Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 8 of 8

Full-Text Articles in Engineering

Characterization Of Simulated Low Earth Orbit Space Environment Effects On Acid-Spun Carbon Nanotube Yarns, Ryan A. Kemnitz, Gregory R. Cobb, Abhendra K. Singh, Carl R. Hartsfield Dec 2019

Characterization Of Simulated Low Earth Orbit Space Environment Effects On Acid-Spun Carbon Nanotube Yarns, Ryan A. Kemnitz, Gregory R. Cobb, Abhendra K. Singh, Carl R. Hartsfield

Faculty Publications

The purpose of this study is to quantify the detrimental effects of atomic oxygen and ultraviolet (UV) C radiation on the mechanical properties, electrical conductivity, and piezoresistive effect of acid-spun carbon nanotube (CNT) yarns. Monotonic tensile tests with in-situ electrical resistance measurements were performed on pristine and exposed yarns to determine the effects of the atomic oxygen and UVC exposures on the yarn’s material properties. Both type of exposures were performed under vacuum to simulate space environment conditions. The CNT yarns’ mechanical properties did not change significantly after being exposed to UV radiation, but were significantly degraded by the ...


First‐Principles Study, Fabrication, And Characterization Of (Hf0.2zr0.2ta0.2nb0.2ti0.2)C High‐Entropy Ceramic, Beilin Ye, Tongqi Wen, Kehan Huang, Cai-Zhuang Wang, Yanhui Chu Jul 2019

First‐Principles Study, Fabrication, And Characterization Of (Hf0.2zr0.2ta0.2nb0.2ti0.2)C High‐Entropy Ceramic, Beilin Ye, Tongqi Wen, Kehan Huang, Cai-Zhuang Wang, Yanhui Chu

Ames Laboratory Accepted Manuscripts

The formation possibility of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high‐entropy ceramic (HHC‐1) was first analyzed by the first‐principles calculations, and then, it was successfully fabricated by hot‐pressing sintering technique at 2073 K under a pressure of 30 MPa. The first‐principles calculation results showed that the mixing enthalpy and mixing entropy of HHC‐1 were −0.869 ± 0.290 kJ/mol and 0.805R, respectively. The experimental results showed that the as‐prepared HHC‐1 not only had an interesting single rock‐salt crystal structure of metal carbides but also possessed high compositional uniformity ...


Investigation Of Nondestructive Testing Methods For Friction Stir Welding, Hossein Taheri, Margaret Kilpatrick, Matthew Norvalls, Warren Harper, Lucas Koester, Timothy Bigelow, Leonard J. Bond May 2019

Investigation Of Nondestructive Testing Methods For Friction Stir Welding, Hossein Taheri, Margaret Kilpatrick, Matthew Norvalls, Warren Harper, Lucas Koester, Timothy Bigelow, Leonard J. Bond

Electrical and Computer Engineering Publications

Friction stir welding is a method of materials processing that enables the joining of similar and dissimilar materials. The process, as originally designed by The Welding Institute (TWI), provides a unique approach to manufacturing—where materials can be joined in many designs and still retain mechanical properties that are similar to, or greater than, other forms of welding. This process is not free of defects that can alter, limit, and occasionally render the resulting weld unusable. Most common amongst these defects are kissing bonds, wormholes and cracks that are often hidden from visual inspection. To identify these defects, various nondestructive ...


The Effect Of Fine And Coarse Recycled Aggregates On Fresh And Mechanical Properties Of Self-Compacting Concrete, Mahmoud Nili, Hossein Sasanipour, Farhad Aslani Apr 2019

The Effect Of Fine And Coarse Recycled Aggregates On Fresh And Mechanical Properties Of Self-Compacting Concrete, Mahmoud Nili, Hossein Sasanipour, Farhad Aslani

ECU Publications Post 2013

Today, the use of recycled aggregates as a substitute for a part of the natural aggregates in concrete production is increasing. This approach is essential because the resources for natural aggregates are decreasing in the world. In the present study, the effects of recycled concrete aggregates as a partial replacement for fine (by 50%) and coarse aggregates (by 100%) were examined in the self-compacting concrete mixtures which contain air-entraining agents and silica fumes. Two series of self-compacting concrete mixes have been prepared. In the first series, fine and coarse recycled mixtures respectively with 50% and 100% replacement with air entraining ...


