, including the railway (including high-speed railway) accidents that occurred in the company's jurisdiction from 2013 to 2017. With comparative analysis between general railways and high-speed railways, the changes of high-speed railway safety factors are explored. Data analysis …

Characterizing Reactive Iron Mineral Coatings And Their Roles In Natural Attenuation At A Site With Historical Contamination, Han Hua

Dissertations

Reactive iron mineral coatings in redox transition zones play an important role in contaminant attenuation. These mineral coatings include poorly crystalline to crystalline iron sulfides, carbonates, and oxyhydroxides, and are a signature of the biogeochemical processes occurring. To better understand these processes, reactive iron mineral coatings are characterized in an 18-m Anaerobic Core collected from a contaminated industrial site. This study targets redox transition zones uncovered in the core. A suite of complementary analyses is applied to distinguish the surface coating mineralogy using X-ray Diffraction, X-ray fluorescence, and field-emission scanning electron microscopy (FESEM) with energy dispersive X-ray analyzer (EDX). In …

The Stability Of Nanobubbles And Its Application In Contaminated Sediment Treatment, Shaini Dilsha Aluthgun Hewage

Dissertations

This dissertation consists of two sections. First, nanobubbles' stability and behavior are studied using experimental and theoretical approaches. Second, nanobubbles application combined with ultrasound to remediate contaminated sediments is discussed.

The stability study consists of four sections. (i). Laboratory investigation to determine bubble size distributions and zeta potentials for different gases, pH levels, temperatures, and salt conditions. (ii). A theoretical study based on the diffused double layer theory to explain nanobubbles' behavior in different NaCl concentrations. (iii). Nanobubbles' stability in electrolyte solutions under different ion valencies using deionized water, NaCl, Na₂SO₄, Na₃PO₄, …

A Review Of Different Aspects Of Applying Asphalt And Bituminous Mixes Under A Railway Track, Kazem Jadidi, Morteza Esmaeili, Mehdi Kalantari, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Asphalt is a common material that is used extensively for roadways. Furthermore, bituminous mixes have been used in railways, both as asphalt and as mortar. Different agencies and research institutes have investigated and suggested various applications. These studies indicate the benefits of bituminous material under railways, such as improving a substructure’s stiffness and bearing capacity; enhancing its dynamic characteristics and response, especially under high-speed train loads; waterproofing the subgrade; protecting the top layers against fine contamination. These potential applications can improve the overall track structure performance and lead to minimizing settlement under heavy loads. They can also guarantee an appropriate …

A Review Of Different Aspects Of Applying Asphalt And Bituminous Mixes Under A Railway Track, Kazem Jadidi, Morteza Esmaeili, Mehdi Kalantari, Mehdi Khalili

Civil and Environmental Engineering and Construction Faculty Research

Asphalt is a common material that is used extensively for roadways. Furthermore, bituminous mixes have been used in railways, both as asphalt and as mortar. Different agencies and research institutes have investigated and suggested various applications. These studies indicate the benefits of bituminous material under railways, such as improving a substructure’s stiffness and bearing capacity; enhancing its dynamic characteristics and response, especially under high-speed train loads; waterproofing the subgrade; protecting the top layers against fine contamination. These potential applications can improve the overall track structure performance and lead to minimizing settlement under heavy loads. They can also guarantee an appropriate …

River & Estuary Observation Network: Refinement Of Stage Height Sensor Subsystem For Low Cost And High Reliability, W. D. Kirkey, C. B. Fuller, P. O'Brien, P. J. Kirkey, Ahmed Mahmoud, Andrew Ernest, Javier Guerrero

Civil Engineering Faculty Publications and Presentations

A system comprised of software and on-site measurements is presented for accurately obtaining water stage data from vented or non-vented submersible pressure sensors installed at autonomous stream gauging stations. The system accounts for pressure sensor offset errors, water density, and local gravitational acceleration to produce a stage height reading which is accurate to either ±0.01 ft (±3 mm) or to the accuracy limit of the sensor, whichever is greater. A 2nd order polynomial expression for determination of water density from temperature and salinity is developed and found to be sufficiently accurate for this purpose. Simulated stage measurements performed in the …

Incident Duration Time Prediction Using A Supervised Topic Modeling Method, Jihyun Park

Theses

Precisely predicting the duration time of an incident is one of the most prominent components to implement proactive management strategies for traffic congestions caused by an incident. This thesis presents a novel method to predict incident duration time in a timely manner by using an emerging supervised topic modeling method. Based on Natural Language Processing (NLP) techniques, this thesis performs semantic text analyses with text-based incident dataset to train the model. The model is trained with actual 1,466 incident records collected by Korea Expressway Corporation from 2016-2019 by applying a Labeled Latent Dirichlet Allocation(L-LDA) approach. For the training, this thesis …

Examining Bicycle And Motorized Vehicle Speeds And Their Relationships In The Context Of Urban Roadways, Jaclyn Sue Schaefer

Dissertations and Theses

This thesis presents a compilation of papers exploring passenger car and bicycle speeds through their interactions with each other and with urban roadway factors.