Development Of Heavyweight Self-Compacting Concrete And Ambient-Cured Heavyweight Geopolymer Concrete Using Magnetite Aggregates, Afsaneh Valizadeh, Farhad Aslani, Zohaib Asif, Matt Roso Mar 2019

Development Of Heavyweight Self-Compacting Concrete And Ambient-Cured Heavyweight Geopolymer Concrete Using Magnetite Aggregates, Afsaneh Valizadeh, Farhad Aslani, Zohaib Asif, Matt Roso

ECU Publications Post 2013

Heavyweight self-compacting concrete (HWSCC) and heavyweight geopolymer concrete (HWGC) are new types of concrete that integrate the advantages of heavyweight concrete (HWC) with self-compacting concrete (SCC) and geopolymer concrete (GC), respectively. The replacement of natural coarse aggregates with magnetite aggregates in control SCC and control GC at volume ratios of 50%, 75%, and 100% was considered in this study to obtain heavyweight concrete classifications, according to British standards, which provide proper protection from sources that emit harmful radiations in medical and nuclear industries and may also be used in many offshore structures. The main aim of this study is to ...


Mechanical Characterizations Of 3d-Printed Plla/Steel Particle Composites, Hozhabr Mozafari, Pengfei Dong, Haitham Hadidi, Michael P. Sealy, Linxia Gu Jan 2019

Mechanical Characterizations Of 3d-Printed Plla/Steel Particle Composites, Hozhabr Mozafari, Pengfei Dong, Haitham Hadidi, Michael P. Sealy, Linxia Gu

Mechanical & Materials Engineering Faculty Publications

The objective of this study is to characterize the micromechanical properties of poly-L-lactic acid (PLLA) composites reinforced by grade 420 stainless steel (SS) particles with a specific focus on the interphase properties. The specimens were manufactured using 3D printing techniques due to its many benefits, including high accuracy, cost effectiveness and customized geometry. The adopted fused filament fabrication resulted in a thin interphase layer with an average thickness of 3 μm. The mechanical properties of each phase, as well as the interphase, were characterized by nanoindentation tests. The effect of matrix degradation, i.e., imperfect bonding, on the elastic modulus ...


Effect Of Si And C Additions On The Reaction Mechanism And Mechanical Properties Of Fecrnicu High Entropy Alloy, Hao Wu, Sirui Huang, Huan Qiu, Heguo Zhu, Zonghan Xie Jan 2019

Effect Of Si And C Additions On The Reaction Mechanism And Mechanical Properties Of Fecrnicu High Entropy Alloy, Hao Wu, Sirui Huang, Huan Qiu, Heguo Zhu, Zonghan Xie

ECU Publications Post 2013

FeCrNiCu based high entropy alloy matrix composites were fabricated with addition of Si and C by vacuum electromagnetic induction melting. The primary goal of this research was to analyze the reaction mechanism, microstructure, mechanical properties at room temperature and strengthening mechanism of the composites with addition of Si and C. The reaction mechanism of powders containing (Si, Ni and C) was analyzed, only one reaction occurred (i.e., Si + C → SiC) and its activation energy is 1302.8 kJ/mol. The new composites consist of a face centered cubic (FCC) structured matrix reinforced by submicron sized SiC particles. The addition ...


Fire Performance Of Heavyweight Self-Compacting Concrete And Heavyweight High Strength Concrete, Farhad Aslani, Fatemeh Hamidi, Qilong Ma Jan 2019

Fire Performance Of Heavyweight Self-Compacting Concrete And Heavyweight High Strength Concrete, Farhad Aslani, Fatemeh Hamidi, Qilong Ma

ECU Publications Post 2013

In this study, the fresh and hardened state properties of heavyweight self-compacting concrete (HWSCC) and heavyweight high strength concrete (HWHSC) containing heavyweight magnetite aggregate with 50, 75, and 100% replacement ratio, and their performance at elevated temperatures were explored experimentally. For fresh-state properties, the flowability and passing ability of HWSCCs were assessed by using slump flow, T500 mm, and J-ring tests. Hardened-state properties including hardened density, compressive strength, and modulus of elasticity were evaluated after 28 days of mixing. High-temperature tests were also performed to study the mass loss, spalling of HWSCC and HWHSC, and residual mechanical properties at 100 ...