First, following a concern raised in part of the traffic literature that a large mode shift toward bicycling may cause travel time delays and potentially exacerbate congestion instead of alleviate it unless bicycle lanes are installed, an empirical study detailing how the presence of bicycles on urban roads without bicycle lanes may affect passenger car speeds is presented. Pneumatic tube data from six predominantly low speed, low volume roads in Portland, Oregon were utilized to identify …

Hydraulic Elevator For Purification Of Water Supply Facilities Of The Reservoir, F.Sh. Shaazizov

Irrigation and Melioration

To clarify the granulometric composition of the deposited sediments at the inlet head of the water intake of the outlet of the Tupolangskiy reservoir, samples of bottom sediments were taken and their granulometric composition was analyzed in laboratory conditions. Near the water area of the water intake of the 1st tier of the Tupolang reservoir, the deposited sediments are represented by smaller particles, the diameter of which ranges from 5 mm to 0.1 mm and their percentage is 95%. The main results on the calculation and substantiation of the parameters of the hydraulic elevator for cleaning the water area of …

Results Of A Numerical Study Of Currents In The Vicinity Of A Damless Water Intake, D.R. Bazarov, O.F. Vokhidov, M. Tashkhanova, F. Uljayev

Irrigation and Melioration

The problem of sustainable water intake in the conditions of significant fluctuations of flow rates and water level is significantly exacerbated by erosion of river beds. A typical example of such conditions is the damless water intake into the Karshi Main Canal (KMC) where the main flow of the Amudarya river continuously moves along a wide floodplain, changing the direction of currents. As a result, it is very difficult to withdraw the required volume of water from the river to the canal especially during dry years due to the high instability of currents at the entrance to the canal. Within …

Prospects For Solving The Problem Of Rational Use Of Water Resources Using The Tiiame-1 Sprinkling Machine, M.Kh. Khamidov, A.R. Muratov

Irrigation and Melioration

The information published by the International Commission on Irrigation and Drainage, and the intermediate results of many years of research carried out by scientists from TIIAME on the development, research and implementation of water-saving technologies in agriculture are presented. The acute shortage of water resources in Central Asia, the problems of increasing the efficiency of the use of water-saving technologies around the world have led to the careful use of available water resources in the region, including the prospects and advantages of using irrigation of crops by sprinkling, as well as the design and technical parameters of the sprinkler developed …

Inadequacy Of Current Water Use Planning At The Level Of Water Users And Wuas, A.A. Alimdjanov, A.Kh. Karimov, B.R. Nasibov

Irrigation and Melioration

This paper studies the main issues of water use planning at the level of water consumers and water user associations (WUA). The study carried out in Bulakbashi district of Andijan province of Uzbekistan, where the main source of irrigation water is the Southern Fergana Main Canal. The study followed two-stage procedure. During the first stage we compiled water use plans for the WUA and water consumers based on the applied methodology of water use planning. Then, at the second stage, we analyzed the results of the actual implementation of the farm water consumption plans and WUA water use plan, and …

Technology And Technical Device Used In The Efficient Use Of Water Resources In Irrigated Agriculture, А.U. Аtajanov

Irrigation and Melioration

The economical use of water resources, the improvement and development of new technology and technical means for its implementation, ensuring the saving of irrigation water is one of the most important issues of today. This article is devoted to the issues of improving the technology of irrigation of furrows and the creation of technical means,also recommended technology and using from created technical device in selected per experiment fields and analyzing their results.

Empirical Assessment Of Climate Change Impacts On Agriculture In Samarkand Region, Sh.B. Babakholov

Irrigation and Melioration

Agricultural production is highly sensitive to climate factors like other endogenous factors, and the expected climate change projections may have a negative impact on the efficiency and income of agricultural producers. Therefore, this study aims to analyze the impact of changes in climatic factors (average air temperature and precipitation) on the technical efficiency of cotton growing farmers as its determinants in Samarkand region. Empirical analyzes were performed on the cases of 1141 cotton-growing farms using panel-based Time-Invariant Inefficiency model. According to the results of the analysis, cotton farms in the region have an average technical efficiency of 76%, which in …

Car Wash Complex – Object Of Harmful Impact On Water Resources, M. Radkevich, K. Shipilova, M. Abdukodirova, O. Pochugevski

Irrigation and Melioration

Deals with the problem of the impact of car wash complexes in the city of Tashkent on water resources. The analysis of the technological process of washing and a sociological survey of car owners and employees of car washes revealed the average amount of water used per car wash per year, as well as the amount of harmful substances entering the sewer network of the city of Tashkent. Calculations have shown that the annual water consumption only for passenger cars in Tashkent is about 4.34 million m³, and the wastewater is not properly treated. From one car wash …

Agrochemical Indicators Of New Irrigated Graph-Meadow Soils Formed On The Iii Underfladder Terrace Of Syrdarya, J.M. Kuziev

Irrigation and Melioration

Presents material on the geographical location, geomorphological and geological structure, as well as the agrochemical state of irrigated serozem-meadow soils, common in the Mirzaabad district of the Syrdarya region. According to the data obtained on the chemical analysis of soils, the studied soils are medium- and heavily loamy in texture, where particles of coarse sand predominate (0.05-0.01%). In the arable horizon of these soils, the humus content is 1.088-1.214%, total nitrogen 0.079-0.089%, total phosphorus 0.109-0.124%, and total potassium within 1.15-1.24%, and on the basis of these data, a regularity of the underlying horizon of these soils. The degree of provision …

Water Efficient Technology Of Drip Irrigation In Intensive Gardens, F.U. Juraev, G.H. Karimov

Irrigation and Melioration

The studies were carried out in 2017-2019 at the Zodabek farm on a 6 hectare garden plot with seedlings of half-tall apple trees “Golden Delicious”. Experimental research work was carried out at a groundwater level in the experimental area of 1.5-2.0 m, mineralization 1.0-1.2 g/l in alluvial, mechanical, medium sandy soils with the following irrigation options. The first option is irrigation, at the start of the second - drip irrigation; third, the use of specially designed soil pegs. The following results were obtained: in the control option, the average irrigation rate for three years was 1125.7 m3/ha, with drip irrigation …

Extinguishing Excess Flow Energy In Spillway Structures, D.R. Bazarov, S.K. Khidirov, O.F. Vokhidov, M. Tashkhanova, A. Gayur

Irrigation and Melioration

Presents the results of experimental studies aimed at developing a new damper design at the spillway structure. The analysis of the distribution diagrams of the velocities at the spillway was carried out, the results of which showed that the bottom flow velocity is higher than the surface velocity by 3–17%. According to the research results, it was found that in the second variant of the research this increase is 2–22%. The maximum values of specific flow rates in the first variant of the study in the apron varied relative to the downstream stilling well within 1.5–40%, in the second variant …

Experimental Bases Of Determining The Hydraulic Friction Coefficient In Preasure Systems Fo Sediment Flow, A.M. Arifjanov, Q.Т. Rahimov, A.D. Abduraimova, S.N. Xoshimov

Irrigation and Melioration

When the fluid moves in pressure pipelines, the determination of the coefficient of hydraulic friction is very important. To determine the coefficient of hydraulic friction during the movement of a homogeneous fluid, there are formulas that have a theoretical basis and experimental confirmation. Determination of the coefficient of hydraulic friction is much more complicated when there is a turbid flow in the pipeline, in such cases laboratory experiments are necessary. The article deals with the issue of experimental determination of the coefficient of hydraulic friction during the movement of slurry in pressure systems. The experimental results are processed based on …

Forecasting The Dynamics Of Cotton Yield In The Ferghana Region, V. Vakhobov, А.А. Faiziev

Irrigation and Melioration

Observations of a certain phenomenon, the nature of which changes over time, give rise to an ordered sequence, which is called a time series. In the article, using the method of statistical time series analysis, statistical pattern of time series Y₁ – average yield of cotton in Fergana region of the Republic of Uzbekistan(on materials of CSB of the Republic of Uzbekistan for 1991-2018 years). Point and interval estimates for the average cotton yield were constructed with a 95% guarantee, explicit types of trends were determined, and the yield in the region was predicted for subsequent years. Using statistical …

Hydraulic Elevator For Purification Of Water Supply Facilities Of The Reservoir, R.R. Ergashev, F. Atrikbekova, H. Khusanboeva, B.T. Kholbutaev, N.A. Babazhanov

Irrigation and Melioration

The purpose of the research is to increase the efficiency of pumping stations operation by improving the methods of uniform flow spreading in the front chamber and inlet of the pumping station and developing constructive measures to improve the hydraulic conditions for supplying the flow to the pumps. The improvement of the method of hydraulic calculation of the flow in the front chamber and the water intake chamber is given on the example of the head pumping station of the Jizzakh cascade. In the process of research, standard methods of full-scale and bench tests of pumps, methods of mathematical and …

Energy-Saving Structure Justification Powerful Tractor And Modern Agricultural Machine, A.K. Igamberdiyev, N.A. Khalikova, N.B. Razikov, O.E. Usarov

Irrigation and Melioration

Discusses the fact that machine-tractor units (MTA) from high-power tractors are often not fully used due to errors in the design and operation of units, their ability to work under certain operating conditions with maximum efficiency and minimum fuel consumption, a method of completing a machine-tractor unit from a high-power technical means is proposed, which ensures the required quality of the technological operation, maximum efficiency and minimum fuel consumption, which must be performed under certain operating conditions. To study the power balance of energy-saving units, consisting of powerful tractors and modern agricultural machinery, an analysis was carried out of a …

Innovative Technologies In The Assessment Of Accumulation And Erosion Processes In The Channels, A.M. Arifjanov, T.U. Apakhujayeva, D.E. Atakulov, S.N. Xoshimov

Irrigation and Melioration

The article discusses the possibilities of assessing the state of river beds and changes in them using remote sensing technologies (RS) and geographic information systems (GIS). With the help of geoinformation technologies, an assessment of deformation phenomena over the past 25 years in the channel of the Sokh river, which was chosen as the object of research, was given. Channel phenomena have been studied using data obtained from satellites. To analyze the situation, a model of the Landsat satellite was selected. The currently widely used official Glo Vis website was used to download the data. Data analyzed using ArcMap software. …

Traction Control Of The Friction Drive Of The Vertical Spindle, M. Shoumarova, T. Abdillaev, Sh.A. Yusupov, Ch.A. Shermatova

Irrigation and Melioration

The main indicator in assessing the quality of the work of cotton pickers is its completeness of picking cotton, among the factors that predetermine the completeness of picking a special place is occupied by the direction and magnitude of the absolute speed of the spindle tooth. Among the factors affecting the absolute speed of the tooth, the main place is occupied by the angular speed of rotation of the spindle around its own axis, which depends on the quality of functioning of the friction drive of the spindle. This drive does not always provide its required traction capacity, since due …

Research The Chopper Apparatus Of Equipment For Chopping Pressed Rough Fodders, Sh.H. Gapparov, N.A. Ashurov

Irrigation and Melioration

Livestock is one of the most important agricultural sectors in Uzbekistan and it is based on family livestock farms. On family farms, livestock animals are fed with pressed roughage, including corn stalks, alfalfa hay, barbed straw and wheat straw, mixed with concentrated feed. However, due to the lack of small choppers suitable for small farms, the compressed feed is fed to animals without chopping, as a result of which about 25-30 percent of them go to waste and there are large losses. Taking this into account, a small device was developed for chopping pressed roughage and mixing it with concentrated …

Theoretical Research On Determining The Length Of The Shovels Of A Wheel Of Centrifugal Fans, V.A. Arkhipov, D. Dzhuraev, I.Zh. Toirov, A.E. Urishev

Irrigation and Melioration

Presents the results of theoretical research by scientists, carried out scientific work to determine the length of the shovel of a centrifugal fan wheel. A technological scheme for installing a shovel on a fan wheel disk has been developed Analyzes of these works are carried out, which show that the length of the wheel shovel has a significant dependence on the parameters of the wheel (R, R₁), the angle of installation α and the radius of the arc R₃ of the shovel. An analytical dependence is derived for determining the length of the shovel of a …

City Tarmita (Old Termez) In The Kushans’ Period, Mamatmusaev Tohir

The Scientific-Practice Journal of Architecture, Construction and Design

This article is devoted to results of expeditions that were explored by archaeological monuments of Chingiztepa and Karatepa in 2004-2005 yy. in the Old Termez.

Problems And Ways Of Solution In Transit Of Automobile Transport Of The Republic Of Uzbekistan, Aziz S. Khalmukhamedov

Acta of Turin Polytechnic University in Tashkent

Maintaining the transit potential of a country is an integral part of the transport program of any country and vital for the economy. Unsatisfactory transit potential negatively affects the economy. Therefore, it is necessary to survey and establish indicators of the country’s transit potential. The determining factor of the country’s transit potential is the level and condition of the country’s highways. Thus, the indicator of the quality of the road - the flatness of the road - can become the main indicator that can be used for a generalized and quick assessment of the characteristics of the country’s transit potential. …